Re: Debian 7 and external monitors and graphics adaptors
On 2015-04-19, Lisi Reisz lisi.re...@gmail.com wrote: I can't answer the question, but I have just successfully loaded it in Chrome, Iceweasel and Konqueror. In Iceweasel it insisted on cookies. Lisi. The page will not load for me with javascript enabled (I use NoScript). Iceweasal endlessly spins its wheels 'waiting for login.capital.com...' -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/slrnmj75i3.2uk.cu...@einstein.electron.org
Re: Debian 8 release
Hej, Any suggestion for Stockholm meet up? I was thinking about the Carmen pub in Sodermalm and starting earlier, at 4 or 5 pm. Comments and suggestions? http://eatingoutwell.com/en/stockholm/v/carmen/#_=_ Abs, Helio Loureiro http://helio.loureiro.eng.br http://br.linkedin.com/in/helioloureiro http://twitter.com/helioloureiro http://gplus.to/helioloureiro 2015-04-16 18:32 GMT+02:00 j...@lillahusetiskogen.se: On Thu, 16 Apr 2015 18:22:56 +0200 Rolf Edlund rolfew...@gmail.com wrote: Den 16 april 2015 16:43 skrev Erik Kylin e...@erikkylin.net: Jag tro vi skulle kunna ses på Göteborgs universitet, Lindholmen och få med oss lite Vin och öl? Hade varit väldigt trevligt. Problemet där, att det ligger en bra bit från stationen, för dom som åker tåg menar jag. Trevliga lokaler dock. Har varit där på FSCONS några år. Rekommenderas varmt. https://fscons.org/2015/ -- To UNSUBSCRIBE, email to debian-user-swedish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150416183251.6e357b80@igor
Re: I need guidance about how to configure a newly installed Jessie
On Sat, 18 Apr 2015 20:18:17 -0600 Paul E Condon pecon...@mesanetworks.net wrote: On 20150418_1905-0500, David Wright wrote: Quoting Paul E Condon (pecon...@mesanetworks.net): I was running as pec or as root. I forget. Since doing that, I realized that for many years I have been running with my own version of /etc/ssh/ssh.config. Confronted with the evidence, I recall that this was a place I found, through exhaustive search, to turn off the hashing of known_host. I like to be able to identify lines in known_host, because I think each line is a possible access path for a hacker and the sysadmin, namely me, should be able to trace the provenance of all such lines. In short hashing them opens a backdoor more serious than the one it closes, IMHO. I now know that I can put my edits in two places, /home/pec/.ssh/ssh_config and /root/.ssh/ssh_config, and have the same effect. If you're happy with not hashing, you need only put that in /etc/ssh/ssh_config (underscore, not dot) if you remove all other .ssh/ssh_config files. I can envision a different way, but I cannot envision one that does not impact of how Debian wants to configure Jessie. So be it. When upgrade runs, you'll need to keep your configuration and then run diff against the maintainer's version (suffixed .dpkg-new or .ucf-dist or some such) to fold in any changes they've made (likely to be few to none). I have not yet discovered a way to append new known host keys from newly configured hosts into the .ssh/known_hosts files on older computers. known_hosts and authorized_keys are both text files. Each line is independent. You can cat x y to append contents of x to y or insert with an editor. An editor's Insert File is safe, but make sure to reconstruct the lines if cut and paste does any line wrapping, ie ssh-rsa jhdgkhkkdjkjnskjn foo@bar needs to be made back into ssh-rsa jhdgkhkkdjkjnskjn foo@bar IIRC any line from one hosts's or user's known_hosts file will work for another user and/or host, and the same with authorized_keys (though don't mix them up!). I think the removed file was the one associated with either pec, or root, which ever was appropriate for a test. Since doing the tests, I have done a complete re-install. With that removing the appropriate known_hosts file gives me the old familiar option of accepting the risk of man-in-the-middle. There's never a problem with wiping out known_hosts and letting it gradually be rebuilt, particularly if you know the fingerprints thusly: $ ssh-keygen -l -v -f /etc/ssh/ssh_host_ecdsa_key.pub .../ssh-fingerprint As said before, I am working now with a new re-install on my main computer. It is the one on which I am composing this email. This is its /etc/hosts file: 127.0.0.1 localhost 127.0.1.1 big.lan.gnu big 192.168.1.1 rtr.lan.gnu rtr # LAN side of router 192.168.1.10 cmn.lan.gnu cmn 192.168.1.11 big.lan.gnu big 192.168.1.12 gq.lan.gnu gq [...] The top two lines were provided during the running of netinst CD RC2. The rest were provided by me, after I took the CD out of the computer and rebooted. Well I have tried to keep things as simple as possible and I recently decided to call exim's bluff... I don't think I have a problem with exim. I use msmtp to get emails out onto the web. I tried doing it with exim4 about 2yrs ago. It kept breaking so I found alternative for a previous stand-alone smtp agent that was being discontinued due to lack of upstream support at about the same time that Debian was moving from plain exim to exim4. I could try again, but after I get ssh working both directions, I hope. Starting MTA:hostname --fqdn did not return a fully qualified name, dc_minimaldns will not work. Please fix your /etc/hosts setup. exim4 ok ...and configure a null domain (ie no dots in /etc/hosts outside of the IP numbers). Everything still works. With this, I can ssh into 'gq' from 'big', which is my main computer with the big flat screen display. I can open and edit files on 'gq' and the edits will be saved. No problem. But, if I sit down the keyboard and screen connected to 'gq', I cannot do the reverse. On 'gq', the /etc/hosts file contains all the lines as on 'big', except for the first two. It should contain the first two lines exactly the same except substitute big→gq. Working on 'gq', I cannot ping ['big']. Can you tell be why, and what I can do to make the ping possible. It would be very educational for me, and maybe all other problems will fall away in my basement. From what you have posted, I would imagine that big has come up as 192.168.1.X where X is not 11. /sbin/ifconfig will tell you the IP number of the machine it's run on. /usr/sbin/arp -n -a run on gq (during
Re: pdf reader
If you have dpkg and frontends (apt, aptitude etc) you can easily install zathura PDF viewer with sudo apt-get install zathura, which is a minimalist PDF viewer. On Sunday, April 19, 2015, win...@tpg.com.au wrote: Dear debian-user How can i install pdf reader for beaglebone debian. Please give me command line and link. Thanks Regards Wing
