Re: Lenny: which arch for a Intel Core 2 Duo?
Tzafrir Cohen ha scritto: > On Sat, Dec 20, 2008 at 07:45:20PM +0100, Mirto Silvio Busico wrote: > >> Hi all, >> >> my new notebook is an Acer AS5930G which uses an Intel Core 2 Duo cpu. >> >> I should like to install the 64 bit version of Lenny. >> >> Which is the correct arch for this processor? >> > > amd64 (a.k.a x86_64). Intel came later to that game and its processors > became generally compatible with the instruction set originated by AMD. > > Thanks a lot. So I have to suppose that there is a problem with the Lenny installer dated 15/DEC/2008 I'll try to download other CDs regards Mirto begin:vcard fn:Mirto Silvio Busico n:Busico;Mirto Silvio org:Busico Mirto Silvio adr:;;Via Casiglion De' Pepoli 84;Roma;RM;00127;Italia email;internet:m.bus...@ieee.org title:Dr. tel;work:+39 333 4562651 tel;cell:+39 333 4562651 x-mozilla-html:TRUE version:2.1 end:vcard
Lenny: which arch for a Intel Core 2 Duo?
Hi all, my new notebook is an Acer AS5930G which uses an Intel Core 2 Duo cpu. I should like to install the 64 bit version of Lenny. Which is the correct arch for this processor? Thanks Mirto P.S. from http://cdimage.debian.org/cdimage/weekly-builds/ I downloaded the amd64 kde CD But, during the installation all went wrong: * normal graphic intall loops trying to detect the keyboard * expert graphic install goes on until it reaches the disk partitioning, then freezes begin:vcard fn:Mirto Silvio Busico n:Busico;Mirto Silvio org:Busico Mirto Silvio adr:;;Via Casiglion De' Pepoli 84;Roma;RM;00127;Italia email;internet:m.bus...@ieee.org title:Dr. tel;work:+39 333 4562651 tel;cell:+39 333 4562651 x-mozilla-html:TRUE version:2.1 end:vcard
[SOLVED] Re: How to enable reading SNMP from the LAN in Lenny
Mirto Silvio Busico ha scritto: > Hi all, > > I'm trying to setup a lan monitoring system (zenoss) > Trying to enable SNMP in Lenny, I'm able to query the snmpd daemon only > on localhost. > > I tried to configure snmpd.conf file using the tutorial at > http://www.debianhelp.co.uk/snmp.htm > Then I tried the snmpconf utility. > > I always get the same behaviour: > > snmpwalk localhost -c public -v1 (works correctly and gives a lot of output) > > snmpwalk 192.168.32.161 -c public -v1 (gives the error "Timeout: No > Response from 192.168.32.161") > > The files /etc/hosts_allow and /etc/hosts_deny are empty > > What can I do? > > Thanks > Mirto > Replying to myself: There is a modificationo to do in the file /etc/default/snmpd -> temove "127.0.0.1" from the SNMPDOPTS line. Sloution found at: http://www.debuntu.org/how-to-monitor-your-servers-with-snmp-and-cacti Citation: 1.2. Configuring SNMPD The first thing we want to make sure is that snmpd is only going to wait for connections on localhost. To do this, edit file /etc/default/snmpd and make sure those values are set: SNMPDRUN=yes SNMPDOPTS='-Lsd -Lf /dev/null -u snmp -I -smux -p /var/run/snmpd.pid 127.0.0.1' If you want your server to listen on all interfaces, remove the /127.0.0.1/ bit. This setting will make sure that the service will be started and that the service is going to bind to localhost. Regards Mirto begin:vcard fn:Mirto Silvio Busico n:Busico;Mirto Silvio org:Busico Mirto Silvio adr:;;Via Casiglion De' Pepoli 84;Roma;RM;00127;Italia email;internet:[EMAIL PROTECTED] title:Dr. tel;work:+39 333 4562651 tel;cell:+39 333 4562651 x-mozilla-html:TRUE version:2.1 end:vcard
How to enable reading SNMP from the LAN in Lenny
Hi all, I'm trying to setup a lan monitoring system (zenoss) Trying to enable SNMP in Lenny, I'm able to query the snmpd daemon only on localhost. I tried to configure snmpd.conf file using the tutorial at http://www.debianhelp.co.uk/snmp.htm Then I tried the snmpconf utility. I always get the same behaviour: snmpwalk localhost -c public -v1 (works correctly and gives a lot of output) snmpwalk 192.168.32.161 -c public -v1 (gives the error "Timeout: No Response from 192.168.32.161") The files /etc/hosts_allow and /etc/hosts_deny are empty What can I do? Thanks Mirto begin:vcard fn:Mirto Silvio Busico n:Busico;Mirto Silvio email;internet:[EMAIL PROTECTED] tel;work:333 4562651 tel;cell:333 4562651 x-mozilla-html:TRUE version:2.1 end:vcard
Lenny: configure ocsinventory fails
Hi all, I'm trying to install and configure ocsinventory on a fresh lenny install. First attempt failed because mysql is a requirement but it is not in the dependencies. Starting again from scratch, installing mysql, an then trying to install ocs inventory seems to work: it asks for the administrative password of mysql; asks for the password for ocsinventory; creates the "ocs" mysql user and the ocsweb mysql schema. But no tables are generated and using the URL "http://localhost/ocsinventory"; gives a "Bad Request" error" In the Apache2 log files I see an "Table 'ocsweb.config' doesn't exist" Anyone was able to install and start ocs inventory? There are postinstallation procedures to execute? (in the README.debian there is nothing useful) Thanks Mirto -- _ Busico Mirto Silvio Consulente ICT cell. 333 4562651 email [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Lenny Kernel 2.6.26-1-686 - m-a doesn't compile open-vm-source
Eugene V. Lyubimkin ha scritto: Mirto Silvio Busico wrote: Hi all, I'm trying to install open-vm-source in a fresh Lenny install. m-a prepare says that everything is ok but the command m-a a-i open-vm fails in building the os.c module The error says: 533: error: 'struct proc_dir_entry' has no member named 'get_info' With the 2.6.25 kernel alll worked fine. Any hint? Thanks Mirto Try open-vm-source from unstable. If got the same, file the bug. Yes. Taking the Sid version cures the problem. Thanks Mirto -- _ Busico Mirto Silvio Consulente ICT cell. 333 4562651 email [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Lenny Kernel 2.6.26-1-686 - m-a doesn't compile open-vm-source
Hi all, I'm trying to install open-vm-source in a fresh Lenny install. m-a prepare says that everything is ok but the command m-a a-i open-vm fails in building the os.c module The error says: 533: error: 'struct proc_dir_entry' has no member named 'get_info' With the 2.6.25 kernel alll worked fine. Any hint? Thanks Mirto -- _ Busico Mirto Silvio Consulente ICT cell. 333 4562651 email [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Tellico: italian data sources?
