Re: 3c509 is being annoying
> I have disabled pnp and the card insmods well. I can also give it an > address with ifconfig and ping to the card, but I am unable to ping > another host (and vice versa). As far as I know I have no firewall running I have had problems with this model of ethernet ... I can't remember now .. it's too late, but I think thar it's a problem with the irq that you asing to the ethernet and the irq the kenell waits for. but now I can't tell you the way to solve it
Re: samba - "guest ok" doesn't work
[EMAIL PROTECTED] wrote: > > I want Windows users on my network to be able to print to my printer > without a password. I have "guest ok = yes" in the printers share. I also > have "security = user" in the global section. Shouldn't this allow > printing without a password? Currently it does not. Printing does work > fine with a correct username and password from the Windows machines > though. But, it always prompts for a password, and if the password is > incorrect or blank, it fails. Does "guest ok" only work when "security = > share"? Any ideas what might be wrong? > > In my smb.conf file I have (this is not complete though): > > [global] >printing = bsd >printcap name = /etc/printcap >load printers = yes >guest account = nobody >invalid users = root >security = user >encrypt passwords = yes > > [printers] >comment = All Printers >browseable = yes >path = /tmp >printable = yes > ; public = yes >guest ok = yes >writable = no >create mode = 0700 > > Thanks, All this is OK, but if your windows machines ask for a password and you press cancel, then you don't have network, so you must disable login in your windows machines. But I not sure, if it's not the problen tell me and tomorrow I will send you my samba config file for that, the problem it that the file is at office. Angel > > Gerry > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Permissions
Bill Lumsden wrote: > > Hi all, > I want to give members of my staff access to a program (radute)that > only > runs as root. Can this be done without giving full root access ?? > > If so can someone tell me how? > > computer:/usr/local/radius#ls -la > -r-x--1 root staff9105 Mar 2 2000 hsysadm > -r-x---r-x1 root staff8854 Mar 2 2000 hwebadm > -r-x--1 root staff4819 Mar 2 2000 ison > -rw-r--r--1 root staff 54 Mar 2 2000 pine > -rwx--1 root staff 292 Mar 2 2000 rad.sh > -rwxr-xr-x1 root staff 62096 Mar 2 2000 radute <- > -r-x---r-x1 root staff 11596 Mar 2 2000 timeweb > > If it's a binary program you only have to set the "S" bit on the permision of the file. If not, May be it works or not depends on the version of linux you ar runing.
Re: Bar code scanners
Matthew Sackman wrote: > > Dear all! > > I have been asked to start looking into providing an EPOS system for the shop > that I work at. I am hoping to be able to develop all the software myself > (using Perl and the GTK+ bindings). However, I have no idea about how well or > otherwise bar code scanners work under Linux. > > Does anyone have any information as to which scanners are particularly > good/bad > and how they should be connected etc etc, and the same for cash-drawer > triggers? > > Any info is very gratefully received. I have use some of then that only works as a "keyboard", gets the number as if you have typed it, of course they connect to the keyboard plug, so you don't need any driver I jope t helps you Angel > > Matthew > > -- > > Using intelligent power: > RISC OS, Be OS, Debian Linux > > Enjoying computing. > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
PostScript Printing Problem
Hello!! I have a HP DeskJet printer, and of course I habe the magicfilter instaled, so it works perfectly whit Debian. The problen is that I want to share it with some windows PC, I have the Samba instaled. If I export the printer and use the HP driver on the Windos PCs and print transparently, it works. But I want to use the printer as a postscript one, I mean using a postscript driver on windows (Apple or similar) but then the printer works but prints an extra page with PS rubber Any idea about where to look for an example?? Thanks to all Angel
Hylafax Server
Hello I am using the offical stable release of Debian. And when I have install the hylafax server. The UID that is the default int he hfaxd.conf if 21, but it doesn't exist. which goups must be in, permisions, ... name?? Thank all you for your help Angel
Re: audio filesystem
[EMAIL PROTECTED] wrote: > > I am having trouble mounting audio filesystem in my CD-RW. > probably specifying the file system might solve the problem. > iso9660 filesystem is not accepted. Of course the audio CDs ar not iso9660, they are raw disks, you only have tracks, normaly one for each song. if you want to listen use a program to do it, as xmcd for example. If you want to copy a song as .wav use cdparanoia or similar program ... What did you want to do with the audio cd?? I hope it helps you Angel > Do you know if audio cd's has a special filesystem name > that might work? thanks
Re: those problems where the easiest thing to do seems to be to reboot...
> > (I don´t have the thread, and no access to the archives right now, so > forgive me if I repeat something. Just trying to be helpful...) > > >> 1) you 'cat' a file you shouldn't in the console mode. before you know > >> it everything on the commandline becomes an unreadable mess of ascii > >> characters you didn't know you had. > I think that the command you must use to solve it is "setterm -reset", I have just test now and it works.
Re: problem playing audio CD's
Philipp Bliedung wrote: > > Hi, > > I'm new to the multimedia things under Linux :) > I have the problem that I can't play audio CD's on my computer. > I've installed everyhting that's related to sound properly - so I'm able > to play mp3s, *.wav,etc. with freeamp for example, but when I put in a > CD (even CD's I bought, no CD-R or CD-RW) and I want to mount it I get: > > mount: wrong fs type, bad option, bad superblock on /dev/cdrom or too > many mounted file systems > > Even as root I can't do it! This is how /etc/fstab looks like: > > /dev/cdrom /cdrom iso9660 > defaults,user,noauto,ro 00 > > When I start 'gcd 2.91' under Gnome I get this: > > "Unable to open cd device. Please make sure that you are using teh > correct device and that you have permission to access the device.." > The cd-drive works perfectely fine with every CD (cd-rom). So it's not > the cd-drive that's not working! Linux, can't mount a sound cd, you don't need to mout to use it, linux use the cd as a raw media. If you want to read a track on a wav use cdparanoia > > What am I missing, or what am I doing wrong? Any ideas for a good > cd-player? For example xmcd. > > TIA!! > Philipp > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
[Offtopic] LaTeX
Somebody can tell me where to find a good and complete electronic book (pdf, ps, dvi, ...) of LaTeX ?? Thank for all, and sorry for te offtopic Angel
Re: 2 ttyS0 questions...
Xucaen wrote: > > Hi all... > I have 2 questions regarding ttyS0. > First: I want my user name to have access to > ttyS0. where can I find info on how to do this > (i.e. which HOWTO if any) Add yourself to the diagout group, as you can see //dev/ttyS* belongs to this group. > > Second: I load minicom and sometimes the ALT keys > don't work (I haven't figured out why yet). when > they don't work, the only way I can exit is to > close xterm (or eterm, whichever I am using at > the time) but when I do this, ttyS0 remains > locked and I don't know how to unlock it. How do > I unlock ttyS0? First you must check that minicom has died, take a look whit "ps x", if not kill it. Then if the /dev/ttyS0 keeps locked you can delete "/var/lockLCK..ttyS0" > > thanks!! > > xucaen I hope it helps you Angel
Re: fstab entry for cd-rw device?
Unix domain sockets 1.0 for Linux NET4.0. > Adding Swap: 96352k swap-space (priority -1) > 3c59x.c:v0.99H 12Jun00 Donald Becker and others > http://www.scyld.com/network/vortex.html > eth0: 3Com 3c900 Cyclone 10Mbps TPO at 0xd400, 00:50:da:7a:f7:c5, IRQ 10 > 8K byte-wide RAM 5:3 Rx:Tx split, 10baseT interface. > Media override to transceiver type 0 (10baseT). > Enabling bus-master transmits and whole-frame receives. > ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker > http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html > ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0xd000, IRQ 9. > eth1: RealTek RTL-8029 found at 0xd000, IRQ 9, 00:60:67:3A:EE:7C. > es1371: version v0.22 time 09:53:39 Jun 25 2000 > es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x02 > es1371: found es1371 rev 2 at io 0xcc00 irq 5 > es1371: features: joystick 0x0 > es1371: codec vendor v (0x838476) revision 9 (0x09) > es1371: codec features 18bit DAC 18bit ADC > es1371: stereo enhancement: SigmaTel SS3D > Non-volatile memory driver v1.0 > scsi0 : SCSI host adapter emulation for IDE ATAPI devices > scsi : 1 host. > Serial driver version 4.27 with no serial options enabled > ttyS01 at 0x02f8 (irq = 3) is a 16550A > ttyS02 at 0x03e8 (irq = 4) is a 16550A > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] If you want to use a IDE cd-w or CD-wr you need to "detect" it as SCSI, and if you detect it as IDE id dosen't work properly. To do this you need to add something like append="hdb=ide-scsi" to your lilo config file. Or as I have do, recompile your kernel whithout IDE-CD suport, and with IDE-SCSI emulation. Angel
TIFF format???
