gcc-10: options order important?
Hi, in contrary to previous versions, now in Debian 11 with gcc-10: gcc aa.c -lm -o aa works, but gcc -lm aa.c -o aa does not work, saying: /usr/bin/ld: /tmp/ccWyhudO.o: in function `main': aa.c:(.text+0x1f): undefined reference to `sqrt' collect2: error: ld returned 1 exit status My aa.c content: --- #include #include int main(void) { double x=4; printf("sqrt(4)=%f\n",sqrt(x)); return 0; } --- It seems that an option -lm cannot be placed in an arbitrary place which I used to do. Is this intentional ? Regards, Piotr A. Dybczyński -- /** dr Piotr A. Dybczyński homepage: https://www.dybczynski.pl/Piotr e-mail: pi...@dybczynski.pl PAD***/
Re: Debian 11 doesn't suspend properly on Acer Aspire 5 A515-51G-52GM
Hi, I have similar problem on Dell Inspiron 3580 Both after upgrade from Buster to Bullseye and after clean install on a seprate partition laptop does not wake up (in fact it sometimes does) but completely freezes, only power off can help. When I booted Bullseye with the previous kernel (4.19) it works OK. My hardware is (from lspci): 00:02.0 VGA compatible controller: Intel Corporation WhiskeyLake-U GT2 [UHD Graphics 620] 01:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Jet PRO [Radeon R5 M230 / R7 M260DX / Radeon 520 Mobile] (rev c3) Regards, Piotr -- /** dr Piotr A. Dybczyński homepage: https://www.dybczynski.pl/Piotr e-mail: pi...@dybczynski.pl PAD***/
Accessing SSH server over VPN
I have hardware router which allows to configure VPN. I managed to set it up on my laptop (debian Stretch) in the NetworkManager applet. So now I can connect from office to outside word using my home router as a proxy (when I check my IP it shows the IP of my router). I can also connect to one linux desktop machine (debian Jessie), however not by VPN, but this is not an issue. The issue is that when I connect to my desktop I would like to ssh back to my laptop using VPN channel, so I could open the result in the local X server. The problem is that I cannot even ssh to my laptop when I try to use laptop VPN IP. What would I have to check/try in order to resolve the issue? Kind regards, Piotr
Re: Hibernate in Testing
On 2018-10-08, Hans wrote: > Am Montag, 8. Oktober 2018, 04:00:50 CEST schrieb Carl Fink: > Hibernate is not working any more since over a year. They say, this cannot be > fixed and will not be fixed, due it is not possible because of the wide > differences in the hardware. > > Besides: same here, hibernates works, but restore let the system crash. You > are not alone. :) It was working in Jessie. They broke in Stretch. Hardware did not change. Lame excuses. :( Regards, Piotr
Re: mailing list vs "the futur"
On 2018-08-24, Zenaan Harkness wrote: > ed, awk and fast typing to filter those convos of interest "on > demand" ought be plenty for anyone ... sheesh! > > Man, when we wuz yung unz, we were -lucky- to even have cosmic rays > for editing. > https://xkcd.com/378/ No need to go for extreemes. Good NNTP client would do what you want. And for these who want learn nothing e-mail access was invented. :)
Re: mailing list vs "the futur"
On 2018-08-23, rhkra...@gmail.com wrote: > On Thursday, August 09, 2018 01:47:24 PM Greg Wooledge wrote: >> On Thu, Aug 09, 2018 at 05:39:36PM +, tech wrote: >> > Should'nt be time to move away from an old mail-listing to something more >> > modern like a bugzilla or else ??? NNTP was the way. You do not need more than this.