Hi all, anyone knows data sources for the italian language? The only one defined ( Internet Bookshop (ibs.it) ) seems not to work. Thanks Mirto -- _ Busico Mirto Silvio Consulente ICT cell. 333 4562651 email [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Lenny doesn't recognize virtual disks on a Vmware ESX 3.0 virtual machine.
Hi all, the problem is in the 2.6.22 kernel. I installed etch on an ESX 3.0 Vmware virlual machine (it uses 2.6.18 kernel) and all works fine. Then I upgraded from etch to lenny (it uses 2.6.22 kernel) after the reboot the hard disks are not recognized and the boot halts waiting for root file system to be mounted. If I start with the old kernel it works again. I have to do dist-upgrade from time to time and throwing away new kernel is annoying. How can I solve this problem? Thanks Mirto Mirto Silvio Busico ha scritto: > Hi all, > > I have a virtual machine on an ESX 3.0 server. > I installed etch on this machine, but upgrading to lenny gives apt errors. > > Si I tried to install afresh lenny. > When the installation arrives to "hard disk detection" it says "no hard > disk found" and tisplays a list of scsi adapters. > > I've tried the Lenny DVD and also the netinst CD (downloaded the 20 Nov > 2007 version): always the same error. > > Any hint? > > Thanks > Mirto > > -- __ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Lenny doesn't recognize virtual disks on a Vmware ESX 3.0 virtual machine.
Hi all, I have a virtual machine on an ESX 3.0 server. I installed etch on this machine, but upgrading to lenny gives apt errors. Si I tried to install afresh lenny. When the installation arrives to "hard disk detection" it says "no hard disk found" and tisplays a list of scsi adapters. I've tried the Lenny DVD and also the netinst CD (downloaded the 20 Nov 2007 version): always the same error. Any hint? Thanks Mirto -- __________ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
IceDove freezes when receivin messages from MUTT
Hi all, I have a strange behaviour in Icedove. I have Lenny updated today. It was sice last month that receiving some messages in the deban lists, when I selec the message, it appears in the preview panel but Icedove freezes. I have to stop and restart icedove; then selecting the message with the rigth mouse button and deeting the message solves the freezing. One of these messages is attached here. I was able to see the source of the message but I cannot see anything strange. Anyone experienced this problem? Thanks Mirto It was [Fwd: Re: linux-sound-base requires udev!] -- __ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 --- Begin Message --- --- End Message ---
Re: LVM
Yuriy Padlyak ha scritto: > ok, but I don't know how to move ext3 file system or it's content > without loosing any file attributes, etc either :) > > Could you help me please? Why not use "rsync"? Just my 2 cents Mirto > > Thank you in advance > > Tyler MacDonald wrote: >> Yuriy Padlyak <[EMAIL PROTECTED]> wrote: >>> Hi guys, >>> >>> Wondering how to move Logical volume to other Volume Group. Can't >>> find any >>> LVM command for this purpose >> >> You'd create a new logical volume in the other volume group, copy >> the data >> over manually, and delete the old logical volume. >> >> Cheers, >> Tyler > > -- __ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
zope2.10-sandbox doesn't configure in Lenny
Hi all, I'm trying to install zope2.10-sandbox 2.10.4-2 on Lenny When I try an apt-get install I see the error: "dzhandle make-instance: service user must be specified as user:group" and no sandbox instance is created. What can I do? Thanks Mirto P.S. here is the apt-get output: === msb01:~# apt-get install zope2.10-sandbox Lettura della lista dei pacchetti in corso... Fatto Generazione dell'albero delle dipendenze in corso Reading state information... Fatto The following packages were automatically installed and are no longer required: apache-common libnss-ldap python2.5 python2.5-minimal python-egenix-mxdatetime libpam-ldap python-egenix-mxtools Use 'apt-get autoremove' to remove them. Pacchetti suggeriti: zope-book zope-devguide I seguenti pacchetti NUOVI (NEW) saranno installati: zope2.10-sandbox 0 aggiornati, 1 installati, 0 da rimuovere e 135 non aggiornati. È necessario prendere 0B/178kB di archivi. Dopo l'estrazione, verranno occupati 311kB di spazio su disco. Preconfigurazione dei pacchetti in corso Selezionato il pacchetto zope2.10-sandbox, che non lo era. (Lettura del database ... 239557 file e directory attualmente installati.) Spacchetto zope2.10-sandbox (da .../zope2.10-sandbox_2.10.4-2_all.deb) ... Configuro zope2.10-sandbox (2.10.4-2) ... dzhandle make-instance: service user must be specified as user:group msb01:~# === -- __________ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651
Portable Debian?
Hi all, I need to create a portable Debian (or derivate) system. My needs are: * install the system on a bootable USB HD * install a system that autoconfigure on different hardware (I don't know in advance which video card or lan card I'll find when I'll use the system) * the system is mostly used for openoffice presentations and I prefer kde I have to go around doing presentations and FOSS demonstrations. Anyone have experience about this? There is any Debian derivate that can be used? (Knoppix, Kanotix...)? There is sonething like Mandriva Flash (http://www.mandriva.com/en/linux/2007/node_3481) besd on debian? Any help will be greately appreciated. Mirto -- ______ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: How to print on an HP Color Laserjet 2600n (ZJSream protocol) [SOLVED]
Andrew Sackville-West ha scritto: > On Tue, Feb 27, 2007 at 08:26:13AM +0100, Mirto Silvio Busico wrote: > >> Hi all. >> >> I need to print on an HP Color Laserjet 2600n >> >> Searching for this model showed that this strange print shoud be a >> winpriter using the ZIStram protocol. >> >> I tried different drivers (the hp 2600n, the 2 generic zjstream drivers) >> with no luck. >> >> On this site http://foo2hp.rkkda.com/ it is explictly said to not use >> the Debian drivers. >> >> > > So, have you tried the debian drivers? I mean, I know upstream said to > not use them, but they give no explanation and it would certainly be > worth a shot. > > A > Tryed: they don't work The drivers from http://foo2hp.rkkda.com/ works correctly. Regards Mirto -- __ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: How to print on an HP Color Laserjet 2600n (ZJSream protocol)
Виталий Ищенко ha scritto: > http://foo2hp.rkkda.com/ > > There is a debian package for the driver, but official site contains > following warning: > *** DON'T USE the foo2zjs package from Ubuntu, SUSE, > Mandrake/Manrivia, Debian, RedHat, or Gentoo! > *** Download it here and follow the directions below. > > :) I know. But the instructions are for all Linux excluded Debian and only Gnome interface. For now in Etch/Kde this driver prints only blank pages and the printer displays an "page too complex error" Any hint? Mirto -- __________ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651
Re: Try the printing info at...