I am using hylafaz server with some Windows clients. I have whfc as client program. And I have test some picture viewer programs as iview .. but all tell me that don't understand thi file format. Of course Xv, imagemagic, etc works.. but amy sugestion for windows? Than you for all Angel
Re: How do I get Linux?
Lee Baldwin wrote: > >Part 1.1Type: Plain Text (text/plain) >Encoding: quoted-printable ftp://ftp.debian.org/ or any mirror
DNS question
Hello!! I need to make up a dominium, but with only a server. I will like to use some DNS server not on my site, ¿can somebody help me? Of course I have static IP. And if I have to put DNS server on my machine, what can I use to make it? Thank you for all!!! Angel
G5 Xserver or Sun Blade 1500
I am a newbee in the workstation /server world. I am going to buy hardware to do biological modelling involving data input/output, R programming (an statistical language) and a few graphics visualization (some GIS). I would prefer to run debian on whatever I buy. I have some :)) money for this project (ca.4500 euros) and I am unable to decide myself what would be the best solution: an apple Xserver dual G5 2GHz or an Sun Blade 1500 Worksation. Both are the same price but. Here are the specs of each: Sun Blade 1500 Workstation 1 1-GHz UltraSPARC IIIi Processor 1-MB On-Chip L2 Cache Sun XVR-600 Graphics Accelerator 1-GB Memory 1 80-GB 7200 RPM IDE Disk Drive 1 10/100/1000 BaseT Ethernet Port 7 USB Ports 2 IEEE 1394 Ports 2 Serial Ports 1 Parallel Port 5 PCI Slots 16x DVD-ROM Drive Smart Card Reader Solaris 8 HW 5/03 Operating System Pre-Installed Xserver G5 Dual 2GHz PowerPC G5 1GB DDR400 ECC SDRAM - 2x512 80GB ADM (1x80GB Serial ATA) CD-ROM Mac OS X Server, Unlimited License Which are the cons and pros of each setup? As far as I understand the Xserver would be more easy to upgrade and better for databases and the blade system more powerful, particularly for the graphics (which are not the main difficulty of my project). Is this correct or does the higher Hz of the Dual G5 mean it is much faster than the UlraSparc Thanks, Angel -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: about xfce and window managers
On Tue, Nov 27, 2012 at 04:09:07PM +, Anthony Campbell wrote: > On 26 Nov 2012, John L. Cunningham wrote: > > On Sun, Nov 25, 2012 at 07:16:09PM +0200, Klearchos-Angelos Gkountras wrote: > > > I am currently using debian sid with xfce 4.8 . > > > I want to make tiling the windows like awesome or kinda like that . > > > > > > > Have you thought about using Xmonad as the wm? > > > > http://www.haskell.org/haskellwiki/Xmonad/Using_xmonad_in_XFCE > > > > I haven't used it in xfce, but I did use it as the wm for Gnome2 and I > > was very pleased. > > > > John I use xmonad 0.10 with xfce 4.8 (guided by the link mentioned above) and it works by default very well. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20121127165350.gb18...@gmail.com
Re: The order of my SATA and PATA are switching all the time
fdisk also gives some disk id. You can also use boot script like this to static numerize your drives: rm /dev/myhdd-0 /dev/myhdd-1 m=`cat /sys/block/sda/device/model` if test "$m" = "HDD0MODEL"; then ln -s sda /dev/myhdd-0 ln -s sdb /dev/myhdd-1 else ln -s sdb /dev/myhdd-0 ln -s sda /dev/myhdd-1 fi Then enter /dev/myhdd-0 /dev/myhdd-1 in your fstab. -- Get literate, get enlighted - read Orwell's very exciting, interesting, beautiful novel "1984" and Fromm's anti-fascist book "Escape from Freedom".
Re: vga=ask doesn't work anymore
> > >> Another note, GRUB2 is more similar to Lilo than you think. > > > > They're both boot loaders. Of course they're similar. But they have > > some serious differences. Serious enough that many folks, such as > > myself, choose to stick with LILO. > > Good luck in patching LILO to work without a BIOS. > There is ELILO in Debian. It is not in the installer, but I suppose they can switch to elilo or port it's UEFI code to lilo. -- Unfortunately, looks like Orwell was not to pessimistic after all. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/519b5ef2.9050...@mail.ru
Problem with xdvi!!!
Hello! I am using debian 2.2 and sometimes I use programs as Lyx, xemax, ... and all works fine, but when I use the xdvi to see some file, it doesn't work. The erros code is the same if I try it from the X-window server in Win98 or from the Linux X-Window. Error code: > xdvi a.dvi X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 55 (X_CreateGC) Serial number of failed request: 31 Current serial number in output stream: 298 Can anybody help me Thank for all Angel
Scanner support??
Hello, I have a Tawain scanner, it's a pararel port scanner, Tawain, 9600P. Which program, driver,.. I need to use it. It's this scanner suported by SANE? Thank you for all. Angel
hylafax problem
Hello!! I am using the Hylafax server on my linux, the 4.0.2-14 version, and I try to use it fron a windows machine with w2hfax 0.1.8, and when i try to add a new fax i get this error code: Runtime Error: '-2147467259 (80004005) Unexpected Python Error: Exceptions. ValueError:invalid literal for atoi():Lease login with USER and PASS What it it? A problen in my linux server? must I use other windows client?? Thank for all Angel
Printing Problem
Hello!! I am usind debian as a printing server. I have an deskject printer, and when I try tu use it from a windows machine, if I want to get a page print as if i have a postscript printer (using Sanba at Linux and a PS driver on windows) I get the page perfectly and an extre rubber page. ¿any idea? .. I want so save paper Angel
Hylafax Help
I am trying to install a fax server with Debian using hylafax. Can anybody tell me where to find howto and which windows cliente can I use? Angel
help me!?
i'm a french user of linux and i found your address in a forum i've got a problem with netatalk. during system start up (netatalk), I get a message that says 'atalkdsocket: Invalid argument'. The only thing that I have changed from the default that deselect sets up is that I added 'eth0' to /etc/atalkd.conf. i try everything with atalkd.conf but nothing change (i've got two ethernet cards: eth0 for internet and eth1 for intranet) What do I need to add, change, ...? thank you didier _ Le journal des abonnés Caramail - http://www.carazine.com
help me mysql??
hello i'm the frenchie who wrote you for a problem whith netatalk i've got an other problem. i want to install a intranet with mysql. apache and php are installed correctly (i think) but when i want to update a database i've got the next message: "error 1036: Table 'agenda' is read only". my connection with databases is done with user "admin" whose got full access. can anyone help me didier __ Boîte aux lettres - Caramail - http://www.caramail.com
configure eepro
hello i'm didier i've got a problem with a network device. i use the driver eepro100 as module in /etc/modules.conf can anyone tell me, what are the options to regulate the transfert at 10 Mb/s or 100 Mb/s ? thank you in advance didier __ Boîte aux lettres - Caramail - http://www.caramail.com
backing-up a system?