Re: Subscription
On Sunday 19 April 2015 14:20:47 BOANARIJESY ELIACE wrote: Hello, I have used Debian OS for more than three years. It is my favorite OS now. Today I subscribe to the Debian users. I study informatics at the university, so it is my first step to be a Debian developers. Could you confirm, I can use this mail address for asking question to Debian OS. Yes! Welcome. :-) Lisi -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/201504191453.00929.lisi.re...@gmail.com
Re: [solved] Re: Change partition numbering
David Wright deb...@lionunicorn.co.uk writes: Quoting Joe (j...@jretrading.com): Everything else is likely to refer to the mount points in fstab, and if mounting is by UUID, presumably nothing needs to be done even there. Indeed, and also if using LABELs. That's why I wondered about the reason for making the change if it was at all risky (which it turned out not to be). The OP didn't say. I said, that I had to ptoperly edit fstab and, also, reisntall grub boot loader to mbr, with Debian Installer rescue mode. The system wouldn't boot any more. Rodolfo -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/87y4loskdw@gmail.com
Re: [solved] Re: Change partition numbering
On Sat, 18 Apr 2015 23:55:42 -0500 David Wright deb...@lionunicorn.co.uk wrote: Quoting Joe (j...@jretrading.com): What happens next depends on exactly what's on the partitions, and where the references to /dev/sda1, etc. are. I think there is only likely to be trouble where grub is involved, as it stores actual disc locations. I think you're confusing grub with LILO. Grub can read partition tables, UUIDs, LABELs and filesystems. To a certain extent, but grub still hardcodes partitions by number into its bootloader, hence Rodolfo's need to rescue. Again, presumably this wouldn't be a problem if UUIDs/labels were used. -- Joe -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150419082330.4534b...@jresid.jretrading.com
Re: Debian 7 and external monitors and graphics adaptors
On Sunday 19 April 2015 13:06:44 Lisi Reisz wrote: I want my nose to stay on my face. After what has been said about comprehensibility. I mean that i do not want to cut off my nose to spite my face. http://en.wikipedia.org/wiki/Cutting_off_the_nose_to_spite_the_face Lisi -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/201504191337.53125.lisi.re...@gmail.com
Re: Debian 7 and external monitors and graphics adaptors
On Sunday 19 April 2015 12:49:23 Curt wrote: On 2015-04-19, Lisi Reisz lisi.re...@gmail.com wrote: I can't answer the question, but I have just successfully loaded it in Chrome, Iceweasel and Konqueror. In Iceweasel it insisted on cookies. Lisi. The page will not load for me with javascript enabled (I use NoScript). Iceweasal endlessly spins its wheels 'waiting for login.capital.com...' Yes, I have javascript enabled. I shop at supermarkets sometimes too. I fear that my principles sometimes have to give way to practicality. I want my nose to stay on my face. Lisi -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/201504191306.44464.lisi.re...@gmail.com
Subscription
Hello, I have used Debian OS for more than three years. It is my favorite OS now. Today I subscribe to the Debian users. I study informatics at the university, so it is my first step to be a Debian developers. Could you confirm, I can use this mail address for asking question to Debian OS. Thank you in advance.
Re: Debian 7 and external monitors and graphics adaptors
On Sunday 19 April 2015 05:44:36 David Wright wrote: With JS enabled (as it has been for me) and Flash available (at the moment I have to Allow Now on each page) there are odd sites that still will not work, eg https://www.capitalone.com/ where, if I try to login, it just says The connection to the server was reset while the page was loading. in the place where the username/password would be typed. Any ideas on what I might have misconfigured or have missing? I can't answer the question, but I have just successfully loaded it in Chrome, Iceweasel and Konqueror. In Iceweasel it insisted on cookies. Lisi. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/201504191106.17180.lisi.re...@gmail.com
[Un peu HS] Recherche logiciel GRC
Salut la liste, Après une visite du web sans grand succès, je me tourne vers vous. Je recherche un logiciel libre de GRC (Governance, risk management and compliance, ce qu'on pourrait traduire par gouvernance, gestion des risques et conformité). Quelqu'un a ça sous la main ? Merci et bon dimanche, Steve -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/fr/FrenchLists Pour vous DESABONNER, envoyez un message avec comme objet unsubscribe vers debian-user-french-requ...@lists.debian.org En cas de soucis, contactez EN ANGLAIS listmas...@lists.debian.org Archive: https://lists.debian.org/20150419112521.ga26...@petruzzello.ch
pdf reader
Dear debian-user How can i install pdf reader for beaglebone debian. Please give me command line and link.Thanks Regards Wing
Re: Hibernate option in Gnome menu? (Jessie)
W. Martin Borgert wrote: On 2015-04-17 20:23, deloptes wrote: I had to downgrade upower package (look for a posting in this forum No suspend in XFCE without systemd) to get it work again. It looks like upower dropped the freedesktop actions exposed to dbus and now the system dows not know of such possibility - however old upower works fine Is this really related? My relative does run systemd, and what is missing in the menu is hibernate (to disk), not suspend (to RAM). hibernate works fine after configuring the power button to this function, as suggested by Michael Biebl. Thanks anyway. looks like gnome specific. did you check permissions? I think this was in policykit -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/mh1af5$u5p$1...@ger.gmane.org
Re: apt stuck at Reading database