Re: Routing all traffic trough VPN
On 2018-08-16, john doe wrote: > This configuration assumes that the clients will get "all configuration" > from the server. Initially I had a problem importing my VPN settings to network manager. Now I see it is working and I was able to fill in the gaps so I got a working VPN connection. I did not have the resolvconf package installed, so I had to install it. Thanks for guidance. Regards, Piotr
Re: Routing all traffic trough VPN
On 2018-08-16, john doe wrote: > On the vpn client are you getting the proper DNS in '/etc/resolv.conf' > when connected to your vpn server? It changes (adds nameserver 192.168.2.1 on top), but this does not seems to be valid as the IP's I got are from the network 10.8.0.xx and the one I got is the local IP of one of my machines at home. What should be there instead? Can this update-resolv-conf script be used to use different valid entry unstead? Regards, Piotr
Re: Routing all traffic trough VPN
On 2018-08-06, Joe wrote: > I believe it should happen by default, this is almost always what you > want. I'm fairly sure I've never had to ask for this. > > When the VPN connects, Network Manager should adjust routing so that > the VPN becomes the default gateway. To disable this behaviour, there > is a tick box somewhere in IP properties of the VPN connection, I think. It actually does the thing automatically, but I cannot get any Internet connection when the VPN is enabled. >From the other side, when I use the OpenVPN on the android all traffic is rerouted correctly via VPN (my router) so I can have internet connection as I would sit at home. How can I configure it on Debian so I will have the same situation? Which Info sould I provide you in oorder to give some concrete help? Regards, Piotr
Re: mailing list vs "the futur"
[This mail was also posted to linux.debian.user.] On Fri, 10 Aug 2018 13:30:01 +0200, Rich Kulawiec wrote: > On Fri, Aug 10, 2018 at 06:24:55AM -0400, Dan Ritter wrote: >> I get more mail than that before breakfast. If you've got the right >> tools, it's easy to deal with. > > This is an excellent point. Many of the people who lodge complaints > like the one that started this discussion thread have chosen very poor > tools and thus have conflated the failings of those tools with some > non-existent inherent problems with mailing lists. The best was NNTP, but sadly there are not many places where it is still used. Web and e-mail approach is for more "handicaped" users, and as the exampes shows, there are many of them. Otherwise the trend would be to stick to NNTP and not to move to no powerfull solutions. Regards, Piotr
Routing all traffic trough VPN
[This mail was also posted to linux.debian.user.] Hi, On Debian Stretch I managed to configure VPN connection using network- manager. Now I would like to redirect all traffic to VPN (whenever VPN is available) and revert back to current state (if VPN is not available). The only problem is that I do not know how to do this. Kind regads, Piotr
Re: Calculator with "tapes"
On Mon, 16 Jul 2018 12:57:58 -0400 Ken Heard wrote: > Does Debian have a calculator package which has the equivalent of the > tape produced by mechanical machines to show the entire calculation. I > find such "tapes" essential when for example I am adding a long list of > numbers and need to check after the addition is done to verify that all > the numbers were entered correctly. I use speedcrunch under X11 for this. speedcrunch/stable,now 0.12.0-1 i386 [installed] High precision calculator Regards, Piotr
Cannot send local e-mails.
Hi, When some process produces an error, then root should receive an e-mail. Instead I gets some error message forwarded to my gmail account (see below). What should I configure to make a local e-mails working? Regards, Piotr from: Mail Delivery Subsystem to: zaxonx...@gmail.com Subject: Delivery Status Notification (Failure) ** Address not found ** Your message wasn't delivered to user@localhost.localdomain because the domain localhost.localdomain couldn't be found. Check for typos or unnecessary spaces and try again. The response was: DNS Error: 17728931 DNS type 'mx' lookup of localhost.localdomain responded with code NXDOMAIN Domain name not found: localhost.localdomain
Re: How to access this group via NNTP in PAN client.
On Friday, 6 July 2018 17:20:03 UTC+2, Dan Ritter wrote: > The missing ingredient here is an NNTP server that: > > a) carries linux.debian.user > b) gives you read and, optionally, post privileges Any ideas how to find them? Regards, Piotr
Re: Brightness at 100% after every reboot.