Hello! I meed to make a back-up of a system, I can use removeble HD's and a CD-RECORD, ... but how to make it correctly, oncly a tar from important directories ??? Thanks for all Angel
Re: more network problems
Did you check the gateway? -- Angel Gutierrez Rodriguez, Ph. D. Unit for Cell Biology Wenner-Gren Center P12 Dept. of Biosciences @ NOVUMSveavagen 164 Deja de pensar Karolinska Institutet 113 46 Stockholmsi hicimos bien o mal Halsovagen, 7 SWEDEN si aun nos queda algo que hacer S-141 57 Huddinge hagamoslo bien... SWEDEN Tlf.: 46-8-6089132 Tlf.: 46-8-7369986 Fax : 46-8-7745538 E-mail: [EMAIL PROTECTED]
help me with tar
It's a long time since i wrote here but i've got a problem with tar i want to save some data from a server. So i use tar to compress my files before putting them on a storage band. But when my tar file override 2 GO, the programm exit and i can't save all my data. The server can coutain up to 80 Go of data so what can i do ?? i try to make some Multi-Volumes but it don't work properly Can anyone help me ... Thanks in advance :) _ Le journal des abonnés Caramail - http://www.carazine.com
Audio-CD not readable
Hello!! k I have some audio-cd's that can`t be readed on my CD-reader (and I think that in no one) This CD's are the new "anti-copy" tecnique. I nearly sure that the secret off the anticopy is to pot wrong CRC on fisical media, on some samples. Of course the discograpic give you a player, for windos, and what happend with linux, os/2, mac ...?? My question. I have a IDE CD-reader and a IDE CD-recorder, with ICSI emulation. Wher can I find inside kernel (version 2.2.20) the CRC check for audio/data CD's, I will wanth to switch it off and check if it's posible to read the "bad CD". Or if you have any other idea or know aout ani cd-player that suports this kind of CD`s? Thank you for all Angel Parra Please answer with copy to my address, I not a subscriber!
Euro in spanish keyboard
I have got to get the euro simbol on console, but it doesn work on the xterm neither on other programs like netscape, Where can I find some instalation instructions?? Thank you for all, Angel
Umount problem!!
I think that it can be a sily question .. but I can't remember howto do it If somebody has left a process with an open file on a mount filesystem or a shell with the pwd on it... how can I (root) discover the process to get the filesystem unmounted without the "umount: /filesystem: device is busy" Thank you for all Angel
IBM sServer x306 with Sarge
Hi, I have just installed Sarge in a IBM x306. If I use a 2.4.x kernel all works fine, but when I boot with a 2.6.x kernel the CD-ROM drive isn't detected. I have seen some reported bugs related to the incorrect detection of the CD-ROM drive with 2.6 kernels, but I haven't seen any workaround to the problem. Any advice? Thanks. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
bind problem
Hello! I have a mini-router (linux) with ipmasq, and an internal server. My small server has the bind server, and on normal botting the bind server only servers the names filed on my own database ... but if I stop the bind server and start it again, it works fine. And it also works if I change the booting secuence of bind to be startted-up after network. What it's happening I am using Debian 2.2. Thank you for all Angel
NETSCAPE 6 PROBLEM!
The question is, Were are my plugins??? I Have install the tar.gz version of netscape 6 on my debian 2.2, but if I look for plugins (about:plugins) it didn' t recognize anyone. I supouse that it's an enviroment problem, but I need help Thank all for tour help Angel
can't load library
Sorry to bother the entire list, but I need to ask someone. I loaded some x games and am trying to run them. The error I am getting states as follows: xinvaders: can't load library 'libXmu.so.6' I know that there is a library environment variable that needs to be defined to the /usr/X11R6/lib but don't know what it is, nor do I know how to set it in the bash environment. Any help would be appreciated. If I am not correct, please show me what I am doing wrong. Thanx Angel Leyva ([EMAIL PROTECTED]) http://cybernex.net/~airborne -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Apache Installation
Has anyone else noticed that during the installation of apache ,if you change the default directories for the document root and/or the cgi-bin directory, this is not reflected in the srm.conf file. You have to go into that file, and manually update those paths. While I have your attention, how does one restart the server once these changes are made? Angel Leyva ([EMAIL PROTECTED]) ([EMAIL PROTECTED]) http://cybernex.net/~airborne -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
DNS Request
I am trying to set up DNS on a local network at home and things are not going too smoothly. I wonder if some one is willing to correspond with me via e-mail so that I can get this thing running. I have been reading the HOWTO pages and although it seems to be well written, I believe it assumes the reader has some konwledge of DNS. I want a simple DNS to run on a two node network at home, A win95 machine, and the linux machine. I have installed DNS, and I can get nslookup to run, but since it is not on the internet, I don't get the output that is in the HOWTO documentation. I can restart DNS, and can ping all the entries in my /etc/hosts file, if this is relavent. Angel Leyva ([EMAIL PROTECTED]) http://cybernex.net/~airborne -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Default Window Manager
I have X installed and running fine, using xinit. When I start the X environment, I get no window manager at all. How can I get X to start a window manager by default? Angel Leyva ([EMAIL PROTECTED]) http://cybernex.net/~airborne -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
CTRL/ALT/+|-
Hi all, I am wondering why I can't switch the resolution of my monitor using the CTRL/ALT and + or -. In XF86Setup, I chose to allow this, but am unable to. What would prevent this? I have a Standard IBM 8512-001 monitor. I know that I had this working at one time. Thanx Angel Leyva ([EMAIL PROTECTED]) http://cybernex.net/~airborne -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
AHA2842 boot problems
Hello all... Trying to install debian 1.2 on my 486-100 VLB with an Adaptec 2842a VESA LB host adapter. After Entering the "linux aic7xxx=extended,noreset" when booting from the resq1440.bin disk. I get the messages: scsi0: BRKADRINT error(0x1): Illegal Host Access Kernel panic: scsi0: BRKADRINT, error 0x1, seqaddr 0x0. In swapper task - not syncing Can anybody out there recommend what I need to be doing in order to get Debian 1.2 running over this adapter ??? Angel Leyva ([EMAIL PROTECTED]) http://cybernex.net/~airborne -- TO UNSUBSCRIBE FROM THIS MAILING LIST: e-mail the word "unsubscribe" to [EMAIL PROTECTED] . Trouble? e-mail to [EMAIL PROTECTED]
Re: Install xfree and gnome
Voicu Liviu wrote: > Hi debians :-) > I'm pretty new on debian so please understand me :-) > > I have installed the base system of STABLE ver 3. > > I also made the /etc/apt/sources.list file with my local mirrors. > Now I try to run: > #apt-get install xfree > and I get not found, also the same message for gnome. > > Please, any idea what do I have to do? > Best Regards, > Try: - apt-get install xfree86-common or - apt-get install nautilus or - apt-get install kde -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
lilo problem!!!!!!!
Hello I need to install lilo on a HD on a machine that see it as /dev/sdc and use it to boot linux (root=/dev/sdc1) on a machine that see it as /dev/hdc (root=/dev/hdc1). My problem is that second machine realy is not a PC, so I must create disk on a PC. Can you give me a clue??? Thank you for all Angel -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
RE: Installing Debian r3.0?