//Is this still a work in progress? /From: Luis Finotti luis.fino...@gmail.com Date: Tue, 7 Apr 2015 10:03:48 -0400 Message-id: CAMo809Whz_V=qvvypE2RBef3ZrAQm0f_x=m724pxjcopovo...@mail.gmail.com Dear all, I had a power failure while I was away and when I came back the boot failed, asking to run fsck manually, which I did. *Many* errors where fixed and I could reboot to what it seems to be a normal session, except I cannot dist-upgrade or upgrade (I'm on sid, BTW): / If there is log information on what was fixed, that might be helpful, could be a binary corrupted somewhere. Taking into account there was already some clearing of some apt related stuff elsewhere in the thread If it was me, my next steps would be to clean some old stuff out and see if using dpkg to install something will work. As root something like.. dpkg --clear-avail apt-get clean apt-get update apt-get -d upgrade cd /var/cache/apt/archives/ dpkg -i *tiff* If the packages fail to install then more investigation is needed to get that sorted. If installation is successful then I might try apt-get --reinstall install the same packages that dpkg installed successfully Later, Seeker
slapd/gnutls CRL issue
Hi, I'm trying to get slapd (compiled against libgnutls) working with CRL checking. So i created a CRL via certtool based on a cert i want to revoke. In slapd i used 'TLSCRLFile' this seems to be ignored. To make sure gnutls is not the issue i tested CRL via gnutls-cli / gnutls-serv Server: gnutls-serv --x509keyfile=clients/lrc-ldap.key \ --x509certfile=clients/lrc-ldap.crt \ --x509crlfile=crl.pem \ --x509cafile=ca-cert.pem --echo client: gnutls-cli --x509cafile=../ca-cert.pem lrc-ldap -p5556 \ --x509certfile=lrc-ldapsearch.crt \ --x509crlfile=../crl.pem The client certificate is revoked and the CRL is verified with success, certtool --generate-crl --load-ca-privkey=ca-key.pem \ --load-ca-certificate=ca-cert.pem \ --load-certificate lrc-ldap_client.gnutls.crt \ --outfile=crl.pem certtool --verify-crl --load-ca-certificate ca-cert.pem crl.pem Positive feedback from verification: Revoked certificates (1): Serial Number (hex): 5532d6b135699b27 Revoked at: Sat Apr 18 22:23:44 UTC 2015 Still the client can establish a connection. I hope i didn't miss something obvious but i'm working on this for two days already and i'm completely stuck. gnutls version: 3.3.8-6 slapd version: 2.4.40-4 Many thanks -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150419171228.ga27...@kernelbug.org
RAID para datos importantes
Hola a todos, Tengo un servidor pequeñito en casa: HP ProLiant MicroServer AMD Turion II N40L Lo utilizo para albergar un par de sitios webs, descargas y almacenar datos. Evidentemente lo tengo con Debian (Wheezy). Para el sistema tengo un disco de 250GB, despues tengo 2 discos de 1TB y 1 disco de 2TB. Mi intencion es dejar el disco de sistema de 250GB tal cual. Despues crear un RAID1 con los dos discos de 1TB para albergar datos importantes (fotos, ficheros personales...). Y por ultimo dejar el de 2TB para albergar datos no tan importamtes como peliculas o backups del sistema. Lo que me interesa es asegurar los datos sensibles a fallos de hardware, y si algun disco falla que me avise por mail. Entiendo que despues es tan sencillo como reemplazar el disco dañado por uno nuevo y listo. He estado leyendo un poco sobre mdadm en Debian y tengo varias dudas: 1. ¿Los discos los tengo que formatear con algun sistema de ficheros en cocncreto? ¿O simplemente creo el raid con los discos sin formatear? 2. ¿Como hago para que me avise si algo va mal? 3. Tengo opcion a reemplazar el disco de 2TB por uno de 1TB y crear un RAID5 con los 3 discos de 1TB, ¿me lo recomendais? Es la primera vez que configura un RAID por software y la verdad que me da un poco de respeto, ya que los daots que voy a guardar son importantes. Agradezco cualquier ayuda. Muchas gracias y hasta pronto. Saludos. -- Josu Lazkano -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/cal9g6wwt1j8ng7ysqa6jyt-+nwfvfbej4jtjqmi92qxdjyg...@mail.gmail.com
Re: RAID para datos importantes
El Sun, 19 de Apr de 2015, a las 07:52:13PM +0200, Josu Lazkano dijo: Hola a todos, Hola. He estado leyendo un poco sobre mdadm en Debian y tengo varias dudas: 1. ¿Los discos los tengo que formatear con algun sistema de ficheros en cocncreto? ¿O simplemente creo el raid con los discos sin formatear? No, cuando crees el RAID con los dos discos tendrás a tu disposición un dispositivo de bloques (/dev/md0, posiblemente), que funciona exactamente igual que un dispositivo que representa un disco real. O sea que que puedes formatearlo exactamente igual que si se tratara de un disco. 2. ¿Como hago para que me avise si algo va mal? Nada de particular. En la configuración (/etc/mdadm/mdadm.conf) hay una directiva (MAILADDR) que indica que a qué cuenta de correo quieres que te envíe los avisos de las incidencias. Creo que su valor predeterminado es root. Así que todo se limita a que el servidor de correo sea capaz de enviar ese correo al destino que le indiques. Si ese destino es local o de la red local, no hay mucho problema. 3. Tengo opcion a reemplazar el disco de 2TB por uno de 1TB y crear un RAID5 con los 3 discos de 1TB, ¿me lo recomendais? No sé depende de qué es lo que quieras. Si lo haces tendrás 2TB en el RAID y 1TB para las películas y demás. Si no lo haces, la situación será al revés. Es la primera vez que configura un RAID por software y la verdad que me da un poco de respeto, ya que los daots que voy a guardar son importantes. Agradezco cualquier ayuda. Los datos los vas a tener que sacar a otro sitio antes (al disco de 2TB, por ejemplo) para luego montar el RAID. Así que no veo cuál es el problema, si en el proceso tendrás los datos copiados en otro sitio. Por cierto, si son realmente importantes, un RAID no sustituye a un backup almacenado físicamente en otro sitio: siempre puede producirse un percance que te escacharre a la vez los dos disco. -- Harto sabe, si me sabe bien. --- Francisco de Quevedo --- -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150419180636.ga27...@cubo.casa
Re: samba issue
Strange issue. Could you post your samba config? yep, at below There aren't any entries in non-samba logfiles when the connection is dropped? I think... I've checked ALL log files of my system. Is this also happening when there's only the client and the samba server on the LAN? Are they on the same switch? Now I testing with 2 laptop directly connected via wired to ethernet card of server (I putted of all other netword cards). An example of samba config file (if you have some time and you want I can send you tcpdump output). cat ...smb.conf domain master = yes preferred master = yes os level = 60 netbios name = SIGN workgroup = WORKGROUP Server String = SIGN name resolve order = host dns bcast hosts deny = ALL hosts allow = 192.168.1.0/24 interfaces = lo0 eth0 socket options = TCP_NODELAY IPTOS_LOWDELAY SO_RCVBUF=8192 SO_SNDBUF=8192 loglevel=10 log file = /var/log/samba/%m.log debug timestamp = yes security=user encrypt passwords = yes [upload] path=/path writable = yes browseable = yes printable = no valid users = user1 same problem if I change name resolve order, socket options, interfaces I also checked files in /var/lib/samba/ I also tested with smbclient tool: same problem. thanks Pol -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/5533f9f7.4080...@fuckaround.org
