A linux-uvc thread.
Hi, linux-uvc package is a kernel module for USB Video Class. It supports MacBook internal iSight camera, and some newer Logitec USB video devices. I'd like to consolidate the feedback I get about this package on this thread, to hopefully make finding them easier. At least, easier than having conversation in private email. If you have success/failure reports, please reply. Please Cc me if you want me to read your mail; I'm not subscribed to [EMAIL PROTECTED] regards, junichi -- [EMAIL PROTECTED],netfort.gr.jp} Debian Project -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: users getting confused between mailing lists and forums?
Hi, > On forums.debian.net, people should be redirected to [EMAIL PROTECTED] > when they don't get an answer there, because debian-user has more > 'powerusers' than forums.debian.net. The audiences of both support > resources are reasonably separate, because people tend to either swear > by forums, or by mailinglists, and not both. For the vast majority of > questions, that doesn't matter, because on both there are plenty of > people able answer the those most common type of questions. This is > about support questions, not about development -- which doesn't take > place at forums.debian.net. Hmm.. isn't it a solution to gate the discussion either way? Is it going to cause too much hassle? regards, junichi -- [EMAIL PROTECTED],netfort.gr.jp} Debian Project -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Debian and old EGCS compilers
On Tue, 14 May 2002 17:21:01 -0700 "John Richardson" <[EMAIL PROTECTED]> wrote: > I have a Debian system with gcc 2.95.4. However, I need egcs-2.91.66 (egcs > 1.1.2 release). There is a egcs 1.1.2 source package within Debian, under the name of egcs1.1 -- [EMAIL PROTECTED] http://www.netfort.gr.jp/~dancer -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: [WARNING] Broken libxml2 2.4.19-2 in unstable
> libxml2 2.4.19-2 in unstable is broken. In fact, it sounds like any package which was built against it might cause trouble with other version of libxml2. The change was reverted in 2.4.19-3, but please check if bug reports on pingus etc. are valid. The most important question is: do packages compiled against 2.4.19-2 run with 2.4.19-3 ? regards, junichi -- [EMAIL PROTECTED] : Junichi Uekawa http://www.netfort.gr.jp/~dancer GPG Fingerprint : 17D6 120E 4455 1832 9423 7447 3059 BF92 CD37 56F4 Libpkg-guide: http://www.netfort.gr.jp/~dancer/column/libpkg-guide/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: resource for woody freeze status?
Oliver Doepner <[EMAIL PROTECTED]> cum veritate scripsit: This mail didn't need to be Cc:'d to debian-devel. > is there any online resource that documents the (current) status of the > woody freeze process? debian-devel-announce mail log. > any comments are welcome to me. but please don't just say "when it's > ready." or "show me your code." or "woody/sid are even more stable than > most current commercial distros." that probbaly wouldn't solve the issue. No. See bugs.debian.org/release-critical and the graph somewhere in that page for your viewing pleasure. When the number of bugs goes down, it will be released. What's alarming is, that it is going down REAL FAST. We might even be able to release, at this rate. Interesting. regards, junichi -- [EMAIL PROTECTED] : Junichi Uekawa http://www.netfort.gr.jp/~dancer GPG Fingerprint : 17D6 120E 4455 1832 9423 7447 3059 BF92 CD37 56F4
Re: PROPOSED: new package: xinit
Daniel Burrows <[EMAIL PROTECTED]> immo vero scripsit > What about upgrades? Initial installs probably aren't a problem, but > people upgrading without metapackages will get xbase-clients and not xinit! > (thus preventing them from starting X at all, at least using the common > methods) I don't think people will get xbase-clients in the current situation. In my experience of upgrading several systems, upgrading from potato shall see most of X-related packages being removed, notably, "startx" goes missing. If we kept "task-x-window-system-core" package, that might have helped us upgrade (i am not sure), but we don't have such thing to keep our packages together, it seems. If you have any doubt, try: # pbuilder create --distribution potato --basetgz ~/base-potato.tgz # pbuilder login --basetgz ~/base-potato.tgz and install X, and upgrade to woody from there... (if you have the bandwidth etc.) Upgrading from potato with base and build-essential and task-x-window-system-core installed: For woody: bin/bash-2.03# apt-get dist-upgrade -s |more Reading Package Lists... Building Dependency Tree... The following packages will be REMOVED: console-tools task-x-window-system-core xbase-clients xfonts-100dpi xfonts-75dpi xfonts-base xfonts-scalable The following NEW packages will be installed: cpp-2.95 g++-2.95 gcc-2.95 ifupdown ipchains klogd libcap1 libdb3 libdps1 libfreetype6 libpcap0 libstdc++2.10-glibc2.2 libxaw6 