Hi Kent, > /dev/cdrom is usually a symlink to the actual device file. > SNIP > in which case it'd be accessed via /dev/hdc (/dev/hda for > master on primary, /hdb for slave on primary, and /hdd for > slave on secondary). Well there you go ... I've just learned something new (that CD's can be addressed as /dev/hd :-) Yes it worked BTW ... although the entire Debian process is a little bit over-complex for one poor little brain-damaged Windows user. I'm working on that though ... call it a work-in-progress :-) Thanks James "Undead Hedgehog" Rocks Editor: Not Decided Yet -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
hi
http://lizaclub.da.ru http://lol.to/bbs.php?bbs=shakira <<< VIP Today Sally. NOT NEED CREDI CARD - PARTY 1. VIDEO 16MB PARTY 2. VIDEO http://pluginaccess.com/?w=preview&type=exe 3MB <<< try now PARTY 3. VIDEO 22MB PARTY 4. VIDEO 33MB PARTY 5. VIDEO 49MB PARTY 6. VIDEO 154MB Modem/ISDN Users: This archive features hundreds of movies therefore the movie previews on this page may take a bit of time to load for you, however please be patient, it will definitely be worth the wait. %100 FREE Rus-SexServer -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
hi
http://lol.to/bbs.php?bbs=offspring Username: LIZA-ROOM-008 Password: XF459J -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
USB network adapter with no connectivity
Hello guys: I'm running Proxmox 7 which is based on Debian Bullseye (11). I connected a TP-Link USB 3.0 network adapter on USB 2.0 ports of a IBM System x3550 M4 server. According to what ethtool reports, there's Link detection on this network adapter. However, I cannot make it work with a valid IP address. I set a fixed private IP address and try to ping another host in the same network (same ethernet switch) and there's no response. When running tcpdump on the USB network interface, I only see a few ARP packets trying to find the MAC address for the destination host. Any ideas? Is this USB 3.0 adapter supposed to work when connected to a USB 2.0 port? I'd really appreciate some suggestions for troubleshooting. Thanks in advance guys
Re: USB network adapter with no connectivity
Hi: > Does "ip a" show BROADCAST,MULTICAST,UP or > BROADCAST,MULTICAST,MASTER,UP,NO-CARRIER? > > This is how it looks: 6: enx42f2e9ecec39: mtu 1500 qdisc pfifo_fast state UNKNOWN group default qlen 1000 > Any ideas? Is this USB 3.0 adapter supposed to work when connected to a > USB > > 2.0 port? > > If you're seeing something with the ethtool - this adapter certainly > does work somehow. You'd see the lack of NIC otherwise. > > I'd start with disabling auto-negotiation (you do have ethtool, after > all), and forcing the link to 100 Mbps half-duplex. If it does work - > I'd try 100 Mbps full-duplex and only then I'd move to 1 Gbps. If it > does not - I suggest replacing your device with something USB > 2.0-compliant, anything that uses asix kernel module should do. > > Good idea. I'll do some tests with all these combinations of duplex, speed and auto-negotiation settings. Oh, and check the Ethernet cable. These USB NICs are (in)famous for > inability to convert cross-over cables to straight ones and vise-versa. > > I don't think I have cross-over cable at this moment, but I'll try directly connecting these two hosts with a direct and cross-over cable (I'll need to buy one). Reco > >
Re: USB network adapter with no connectivity
Hello guys: I appreciate your help in this thread. At the end of the day, I found the issue and solution: The driver being used by default was "cdc_ether" which seems to be buggy for my USB ethernet card, but once I built the r8152.ko module, everything started working fine.
Necesito ayuda
Tengo un Amd K6 II a 450 mhz, montado en una placa Superb1 de QMI Legend. El sistema operativo instalado es la Linux-Debian (slink), !hasta que salga la potato!. Pero al configurar las x no puedo (o no se) configurar la sis530 y por lo tanto aun no he podido montar las X-windows. En la Linux - Mandrake si venia el driver de esta placa y pude montar las x. Por favor si puedes arrojar un poco de luz sobre este tema te lo agradeceria profundamente Un saludo Miguel Angel Gonzalez[EMAIL PROTECTED]
Corel/Linux OS
Hi, I'm using Linux OS from Corel and I'm having problems trying to access my floppy drive from the Desktop. Please can anyboby help me? Also I would like to buy a instructions book, if there is any, about Debian Linux. Thank you. Angel Los Angeles, CA.
Re: pppd trouble..
Hello > /AutoPPP/ -a_ppp /usr/sbin/pppd auth login debug crtscts modem > ms-dns 208.222.179.31 lock proxyarp (my local ip):(remote ip assigned to > modem) > also, the system is not detecting when the line hangs up, i logged off 8 > minutes ago and it still shows the connection, i suspect its the modem im > gonna play with INIT strings or swap modems and see whats goin on, > wondering if i can use idled to terminate the connection after being idle > for XX minutes? or does that not work on serial lines? i figured it > would.. try to adding '-detach' option
Re: Manual java alternative
El jue, 04-01-2007 a las 11:34 +0100, Marko Randjelovic escribió: > I installed jdk1.6.0 in /opt by running sun's package > "jdk-6-linux-amd64.bin". Now I need to update alternatives, but there > are 64 of them and that would be to complicated. I made a file > .jdk.jinfo in /usr/lib/jvm and tried to run update-java-alternatives, > but it looks like it doesn't work. > > Is there some way to easily switch to new java that is not installed > with .deb? Or is there some Debian package for jdk6 or jdk-1.5.0_8, > since this newest 1.5.0_10 made me problems? > Instead of directly install java from sun's binary, use the java-package tool to create a deb from this binary, then install the deb file. I'm not sure, but I think this same you get the alternatives updated. -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica_(___V Tfo: 968367590 Fax: 968398337 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Eudora -> Evolution how?
El mié, 10-01-2007 a las 21:39 +, Andrew M.A. Cater escribió: > I've a colleague on the phone now: he wants to transfer Eudora mail > archives from a Windows partition -> Evolution under Debian - Testing. > I think that eudora uses mbox files for the mail folders. All that you have to do in evolution is to import that files, one by one. A little tedious, but easy. If you also want to import addressbook, you have to export it in eudora to something understable (csv or ldif for example) and then import it into evolution. I have also found this (with an apt-cache search eudora): 2vcard - A little perl script to convert an adressbook to VCARD file format Maybe it helps. -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica_(___V Tfo: 968367590 Fax: 968398337 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Gnome panel already running - error message
El mar, 06-09-2005 a las 10:09 +0700, Ms Linuz escribió: > I had this problem and solved by editing my gnome2 session file. > $home/.gnome2/session > I found two entries of gnome-panel there and delete one ( backup first > of course ) > Make sure you delete all line which start with the same number as > gnome-panel > I have tried this several times. When I do it, the next time I enter in gnome, all works fine. But the problem is there in subsequent logins. -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA)/ \\ http://www.um.es/atica _(___V Tfo: 968367590 Fax: 968398337 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: SSH and compression
El jue, 27-06-2002 a las 07:54, nate escribió: > > i dont think SSH's compression should affect security either way. > I use it mostly out of habbit, it can sometimes improve the responsiveness > of a connection. > > I would expect if compression did affect SSH's security it would > be documented and well known ... > Why it hast to be a problem? Finally, you have an encrypted message, so what is the problem? If ssh encrypts first and then compresses, you can uncompress the message, but then all you've got is an encrypted message. By other side, if ssh compresses first and then encrypts, you can't even uncompress the message because you have to decrypt it previously. -- Angel L. Mateo Redes y Comunicaciones - ATICA Tfo: +34 968 367590 Universidad de MurciaFax: +34 968 363389 Edificio D, Campus de Espinardo CP: 30100, Murcia -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: High availability interner connection
Hello, For the linux boxes maybe you could try the metric parameter for the route add command. In this way you could define two default servers with different metrics. If the first doesn't work I guess it should try with the second. I haven't tried this, but it's a line to investigate it. For the windows computers, I have no idea :-( -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA)/ \\ http://www.um.es/atica _(___V Tfo: 968367590 Fax: 968398337 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Debian on hp blade bl25p
Hello, I want to know if anybody of you had ever success installing debian sarge on HP blade's bl25p with an Opteron Dual Core processor, because we are planning to buy these servers. Thank you in advance -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica_(___V Tfo: 968367590 Fax: 968398337 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: source code editor
El jue, 01-06-2006 a las 10:12 +0200, Ivan Glushkov escribió: > Hi all, > > I would like to know which is the best & lightest editor for source code > editing, which supports syntax highlighting. Currently when I want to > edit fast some C/C++ file I am opening it with pico. I looked around, > but it seems like it does not support syntax highlighting. > Have you tried vi? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica_(___V Tfo: 968367590 Fax: 968398337 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Is Xen for Stable/Unstable distro a good idea?