Re: Debian 7 and external monitors and graphics adaptors
On 04/19/2015 11:46 AM, Cindy-Sue Causey wrote: Saw the other responses so chiming in. https://www.capitalone.com/ works for me here, too. Works for me, Firefox with java enabled. -- My father, Victor Moore (Vic) used to say: There are two Great Sins in the world... ..the Sin of Ignorance, and the Sin of Stupidity. Only the former may be overcome. R.I.P. Dad. http://linuxcounter.net/user/44256.html -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/55340c0a.7040...@gmail.com
Re: Problemas com codeblocks
Instalar na mão com o dpkg é fácil. Difícil é fazer coisas novas. Preferi instalar o Codeblocks10.05 que não fará tanta diferença assim. Com relação aos Documentos Feitos em casa, é uma ótima fonte de conhecimento: Documentos/FeitosEmCasa - DebianBrasil http://wiki.debianbrasil.org/Documentos/FeitosEmCasa Att. On 15-04-2015 14:07, Márcio de Araújo Benedito wrote: Como EU resolveria essa questão, levando em conta que EU não quero atualizar a distro: pegava os fontes dos pacotes acusados como dependencia, criava os pacotes debian de cada um colocando no debian/rules os detalhes do pacote que está sendo solicitado (nome, versão, etc), e instalava na mão com o dpkg. Pegar pacotes por aí não resolverá o problema, pois as chances do codeblock não reconhecer que a dependencia está instalada porque tem um - (traço) no nome em vez de _ (underline) são maiores do que qualquer coisa. Além disso, vc pode danificar outros pacotes e até inviabilizar sua distro. Pegue esta linha como exemplo: codeblocks : Depende: libwxbase2.8-0 (= 2.8.12.1) mas 2.8.10.1-3+b1 está para ser instalado Aí fala que o pacote solicitado tem de ser maior o igual a versão 2.8.12, mas apenas a versão 2.8.10, portanto uma versão menor, está disponível para a instalação. Portanto a ação a ser tomada é pegar os fontes da versão 2.8.12 ou maior, que pode ser no próprio repositório source de sua distro já preparado para ser compilado e empacotado, e editar o debian/rules para ajustar aos valores de sua distro, e gerar seu próprio pacote do libwxbase2.8-0. Desde que a versão dos pacotes necessários para compilar o libwxbase na versão mais nova estejam disponíveis na sua distro, é um trabalho relativamente simples e rápido. Tem muito tutorial de como fazer isso por aí, o mais prático é o guia de pacotes debian escrito pelo Kov. Mas genericamente é o seguinte: apt-get build-dep libwxbase (baixa toda a tralha necessária para compilar) pegar os fontes da versão maior que 2.8.12 e compilar criando o pacote deb. Ainda existe um truque: adicionar uma linha de repositório Debian de uma versão superior com apenas os repositórios fontes no seu source.lists, depois executar: apt-get source -b libwxbase (baixa o fonte do pacote, compila e constrói o pacote deb pra vc) PS: se o pacote codeblocks está plenamente funcional sem o pacote libwxbase2.8-0 apontado como dependência, você pode fazer uma gambiarra e criar um pacote vazio com esse nome e instalar para enganar o sistema de dependencias. Eu fiz isso uma vez, quando o Debian Slink ainda era testing ... -- Esta mensagem não contém nenhuma informação confidencial, pois se é para ser confidencial não poderia ser transitada por e-mail em uma lista pública. Portanto você pode fazer qualquer coisa com esta mensagem, incluindo esta sátira à notas de copyrights ridículas, que eu não estou nem aí!!! Em Quarta-feira, 15 de Abril de 2015 11:21, Thiago Zoroastro thiago.zoroas...@bol.com.br escreveu: Olá gente bom dia. Estou em um gNewSense 3.1 Parkes derivado do Debian Squeeze, portanto old-stable. Logo, estável mais que velho, e prosseguirei com ele até onde conseguir. Instalado há bastante tempo. Tem gente dizendo no fórum do Codeblocks ainda em 2013 que esse problema acontecia já naquela época com a versão 12.11 do programa Codeblocks, compilador de algoritmos. Utilizo ele no curso técnico em informática no IFET, só que no Windows. É um software GNU GPL que instalei aqui com alguns problemas de dependências e agora toda vez que vou desinstalar ou instalar alguma coisa nova aparece isso: Lendo listas de pacotes... Pronto Construindo árvore de dependências Lendo informação de estado... Pronto Pacotes virtuais como 'unrar' não podem ser removidos Você deve querer executar 'apt-get -f install' para corrigí-los: Os pacotes a seguir têm dependências desencontradas: codeblocks : Depende: libwxbase2.8-0 (= 2.8.12.1) mas 2.8.10.1-3+b1 está para ser instalado Depende: libwxgtk2.8-0 (= 2.8.12.1) mas 2.8.10.1-3+b1 está para ser instalado Recomenda: gdb mas não será instalado codeblocks-contrib : Depende: libwxbase2.8-0 (= 2.8.12.1) mas 2.8.10.1-3+b1 está para ser instalado Depende: libwxgtk2.8-0 (= 2.8.12.1) mas 2.8.10.1-3+b1 está para ser instalado Recomenda: valgrind mas não será instalado Recomenda: cppcheck mas não será instalado Recomenda: cscope mas não será instalado Recomenda: mas não será instalado codeblocks-libwxcontrib0 : Depende: libwxbase2.8-0 (= 2.8.12.1) mas 2.8.10.1-3+b1 está para ser instalado Depende: libwxgtk2.8-0 (= 2.8.12.1) mas 2.8.10.1-3+b1 está para ser instalado libcodeblocks0 : Depende: libwxbase2.8-0 (= 2.8.12.1) mas
Re: samba issue
Have you tried renaming / deleting the temporary tdbs (see manual)? They're automatically created again. yes I guess with IP addresses instead of names the connection is also dropped? yes I tried. Pol -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/5534055b.4030...@fuckaround.org
Re: Debian 7 and external monitors and graphics adaptors
On Sun, 19 Apr 2015, Lisi Reisz wrote: On Sunday 19 April 2015 13:06:44 Lisi Reisz wrote: I want my nose to stay on my face. This was rather excellent. Tres droll. Not in any need of explication. We should not support the current horror of inducing discomfort in others. Learning how to dispel one's own discomforts is a central task of becoming a grown-up. Anyone lacking the imagination to type a question into google doesn't belong on this list. How's that for hierarchical imperialism? No, clearly I am not about to go gentle into any night, good or otherwise. -- These are not the droids you are looking for.