libxaw7 net-tools netkit-inetd netkit-ping perl perl-modules xlibs The following packages have been kept back base-config console-data xserver-common xserver-svga 83 packages upgraded, 20 newly installed, 7 to remove and 4 not upgraded. For sid: bin/bash-2.03# apt-get dist-upgrade -s |more Reading Package Lists... Building Dependency Tree... The following packages will be REMOVED: console-tools task-x-window-system-core xbase-clients xfonts-100dpi xfonts-75dpi xfonts-base xfonts-scalable The following NEW packages will be installed: cpp-2.95 g++-2.95 gcc-2.95 ifupdown ipchains klogd libcap1 libdb3 libdps1 libfreetype6 libpcap0 libstdc++2.10-glibc2.2 libxaw6 libxaw7 net-tools netkit-inetd netkit-ping perl perl-modules xlibs The following packages have been kept back base-config console-data pcmcia-cs xserver-common xserver-svga regards, junichi -- [EMAIL PROTECTED] http://www.netfort.gr.jp/~dancer
Re: error related
"Vince Mulhollon" <[EMAIL PROTECTED]> immo vero scripsit > >> Unknown HZ value! (12) Assume 100. > >> Warning: /usr/src/linux/System.map has an incorrect kernel version. I'd ask, "how did you install your kernel?" regards, junichi -- [EMAIL PROTECTED] http://www.netfort.gr.jp/~dancer
Re: language settings in command line and man pages
In Fri, 23 Mar 2001 12:05:15 +0100 Peter cum veritate scripsit : The other question has been already answered, but for > 2) how to make man pages english? This can be done by doing man -L=C manpagename "-L=C" chooses the C locale. > I understand that I must read man pages to find out the answers, but > what if they all are in the language I don't understand? :) regards, junichi -- [EMAIL PROTECTED] : Junichi Uekawa http://www.netfort.gr.jp/~dancer GPG Fingerprint : 17D6 120E 4455 1832 9423 7447 3059 BF92 CD37 56F4
Re: parallel clusters of single cpu boxes
In Wed, 21 Mar 2001 02:53:55 Darryl cum veritate scripsit : You might be better off to ask this question in debian-beowulf@lists.debian.org List. Try the package mpich lam pvm etc. Details of how to set up is rather involved, but see the README.Debian files, and if there is anything unclear still, come back to debian-beowulf. > I am curious if anyone knows anything about clustering several single > cpu > boxes together and attempting to run a multi-cpu build of Linux on top > of > them. Has anyone figured out a way to thus put together a relatively > cheap > emulated parallel architecture? > > I have searched for info on this, but am not finding any. > > Regards, > > Darryl -- [EMAIL PROTECTED] : Junichi Uekawa http://www.netfort.gr.jp/~dancer GPG Fingerprint : 17D6 120E 4455 1832 9423 7447 3059 BF92 CD37 56F4
Re: Japanese in Emacs
In Sat, 10 Mar 2001 08:34:48 -0800 (PST) Matheson cum veritate scripsit : Hi, > I was wondering if it was possible to make it so that > when I type into emacs (emacs, or XEmacs) it would > convert the romaji to hiragana or katakana. Can Emacs > do this? Emacs can do everything can't it? I think what you are looking for is SKK. It is rather nontrivial to set things up tho. For something easier, get a -dl version of emacs, and install canna. -- [EMAIL PROTECTED] : Junichi Uekawa http://www.netfort.gr.jp/~dancer GPG Fingerprint : 17D6 120E 4455 1832 9423 7447 3059 BF92 CD37 56F4
Re: fvwm95 and icons
In Wed, 01 Mar 2000 15:56:02 +0100, de profundis Jose Alberto Lobo <[EMAIL PROTECTED]> cum veritas scribat lobo> Hi!, lobo> lobo> I run Debian slink and use fvwm95 window manager --I know it's a little lobo> primitive, but very robust and easy to handle. I have however a silly problem lobo> with the icons in the button bar: there are certain applications --netscape, lobo> xfig, xterm, etc.-- I launch by clicking on the corresponding button. While lobo> the corresponding program is loaded the button looks pressed, but one expects lobo> it to return to the original position on load finish. Some of the applications lobo> do show this behaviour, such as xterms, but others don't, such as netscape, xfig lobo> and others. With these the button remains in "pressed" state forever, even after lobo> exiting the associated program. It can be clicked on again, and the application lobo> restarts normally. lobo> lobo> Not very serious, indeed, but a bit of a nuisance to look at... lobo> lobo> Anybody any suggestions? *FvwmButtons Netscape nscape.xpm Exec "Netscape" netscape -geometry 621x700+0+0 *FvwmButtons command rterm.xpm Exec "XTerm" xterm -ut -rv -title EnglishTerminal& I have these settings, and I think they seem to work. The "Application name" part after Exec seems to be important. If you don't get it right, the button will look pressed all the time. I don't know what fvwm95 looks at for buttons, but I guess it is the window title, or something else, of the executed application. --- dancer, a.k.a. Junichi Uekawa Dept. of Knowledge Engineering and Computer Science, Doshisha University. ... Long Live Free Software, LIBERTAS OMNI VINCIT.