pinniped ha scritto: > > http://www.linuxprinting.org/show_printer.cgi?recnum=HP-Color_LaserJet_2600n > Alredy seen. The driver page points to http://foo2hp.rkkda.com/ For now I'm able to setup the driver but it prints only blank pages and the printer gives the error "page too complex" > > Personally I would not buy a (contemporary) color printer under about > US$2000 - in my opinion they are never worth the money. Until > recently I would never have bought a monotone laser printer for under > $600 - but there seem to be good ones now for about $400. On the > other hand, I'm much more choosy than most people because I'm pretty > serious about the print quality on documents I produce. > > > Yes of course you ar rigth. But I am a consultant and I have to use the printers I find in my customer office. thanks Mirto -- ______ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
How to print on an HP Color Laserjet 2600n (ZJSream protocol)
Hi all. I need to print on an HP Color Laserjet 2600n Searching for this model showed that this strange print shoud be a winpriter using the ZIStram protocol. I tried different drivers (the hp 2600n, the 2 generic zjstream drivers) with no luck. On this site http://foo2hp.rkkda.com/ it is explictly said to not use the Debian drivers. Anyone was able to print to this strange thing? If yes, can send me the instructions? Thanks Mirto -- __ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: etch no wifi with ipw2200
Joey Hess ha scritto: > Mirto Silvio Busico wrote: > >> The wifi network card is an intle pro and the ipw2200 module is >> installed correctly (I can see it in lsmod) >> >> I've added in interfaces all the possible iface (eth0 eth1 eth2 ath0 wlan0) >> >> No one worked. >> >> >> On the same machine, if I boot with a Kubuntu live, the wifi card works >> perfectly. >> The module loaded is ipw2200 >> The card shown in ifconfig is eth1 (in Etch eth1 is the standard lan card) >> >> >> What can I do to activate wifi? >> > > ipw2200 needs firmware, which is available from > http://ipw2200.sourceforge.net/firmware.php > > (As a general rule any time a network or especially wireless device > doesn't work, go looking for the firmware). > > This worked. Downloaded the firmware in the directory /lib/firmware and all went ok Thanks for the help Mirto -- __ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: etch no wifi with ipw2200
Adrian Chapela ha scritto: > Mirto Silvio Busico escribió: >> Hi all, >> I'm trying to setup a wifi connection on Etch. >> >> The wifi network card is an intle pro and the ipw2200 module is >> installed correctly (I can see it in lsmod) >> >> I've added in interfaces all the possible iface (eth0 eth1 eth2 ath0 >> wlan0) >> >> No one worked. >> >> >> On the same machine, if I boot with a Kubuntu live, the wifi card works >> perfectly. >> The module loaded is ipw2200 >> The card shown in ifconfig is eth1 (in Etch eth1 is the standard lan >> card) >> >> >> What can I do to activate wifi? >> >> >> Thanks >> Mirto >> >> > Can you execute iwconfig ?? > > Your problem could be the radio off of the card. To activate the radio > compile the acerhk driver and find the correct option to enable the > radio and the led of your laptop. > > Thanks for the help. Problem solved. Regards Mirto -- __ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651
Re: etch no wifi with ipw2200
Joey Hess ha scritto: > Mirto Silvio Busico wrote: > >> The wifi network card is an intle pro and the ipw2200 module is >> installed correctly (I can see it in lsmod) >> >> I've added in interfaces all the possible iface (eth0 eth1 eth2 ath0 wlan0) >> >> No one worked. >> >> >> On the same machine, if I boot with a Kubuntu live, the wifi card works >> perfectly. >> The module loaded is ipw2200 >> The card shown in ifconfig is eth1 (in Etch eth1 is the standard lan card) >> >> >> What can I do to activate wifi? >> > > ipw2200 needs firmware, which is available from > http://ipw2200.sourceforge.net/firmware.php > > (As a general rule any time a network or especially wireless device > doesn't work, go looking for the firmware). > > I'm a little confused. In my mind, loading (or upgrading) firmware in a device mean writinig into the device something. When loaded or upgraded the firmware stays into the device also if you power off and on again the device. If this is correct, the sequence I used: boot Etch: no wifi boot Kubuntu: wifi works (so I suppose, if the firmware is needed the firmware id loaded) boot Etch: no wifi (and where has gone the firmware?) should resolve any firmware problem Can you explain more? Thamnks Mirto -- __ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
etch no wifi with ipw2200
Hi all, I'm trying to setup a wifi connection on Etch. The wifi network card is an intle pro and the ipw2200 module is installed correctly (I can see it in lsmod) I've added in interfaces all the possible iface (eth0 eth1 eth2 ath0 wlan0) No one worked. On the same machine, if I boot with a Kubuntu live, the wifi card works perfectly. The module loaded is ipw2200 The card shown in ifconfig is eth1 (in Etch eth1 is the standard lan card) What can I do to activate wifi? Thanks Mirto -- ______ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Where can I find VDE documentation?
Hi all, I need to find a detailed documenteation about setting up networks using the Virtual Distribuited Ethernet. Can anyone point me in the right direction? Until now no luck with: debian package documentation debian reference googling around This is because I'm trying to setup a Qemu virtual machine with two network cards; but so far I was unsuccessful. Qemu is ok; ifconfig in the virtual machine seems ok The real machine seems ok with two TAP interfaces. Qemu is started with the command: == vdeq qemu -m 256 -net nic,vlan=1,macaddr=52:54:00:12:03:00 -net vde,vlan=1,sock=/var/run/vde2/tap1.ctl -net nic,vlan=1,macaddr=52:54:00:12:04:00 -net vde,vlan=1,sock=/var/run/vde2/tap2.ctl -boot c -hda '/Qemu/etch/disk1' & == Regards Mirto -- ______ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651
Re: Setting network cards to full duplex at boot...
Andrei Popescu ha scritto:
> On Wed, Dec 13, 2006 at 08:08:57PM +1300, Simon wrote:
>
>> Hi There,
>>
>> Is there a way to set network cards to full duplex at boot time?
>>
>> Thanks Simon
>>
>
> Mine is set that way automatically. It would be helpful if you would
> specify which card and chipset, Debian release, kernel version, ...
>
> Regards,
> Andrei
>
Well, I have a switch that doesn' t work well with negotiation. So I
added these MII lines in /etc/init.d/networking (in the start section):
==
start)
process_options
log_action_begin_msg "Configuring network interfaces"
if ifup -a; then
log_action_end_msg $?
else
log_action_end_msg $?
fi
/sbin/mii-tool -F 100BaseTx-HD eth0
/sbin/mii-tool -v eth0
;;
==
These have to be done for every network card (HD stays for Half Duplex,
you need FD - Full Duplex - see the mii-tool manual).