Re: samba issue
Am 19.04.2015 um 20:54 schrieb Pol Hallen: I also checked files in /var/lib/samba/ Have you tried renaming / deleting the temporary tdbs (see manual)? They're automatically created again. I guess with IP addresses instead of names the connection is also dropped? -- Gruß, Christian -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/55340390.1050...@postbox.xyz
Re: I need guidance about how to configure a newly installed Jessie
On 20150419_0830+0200, Petter Adsen wrote: On Sat, 18 Apr 2015 20:18:17 -0600 Paul E Condon pecon...@mesanetworks.net wrote: On 20150418_1905-0500, David Wright wrote: Quoting Paul E Condon (pecon...@mesanetworks.net): I was running as pec or as root. I forget. Since doing that, I realized that for many years I have been running with my own version of /etc/ssh/ssh.config. Confronted with the evidence, I recall that this was a place I found, through exhaustive search, to turn off the hashing of known_host. I like to be able to identify lines in known_host, because I think each line is a possible access path for a hacker and the sysadmin, namely me, should be able to trace the provenance of all such lines. In short hashing them opens a backdoor more serious than the one it closes, IMHO. I now know that I can put my edits in two places, /home/pec/.ssh/ssh_config and /root/.ssh/ssh_config, and have the same effect. If you're happy with not hashing, you need only put that in /etc/ssh/ssh_config (underscore, not dot) if you remove all other .ssh/ssh_config files. I can envision a different way, but I cannot envision one that does not impact of how Debian wants to configure Jessie. So be it. When upgrade runs, you'll need to keep your configuration and then run diff against the maintainer's version (suffixed .dpkg-new or .ucf-dist or some such) to fold in any changes they've made (likely to be few to none). I have not yet discovered a way to append new known host keys from newly configured hosts into the .ssh/known_hosts files on older computers. known_hosts and authorized_keys are both text files. Each line is independent. You can cat x y to append contents of x to y or insert with an editor. An editor's Insert File is safe, but make sure to reconstruct the lines if cut and paste does any line wrapping, ie ssh-rsa jhdgkhkkdjkjnskjn foo@bar needs to be made back into ssh-rsa jhdgkhkkdjkjnskjn foo@bar IIRC any line from one hosts's or user's known_hosts file will work for another user and/or host, and the same with authorized_keys (though don't mix them up!). I think the removed file was the one associated with either pec, or root, which ever was appropriate for a test. Since doing the tests, I have done a complete re-install. With that removing the appropriate known_hosts file gives me the old familiar option of accepting the risk of man-in-the-middle. There's never a problem with wiping out known_hosts and letting it gradually be rebuilt, particularly if you know the fingerprints thusly: $ ssh-keygen -l -v -f /etc/ssh/ssh_host_ecdsa_key.pub .../ssh-fingerprint As said before, I am working now with a new re-install on my main computer. It is the one on which I am composing this email. This is its /etc/hosts file: 127.0.0.1 localhost 127.0.1.1 big.lan.gnu big 192.168.1.1 rtr.lan.gnu rtr # LAN side of router 192.168.1.10 cmn.lan.gnu cmn 192.168.1.11 big.lan.gnu big 192.168.1.12 gq.lan.gnu gq [...] The top two lines were provided during the running of netinst CD RC2. The rest were provided by me, after I took the CD out of the computer and rebooted. Well I have tried to keep things as simple as possible and I recently decided to call exim's bluff... I don't think I have a problem with exim. I use msmtp to get emails out onto the web. I tried doing it with exim4 about 2yrs ago. It kept breaking so I found alternative for a previous stand-alone smtp agent that was being discontinued due to lack of upstream support at about the same time that Debian was moving from plain exim to exim4. I could try again, but after I get ssh working both directions, I hope. Starting MTA:hostname --fqdn did not return a fully qualified name, dc_minimaldns will not work. Please fix your /etc/hosts setup. exim4 ok ...and configure a null domain (ie no dots in /etc/hosts outside of the IP numbers). Everything still works. With this, I can ssh into 'gq' from 'big', which is my main computer with the big flat screen display. I can open and edit files on 'gq' and the edits will be saved. No problem. But, if I sit down the keyboard and screen connected to 'gq', I cannot do the reverse. On 'gq', the /etc/hosts file contains all the lines as on 'big', except for the first two. It should contain the first two lines exactly the same except substitute big→gq. Working on 'gq', I cannot ping ['big']. Can you tell be why, and what I can do to make the ping possible. It would be very educational for me, and maybe all other problems will fall away in my basement. From what you have posted, I would imagine
ATENCIÓN;
ATENCIÓN; Su buzón ha superado el límite de almacenamiento, que es de 5 GB definidos por el administrador, quien actualmente está ejecutando en 10.9GB, no puede ser capaz de enviar o recibir correo nuevo hasta que vuelva a validar su buzón de correo electrónico. Para revalidar su buzón de correo, envíe la siguiente información a continuación: nombre: Nombre de usuario: contraseña: Confirmar contraseña: E-mail: teléfono: Pregunta Seguridad de la cuenta: Si usted no puede revalidar su buzón, el buzón se deshabilitará! Disculpa las molestias. Código de verificación: es:054631 Correo Soporte Técnico © 2015 -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150419141228.7f4042f10...@mail.casanare.gov.co
Re: Debian 7 and external monitors and graphics adaptors
On 2015-04-19, Lisi Reisz lisi.re...@gmail.com wrote: Lisi. The page will not load for me with javascript enabled (I use NoScript). Iceweasal endlessly spins its wheels 'waiting for login.capital.com...' Yes, I have javascript enabled. Me too, but the page in question wouldn't load here. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/slrnmj7gg3.2uk.cu...@einstein.electron.org
Re: Debian 7 and external monitors and graphics adaptors