On Mon, 18 Jun 2018 17:24:11 +0900 likcoras wrote: > You may try looking into the systemd-backlight@*.service, see if it's > starting properly on your system or if it prints any errors while it > starts. Strange thing that I see more than one backlight service starting. Should I have both of them running? Why do they appear twice in the journalctl? Could this be a source of issue? Also I do not see the errors in the logs. Regards, Piotr Jun 18 09:46:05 localhost systemd[1]: Created slice system-systemd\x2dbacklight.slice. Jun 18 09:46:05 localhost systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:samsung... Jun 18 09:46:05 localhost systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:intel_backlight... Jun 18 09:46:05 localhost systemd[1]: Reached target Sound Card. Jun 18 09:46:05 localhost systemd[1]: Starting File System Check on /dev/mapper/vgssd-home... Jun 18 09:46:05 localhost systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. Jun 18 09:46:05 localhost systemd[1]: Activating swap /dev/mapper/vgssd-swap... Jun 18 09:46:05 localhost systemd[1]: Starting File System Check on /dev/disk/by-uuid/1907af6f-f818-407b-8480-c71907fc9880... Jun 18 09:46:05 localhost systemd[1]: Starting Cryptography Setup for ssdcrypt... Jun 18 09:46:05 localhost kernel: Adding 2740220k swap on /dev/mapper/vgssd-swap. Priority:-2 extents:1 across:2740220k SSFS Jun 18 09:46:05 localhost systemd-cryptsetup[472]: Volume ssdcrypt already active. Jun 18 09:46:05 localhost systemd[1]: Activated swap /dev/mapper/vgssd-swap. Jun 18 09:46:05 localhost systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:samsung. Jun 18 09:46:05 localhost systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:intel_backlight. Jun 18 09:46:05 localhost systemd[1]: Started Cryptography Setup for ssdcrypt. Jun 18 09:46:05 localhost systemd[1]: Started File System Check Daemon to report status. Jun 18 09:46:05 localhost systemd[1]: Reached target Local Encrypted Volumes. Jun 18 09:46:05 localhost systemd[1]: Reached target Swap. Jun 18 09:46:05 localhost systemd[1]: Starting Load/Save RF Kill Switch Status...
Re: Brightness at 100% after every reboot.
On Mon, 18 Jun 2018 01:50:55 +1000 Zenaan Harkness wrote: > Your desktop (Gnome, XFCE, KDE etc) should have a brightness app and > a session manager which, when you log out, knows to signal the apps > to store their relevant settings so that those settings are > re-applied when you next log in. It is XFCE and there is Power Manager which allows to change the brightness. However since I upgraded from Jessie to Stretch the brightness settings are not preserved between the sessions (after reboot the brightness is at 100%). In Jessie there was no issue. > Another "problem" which can happen - if you set internal laptop LCD > to zero brightness, then suspend, then unsuspend, brightness in some > configs gets set back to 100% - but this is so that user knows to > enter e.g. password to unlock the screen, which might be challenging > if it is set to zero brightness... I always sets about 50% so for me it would be no issue. The issue is that it is always 100% and hurts my eyes. Maybe I should report this as a bug. Regards, Piotr
Re: Gtk-ERROR **: GTK+ 2.x symbols detected. Using GTK+ 2.x and GTK+ 3 in the same process is not supported
On Wed, 13 Jun 2018 19:18:25 +0200 Ulf Volmer wrote: > AFAIK mate-users-admin is not available in stretch. > only in jessie (in package mate-system-tools). > Are you sure that you have an uptodate stretch system without > old packages from jessie? How can I check if I still have some old packages from Jessie? I order to upgrade my Jessie to Stretch I followed the steps from this guide: https://www.howtoforge.com/tutorial/how-to-upgrade-debian-8-jessie-to-9-stretch/ And there was no steps to check and remove old packages. Can you please tell me how to do this? Regards, Piotr
Gtk-ERROR **: GTK+ 2.x symbols detected. Using GTK+ 2.x and GTK+ 3 in the same process is not supported
Dear all, When I try to open the "mate-users-admin" from the terminal on Stretch I am getting such error and the app does not open: (mate-users-admin:2254): Gtk-ERROR **: GTK+ 2.x symbols detected. Using GTK+ 2.x and GTK+ 3 in the same process is not supported Trace/breakpoint trap How to fix this? Regards, Piotr
Mouse with extra buttons. How to configure them?
Dear all, I got new mouse which has some extra buttons, but in standard Xfce4 settings there is no way to configure some functions for them. Is there a software to do this? Can it be done in some configuration files? The extra buttons are: back, forward, DPI. Also how to change what clicking the wheel should do? Regards, Piotr
Brightness at 100% after every reboot.