For me this works.
Regards
Mirto
--
__
Mirto Silvio Busico ICT Consultant
Tel. +39 333 4562651
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: starting qemu: shm problem
Bill Marcum wrote:
> On Fri, Nov 24, 2006 at 12:05:06PM +0100, Mirto Silvio Busico wrote:
>
>> Hi all,
>> I'm trying to star qemu but I have problems.
>>
>> I'm using Etch and qemu 0.8.1-1
>>
>> When I try to start I receive an error message stating that I have not
>> enough shared memory.
>>
>> the mount command says:
>> devshm on /dev/shm type tmpfs (rw)
>>
>> If I do what qemu suggest:
>> umount /dev/shm
>> mount -t tmpfs -o size=144m none /dev/shm
>>
>> the emulation starts correcty
>>
>> Here my questions:
>>
>>1. is this the expected behaviour?
>>2. where can I find documentation about shm device and temporary file
>> systems?
>>
>
> For a start, you can read the comments in /etc/init.d/mountvirtfs
>
Well, in my /etc/init.d/ directory there is no such file.
A grep of shm in this directory says:
=
msb01:/etc/init.d# grep shm *
checkroot.sh: domount tmpfs shmfs /tmp \
mountdevsubfs.sh: # Mount a tmpfs on /dev/shm
mountdevsubfs.sh: domount tmpfs shmfs /dev/shm
-onoexec,nosuid,nodev$SHM_OPT
mtab.sh:# /dev/pts and /dev/shm.
mtab.sh:domtab tmpfs /dev/shm "devshm" $SHM_OPT
udev: if mountpoint -q /dev/shm/; then
udev:umount -n -l /dev/shm/
umountfs: /|/proc|/dev|/.dev|/dev/pts|/dev/shm|/proc/*|/sys)
umountnfs.sh: /|/proc|/dev|/dev/pts|/dev/shm|/proc/*|/sys)
msb01:/etc/init.d#
=
So, looking at mountdevsubfs.sh (there is no great comment inside) I see:
=
TMPFS_SIZE=
[ -f /etc/default/tmpfs ] && . /etc/default/tmpfs
KERNEL="$(uname -s)"
. /lib/lsb/init-functions
. /lib/init/mount-functions.sh
do_start () {
#
# Mount a tmpfs on /dev/shm
#
SHM_OPT=
[ "${SHM_SIZE:=$TMPFS_SIZE}" ] && SHM_OPT=",size=$SHM_SIZE"
domount tmpfs shmfs /dev/shm -onoexec,nosuid,nodev$SHM_OPT
=
Looking at /etc/default/tmpfs I find a file containing:
=
# SHM_SIZE sets the maximum size (in bytes) that the /dev/shm tmpfs can use.
# If this is not set then the size defaults to the value of TMPFS_SIZE
# if that is set; otherwise to the kernel's default.
#
# The size will be rounded down to a multiple of the page size, 4096 bytes.
SHM_SIZE=
=
That explains the size determination.
>
>>3. how can I change the shm device?
>>
>>
> Create an /etc/default/tmpfs containing the line
> TMPFS_SIZE=144M
>
> The default size is half of available memory, so I suppose your system
> has 256M or less?
>
Yes it have 256Mb
Thanks for your help
Mirto
>
>
--
__
Mirto Silvio Busico ICT Consultant
Tel. +39 333 4562651
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
starting qemu: shm problem
Hi all, I'm trying to star qemu but I have problems. I'm using Etch and qemu 0.8.1-1 When I try to start I receive an error message stating that I have not enough shared memory. the mount command says: devshm on /dev/shm type tmpfs (rw) If I do what qemu suggest: umount /dev/shm mount -t tmpfs -o size=144m none /dev/shm the emulation starts correcty Here my questions: 1. is this the expected behaviour? 2. where can I find documentation about shm device and temporary file systems? 3. how can I change the shm device? Thanks Mirto -- ______ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Which firewall?
Jerome BENOIT wrote: > Hi, > > what about firehol ? Why not? Can you recommend this? In the past I used Turtle firewall ( http://www.turtlefirewall.com/index.en.html ) - a wabmin module. But in Debian webmin and its modules were abandoned because changing too fast. So I'm looking to a firewall that is known/ recommended/ supported by the Debia community. Mirto > > Mirto Silvio Busico wrote: >> Hi all, >> I have to setup a firewall for a little network. >> The firewall machine will have multiple ip addresses for a physical lan >> card (eth0 eth0:1 eth0:2). >> >> Looking to the packages (for Etch) I see some firewall; so there is the >> question: >> Can anyone recommend to use (or to avoid) any of the following? >> >> fireflyer >> fwbuilder >> kmyfirewall >> shorewall >> >> Any information will be greately appreciated. >> >> Mirto >> >> > -- __ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Which firewall?
Hi all, I have to setup a firewall for a little network. The firewall machine will have multiple ip addresses for a physical lan card (eth0 eth0:1 eth0:2). Looking to the packages (for Etch) I see some firewall; so there is the question: Can anyone recommend to use (or to avoid) any of the following? fireflyer fwbuilder kmyfirewall shorewall Any information will be greately appreciated. Mirto -- __ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: public key warning
M-L wrote: > On Wednesday 22 November 2006 15:08, Mark Grieveson wrote: > >> Hello. After a recent upgrade of my Etch, I get the following warning: >> >> Fetched 30.2kB in 9s (3350B/s) >> Reading package lists... Done >> W: There are no public key available for the following key IDs: >> A70DAF536070D3A1 >> W: You may want to run apt-get update to correct these problems >> >> What does this mean? Should I be concerned? Is anyone else receiving >> this warning? >> >> Thanks, >> >> Mark >> > > I am, and assumed that there was just a glitch with one of the packages > signings, or someones ID key being out of date, changed or something similar? > > But that could be very wrong. > > Be well, > Charlie > > Confirmed. I also get this message on a fresh (DVD of 4 Nov 2006) installed etch and a dist-upgrade Mirto -- __ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Etch: Kcontrol not working: it is empty
cothrige wrote: > Just in case it is relevant, I tried opening it from a terminal and > this was printed: > > kcontrol: WARNING: No K menu group with X-KDE-BaseGroup=settings found > ! Defaulting to Settings/ > > Not sure how to correct that. > > Patrick > > I suppose that something is changing in the menu structure. Hope we see a new release correcting the problem Mirto -- __________ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Etch: Kcontrol not working: it is empty
Hi all, I've just setup a new machine wigth Etch weekly build of 9 Nov 2006. When I start Kcontrol it starts but shows an empty selction panel on the left; so it is unusable. Anyone is experiencing this bheaviour? BTW mi installation steps where: installed a base system + desktop (it comes with Gnome) from a console "apt-get install kde kdm" selected kdm as display manager select kde as default session My other machine, using an Etch normally upgraded works correctly. Any hint? Regards Mirto -- ______ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
(SOLVED) Re: Etch and Kde PDF printer
Florian Kulzer wrote: > On Fri, Nov 10, 2006 at 13:10:02 +0100, Mirto Silvio Busico wrote: > >> Hi all, >> >> I'm not able to use the virtual printers defined in Kde. >> >> Going to the control center -> devices -> printers if I select the >> predefined pdf printer and I click on the "print test page" button, I >> obtain a CUPS error. >> >> In my understanding the virtual printer should invoke ghostscript asking >> for generating a file without calling the cups system. >> >> How can I setup a virtual printer generating a PDF file in Kde? >> > > Try to PDF-print something other than the test page. The test page seems > to be broken for PDF/file and PS/file (it sends an invalid printer > specification to CUPS), but printing other documents to a PDF works for > me with kdeprint 4:3.5.5a.dfsg.1-1. (Actually I had not even noticed the > problem with the test button until I saw your email and tried it.) > > Fantastic! It works correctly Thanks a lot Mirto -- __ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Etch and Kde PDF printer
Hi all, I'm not able to use the virtual printers defined in Kde. Going to the control center -> devices -> printers if I select the predefined pdf printer and I click on the "print test page" button, I obtain a CUPS error. In my understanding the virtual printer should invoke ghostscript asking for generating a file without calling the cups system. How cai I setup a virtual printer generating a PDF file in Kde? Thanks Mirto -- __________ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
today etch upgrade: kdesu don't work
He all, I've jus updraded etch today. Now, after a reboot, kdesu no more works: the dialog is shown but the root password is not accepted. It reporta a wrong password. If I use a terminal the su command works fine, so I'm sure that the root password is correct. Anyone is experiencing the same problem? There ia a solution? Thanks Mirto -- ______ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: How to PIN a package?