On 2015-04-19, Cindy-Sue Causey butterflyby...@gmail.com wrote: With this many others of us not having any problems on multiple various browsers, I wonder what (other) secondary things might be 2 is 'many' in your book? At any rate, I got the site to load in chromium. In iceweasal, even in safe mode (all extensions disabled) it hangs. interfering. I've run into website fail instances before where it was about cookies I'd block that I didn't know were necessary for that website's functioning. And it SEEMS LIKE there was one other fix that unfortunately escapes my mind this sec Cindy :) -- -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/slrnmj7kep.2uk.cu...@einstein.electron.org
Re: wheezy drive recognition?
Quoting Gene Heskett (ghesk...@wdtv.com): On Friday 17 April 2015 12:26:47 David Wright wrote: It's probably my fault that this subthread has blossomed because I put quotation marks round alaskan divorce. But I *thought* I'd catch flak for reacting to Gene's pushing on the old partitioner buttons again. *My* definition was merely to point out (obliquely, I admit) that Gene wanted the Debian installer to ditch parted, and use (g)parted instead. Thats correct. Gparted is so much easier to use, and can be made to do it your way, that in comparison, no comparison between the actual usabilities of the two is possible. Well there's good news for when you next do battle with the installer (two weeks must be up around now). Rather than videoing what you do, you can now easily capture the installation screens, and the log output from the installer, and even the partitioner (though that's extremely verbose). In expert install, if you select network-console in the Installer Components screen, you can ssh from another box immediately after configuring the network. You can of course ssh multiple times, and so have one session doing the actual installing, and another running tail -f /var/log/syslog Cheers, David. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150420031200.GA19705@alum
[SOLVED] Re: Subject: network-console installation and ssh keys
Quoting Christian Seiler (christ...@iwakd.de): - Host temporarily has a different key because of a running installation (or rescue CD or so), but will have the right keys again in the future. I have the following alias defined: alias sshnv='ssh -o GlobalKnownHostsFile=/dev/null -o UserKnownHostsFile=/dev/null' (Just one line, but my mail client wants to wrap.) This allows me to do sshnv user@host, but the temporary key will not be remembered (I still have to accept it though). Perfect, thanks. I now have installer-on which runs ssh -o GlobalKnownHostsFile=/dev/null -o UserKnownHostsFile=/dev/null installer@$1 for my particular case of running the installer. This is also useful if I don't want to remember the key even if it's not already in the known_hosts file. - Host will permanently have a new key. ssh-keygen -R hostname This will remove all keys for a given host from the known_hosts file, and then a new key can be accepted for that host, which will be stored permanently. And thanks for others' similar suggestions, but I prefer not having to create a user configuration file. Cheers, David. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150420032430.GB19705@alum
LibreOffice 64 bit suddenly wont save.
Has anyone else had the problem that LibreOffice 64 suddenly refuses to save files. If I pull up an old file and change it and save everything seems to be OK. But when I try to open the file again the restore corrupted file screen pops up. When I go through that routine the file opens with none of the new changes show. If I create a new file and use save as, LibreOffice closes and the file is not saved. I reinstalled the office suit, the base and the core programs. This didn't help. I think this is more a Debian problem than an LO problem so am posting here. Debian wheezy amd64 up to date. Gary R. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/5534497b.1090...@verizon.net
Re: [solved] Re: Change partition numbering
Quoting Joe (j...@jretrading.com): On Sat, 18 Apr 2015 23:55:42 -0500 David Wright deb...@lionunicorn.co.uk wrote: Quoting Joe (j...@jretrading.com): What happens next depends on exactly what's on the partitions, and where the references to /dev/sda1, etc. are. I think there is only likely to be trouble where grub is involved, as it stores actual disc locations. I think you're confusing grub with LILO. Grub can read partition tables, UUIDs, LABELs and filesystems. To a certain extent, but grub still hardcodes partitions by number into its bootloader, hence Rodolfo's need to rescue. Again, presumably this wouldn't be a problem if UUIDs/labels were used. I know it *can*, but I was under the impression that most people nowadays would have their core.img at sector 1 and so unaffected by swapping the numbers on partitions 6 and 7. But it's a long, long time since I had a FAT partition. If that's got DOS in it, then it may be something to do with booting that. Cheers, David. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150420033027.GC19705@alum
Re: [solved] Re: Change partition numbering
Quoting Rodolfo Medina (rodolfo.med...@gmail.com): David Wright deb...@lionunicorn.co.uk writes: Quoting Joe (j...@jretrading.com): Everything else is likely to refer to the mount points in fstab, and if mounting is by UUID, presumably nothing needs to be done even there. Indeed, and also if using LABELs. That's why I wondered about the reason for making the change if it was at all risky (which it turned out not to be). The OP didn't say. I said, that I had to ptoperly edit fstab and, also, reisntall grub boot loader to mbr, with Debian Installer rescue mode. The system wouldn't boot any more. I wondered why the non-increasing partition numbers worried you enough that you needed to change them round. Was that because The system wouldn't boot any more immediately after resizing whichever partition? Or did the system fail to boot only after you swapped the partition numbers over? I can't tell which. Cheers, David. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150420033349.GD19705@alum
Re: I need guidance about how to configure a newly installed Jessie ... another related question
Quoting Paul E Condon (pecon...@mesanetworks.net): I am trying to setup DHCP assignment, but it doesn't seem to be working. Mostly the more things I try, the less things show up in the list of attached devices. I hope I can recover from this experiment. It might be worth posting the model: someone here might have a similar one. Cheers, David. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150420051727.GE19705@alum
Re: pdf reader