El mar, 27-06-2006 a las 18:01 +0300, David Baron escribió: > > 1. Is Xen mainly for sharing multiple operating systems running together, > > or are there some other really interesting uses? > > Xen is an advanced virtual machine. You can run one version of linux or such > inside your installed version. Useful for testing the new version out, > running things in a protected environment. I am no expert but I do not > believe "sharing" is going on. > > Less advanced, easy to set up and use is qemu (using the kqemu accelerator > kernel module). > > Both run off disk images, not real file systems. > This is not true. I don't qemu well, but I think it could use a real filesystem. And I am sure that xen can use it. It could you the filesystem type you want (a file, a real filesystem in a partition, a filesystem in a logical volumen, an iscsi disk, etc.). All you need is that your kernel support it. There is a real very interesting use: the use of virtualization to consolidate servers. One of the problems of organizations is the number of infraused (is this the english word?) servers. With virtualization you can use one physical servers to deploy several virtual servers (one server as email server, another for web, another...). For this kind of use, xen is a good solution. Another (non-free) solution could be vmware esx. qemu is not a solution. In fact, there are service providers that offers virtual servers for renting. -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica_(___V Tfo: 968367590 Fax: 968398337 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
problems with gnome
Hello, I used redhat 7.2 with ximian gnome until this week that I have installed debian instead of redhat. I installed potato and then I upgraded to woody. To install ximian gnome I add deb http://red-carpet.ximian.com/debian stable main to the sources.list file and then I run "apt-get update; apt-get install task-ximian-gnome" (as I found in ximian website). The problem is that there is gnome software not running in my system. gnome-terminal doesn't work, when I try to run it, I get: # gnome-terminal gnome-terminal: relocation error: gnome-terminal: undefined symbol: zvt_term_set_meta_use_high_bit # other program that doesn't work is red-carpet. When I run it I get a dialog error window with a button to make a bug report. Does anybody know where is the problem? -- Angel L. Mateo Redes y Comunicaciones - ATICA Tfo: +34 968 367590 Universidad de MurciaFax: +34 968 363389 Edificio D, Campus de Espinardo CP: 30100, Murcia -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: sshd and tcp wrappers
El lun, 20-05-2002 a las 03:18, Tom Allison escribió: > IIRC, ssh includes the tcpwrapper for access. This means that it also > looks as the /etc/hosts.allow and /etc/hosts.deny files. > > I want to configure sshd such that it allows certain domains to be accepted. > I was adding "sshd: .domainname.com" to the hosts.allow file, but > tcpdchk complains that it's not a wrappered application. > This is because you don't have sshd in inetd.conf. Ignore the message. -- Angel L. Mateo Redes y Comunicaciones - ATICA Tfo: +34 968 367590 Universidad de MurciaFax: +34 968 363389 Edificio D, Campus de Espinardo CP: 30100, Murcia -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: LDAP support in sudo
El jue, 03-11-2005 a las 09:35 -0200, Bruno Diniz escribió: > Hi guys, > > I'd like to have LDAP support in sudo package. In fact, sudo already > have compilation-time option to support LDAP, but it is not used by > Debian mantainer. Why is that? What do you suggest of doing to have > sudo get its sudoers from LDAP? > Does sudo supports PAM? If it does, configure sudo's pam configuration to use ldap, and you won't need to recompile it. -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA)/ \\ http://www.um.es/atica _(___V Tfo: 968367590 Fax: 968398337 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Gestor de claves linux/windows
Hola, Necesito una aplicación que nos permita compartir un fichero de claves entre varios usuarios. Ahora mismo estamos usando en linux mypasswordsafe y el equivalente en windows (que no se cómo se llama, yo soy de los que utiliza linux). Para compartir el fichero de claves, lo tenemos bajo subversion. El problema que tenemos en esta configuración es que el fichero que se genera con mypasswordsafe es un fichero completamente cifrado, luego hay veces que nos da problemas con el subversion (si yo modifico y un compañero modifica a la vez en su copia, luego al subir al subversion da conflictos y solo se puede hacer una mezcla manualmente). Entonces estoy buscando una aplicación de gestión de claves que permita guardar en un fichero en modo texto. Algo como el formato XML o texto del mypasswordsafe, pero con la clave cifrada claro (que estos formatos guardan la clave en claro). La aplicación debe tener una versión en linux y otra en windows (o aunque no sea la misma aplicación en un so y otro, que si que haya una aplicación en cada so capaz de trabajar con ese formato de fichero). ¿Alguna sugerencia? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica_(___V Tfo: 968367590 Fax: 968398337 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Gestor de claves linux/windows
Sorry for posting in spanish. I thought I was writting to the spanish list :-( The question is that I need a password manager that runs on linux and windows. Now, we are using mypasswordsafe (I don't know the specific program runned in windows by my partners). To share the password database, we use subversion. The problem we have is that the file generated by mypasswordsafe is in binary mode, so we have problems with subversion: sometimes the file is modified by two of us and this generates conflicts in subversion (because it can't merge them) that we have to solve manually. So, I'm looking for a password manager (compatible with linux and windows) that stores the database in a text file (of course, with the password crypted) or, at least, that generates a file per password entry. Any suggestion? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica_(___V Tfo: 968367590 Fax: 968398337 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
any sarge repository?
Hello, We need to install some packages in an old sarge server. It seems that debian doesn't have this repository online. Is there any sarge repository online? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica_(___V Tfo: 968367590 Fax: 968398337 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
debian lenny serial console garbage with a cyclades
Hello, I have a few dell poweredge servers (with debian lenny) connected through a serial port with a cyclades console server. I can log in into the cyclades and connect to one of this server. Then, I can see the boot of the server and so on. The problem I have is that during the boot, while loading drivers, when it loads serial driver, I get a lot of garbage and console doesn't work until login (that is, I can't see messages displays by init.d scripts). When login is run, it works again without any problem. The garbage I get is: [2.982482] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharingd [2.991704] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [2.998232] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Debian GNU/Linux 5.0 felis116 ttyS0 felis116 login: Then, I can't see anything until login is reached. The cyclades configuration for this port is (I configured it as a Console (Telnet) port): s26.tty ttyS26 s26.alias felis116 s26.issue \r\n Welcome to Console Server Management Server %h port S %p \n\r\n s26.speed 115200 s26.datasize 8 s26.stopbits 1 s26.parity none s26.flow none s26.dcd 0 any idea? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica_(___V Tfo: 868887590 Fax: 86337 -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Re: debian lenny serial console garbage with a cyclades
El vie, 06-11-2009 a las 19:08 +0100, Emanoil Kotsev escribió: > What's your kernel line on boot? > > I have this one > > kernel /vmlinuz-2.6.26.2eko2 ro console=0,115200 > I have this: title Debian GNU/Linux, kernel 2.6.26-2-686 root(hd0,1) kernel /boot/vmlinuz-2.6.26-2-686 root=/dev/sda2 ro rootdelay=10 console=ttyS0,115200n8 console=tty0 initrd /boot/initrd.img-2.6.26-2-686 I have tried with your configuration, but I get the same error. -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica_(___V Tfo: 868887590 Fax: 86337 -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Duda entre LVM y CLVM
Hola, Voy a montar un conjunto de servidores de virtualización. Las máquinas virtuales las voy a tener en un almacenamiento compartido (iscsi) dentro de volúmenes LVM. En principio, tendré un único VG y dentro varios VM, digamos vm1-disk, vm2-disk, etc... En cada instante, cada uno de esos VM estará activo en un único servidor de virtualización. Con este esquema, ¿necesito realmente cLVM? ¿o puedo utilizar LVM? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica_(___V Tfo: 868887590 Fax: 86337 -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Re: Duda entre LVM y CLVM