Florian Kulzer wrote: [...snip] >>> I had to downgrade openoffice to version 2.0.3. >>> Now I need to avoid that this package will b e upgraded again. >>> >>> Following the manuals I put in apt files (in /etc/apt): >>> >>> apt.conf: >>> >>> APT::Authentication::TrustCDROM "true"; >>> AcquireProxy "false"; >>> APT::Default-Release "testing"; >>> >>> >>> >>> preferences: >>> >>> >>> Package: openoffice.org* >>> Pin: version 2.0.3* >>> Pin-Priority: 10001 >>> > > Maybe the APT::Default-Release "testing"; option interferes with the > package pinning or the wildcards in the preferences file do not work as > expected. What is the output of > > apt-cache policy openoffice.org > Output is: msb01:/# apt-cache policy openoffice.org openoffice.org: Installato: 2.0.3-6 Candidato: 2.0.3-6 Pin del pacchetto: 2.0.3-6 Tabella versione: 2.0.4~rc3-1 1001 990 http://mi.mirror.garr.it etch/main Packages *** 2.0.3-6 1001 50 http://snapshot.debian.net unstable/main Packages 100 /var/lib/dpkg/status msb01:/# > apt-cache policy openoffice.org-common > Output is: openoffice.org-common: Installato: 2.0.3-6 Candidato: 2.0.4~rc3-1 Tabella versione: 2.0.4~rc3-1 0 990 http://mi.mirror.garr.it etch/main Packages *** 2.0.3-6 0 50 http://snapshot.debian.net unstable/main Packages 100 /var/lib/dpkg/status msb01:/# I don't understand why the preference with 10001 value is not considered. Regards Mirto -- __ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: How to PIN a package?
Hi all,
I didn't get any answer.
Is it a really stupid question? (or I missed the replay?)
Please help me: I need to PIN a package, but the documentation doesn't help.
Regards
Mirto
Mirto Silvio Busico wrote:
> Hi all,
> I had to downgrade openoffice to version 2.0.3.
> Now I need to avoid that this package will b e upgraded again.
>
> Following the manuals I put in apt files (in /etc/apt):
>
> apt.conf:
>
> APT::Authentication::TrustCDROM "true";
> AcquireProxy "false";
> APT::Default-Release "testing";
>
>
>
> preferences:
>
>
> Package: openoffice.org*
> Pin: version 2.0.3*
> Pin-Priority: 10001
>
>
>
>
> But apt-get update; apt-get -s dist-upgrade tell me that apt still want
> to upgrade openoffice to the 2.0.4~rc3-1 version.
>
> What I'm doing wrong, or what is missing?
>
> Mirto
>
>
--
__
Mirto Silvio Busico ICT Consultant
Tel. +39 333 4562651
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
How to PIN a package?
Hi all, I had to downgrade openoffice to version 2.0.3. Now I need to avoid that this package will b e upgraded again. Following the manuals I put in apt files (in /etc/apt): apt.conf: APT::Authentication::TrustCDROM "true"; AcquireProxy "false"; APT::Default-Release "testing"; preferences: Package: openoffice.org* Pin: version 2.0.3* Pin-Priority: 10001 But apt-get update; apt-get -s dist-upgrade tell me that apt still want to upgrade openoffice to the 2.0.4~rc3-1 version. What I'm doing wrong, or what is missing? Mirto -- __________ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Etch and openoffice: how to downgrade
Thanks a lot. I need some other help. Brad Sawatzky wrote: > On Thu, 12 Oct 2006, Mirto Silvio Busico wrote: > > >> I need to downgrade OO from 2.0.4 rc 3-1 to 2.0.3. >> How can I do this? >> >> If you ask why, because oo impress chrashes when you try to add 2 >> clipart from gallery (I've sent a message to the package mantainers) >> > > With luck it is as simple as (for example): > sudo dpkg -i /var/cache/apt/archives/openoffice.org-impress_2.0.3-6.deb > > That just installs the old version of OOimpress and leaves the rest of OO > alone. If I'm reading the 'Depends:' for 2.0.3-6 correctly, that should > work. YMMV. > Sorry to say that there are only the 2.04 versions > This also requires you to have the old version in your apt cache. If you > don't you should be able to download it from <http://snapshot.debian.net>. > I'm a little confused here. I was not able to download the package from there. I found, searching openoffice these 2 lines deb http://snapshot.debian.net/archive pool openoffice.org deb-src http://snapshot.debian.net/archive pool openoffice.org I added to sources.list and tried dpkg and apt-get but they say that there is no package named openoffice.org-impress_2.0.3-6 Mybe I'm doing something wrong There is any kind of information on how to use snapshot.debian.net? > -- Brad > > > Mirto -- __ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Etch and openoffice: how to downgrade
Hi all, I need to downgrade OO from 2.0.4 rc 3-1 to 2.0.3. How can I do this? If you ask why, because oo impress chrashes when you try to add 2 clipart from gallery (I've sent a message to the package mantainers) Regards Mirto -- __ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Debian doesn't install on IBM Tink Pad R52
Mohsen Pahlevanzadeh wrote: > Mirto Silvio Busico wrote: > >> Hi all, >> I have to install Debian on a notebook: IBM/Lenovo ThinkPad R52 sub >> 1846. >> >> All I've tried filed. >> >> With Etch: >> sata hd recognized >> dvd recorder not recognized (tied to install with an external usb >> dvd reader) >> istallation starts >> dhcp works >> istallation is stalled and the machine doesn'work anymore >> >> With Sarge (3.1 r 3): >> dvd recognized >> sata hd not recognized >> dhcp doesnt work >> >> What can I do to install any Debian version? >> >> Anyoune installed Debian on this kind of machine? >> >> Regards >> Mirto >> >> >> >> >> > You can use testing version of that. > I supposed testing = Etch. If so, it doesn't work Mirto -- __ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Debian doesn't install on IBM Tink Pad R52