Dear all, After upgrading to Stretch I have problem with the brightness of my LCD screen in laptop. After a reboot of the system I get 100% brightness, even if I set it up to like 50%. Where can I change this so the settings are preserved between the reboots? Regards, Piotr
Re: Hibernation does not work after upgrade to Stretch
On Wed, 13 Jun 2018 04:04:54 + (UTC) davidson wrote: > at a search engine eventually led me to this 2007 document, which > looks interesting: > >https://www.kernel.org/doc/Documentation/power/basic-pm-debugging.txt > > I have not yet read it in full, (and so, obviously) have never used it > myself. Thanks for the url to the document. I started to follow it and 3 first tests were not successful (either hang up or crash and reboot after restoring the image). So I would like to do a debug. I saw that it is mentioned that: "To find out why hibernation fails on your system, you can use a special testing facility available if the kernel is compiled with CONFIG_PM_DEBUG set." Does this mean that I have to install linux-image-4.16.0-0.bpo.2-686-pae-dbg kernel in order to proceed with this? Regards, Piotr
Re: Hibernation does not work after upgrade to Stretch
On Tue, 12 Jun 2018 18:12:42 +0200 Hans wrote: > Am Dienstag, 12. Juni 2018, 17:31:44 CEST schrieb Piotr: > Same here, just almost since a year. I doubt, this will be fixed. As far as I > read, this is too difficult for the developers, due to the very different > hardware. The problem is, the playing together with kernel, hardware and > hibernation software is too complex, so there is only little chance, this bug > can be dfixed at all. > > Sorry, to disappoint you at the moment. It is pity that it worked well with Jessie with no hardware change. Somebody told me that I should try different kernel versions, but even the latest does not work. It was nice to have a hibernate to disk, but now I have to live without it. Luckily debian starts fast on my old laptop, Thanks for the info. Regards, Piotr
Hibernation does not work after upgrade to Stretch
Dear all, Recently I upgraded my Jessie to Stretch and since then I do not have working hibernation. When I do hibernate-disk, then it seems to be making a memory snapshot, but when I restart I gets a hang up with a black screen or reboot (depends on which kernel version I use). Already tried with 4.16.0-0.bpo.2-686-pae, 4.16.0-0.bpo.1-686-pae and with linux-image-3.16.0-5-686-pae. How should I debug this issue and fix it? Regards, Piotr
Hibernation is not working after upgrading frmo Jessie to Stretch.
Dear all, Recently I upgraded my Debian Jessie to Stretch and I noticed that hibernation does not work anymore. When I try to hibernate to disk the process of saving the current memory state seems to be doing the job correctly. However, when I start the laptop I see that restoring the state begins, but in the middle laptop reboots and starts normal booting instead of restoring after hibernation. Which logs should I submit in order to get some help? Kind regards, Piotr
Re: Upgrade from Jessie to Stretch: Bluetooth mouse is not working.