Re: Kitchen sink and Linux?
In Sun, 27 Feb 2000 00:00:35 +0530, de profundis "Chirag" <[EMAIL PROTECTED]> cum veritas scribat mannan1> Dear debian users Erm... that probably includes me. mannan1> Quoting from mannan1> http://www.calderasystems.com/support/docs/2.3/gsg/introduce.html mannan1> mannan1> Improved best-of-class package selection, with each Linux application mannan1> carefully chosen to be more useful and refined than the "everything but the mannan1> kitchen sink" products from some Linux packagers mannan1> mannan1> Unquote. I think that includes these ;) ~> dpkg -l 'xemacs20*' Desired=Unknown/Install/Remove/Purge | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ||/ NameVersionDescription +++-===-==- un xemacs20 (no description available) ii xemacs20-bin20.4-13Editor and kitchen sink -- support binaries pn xemacs20-mule(no description available) ii xemacs20-mule-c 20.4-13Editor and kitchen sink -- Mule binary compi pn xemacs20-nomule (no description available) ii xemacs20-suppor 20.4-13Editor and kitchen sink -- architecture inde ii xemacs20-suppor 20.4-13Editor and kitchen sink -- non-required libr Sure, debian includes the kitchen sink. I don't know if caldera includes these tho. ------- dancer, a.k.a. Junichi Uekawa Dept. of Knowledge Engineering and Computer Science, Doshisha University. ... Long Live Free Software, LIBERTAS OMNI VINCIT.
Re: Segmentation fault
On Mon, 14 Feb 2000 11:43:25 -0800, "davidturetsky" <[EMAIL PROTECTED]> was crying out from somewhere about: Re: Segmentation fault davidturetsky> I believe this is the code that was getting me into trouble, but it could be davidturetsky> elsewhere davidturetsky> davidturetsky> fscanf (file, "%s", Title); davidturetsky> fscanf (file, "%d %d %d %d %d %d", &m, &n, &it, <, &EQ, >); Probably, the input string was too long for the char* Title? I don't know. MSC seems to let the stack be destroyed quite quietly. It's a feature, methinks. Not too many segfaults when developing, but occasional BOD on using. davidturetsky> Thanks, dancer. BTW, what's wrong with your code sample? I can see this is davidturetsky> going to be daunting! davidturetsky> > For example, this code segfaults on Linux, which used to work perfectly davidturetsky> fine on MSC: davidturetsky> > davidturetsky> > char * bitsofmemory = malloc (BIG_SIZE); FILE*f =fopen(FILENAME, davidturetsky> ATTRIBUTE); davidturetsky> > if (!(bitsofmemory && f)) { davidturetsky> >free(bitsofmemory); fclose(f) /* try to clean up and it dies...*/ davidturetsky> >return ERROR; davidturetsky> > } It it meant to free up the allocated memory space and the file handle when either operation fails (a kind of expression found at the beginning of many functions). But one is trying to free up a NULL pointer, and that probably means read/write to a location where it is probably (or hopefully) not allocated to the program. Either the MS library checks for NULL every time it is called (I think that's kinda nice, but then, it is a waste), or NULL might be a place you can dump things on. One thing. To make it run on Linux, I had to change it to: davidturetsky> > if (!(bitsofmemory && f)) { davidturetsky> >if (bitsofmemory)free(bitsofmemory); if(f)fclose(f) /* try to clean up and it dies...*/ davidturetsky> >return ERROR; davidturetsky> > } --- dancer, a.k.a. Junichi Uekawa a member of the Dept. of Knowledge Engineering and Computer Science, Doshisha University. ... I pronounce "Linux" as in [Day-bee-enne]