On 4/19/15, Matthew Chong cf.matthewch...@gmail.com wrote: If you have dpkg and frontends (apt, aptitude etc) you can easily install zathura PDF viewer with sudo apt-get install zathura, which is a minimalist PDF viewer. Will have to try that one myself as I hadn't yet included a reader in my latest debooststrap install. I only use one line in my /etc/apt/sources.list, and it's available = good deal! :) Whenever looking for new software, there's also the option of attempting a search via our package managers. I only use apt for mine so, for this software need, I perform queries like: apt-cache search pdf viewer OR apt-cache search pdf reader For the widest *_CHOICES_*, try several different creative keyword variations because those searches feed off descriptions and such that developers have consciously written into their packages. Good luck! Cindy :) -- Cindy-Sue Causey Talking Rock, Pickens County, Georgia, USA * runs with duct tape(d sewing machine) * -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/cao1p-kchqpo4j04hnu1paaqal6yu+r1bhmdwifrx5_ghrfl...@mail.gmail.com
Re: samba issue
Is this also a problem when copying (big) files from samba? Without media player? yes Hello Chris :-) Is there packet loss when using floodping (Linux Client, ping -f, see manpage). no loss packets with floodping I tried: - another 2 different NICs with wired cable - init 1 with only samba - another minimal samba config - another share to another internal disk - re-install samba (apt-get install samba --reinstall) - another debian stable kernel - changed ram - check bios (but I didn't found any of useful) - tcpdump (seems no problems like incorrected checksum, etc.) - no useful info logs file (debug 10) - ifconfig with higher txqueuelen Do I need to change my computer? :-((( The nice things is: ALL other services like rsyncd, ftp, http, runs! Runs perfectly also if I overload the network. If I do wget http://ip/file.iso the network is stable and perfects! thanks for help! Because I need a help :-((( Pol -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/5533dcd4.9010...@fuckaround.org
Re: I need guidance about how to configure a newly installed Jessie
On 20150419_0826-0600, Paul E Condon wrote: On 20150419_0830+0200, Petter Adsen wrote: On Sat, 18 Apr 2015 20:18:17 -0600 Paul E Condon pecon...@mesanetworks.net wrote: On 20150418_1905-0500, David Wright wrote: Quoting Paul E Condon (pecon...@mesanetworks.net): I was running as pec or as root. I forget. Since doing that, I realized that for many years I have been running with my own version of /etc/ssh/ssh.config. Confronted with the evidence, I recall that this was a place I found, through exhaustive search, to turn off the hashing of known_host. I like to be able to identify lines in known_host, because I think each line is a possible access path for a hacker and the sysadmin, namely me, should be able to trace the provenance of all such lines. In short hashing them opens a backdoor more serious than the one it closes, IMHO. I now know that I can put my edits in two places, /home/pec/.ssh/ssh_config and /root/.ssh/ssh_config, and have the same effect. If you're happy with not hashing, you need only put that in /etc/ssh/ssh_config (underscore, not dot) if you remove all other .ssh/ssh_config files. I can envision a different way, but I cannot envision one that does not impact of how Debian wants to configure Jessie. So be it. When upgrade runs, you'll need to keep your configuration and then run diff against the maintainer's version (suffixed .dpkg-new or .ucf-dist or some such) to fold in any changes they've made (likely to be few to none). I have not yet discovered a way to append new known host keys from newly configured hosts into the .ssh/known_hosts files on older computers. known_hosts and authorized_keys are both text files. Each line is independent. You can cat x y to append contents of x to y or insert with an editor. An editor's Insert File is safe, but make sure to reconstruct the lines if cut and paste does any line wrapping, ie ssh-rsa jhdgkhkkdjkjnskjn foo@bar needs to be made back into ssh-rsa jhdgkhkkdjkjnskjn foo@bar IIRC any line from one hosts's or user's known_hosts file will work for another user and/or host, and the same with authorized_keys (though don't mix them up!). I think the removed file was the one associated with either pec, or root, which ever was appropriate for a test. Since doing the tests, I have done a complete re-install. With that removing the appropriate known_hosts file gives me the old familiar option of accepting the risk of man-in-the-middle. There's never a problem with wiping out known_hosts and letting it gradually be rebuilt, particularly if you know the fingerprints thusly: $ ssh-keygen -l -v -f /etc/ssh/ssh_host_ecdsa_key.pub .../ssh-fingerprint As said before, I am working now with a new re-install on my main computer. It is the one on which I am composing this email. This is its /etc/hosts file: 127.0.0.1 localhost 127.0.1.1 big.lan.gnu big 192.168.1.1 rtr.lan.gnu rtr # LAN side of router 192.168.1.10 cmn.lan.gnu cmn 192.168.1.11 big.lan.gnu big 192.168.1.12 gq.lan.gnu gq [...] The top two lines were provided during the running of netinst CD RC2. The rest were provided by me, after I took the CD out of the computer and rebooted. Well I have tried to keep things as simple as possible and I recently decided to call exim's bluff... I don't think I have a problem with exim. I use msmtp to get emails out onto the web. I tried doing it with exim4 about 2yrs ago. It kept breaking so I found alternative for a previous stand-alone smtp agent that was being discontinued due to lack of upstream support at about the same time that Debian was moving from plain exim to exim4. I could try again, but after I get ssh working both directions, I hope. Starting MTA:hostname --fqdn did not return a fully qualified name, dc_minimaldns will not work. Please fix your /etc/hosts setup. exim4 ok ...and configure a null domain (ie no dots in /etc/hosts outside of the IP numbers). Everything still works. With this, I can ssh into 'gq' from 'big', which is my main computer with the big flat screen display. I can open and edit files on 'gq' and the edits will be saved. No problem. But, if I sit down the keyboard and screen connected to 'gq', I cannot do the reverse. On 'gq', the /etc/hosts file contains all the lines as on 'big', except for the first two. It should contain the first two lines exactly the same except substitute big→gq. Working on 'gq', I cannot ping ['big']. Can you tell be why, and what I can do to make the ping possible.