Hi all, I have to install Debian on a notebook: IBM/Lenovo ThinkPad R52 sub 1846. All I've tried filed. With Etch: sata hd recognized dvd recorder not recognized (tied to install with an external usb dvd reader) istallation starts dhcp works istallation is stalled and the machine doesn'work anymore With Sarge (3.1 r 3): dvd recognized sata hd not recognized dhcp doesnt work What can I do to install any Debian version? Anyoune installed Debian on this kind of machine? Regards Mirto -- ______ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Using wine w/ Lotus Notes
Bart Schelstraete wrote: > > On 9/18/06, *Romulo Sousa* <[EMAIL PROTECTED] > <mailto:[EMAIL PROTECTED]>> wrote: > > Hi all, > > I use Notes on my job and I could emulate it using wine. > Unfortunatelly, an expected termination is happening when I open > emails w/ some attached files. Can somebody tell me please how I can > fix it? > > > > Why are you using wine to run Lotus notes? Lotus notes 7 is available > for Linux... >From where can you download Notes 7 for Linux? I wasn't able to find it in the IBM site. Mirto > > > Bart > > -- > Schelstraete Bart > http://www.schelstraete.org <http://www.schelstraete.org> > [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> -- __ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Etch doesn't install in a ESX VmWare virtual machine (sarge yes)
Hi all, after some test I discovered that Sarge installs correctly. So I suppose that is something related to the installer (I tried the text and the graphic installer). Any hint? Thanks Mirto Mirto Silvio Busico wrote: > Hi all, > > I'm trying to install etch al a virtual machine (Vmware ESX Server 3.0) > The ESX Sever sees an iscsi disk > > The virtual machine can see scsi disks with emulated controllers > buslogic or lsi (neither worked) > > The error appears when I try to install GRUB in the mbr. I recevi the error: > > Ipossible to install GRUB on (hd0) > execution of 'grub-install(hd0)' failed > Fatal error > > I tried different snapshots of etch an one of this installs correctly on > several machines. > > What can i do? > > Thanks > Mirto > > -- __ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Etch doesn't install in a ESX VmWare virtual machine
Hi all, I'm trying to install etch al a virtual machine (Vmware ESX Server 3.0) The ESX Sever sees an iscsi disk The virtual machine can see scsi disks with emulated controllers buslogic or lsi (neither worked) The error appears when I try to install GRUB in the mbr. I recevi the error: Ipossible to install GRUB on (hd0) execution of 'grub-install(hd0)' failed Fatal error I tried different snapshots of etch an one of this installs correctly on several machines. What can i do? Thanks Mirto -- ______ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Etch: OpenOffice 2.0.3 - Base: wizard don't work
He all, anyone have this problem? In OO Base, when you try to add a form using the wizard, all seems to work but when you click on the edn button nothin happens. The only thing that is accepted is clicking the cancel button. I tried the 2.0.3-2 from Etch and 2.0.3-6 from unstable (but in this case the openoffice.org.java-common remains at 2.0.3-2) I also tried different java, included the one from Sun. Anyone knows how to solve this? Thanks Mirto -- __ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Installing Etch: how to select KDE instead of GNOME?
First of all, thanks to you all. I've tried "installgui acpi=off tasksel/first=kde-desktop" The installation starts without complaining, but kde is not installed. Searching with synaptic, there is no metapackage called kde-desktop. I mispelled something? There is any documentation about the booting parameters? (in the F1-F10 help screens there is nothing about tasksel) Thanks Mirto Gustavo Franco wrote: > On 8/22/06, Joey Hess <[EMAIL PROTECTED]> wrote: >> Gustavo Franco wrote: >> > If the user wants to use the GUI frontend it would be ''installgui >> > tasksel/first=kde-desktop', right? >> > >> > Couldn't we change the options adding 'installdesktop', >> > 'installguidesktop', 'installdesktopkde' and 'installguidesktopkde' ? >> >> Sounds like a combinational explosion to me. I imagine syslinux has some >> upper bound on the number of supported labels. Don't see the benefit. >> > > When leaving a conference, being asked 'hey, how can i install > kde/gnome desktop by default?' i would be able to answer 'type > installdesktop or installdesktopkde and press enter'. This is way more > user friendly than 'install tasksel/first=gnome-desktop' that a human > won't be able to remember if said that way i wrote above. It happens, > it really happens all the time and actually i've no answer. > > regards, > -- stratus > > -- __ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Installing Etch: how to select KDE instead of GNOME?