On 10/02/10 14:53, Stephen Powell wrote: On Wed, 10 Feb 2010 03:24:01 -0500 (EST), Angel L. Mateo wrote: Hola, Voy a montar un conjunto de servidores de virtualización. Las máquinas virtuales las voy a tener en un almacenamiento compartido (iscsi) dentro de volúmenes LVM. En principio, tendré un único VG y dentro varios VM, digamos vm1-disk, vm2-disk, etc... En cada instante, cada uno de esos VM estará activo en un único servidor de virtualización. Con este esquema, ¿necesito realmente cLVM? ¿o puedo utilizar LVM? This list is for English. Repost in English or post in the original language to the appropriate list (debian-user-spanish, debian-user-portuguese, etc.) Sorry, I guessed I was writting to the spanish list :-(. The translation: I am planning to deploy a virtualization server farm. I'm going to deploy several virtual machine servers (xen). The VM are going to be storaged in a shared storage (iscsi) with LVM volumes, all of them in the same VG. In a specific point of time, each VM will be running in just one xen server, so its LVM will be used in just one server. With this scheme, do I need cLVM? or can I use LVM? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica_(___V Tfo: 868887590 Fax: 86337 -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
RE: Copy entire filesystem
> So far I haven't succeeded. I haven't been able to confine tar's action to > a single filesystem (so that directories linked to directories on other > filesystems, on the other system drive, will not be copied. Included is the > linux boot filesystem, /dev/hda2. I basically want the current drive > duplicated to the new drive, with larger partitions, and another partition. Hello... I do this lastweek: Mount new partition mount -t ext2 /dev/hdd2 /mnt List a directory find /bin -depth > file.bin Copy cpio -p -v -d -u /mnt < file.bin Doing find / -depth > file and cpio -p -v -d -u /mnt < file seems not work at all: I get file /mnt/bin/bash : data. Sorry for the bad english. Angel Vicente Perez Dpto. Informática KNIPPING ESPAÑA S.A. Tfno. +34-1-6070-311 Fax +34-1-6070-331 e-mail [EMAIL PROTECTED]
Compiling tetex-bin
Hi all... I'm trying compiling tetex-bin_0.9.980706-1, and i get this message while compiling web2c: TEXMFCNF=../kpathsea TEXMF=/usr/lib/texmf make -w CC='egcc' CFLAGS='-O2 -mpentium' files="--progname=latex latex.ltx" prereq-check make[4]: Entering directory `/root/trabajo/tetex-bin-0.9.980706/texk/web2c' ../kpathsea/kpsewhich --progname=latex latex.ltx >/dev/null || make prereq-lose >/dev/null make[4]: Leaving directory `/root/trabajo/tetex-bin-0.9.980706/texk/web2c' TEXMFCNF=../kpathsea TEXMF=/usr/lib/texmf ./tex --progname=latex --ini \\input latex.ltx \inaccessible ... l.194 ...xists{:[EMAIL PROTECTED]:}}{}}} ? ! Emergency stop. \inaccessible ... l.194 ...xists{:[EMAIL PROTECTED]:}}{}}} No pages of output. Transcript written on latex.log. After this, stop compiler and i no get *xdvi* Any ideas? Thanks in advance. Angel Vicente Perez Dpto. Informatica KNIPPING ESPAÑA S.A. Tfno. +34-1-6070-311 Fax +34-1-6070-331 e-mail [EMAIL PROTECTED]
Re: Alternastive to using squid
Patrick Kirk wrote: > > Hi all, > > I have a P200MMX with 32MB of RAM and 2 NICs that I want to use as a gateway > machine to the Internet. > > I do not need the caching, etc. that one gets with squid. What do I need to > do just to have internet access via this machine? > > Patrick > > -- > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null If you only have one IP address, and you want to give full access. You only need to read the "IP-masquerade" in the /usr/HOWTO/mini. Angel -- Ángel Parra Cerrada Email: [EMAIL PROTECTED]
RE: Upgrading to hamm
> Only on systems that have run 2.0.33. All systems running 2.0.32 are > fine. There are none of the problems that Red Hat has been having with > its 5.0 release. I'd like more info about kernel 2.0.33. We have a linux box running 2.0.33 and nearly all packets from hamm, and I afraid... -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
RE: PPP dies early / some progress
> On Thu, 16 Apr 1998, Erik van der Meulen wrote: > > I have made some progress towards solving the problem. It > > turns out that my machine insisted on having the IP address > > for the session with my ISP, which is used as address for the > > serial device on incoming connections. I have defined this in > > my /etc/ppp/options.ttyS0. If I remove that entry, the connection > > gets established. Now I have to find a way to use the serial interface > > for both incoming and outgoing connections. Any ideas? > Changing it manually:) > Well, perhaps setting up something that will do this when you switch > modes. > If you remove that file, you can explicitly name the IP address when you > start ppp for an incoming connection. > ppp also has the ability to suggest an IP address, but to accept whatever > the remote demands. An incoming box should listen to the suggestion, > whereas your ISP will override it. > > > Unfortunately, after this not all is well. After pppd exchanges IP > > addresses, it reports something like: > > ppp not replacing default route to eth0[192.168.1.255] > > This is my network board. So I am still not talking to the > > world. > Your box thinks that it can reach the world via your ethernet card. > Shatter it's illusions. > Somewhere in the bootscripts, you will have a "route add default gw" line > which you don't want. Then you will have no default gateway, and ppp won't > think twice about setting your ISP up as your gateway. I'm using this file : ip-up and work #!/bin/sh # # $Id: ip-up,v 1.1 1996/01/31 21:25:59 alvar Exp $ # # This script is run by the pppd after the link is established. # It should be used to add routes, set IP address, run the mailq # etc. # # This script is called with the following arguments: #Arg Name Example #$1 Interface name ppp0 #$2 The ttyttyS1 #$3 The link speed 38400 #$4 Local IP number12.34.56.78 #$5 Peer IP number12.34.56.99 # # The environment is cleared before executing this script # so the path must be reset # PATH=/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin export PATH route -v del 127.0.0.4 sl0 route -v del default sl0 route -v add default gw $5 $1 insmod bsd_comp insmod ip_masq_ftp exit 0 # last line Angel Vicente Perez Dpto. Informática KNIPPING ESPAÑA S.A. Tfno. +34-1-6070-311 Fax +34-1-6070-331 e-mail [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
RE: gnome
Try installing esound packages. > -Mensaje original- > De: Paulo Silva [mailto:[EMAIL PROTECTED] > Enviado el: martes 2 de febrero de 1999 1:38 > Para: debian-user@lists.debian.org > Asunto: gnome > > > > Hello, > > Did anyone out there succeded on running the new gnome stuff on > unstable. I've installed some 0.99.3 deb from there. Whenever > I try to > terminate the session from the panel I get the following error: > > panel: error in loading shared libraries > /usr/lib/libgnome.so.31: undefined symbol: esd_sample_getid > > I have gnomelibs 0.99.4-2 installed. > > I know this is alpha but I would like to know if everything crashes > the penel (for example if I try to remove the default clock applet), > the help-browser (click on gnome user guide link). > > Maybe I have some mixed libraries (I had gnome 0.30 installed). > > Paulo. > > > > -- > Unsubscribe? mail -s unsubscribe > [EMAIL PROTECTED] < /dev/null > >
RE: Printer trouble
Try lp:/dev/lp0 > -Mensaje original- > De: R. Marx [mailto:[EMAIL PROTECTED] > Enviado el: viernes 9 de abril de 1999 10:49 > Para: debian-user@lists.debian.org > Asunto: Printer trouble > > > Hello, > I'm having trouble getting my printer to respond to any > input from > the lpr command. Currently I'm running slink and am using a HP DJ882c > printer. I've been trying to use magicfilter, but only have > the df550c > filter (this did work pretty well on the 1.3 release...bad resolution > though). Anyhow, I'm using the same setup, but I don't get > any response > from the printer when a job is sent to it. If I lpr > something then check > it with lpq, the status field is updated with the time of the > print job. > > My printcap looks like this: > > lp|Generic dot-matrix printer entry > :lp=/dev/lp1 > :sd=/var/spool/lpd/lp > :if=/etc/magicfilter/dj550c-filter > :af=/var/log/lp-acct > :lf=/var/log/lp-errs > :pl#66 > :pw#80 > :pc#150 > :mx#0 > :sh > > If anyone has any ideas, that would be great. I should > mention that I'm > still pretty new at sys admin stuff, so any help would be appreciated. > > Thanks, > Rob > > > -- > Unsubscribe? mail -s unsubscribe > [EMAIL PROTECTED] < /dev/null > >
RE: printing problem
> > Hi > I have use magicfilerconfig --force . > I fillin everything for a hp deskjet500 say done and enter. > When I run : lpr file the printer is being initialize and further > nothing happens. > My printerport is /dev/lp1. > echo "test" > /dev/lp1 works. > Any idea. If you are using lprng, try checkin spool system by running checkpc.
RE: mc not working (?)
> /usr/bin/mc: fork: resource temporarily not available. > I found out that the harddisk activity was due to a lot of > files being created > in /tmp, 50-100 or so. > They all looked like this; > mcX-YY > with the X's being numbers starting at 20443, looking very > much like a PID, and > the Y's just looking like random numbers. Hello... Try mc.real, mc is a script and seem like a recursively autocall.