On Thu, 31 May 2018 11:04:10 -0500 "Martin McCormick" wrote: > You might search web archives and internet discussion > groups to see if there is a replacement driver for the mouse > which is a real shame since it used to work but that particular > module doesn't work which is valuable information but not, of > course, what you wanted to know. Any hints where to start and what to look for? I bought this mouse because it was really silent and cheap (APOINT M302) and it was working with Debian Jessie. https://www.aliexpress.com/item/New-Bluetooth-Ultra-thin-Rechargeable-Wireless-Mouse-Silent-Button-2015-computer-mouse-for-laptop-gift-mice/32368987723.html?spm=a2g0s.9042311.0.0.27424c4dCuQb1a Officially Linux support was not mentioned, so it might be difficult to find a drivers for it. I wonder what was changed between Debian releases that this mouse is no longer working correctly? For me looks like a regression which should be fixed. Should I reported this as a bug? If "yes" then which module/driver should I specify as a victim? > Can you get any other bluetooth device to pair and > actually work with the dongle such as a headset or keyboard? Yes, I was able to successfully connect some remote controller/gamepad which also has mouse option: https://www.amazon.de/ddLUCK-Universal-Wireless-Controller-Bluetooth-Remote/dp/B01ICYZ7ZI/ref=sr_1_12/262-6869085-0156757?ie=UTF8=1527838130=8-12=mocute Maybe I should also try with another BT mouse to see if it has the same issue or not. > There are a lot of moving parts here such as the usb > driver for the dongle and then there is the communication between > the bluetooth device and the dongle. > > dmesg and syslog are very good tools in cases like this > but the messages you will read aren't always the answers to the > question of why this or that is happening. They certainly do > help you ask new questions and sometimes rule out rabbit holes > you don't need to waste your time going down which is a blessing > as the world of making the technology work for you is a regular > warren of rabbit holes and anything that narrows down the > solution is a force multiplier. > > One guess is that the driver for the bluetooth dongle is > causing the grief because it sees events that it doesn't > understand from the mouse. It should understand every mouse move > and button press so they can be passed on to the appropriate > function calls related to mouse activity. The OS has mouse > function calls and the driver translates mouse movement data in > to steps that are either along the X or Y axese. It doesn't have > to do anything but feed those steps to the OS by making the > appropriate function calls for movement and clicks. It > apparently can't do that so you need a different driver. > > It might also be that another bluetooth mouse speaks a > different language and the driver understands it and works > properly so I hope this gives you more food for thought. > > I don't really know anything specific to your problem so > I am speaking in generalities as I have seen a number of usb > devices such as a usb apple modem that shows activity in syslog > when you plug it in to a usb port but due to a lack of a driver, > it does absolutely nothing under Linux but get slightly warm to > the touch. Plug it in to a Mac and you're in to the dialup > business. > > Martin McCormick > Thanks for elaborate explanation. Kind regards, Piotr
Re: Upgrade from Jessie to Stretch: Bluetooth mouse is not working.
On Thu, 31 May 2018 14:58:59 +0200 deloptes wrote: > you sure about init? ps -A | head -3 This is what I got. user@localhost:~$ ps -A | head -3 PID TTY TIME CMD 1 ?00:00:01 init 2 ?00:00:00 kthreadd > so what is the dbus-monitor output now See the new log file. But still it says that destination is null. What next to check? Regards, Piotr signal time=1527772847.995587 sender=:1.3 -> destination=(null destination) serial=264 path=/org/bluez/hci0/dev_DC_2C_26_F8_43_A7; interface=org.freedesktop.DBus.Properties; member=PropertiesChanged string "org.bluez.Device1" array [ dict entry( string "Class" variant uint32 1408 ) dict entry( string "Icon" variant string "input-mouse" ) dict entry( string "Connected" variant boolean true ) ] array [ ] method call time=1527772848.000769 sender=:1.43 -> destination=org.bluez serial=254 path=/org/bluez/hci0/dev_DC_2C_26_F8_43_A7; interface=org.freedesktop.DBus.Introspectable; member=Introspect method return time=1527772848.001241 sender=:1.3 -> destination=:1.43 serial=265 reply_serial=254 string "http://www.freedesktop.org/standards/dbus/1.0/introspect.dtd;> " method call time=1527772848.007401 sender=:1.43 -> destination=org.bluez