Hi all, How cai I select Kde instead of Gnome during a fresh install? For now I have to install the base system and then install Kde. Then I have to swicth the login interface. Any hint? Thanks Mirto -- __ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Etch graphic installer: no "@" in the proxy setup
Hi all, I've just downloaded tge DVD iso image for Etch (dated 21-Aug-2006). If I try the "installgui" installation, when I arrive to the "select a mirror", the window asking for a proxy server to use to reach a mirror, I cannot type the at character (@) for the proxy string. I'm installing in: language: italian keyboard language: italian Anybody is experiencing the same problem? Thanks Mirto -- __________ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Memory card reader on Etch
Sorry. Not posted to the list. Ron Johnson wrote: > Mirto Silvio Busico wrote: > >> Hi all, > >> > >> where can I find information on using an integrated memory card reader? > >> > >> I have a Toshiba laptop with an integrated memory card reader. > >> I'm using Etch > > It should "just work". Are you having any specific problems? > > Probably I'm not able to see the memory card mounted. When I insert the memory card, I didn't see it not in mount, nor appears an icon (as it does for usb pen drive).. If I look at PCI elements I see: ... msb01:~# lspci 00:00.0 Host bridge: ATI Technologies Inc RS300 Host Bridge (rev 02) 00:01.0 PCI bridge: ATI Technologies Inc Radeon 9100 IGP AGP Bridge 00:13.0 USB Controller: ATI Technologies Inc OHCI USB Controller #1 (rev 01) 00:13.1 USB Controller: ATI Technologies Inc OHCI USB Controller #2 (rev 01) 00:13.2 USB Controller: ATI Technologies Inc EHCI USB Controller (rev 01) 00:14.0 SMBus: ATI Technologies Inc ATI SMBus (rev 1a) 00:14.1 IDE interface: ATI Technologies Inc ATI Dual Channel Bus Master PCI IDE Controller 00:14.3 ISA bridge: ATI Technologies Inc Unknown device 434c 00:14.4 PCI bridge: ATI Technologies Inc Unknown device 4342 00:14.5 Multimedia audio controller: ATI Technologies Inc IXP150 AC'97 Audio Controller (rev 01) 00:14.6 Modem: ATI Technologies Inc IXP AC'97 Modem (rev 01) 01:05.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] 02:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) 02:02.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01) 02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 02:04.0 CardBus bridge: ENE Technology Inc CB-710/2/4 Cardbus Controller 02:04.1 FLASH memory: ENE Technology Inc ENE PCI Memory Stick Card Reader Controller 02:04.2 Class 0805: ENE Technology Inc ENE PCI Secure Digital Card Reader Controller 02:04.3 FLASH memory: ENE Technology Inc FLASH memory: ENE Technology Inc: msb01:~# ... The last four lines seems to indicate that the card reader is working. Mybe I'm doing something wrong. Mirto > -- > Ron Johnson, Jr. > Jefferson LA USA > > Is "common sense" really valid? > For example, it is "common sense" to white-power racists that > whites are superior to blacks, and that those with brown skins > are mud people. > However, that "common sense" is obviously wrong. > > -- > > __ > Mirto Silvio Busico ICT Consultant > Tel. +39 333 4562651 > > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Memory card reader on Etch
Hi all, where can I find information on using an integrated memory card reader? I have a Toshiba laptop with an integrated memory card reader. I'm using Etch Thanks Mirto -- __ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: PD: Etch doesn't see an usb camera - errata
Thanks! I'll try this nigth. Mirto Zbigniew Wiech wrote: > > "camera" and *"users"* groups > > regards > Zbigniew > -- Przesłane przez: Zbigniew Wiech/HeadQ w dniu 2006-07-31 12:43 > - > *Zbigniew Wiech/HeadQ* > > 2006-07-31 12:42 > > > Do > debian-user@lists.debian.org > DW > [EMAIL PROTECTED] > Temat > Odp: Etch doesn't see an usb cameraŁącze > > > > > > > > > > > I had the same problem in "sarge". > add the user to"camera" group. > > regards > Zbigniew > > > *Mirto Silvio Busico <[EMAIL PROTECTED]>* > > 2006-07-31 12:04 > > > Do > debian-user@lists.debian.org > DW > > Temat > Etch doesn't see an usb camera > > > > > > > > > Hi all, > anyone experienced this problem? > > Using Etch and a Canon s1 is (ptp prtotcol?) I am not able to access the > photo in the camera. > > The camera is correctly detected as an usb device. > When I connect the camera a popup window (I'm using KDE) asks If I want > to open the camera as a folder or with digikam. > Digikam is not able to autodetect the camera. Forcing the model (tried > normal protocol and ptp) the progam says: "cannot access the mamera": > Trying to open the camera with Konqueror I see a page with the address > "media:/camera" containing a folder called "camera"; clicking on the > folder I see the same page but with the address "media:/camera/camera" > (a new /camera for every click). > > Any hint? > > Thanks > Mirto > > -- > > __ > Mirto Silvio Busico ICT Consultant > Tel. +39 333 4562651 > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] > -- __ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651
Etch doesn't see an usb camera
Hi all, anyone experienced this problem? Using Etch and a Canon s1 is (ptp prtotcol?) I am not able to access the photo in the camera. The camera is correctly detected as an usb device. When I connect the camera a popup window (I'm using KDE) asks If I want to open the camera as a folder or with digikam. Digikam is not able to autodetect the camera. Forcing the model (tried normal protocol and ptp) the progam says: "cannot access the mamera": Trying to open the camera with Konqueror I see a page with the address "media:/camera" containing a folder called "camera"; clicking on the folder I see the same page but with the address "media:/camera/camera" (a new /camera for every click). Any hint? Thanks Mirto -- __________ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Problems with Kdeprint and Cups (SOLVED)
Florian Kulzer wrote: > On Mon, Jun 26, 2006 at 11:34:51 +0200, Mirto Silvio Busico wrote: > >> Hi all, >> I have a debian Etch installed from scratch and I'm experiencing >> problems when printing. >> >> I'm using: >> KDM window manager >> cupsys 1.2.1-2 >> kdeprint 4.3.5.3-2 >> >> Kdeprint refuse to use cups as printing system saying that he cannot >> retrieve the printer's list. >> >> Some applications (firefox, openoffice) don't print and see only a >> "generic printer" instead of the printer's list. >> > > I had the same problem a few days ago on Sid. I could solve it by > commenting out the line > > Listen /var/run/cups/cups.sock > > in /etc/cups/cupsd.conf, so that it only had "Listen localhost:631". > After restarting cupsys everything was fine again. > > For your version of cupsys you have to check both /etc/cups/cupsd.conf > (it should be commented out in there already) and > /etc/cups/cups.d/ports.conf. > Great! The line was only in /etc/cups/cups.d/ports.conf Now it works again Thanks a lot! Mirto > I don't know if this is a proper solution or just a workaround for some > problem in kprinter. If that line is not commented out kprinter will > pick "/var/run/cups/cups.sock" as the printer address and it seems > unable to use this socket instead of port 631. > > -- __ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Problems with Kdeprint and Cups
Hi all, I have a debian Etch installed from scratch and I'm experiencing problems when printing. I'm using: KDM window manager cupsys 1.2.1-2 kdeprint 4.3.5.3-2 Kdeprint refuse to use cups as printing system saying that he cannot retrieve the printer's list. Some applications (firefox, openoffice) don't print and see only a "generic printer" instead of the printer's list. Any hint? Thanks Mirto -- __________ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Open Office 2: where can I find italian hypenation pakage?