Re: rebuild kernel and modules
On Mon, 14 Feb 2000 11:42:33 -0800, brian moore <[EMAIL PROTECTED]> was crying out from somewhere about: Re: rebuild kernel and modules bem> Indeed, after avoiding it for months, I finally actually built a kernel bem> 'the debian way' and found it a breeze. No more 'make bzImage && make bem> modules && make modules_install' and then digging the kernel out of bem> arch/i386/boot, etc. It just worked. bem> bem> I'll try to behave myself in the future and use make-kpkg on future bem> kernel builds. One more step towards a debian way would be doing : $ make xconfig $ fakeroot make-kpkg . $ sudo dpkg -i ../kernel. #by the way, you need to set up yourself as a sudoers, using visudo. #and need the packages fakeroot and sudo. and probably doing it in your $home directory. Whats more ... if, for example you do... (example session) $ mkdir for486 $ cd for486 $ tar xvIz ../linux-2.2.13.tar.bz2 $ cd linux $ make xconfig $ fakeroot make-kpkg --revision for486.1.0 binary-arch #note that you don't need to become root, or have any permission to become #one here... and copy the .deb file over to the machine, you can safely make a kernel for your 486 machine, without changing your main Pentium machine configuration. Finding this out after a long while of hacking around with the "Debian way", I thought this must make it into the FAQ. The FAQ doesn't say much about it (in slink). Kernel-package docs say a bit more. ----------- dancer, a.k.a. Junichi Uekawa a member of the Dept. of Knowledge Engineering and Computer Science, Doshisha University. ... I pronounce "Linux" as in [Day-bee-enne]
Re: Segmentation fault
On Sun, 13 Feb 2000 03:45:55 -0800, "davidturetsky" <[EMAIL PROTECTED]> was crying out from somewhere about: Re: Segmentation fault davidturetsky> It looks as though I was running into problems when trying to scan an input davidturetsky> file using c notation which is less efficient of memory, so I'm in the davidturetsky> process of revising all of the I/O to use c++ resources. Still, it comes as davidturetsky> a surprise, but I'm very early on the gcc learning curve Reading this I am wondering if you actually did allocate memory for the variables, or even did you do the right thing? for example, getting input for a double with scanf will require you doing something like double a; scanf("%g", &a); You can even do double a; scanf("%g", a); and it might still work on MS compiler, it won't on gcc. That was my personal experience migrating my own code. I found many invalid pointers in my code. MSC seems to be very "relaxed" in handling invalid pointers. Linux is very harsh and kills your app with a segfault as soon as you try to access it. For example, this code segfaults on Linux, which used to work perfectly fine on MSC: char * bitsofmemory = malloc (BIG_SIZE); FILE*f =fopen(FILENAME, ATTRIBUTE); if (!(bitsofmemory && f)) { free(bitsofmemory); fclose(f) /* try to clean up and it dies...*/ return ERROR; } --- Junichi Uekawa, a.k.a. dancer a member of the Dept. of Knowledge Engineering and Computer Science, Doshisha University. ... I pronounce "Linux" as [Day-bee-enne]
Re: Check This Out!