SUSPENDER LA SUSCRIPCION
DESEO SUSPENDER LA SUSCRIPCION A ESTA LISTA: [EMAIL PROTECTED]
Re: IBM Rack Server recommendation
El sáb, 30-10-2004 a las 10:59 +0530, Rishi escribió: > > Thanks for this info. Can anyone recommend a branded 1 U Rack server > that works on Debian GNU/Linux? > I have debian (woody and sarge) running on dell servers (PE 1750 and PE 2650) and IBM servers (x350 series). -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica _(___V Tfo: 968367590 Fax: 968398337 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: ibm xseries
El jue, 18-11-2004 a las 06:18 -0800, mchael chileshe escribió: > Hi > > I have a ibm @server xseries 220 machine, and debian installation can > not pick the on board ethernet card. > > How can i configure the on board card? > > I have already installed debian 3.0 using a 3com pci network card. I > am migrating from redhat. And this is the only obstacle in this > process... I installed debian woody 3.0 in an ibm xserver 335, but I had to use a personalized installation CD with the RAID and ethernet drivers included. Last week I reinstalled debian in that computer, but debian sarge (from the official CD) and I had no problem with the installation. -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica _(__V Tfo: 968367590 Fax: 968398337 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: LDAP Authentication issue.
El jue, 16-12-2004 a las 15:24 +, U n d e r a c h i e v e r escribió: > My problem is that local logins for the new (ldap only) users don't > work where password authentication is required:- > Can you bind to the ldap directory using that user? I think that userPassword has to be able to be read by the user (every user could read his password) to login. -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica _(__V Tfo: 968367590 Fax: 968398337 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: How to install debian on IBM X336 eserver
El jue, 05-05-2005 a las 12:18 +0300, Nasir Ali escribiÃ: > Hi every one there, > > > > Is any one tried to install Debian on IBM Machine Model: eServer > X336, I am unable to find the way how to installâ > I installed debian sarge on a xserver 335 without any problem. Try with the CD of sarge. -- Angel L. Mateo MartÃnez SecciÃn de TelemÃtica Ãrea de TecnologÃas de la InformaciÃn _o) y las Comunicaciones Aplicadas (ATICA)/ \\ http://www.um.es/atica _(___V Tfo: 968367590 Fax: 968398337 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: [PATCH] restoring tg3 driver to latest 2.6.5 source
Hello, Thank you for distributing this patch. I have some IBM xSeries servers that also has a network card that uses the tg3 module (I don't know if it's the same card or not). I have them with a customized 2.6.3 kernel. This week I have tried to update to 2.6.5 in debian way, that is, make a deb from kernel-source package, but I couldn't. But I'm lost with the problem. I haven't followed any thread that could the origin of this problem. Can anybody clarify what the problem is? Mensaje citado por Eric Sproul <[EMAIL PROTECTED]>: > Hi, > First let me say that I'm not taking sides in the debate over binary > firmware in kernel code. I am not a developer, I'm just a user who > needs functionality. I'll leave it to real developers and various > zealots to hammer out a final solution, but in the meantime, I need to > get back to work. > > In that vein, I am attaching a patch that will restore the tg3 driver in > 2.6.5, since it was removed by the kernel maintainer. This patch > contains modifications to drivers/net/Makefile and drivers/net/Kconfig, > as well as the contents of drivers/net/tg3.[ch] from the kernel.org > 2.6.5 source. Apply this patch from /usr/src/kernel-source-2.6.5, and > you can build your own kernel with this driver included. You will need > to add 'CONFIG_TIGON3=m' (or =y if you want it built-in) to the > "Ethernet (1000 Mbit)" section of your .config along with whatever other > changes you want to make. With a little tweaking, this could probably > be made to work on the 2.4.26 tree as well, using the tg3 source from > kernel.org's 2.4.26 source. > > I did this because I need to run a current kernel on HP ProLiant DL > servers. The DL360 and DL380 models contain tg3-based Broadcom GbE NICs > (aka "NC7781" on HP spec sheets) and if you run the current stock Debian > kernel 2.6.5/2.4.26 you will not have network functionality. If Sarge > is released containing a kernel >=2.4.26 or >=2.6.5, it will not be > fully installable/functional on these servers or any other board with a > built-in tg3 chip. If you rely on a tg3-based NIC you should be aware > of this shortcoming. I am not sure what other ProLiants have > > Again, I'm not trying to start a flamewar or make a political statement, > I'm just providing information that might help owners of machines with > these NICs to get going again. > > Cheers, > Eric Sproul > -- Angel L. Mateo Martínez Sección de Telemática Area de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica_(___V Tfo: 968367590 Fax: 968398337 - This mail sent through IMP: http://horde.org/imp/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: TLS client
El Jueves, 13 de Febrero de 2003 13:55, Craig Jackson escribió: > I know Kmail and Evolution both support TLS. I have both installed on my > machine as Testing, but see no way to use TLS in either. I tried > installing unstable, but encountered dependency errors. > You don't need unstable to use TLS with evolution or Kmail. I used evolution and now I use Kmail (kde 3.1), both with stable. > Sorry, but the following packages have unmet dependencies: > evolution: > Depends: gtkhtml1.1 (>= 1.1.8) but it is not going to be installed > Depends: libcamel0 (= 1.2.2-1) but 1.0.5-1 is to be installed > Depends: bonobo (>= 1.0.22) but 1.0.20-2.1 is to be installed > Depends: bonobo-conf (>= 0.16) but 0.14-1 is to be installed > Depends: libbonobo-conf0 (>= 0.16) but 0.14-1 is to be installed > Depends: libbonobo2 (>= 1.0.22) but 1.0.20-2.1 is to be installed > Depends: libc6 (>= 2.3.1-1) but 2.2.5-14.3 is to be installed > Depends: libcamel0 (>= 1.2.2) but 1.0.5-1 is to be installed > Depends: libfreetype6 (>= 2.1.3-5) but 2.1.2-9 is to be installed > Depends: libgal21 (>= 0.23) but it is not going to be installed > Depends: libgdk-pixbuf-gnome2 (>= 0.22.0-1) but 0.20.0-1 is to be > Depends: libgdk-pixbuf2 (>= 0.22.0-1) but 0.20.0-1 is to be installed > Depends: libgnome-pilot1 (>= 0.1.70) but 0.1.64-1 is to be installed > Depends: libgtkhtml1.1-3 (>= 1.1.8) but it is not going to be installed > Depends: liborbit0 (>= 0.5.17) but 0.5.16-1 is to be installed > Depends: libsoup3 but it is not going to be installed > Depends: libssl0.9.7 but it is not going to be installed > E: Sorry, broken packages > > --fix-broken didn't help. > Should I try --force-yes? > > Thanks, > -- > > Craig Jackson > __ > Wildnet Group LLC > 103 North Park, Suite 110 > Covington, Lousiana 70433 > Office 985-875-9453 > __ -- Angel L. Mateo Martínez Sección de Redes y Comunicaciones Area de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica_(___V Tfo: 968367590 Fax: 968363389 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: TLS client
El Jueves, 13 de Febrero de 2003 15:32, Rob Weir escribió: > > > > You don't need unstable to use TLS with evolution or Kmail. I used > > evolution and now I use Kmail (kde 3.1), both with stable. > > I dunno about evolution with TLS support, but kmail 3.1 certainly isn't > in stable. Yes, you are right. I meant that I have woody (stable) with kde 3.1, installed (.deb) from kde. And the evolution I tried I think it was the evolution from woody. -- Angel L. Mateo Martínez Sección de Redes y Comunicaciones Area de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica_(___V Tfo: 968367590 Fax: 968363389 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
MySQL over NFS
Hi, I've got to install a MySQL server with a hihg availabity configuration: one MySQL server running and the other in standby. I was thinking about using a NAS serving NFS partitions. But I have read documents about database servers (like oracle and others) not running well over NFS filesystems (because they use raw files). Do you know if there is any problem to run MySQL over a NFS filesystem? Or do you know any other way to configure MySQL with high availabiliy? Or course, running MySQL in debian servers (woody). -- Angel L. Mateo Martínez Sección de Redes y Comunicaciones Area de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica_(___V Tfo: 968367590 Fax: 968363389 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Sobre postfix!