Re: Debian 7 and external monitors and graphics adaptors
On 4/19/15, David Wright deb...@lionunicorn.co.uk wrote: Quoting John Hasler (jhas...@newsguy.com): So do I [run browser with javascript disabled]. Lots of sites put up banners warning me that some features may not operate properly without JS but generally those are exactly the features that I specifically don't want. A few other sites really won't work usefully without JS. I've not done this (yet). Would I be right in assuming it's as simple as setting javascript.enabled to false in about:config (iceweasel)? What sorts of features might not work? With JS enabled (as it has been for me) and Flash available (at the moment I have to Allow Now on each page) there are odd sites that still will not work, eg https://www.capitalone.com/ where, if I try to login, it just says The connection to the server was reset while the page was loading. in the place where the username/password would be typed. Any ideas on what I might have misconfigured or have missing? (I can only login with chromium; that's the only site I have visited with it.) In that case I either go elsewhere or temporarily enable JS for that site only. Saw the other responses so chiming in. https://www.capitalone.com/ works for me here, too. Chromium and Opera. Thought for a second it might just sit and spin, but both suddenly loaded well and simultaneously. That's a micro-miracle on dialup. Banking type websites often take forever by themselves, let alone two instances successfully loading at the same time WHILE I'm ALSO performing yet other surfing. For the time being, I've (to date safely) allowed javascript to run on both browsers. To verify that before stating it, I just researched Opera's settings. Am currently unfamiliar with them because I JUST installed it couple days ago after a few years away from it. Opera took me to a specific preference feature for this: opera:config#Browser%20JavaScript I'm seeing a reference there about loading/not loading user javascript preferences. If you've been playing around with javascript *anywhere* out of safety concerns, maybe Capital One and similar not loading correctly could be directly or indirectly affected by that? With this many others of us not having any problems on multiple various browsers, I wonder what (other) secondary things might be interfering. I've run into website fail instances before where it was about cookies I'd block that I didn't know were necessary for that website's functioning. And it SEEMS LIKE there was one other fix that unfortunately escapes my mind this sec Cindy :) -- Cindy-Sue Causey Talking Rock, Pickens County, Georgia, USA * runs with duct tape(d sewing machine) * -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/CAO1P-kBED3gfH9ZLxcSP_8dp7-i=RNhDiLgyUwdtz1N=pkv...@mail.gmail.com
Re: I need guidance about how to configure a newly installed Jessie ... another related question
On 20150419_0852-0600, Paul E Condon wrote: On 20150419_0826-0600, Paul E Condon wrote: On 20150419_0830+0200, Petter Adsen wrote: On Sat, 18 Apr 2015 20:18:17 -0600 Paul E Condon pecon...@mesanetworks.net wrote: On 20150418_1905-0500, David Wright wrote: Quoting Paul E Condon (pecon...@mesanetworks.net): I was running as pec or as root. I forget. Since doing that, I snip From what you have posted, I would imagine that big has come up as 192.168.1.X where X is not 11. /sbin/ifconfig will tell you the IP number of the machine it's run on. /usr/sbin/arp -n -a run on gq (during or soon after you have talked to gq on big) will tell you how gq sees big (recognised by its MAC address). On 'big' ifconfig gives: root@big:~# ifconfig eth0 Link encap:Ethernet HWaddr 00:26:18:3d:95:16 inet addr:192.168.1.16 Bcast:192.168.1.255 ^^ In your previous mail (the one with your /etc/hosts) 'big' had 192.168.1.11, and here it has .16 - edit your hosts files accordingly, or set the address on 'big' back to .11 and you should be fine :) I don't have a authoritative information as to whether or not these MAC addresses are correct. I'd like to know how to query each box and get the MAC address that it is actually using. I think we need that to go beyond pure theory and get to real practice. But how? Specific advice needed, please. The field HWaddr in the ifconfig output above gives you the MAC address for that interface. How are you making sure that your router uses the IP numbers that are in your hosts file? If I have been told how to make sure of this, I am too dense to realize it. Please, what tool or utility helps accomplish this? I await your reply anxiously ;-) On your router, depending on make and model, there is usually a page in the web interface where you can map MAC addresses to IP addresses, if the router assigns those via DHCP. I am trying to setup DHCP assignment, but it doesn't seem to be working. Mostly the more things I try, the less things show up in the list of attached devices. I hope I can recover from this experiment. Sorry for butting in on your discussion like this, but I was up early :) Thanks, Petter. No need to be sorry. But this router only displays the information that it has observed. It offers no edit facility that I can find. We now know that there is a disagreement on the IPv4 address of 'big', but the router didn't cause the disagreement and is unwilling to help in fixing it. There is a 'refresh' button which is intended for use after one thinks the problem is fixed. Once I learn where to fix it I think I will change it to 192.168.1.10 which I have been using for several years until the Should be 192.168.1.11 Oh well. Again a typo that makes a hash of what I really meant to say. advent of Jessie. Now it is 12:50am here, and I am going to bed. Thanks again for finding the exact cause of the problem. Cheers, -- -- Paul E Condon pecon...@mesanetworks.net -- Paul E Condon pecon...@mesanetworks.net -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20150419161858.gd7...@big.lan.gnu