On Fri, 11 Feb 2000 09:33:03 +0100, Onno <[EMAIL PROTECTED]> was crying out from somewhere about: Re: Check This Out! Onno> > Onno> > [EMAIL PROTECTED]: Onno> >SMTP error from remote mailer after end of data: Onno> >host mx1.mail.yahoo.com [128.11.23.249]: Onno> >552 qdirdel.1 error 100:User is over the quota. You can try again later. Onno> Maybe donald19m now? Onno> Or is it the DoS attack they were talking about? ----------- Junichi Uekawa, a.k.a. dancer a member of the Dept. of Knowledge Engineering and Computer Science, Doshisha University. ... I pronounce "Linux" as [Day-bee-enne]
Re: pronunciation of daemon
On Thu, 10 Feb 2000 21:52:35 -0800 (PST), George Bonser <[EMAIL PROTECTED]> was crying out from somewhere about: Re: pronunciation of daemon grep> > can download the recording of him saying it from sunsite. grep> > The same applies to Linux. grep> grep> No, Hammish. I have heard Linus pronounce Linux several times from only a grep> few feet away. He has said it Lin-ux (lin-ucks) and sometimes lin-icks but grep> always with the short i sound, not the long e or long i whenever I have grep> heard him say it. I've listened to the wav file too, but in my country everyone says it is "rinakkusu" and it is spelled thus ;( ------- Junichi Uekawa, a.k.a. dancer a member of the Dept. of Knowledge Engineering and Computer Science, Doshisha University. ... I pronounce "Linux" as [Day-bee-enne]
Re: [*] about gcc
On Sun, 6 Feb 2000 13:55:08 -0600, Brad <[EMAIL PROTECTED]> was crying out from somewhere about: Re: [*] about gcc lists> On Mon, Feb 07, 2000 at 04:38:32AM +0900, Junichi Uekawa wrote: lists> > you need to do lists> > lists> > gcc -lm lists> > lists> > to link the maths library. lists> > lists> > Don't ask me why. lists> lists> Because the actual code for the sqrt function is in the math library, lists> and the math library isn't linked in by default. One thing I would really like to know is, why isn't it linked in by default? Well, it would make people realize that these functions actually reside in the libraries, and tells people of the use of -lm from the early stages. But, why isn't it, really, not linked in as default? ------- Junichi Uekawa, a.k.a. dancer a member of the Dept. of Knowledge Engineering and Computer Science, Doshisha University. ... I pronounce Linux as Day-bee-enne
Re: [*] about gcc
On 7 Feb 2000 01:09:00 +0800, [EMAIL PROTECTED] ([EMAIL PROTECTED]) was crying out from somewhere about: [*] about gcc maths> hello everybody: maths> maths> i am using debian 2.1r4, i install it use deselect's preselect "scientific maths> workstation". i found my gcc doesn't allow me to use "sqrt", for example: maths> maths> this is a c file: a.c maths> maths> #include "stdio.h" maths> #include "math.h" maths> main(){ maths> printf("%f\n",sqrt(2)); maths> } maths> maths> and execute "cc a.c" maths> maths> i get: maths> /tmp/ccc00242: In function 'main': maths> /tmp/ccc00242(.text+0xb): undefined reference to 'sqrt' maths> maths> so i had to use g++ instead, and it worked! maths> maths> i had use this gcc to campile some math software such as "pari", "simath","rlab"...and maths> it work very well, not any error reported. maths> maths> what is the problem? maths> you need to do gcc -lm to link the maths library. Don't ask me why. --- Junichi Uekawa, a.k.a. dancer a member of the Dept. of Knowledge Engineering and Computer Science, Doshisha University. ... I pronounce Linux as Day-bee-enne
Re: Debianのイ ンストールについて
Translation : he's installed debian on Toshiba 660 pro (notebook) with boot floppy (resc1440.bin), but it resets with the following message (unspecified) I think he should try "-safe" and "-tecra" versions of the floppy. ----------- Junichi Uekawa, a.k.a. dancer a member of the Dept. of Knowledge Engineering and Computer Science, Doshisha University. ... I pronounse Linux as Day-bee-enne On Sun, 6 Feb 2000 15:17:20 +0100 (CET), Ron Rademaker <[EMAIL PROTECTED]> was crying out from somewhere about: Re: Debianのインストールについて ron> Suggestion: Place your question in English in good old ASCII, that makes ron> it readable for most people! ron> ron> Ron ron> ron> == ron> ron>MAY THE SOURCE BE WITH YOU ron> ron> == ron> ron> On Sun, 6 Feb 2000, H. Shigematsu wrote: ron> ron> > 前略 ron> >既にメーリングリストに登録しましたので、質問をしても宜しいですか? ron> > confirm 22061618496594747790863 Hiromasa Shigematsu ron> > 若し、その他の手続きが必要ならば、連絡願います。 ron> > ron> > 質問事項: ron> > 東芝の660 proなるノートPCにLinuxをresc1440.binなるfloppy ron> > を使用してインストールしていますが。 ron> > 下記のメッセージが出てPCがresetされてしまいます。 ron> > 起動optionの指定で解決出来るのでしょうか? ron> > ron> > ron> > 以上 ron> > ron> > ron> > ron> > -- ron> > Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] < /dev/null ron> >
Re: HELP: FTP through squid proxy wants to get ENTIRE area under /
On Fri, 4 Feb 2000 17:27:00 -0800 (PST), [EMAIL PROTECTED] was crying out from somewhere about: HELP: FTP through squid proxy wants to get ENTIRE area under / You should try wget -r --no-parent ftp://. --- Junichi Uekawa, a.k.a. dancer a member of the Dept. of Knowledge Engineering and Computer Science Doshisha University. ... Trying to run Debian and trying to maintain it. ferret> ferret> It didn't do this to me with the previous set of images, but this go ferret> around I'm getting stuff outside the tree I specify: ferret> ferret> # wget -r ftp://marcus.debian.net/pub/debian/disks-sparc/2000-02-04/ ferret> ferret> ferret> ferret> # du ferret> ferret> 912 ./marcus.debian.net/pub/dce-patches ferret> 3 ./marcus.debian.net/pub/sxid/deb ferret> 4 ./marcus.debian.net/pub/sxid/old ferret> 18 ./marcus.debian.net/pub/sxid ferret> 48580 ./marcus.debian.net/pub ferret> 2 ./marcus.debian.net/bin ferret> 2 ./marcus.debian.net/etc ferret> 2 ./marcus.debian.net/lib ferret> ferret> I did move my proxy and modem to a different machine, but I copied ferret> /etc/squid.conf right over and initialised it, so that shouldn't be it. ferret> ferret> Suggestions?