No se, solo como idea... ¿lo ejecutas en un entorno chroot? Si es así, comprueba que el grupo postdrop también lo tienes en el chroot. El jue, 06 de 03 de 2003 a las 17:48, Xavier Farrarons Clusella escribió: > Hola listaaa!!! > > Bueno pues, os cuento; mi postfix sempre ha andado bien, pero desde ayer > no me deja enviar mensajes y me sale el siguiente error: > sendmail: fatal: file /etc/postfix/main.cf: parameter setgid_group: > unknown group name: postdrop > > Y la verdad que no se porque sucede esto; he mirado en el /etc/group y el > postdrop esta como siempre, o sea ke no se que sucede! > > Muchas gracias por vuestra ayuda! > > > > *** > Departament tècnic > Xavier Farrarons Clusella > [EMAIL PROTECTED] > > Esto es un viaje a traves de Asia, cruzando los Himalayas, entre > la India y Nepal, pasando por Katmandu, los lagos de pocara, en busca de > nuestra Flor de Loto. > Heroes del silencio > > ** -- Angel L. Mateo Martínez Sección de Redes y Comunicaciones Area de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica_(___V Tfo: 968367590 Fax: 968363389 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Postfix Log Analyser
El vie, 04 de 04 de 2003 a las 16:59, GBV escribió: > Hi all, > > Anyone know how to install and configure a good log analyser to use > with postfix mail.log and mail.info ?? In postfix web page (www.postfix.org) you have addon software some of them are logs analyzer. But I haven't tried anyone. -- Angel L. Mateo Martínez Sección de Redes y Comunicaciones Area de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica_(___V Tfo: 968367590 Fax: 968363389 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
what is this?
what is this? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: NFS share: cannot write
Unless you configure the share to mount it as root, when you mount a nfs share, you use nobody, so if nobody can't write to the directory, you can't write. El sáb, 13-09-2003 a las 01:32, Joan Tur escribió: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > Hallo! > > I've set up an NFS share (server runs Woody), and I can mount it from the > allowed computer, but I cannot write to it from the client 8-? > > Here are the configs: > Server: > - - > quiniserver:/# cat /etc/exports > # /etc/exports: the access control list for filesystems which may be exported > # to NFS clients. See exports(5). > /Dades quinipt(rw) > - - > > Client (from /etc/fstab): > - - > quiniserver:/Dades /Dades nfs rw,hard,intr0 0 > - - > > No idea on what's going on 8-/ > > Thanks !! ;) > - -- > Joan Tur. Eivissa-Spain > Jabber, Yahoo & AIM: quini2k > www.ClubIbosim.org > Linux: usuari registrat 190.783 > -BEGIN PGP SIGNATURE- > Version: GnuPG v1.2.3 (GNU/Linux) > > iD8DBQE/Yleiok8j9RhtetwRAkLRAKCe/WbBRstuRKxsOA6RKuVNMMRjnQCdFz+u > MzTOFPxlMa+WLUvVzGkgxeI= > =Te9y > -END PGP SIGNATURE- -- Angel L. Mateo Martínez Sección de Telemática Area de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica_(___V Tfo: 968367590 Fax: 968228337 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Galeon 1.3.4
El jue, 05 de 06 de 2003 a las 17:59, Jason Lunz escribió: > > - Can't type in text into the URL box and have it search google. > > I haven't found a solution for this one. For now I've been using google > as my home page. > It works for me. I don't have configure anything to do it :-( -- Angel L. Mateo Martínez Sección de Redes y Comunicaciones Area de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica_(___V Tfo: 968367590 Fax: 968363389 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Filtering IMAP messages in Evolution
Bijan Soleymani escribió: I'm having trouble filtering messages in evolution. I get my email through IMAP. I simply want to filter my messages, so that messages from various mailing lists go into appropriate folders. I set up a series of filters (if X-Mailing-List contain debian, etc.) but it seems that evolution doesn't ever run them. I have a similar behaviour. Although evolution filter some messages, others not. But, check that you have selected the option to filter messages in your IMAP inbox folder. At this moment, I don't have access to my computer, but I think it is under the receive options of your mail account's preferences. -- Angel L. Mateo Martínez Sección de Redes y Comunicaciones Area de Tecnologías de la Información_o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica _(___V Tfo: 968367590 Fax: 968363389 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Recommendation to Webmail (Python)
El jue, 19 de 06 de 2003 a las 11:24, Terence Ng escribió: > Hi! > > Does anyone have a favorite webmail system written in > Python that also fit in Debian? > My preferred webmail is Horde/IMP. It is based on PHP, not python :-( -- Angel L. Mateo Martínez Sección de Redes y Comunicaciones Area de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica_(___V Tfo: 968367590 Fax: 968363389 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
tool to monitor a hardware raid
Hello, I have installed woody in an IBM xSeries 335 server with a RAID controller. I have two disks configured as a mirror. Now I'm looking for a tool to monitor the mirror status (not the BIOS utility that the server has) from a command line interface. Another (not indispensable) feature would be to monitor it with SNMP. Any idea? -- Angel L. Mateo Martínez Sección de Telemática Area de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica_(___V Tfo: 968367590 Fax: 968398337 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Proftpd Configuration
El día Sun, 12 Jan 2003 19:02:56 +0100 "Willem-Jan Meijer" <[EMAIL PROTECTED]> escribió: > Hello, > > After an hardware-upgrade I formatted my debian-server and installed > it again. I forgot to backup some configuration files. Not a problem, > almost everything is running fine again but proftpd not yet. I've > searched google about it but in can't find the way it was. > > Wich lines are needed in the file that I can add an user (adduser) and > set his/her directory on the server. > > i.e: User A has a directory /var/www/user_a > Wich line I have to add to prftpd.conf to set that when he logs in by > ftp://62.163.158.122 he opens directory /var/www/user_a > Is /var/www/user_a the home directory of User A? -- Angel L. Mateo Martínez Sección de Redes y Comunicaciones Area de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica_(___V Tfo: 968367590 Fax: 968363389 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Fwd: getting postfix + sasl to work
El día Tue, 28 Jan 2003 08:08:26 -0800 Rupa Schomaker <[EMAIL PROTECTED]> escribió: > > Got it. Just reviewed the sasl documentation. The *only* way to > support CRAM-MD5 or DIGEST-MD5 (encrypted auth) is to use sasldb or > something called "auxprop" -- not sure how they are related. So, even > if you got saslauthd working (and the documentation is correct), it > will only support traditional (non encrypted) authentication. > I think you are wrong. I have postfix + sasl in a Solaris server (not chrooted) and I use CRAM-MD5 to authenticate via saslauthd. -- Angel L. Mateo Martínez Sección de Redes y Comunicaciones Area de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica_(___V Tfo: 968367590 Fax: 968363389 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Fwd: getting postfix + sasl to work
El día Wed, 29 Jan 2003 09:45:01 +0100 martin f krafft <[EMAIL PROTECTED]> escribió: > also sprach Angel L. Mateo <[EMAIL PROTECTED]> [2003.01.29.0909 +0100]: > > I think you are wrong. I have postfix + sasl in a Solaris server > > (not > > chrooted) and I use CRAM-MD5 to authenticate via saslauthd. > > can you share more information, like the configuration of saslauthd, > and how you configured postfix? and pam? > I dit it compiling all the software (postfix and sasl) from the source (postfix 1.1.11 and sasl 1.5.28, I think). I configure postfix to do authentication via saslauthd (in the smtpd.conf file). Then, the only I have to do is to run saslauthd before run postfix. I didn't need to configure anything more. With this configuration, I can authenticate with PLAIN, CRAM-MD5 and any other authentication mechanism that SASL supports (saslauthd is running as root). -- Angel L. Mateo Martínez Sección de Redes y Comunicaciones Area de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica_(___V Tfo: 968367590 Fax: 968363389 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]