Olafur Jens Sigurdsson wrote: > Þann 2006-06-15, 09:53:40 (+0200) skrifaði Mirto Silvio Busico: > >> Hi all, >> sorry for cross-posting, but I don't know which is the right list. >> >> I need to use the italian localized version of oo2 on a Debian Etch >> distribution >> >> In the Debian testing (also in unstable) I have: >> >> openoffice.org.I10n.it (2.0.1-5) wich gives me the italian user >> interface >> openoffice.org-thesaurus-it the italian thesaurus >> myspell.it that seems to be used as the italian spellchecker >> missing openoffice.org-hypenation.it (I have only German Hungarian >> and Lithuaian) so no hypenation >> >> Where can I find the missing hypenation package? >> >> There is any recommended place/repository for italian localization of >> openoffice? >> > > Hi Mirto > > Usually I use OO to install dictionarys and stuff like that, I go to > File->Wizards->Install new dictionries and follow the instructions > there. I dont know if that will install a hyphenation allso, but I > think it will. > > HTH > > Oli > > > Thaks it worked! Mirto -- __ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651
Open Office 2: where can I find italian hypenation pakage?
Hi all, sorry for cross-posting, but I don't know which is the right list. I need to use the italian localized version of oo2 on a Debian Etch distribution In the Debian testing (also in unstable) I have: openoffice.org.I10n.it (2.0.1-5) wich gives me the italian user interface openoffice.org-thesaurus-it the italian thesaurus myspell.it that seems to be used as the italian spellchecker missing openoffice.org-hypenation.it (I have only German Hungarian and Lithuaian) so no hypenation Where can I find the missing hypenation package? There is any recommended place/repository for italian localization of openoffice? Thanks Mirto -- __ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: etch - error upgrading xlibmesa-gl_6.9.0.dfsg.1-6_i386.deb
... Mi preparo a sostituire postfix-doc 2.2.9-1 (con .../postfix-doc_2.2.10-1_all.deb) ... Spacchetto il sostituto di postfix-doc ... Sono occorsi degli errori processando: /var/cache/apt/archives/xlibmesa-gl_6.9.0.dfsg.1-6_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) msb01:~# heba ha scritto: >2006/4/11, Mirto Silvio Busico <[EMAIL PROTECTED]>: > > >>Hi all, >>I've tried an "apt-get dist-upgrade" on an etch installation; but I >>received an error o the xlibmesa-gl_6.9.0.dfsg.1-6_i386.deb package >> >>Here is the error message: >>--- >>Mi preparo a sostituire xlibmesa-gl 6.9.0.dfsg.1-4 (con >>.../xlibmesa-gl_6.9.0.dfsg.1-6_i386.deb) ... >>Spacchetto il sostituto di xlibmesa-gl ... >>dpkg: errore processando >>/var/cache/apt/archives/xlibmesa-gl_6.9.0.dfsg.1-6_i386.deb (--unpack): >> impossibile creare `./usr/X11R6/lib/libGL.so.1.2': No such file or >>directory >>dpkg-deb: il sottoprocesso paste è stato terminato dal segnale (Pipe rotta) >> >> >>Here is my apt/sources.list: >> >># deb cdrom:[Debian GNU/Linux testing _Etch_ - Official Snapshot i386 >>Binary-1 (20060118)]/ etch contrib main >> >># deb cdrom:[Debian GNU/Linux testing _Etch_ - Official Snapshot i386 >>Binary-1 (20060118)]/ etch contrib main >> >>deb http://mi.mirror.garr.it/mirrors/debian/ etch main contrib non-free >>deb-src http://mi.mirror.garr.it/mirrors/debian/ etch main contrib non-free >># deb http://mi.mirror.garr.it/mirrors/debian/ unstable main contrib >>non-free >># deb http://mi.mirror.garr.it/mirrors/debian/ experimental main contrib >>non-free >> >>#altra fonte >># deb http://splashy.alioth.debian.org/debian/ unstable main >>#MPlayer W32Codecs Other Stuff >>deb ftp://ftp.nerim.net/debian-marillat/ etch main >> >> >>deb http://security.debian.org/ etch/updates main contrib non-free >> >>---- >> >>Is the package corrupted in the repository? >> >>Have I to use differente repositories? >> >>Thanks for the help >>Mirto >> >> > >Hi, > >try this: > >apt-get -f upgrade > >if it writes mistakes again, I think was a package corrupted > >regards, > >Heba > > > > -- __ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651
etch - error upgrading xlibmesa-gl_6.9.0.dfsg.1-6_i386.deb
Hi all, I've tried an "apt-get dist-upgrade" on an etch installation; but I received an error o the xlibmesa-gl_6.9.0.dfsg.1-6_i386.deb package Here is the error message: --- Mi preparo a sostituire xlibmesa-gl 6.9.0.dfsg.1-4 (con .../xlibmesa-gl_6.9.0.dfsg.1-6_i386.deb) ... Spacchetto il sostituto di xlibmesa-gl ... dpkg: errore processando /var/cache/apt/archives/xlibmesa-gl_6.9.0.dfsg.1-6_i386.deb (--unpack): impossibile creare `./usr/X11R6/lib/libGL.so.1.2': No such file or directory dpkg-deb: il sottoprocesso paste è stato terminato dal segnale (Pipe rotta) Here is my apt/sources.list: # deb cdrom:[Debian GNU/Linux testing _Etch_ - Official Snapshot i386 Binary-1 (20060118)]/ etch contrib main # deb cdrom:[Debian GNU/Linux testing _Etch_ - Official Snapshot i386 Binary-1 (20060118)]/ etch contrib main deb http://mi.mirror.garr.it/mirrors/debian/ etch main contrib non-free deb-src http://mi.mirror.garr.it/mirrors/debian/ etch main contrib non-free # deb http://mi.mirror.garr.it/mirrors/debian/ unstable main contrib non-free # deb http://mi.mirror.garr.it/mirrors/debian/ experimental main contrib non-free #altra fonte # deb http://splashy.alioth.debian.org/debian/ unstable main #MPlayer W32Codecs Other Stuff deb ftp://ftp.nerim.net/debian-marillat/ etch main deb http://security.debian.org/ etch/updates main contrib non-free Is the package corrupted in the repository? Have I to use differente repositories? Thanks for the help Mirto -- __________ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651
Introducing myself and ATI+Toshiba problem
Hi all, I'm an ICT Consultant in Rome (Italy) I'm just switching to Debian (etch) from a commercial Linux distribution. Normally my customers use a commercial Linux distribution and are prone to religious wars about the distribution to use. So I decided to use a distribution that is not commercial at all, in order to propose/show prototypes that are commercial (marketing?) neutral. I've installed etch on my Toshiba Satellite P20 (with an ATI graphic card), and now I'm triyng to put at work the hardware components. I've a lot of problems, but I'll start a new tread for the not working components. Here only a question: How can I use the external monitor? (it seems that the standard X configuration is not good). It is only a configuration problem, or there is something to do in order to enable the secondary monitor? BTW the fnfxd package says that the kernel lacks the Toshiba support. There is any documentation about this issue? Any help will be greately appreciated. Regards Mirto -- __________ Mirto Silvio Busico ICT Consultant Tel. +39 333 4562651 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