Re: .gz in Netscape
My personal solution to this problem is to middle-click to open a new window, stop download, copy the address, paste it to xterm, type Ctrl-A then 'wget' :) But it's not that nice. ------- Junichi Uekawa, a.k.a. dancer a member of the Dept. of Knowledge Engineering and Computer Science Doshisha University. powered by Debian and pronounce Linux as Leenooks!! On Thu, 3 Feb 2000 12:20:11 -0600 (CST), Oleg Krivosheev <[EMAIL PROTECTED]> was crying out from somewhere about: Re: .gz in Netscape kriol> On Thu, 3 Feb 2000, paul wrote: kriol> kriol> > > On Thu, 3 Feb 2000, Oleg Krivosheev wrote: kriol> > > kriol> > > > looks like Netscape decompress the file while i'm doing kriol> > > > shift+b1. So instead of aaa.diff.gz i'm getting aaa.diff kriol> > > kriol> > > Actually, it doesn't decompress it strangely enough. It just removes the kriol> > > .gz extension. I've always experienced this. Bizzare. kriol> > > kriol> > > -- kriol> > I find this behavior rather odd, as my netscape 4.7 does not strip the .gz when I SHIFT-leftclick. Are you sure its not something in your settings? kriol> kriol> well, that was/is my question: what should i set/unset to get kriol> .gz downloading properly. Any ideas?
Re: problem with alien
twister> hi! twister> i'm using debian 2.1r2 "slink" and i wanted to install some programs from redhat 6.1 distribution... twister> i converted rpm file to deb format and i installed program (by dpkg -i deb_file)...when i try to execute it twister> i saw nice error "segmentation fault"... why ? twister> It's most probably because debian 2.1 uses glibc 2.0 version, and Red hat seems to use 2.1 for anything more than Red Hat version 6.0. Version of glibc seems rather important here. You should try to get one compiled for glibc2.0, or try getting glibc2.1 installed on your debian 2.1 (this is harder). Or you could try upgrading to debian 2.2 (potato) which is quite an adventure (still). ----------- Junichi Uekawa, a.k.a. dancer a member of the Dept. of Knowledge Engineering and Computer Science Doshisha University. powered by Debian and pronounce Linux as Leenooks!!
Re: Simulating viruses with wine (this is totally serious;-)
TassiloVP> something about wine. As a matter of fact I have two viruses stored as TassiloVP> files ( I did not run them though ;-) and I am rather curious to see TassiloVP> what they *would* do if I ran them. Is there perhaps a way of finding TassiloVP> out when running them with wine ? I guess this cannot damage anything TassiloVP> but perhaps I finally know what they were supposed to do. FYI. It's not a virus I tried to run, but running wine(991212) on slink, when I was checking if every program would run, iexplore.exe took a very long time to start up, and after it started, the files in c:/windows were changed so badly that when I started the dual boot in windows, I found a very very clean desktop. Has anyone experienced this? It could be due to my Japanese version of Windows, but I can't find a reason why iexplore.exe would want to change the filenames of directories for storing desktop and application things into $!$!$!$!.app and $!$!$!$!.dsk and that kind of thing. ----------- Junichi Uekawa, a.k.a. dancer a member of the Dept. of Knowledge Engineering and Computer Science Doshisha University. powered by Debian and pronounce Linux as Leenooks!!