serial=255 path=/org/bluez/hci0/dev_DC_2C_26_F8_43_A7; interface=org.freedesktop.DBus.Properties; member=GetAll string "org.bluez.Device1" method return time=1527772848.007917 sender=:1.3 -> destination=:1.43 serial=266 reply_serial=255 array [ dict entry( string "Address" variant string "DC:2C:26:F8:43:A7" ) dict entry( string "Name" variant string "Bluetooth 3.0 Mouse" ) dict entry( string "Alias" variant string "Bluetooth 3.0 Mouse" ) dict entry( string "Class" variant uint32 1408 ) dict entry( string "Icon" variant string "input-mouse" ) dict entry( string "Paired" variant boolean true ) dict entry( string "Trusted" variant boolean false ) dict entry( string "Blocked" variant boolean false ) dict entry( string "LegacyPairing" variant boolean true ) dict entry( string "Connected" variant boolean true ) dict entry( string "UUIDs" variant array [ string "1000--1000-8000-00805f9b34fb" string "1124--1000-8000-00805f9b34fb" string "1200--1000-8000-00805f9b34fb" ] ) dict entry( string "Modalias" variant string "usb:v0A5Cp0001d0129" ) dict entry( string "Adapter" variant object path "/org/bluez/hci0" ) dict entry( string "ServicesResolved" variant boolean false ) ] method call time=1527772848.012017 sender=:1.43 -> destination=org.freedesktop.DBus serial=256 path=/org/freedesktop/DBus; interface=org.freedesktop.DBus; member=AddMatch string "type='signal',sender='org.freedesktop.DBus',path='/org/freedesktop/DBus',interface='org.freedesktop.DBus',member='NameOwnerChanged',arg0='org.bluez'" method return time=1527772848.012121 sender=org.freedesktop.DBus -> destination=:1.43 serial=125 reply_serial=256 method call time=1527772848.013964 sender=:1.43 -> destination=org.freedesktop.DBus serial=257 path=/org/freedesktop/DBus; interface=org.freedesktop.DBus; member=GetNameOwner string "org.bluez" method return time=1527772848.014089 sender=org.freedesktop.DBus -> destination=:1.43 serial=126 reply_serial=257 string ":1.3" method call time=1527772848.015379 sender=:1.43 -> destination=org.freedesktop.DBus serial=258 path=/org/freedesktop/DBus; interface=org.freedesktop.DBus; member=AddMatch string "type='signal',sender='org.bluez',path='/org/bluez/hci0/dev_DC_2C_26_F8_43_A7',interface='org.freedesktop.DBus.Properties',member='PropertiesChanged'" method return time=1527772848.015539 sender=org.freedesktop.DBus -> destination=:1.43 serial=127 reply_serial=258 method call time=1527772848.017622 sender=:1.43 -> destination=org.bluez serial=259 path=/; interface=org.freedesktop.DBus.Introspectable; memb
Re: Upgrade from Jessie to Stretch: Bluetooth mouse is not working.
On Thu, 31 May 2018 12:10:13 +0200 deloptes wrote: > You see all works fine until systemd gets in the game. > As I refused to use systemd I can't help much, but this needs to be > investigated Was Jessie already using systemd by default? If "yes" then maybe this is not the source of the problem as the mouse was working correctly on Jessie? I connected another BT controller (chinese MOCUTE BT controller, which can be used as keypad or mouse) and it was working correctly. > Here you see sender=:1.0 -> destination=(null destination) > > signal time=1527752498.410215 sender=:1.0 -> destination=(null destination) > serial=4147 path=/org/freedesktop/systemd1; > interface=org.freedesktop.systemd1.Manager; member=UnitRemoved > > Can you try booting without systemd ? You need sysvinit and add > init=/lib/sysvinit/init to your kernal command line. > When system is up check > > ps -A | head -3 > PID TTY TIME CMD > 1 ?00:00:33 init > 2 ?00:00:01 kthreadd OK, I booted as you suggested, but the mouse problem remains. Any other suggestions? Regards, Piotr
Re: Upgrade from Jessie to Stretch: Bluetooth mouse is not working.
On Tue, 29 May 2018 22:55:51 +0200 deloptes wrote: > dbus-monitor --system > > and switch mouse on/off to reconnect. Tell us what you see. I see the change was logged when I connected BT mouse (see dbus-monitor.log) > If mouse is > correctly discovered and selected by BT you have to look at higher level - > the X system. > First check if you have events captured by X perhaps with > > xev xev gives me nothing when I use the BT mouse. What next? Regards, Piotr signal time=1527752478.126670 sender=:1.3 -> destination=(null destination) serial=211 path=/org/bluez/hci0/dev_DC_2C_26_F8_43_A7; interface=org.freedesktop.DBus.Properties; member=PropertiesChanged string "org.bluez.Device1" array [ dict entry( string "Connected" variant boolean true ) ] array [ ] signal time=1527752478.129526 sender=:1.0 -> destination=(null destination) serial=4140 path=/org/freedesktop/systemd1; interface=org.freedesktop.systemd1.Manager; member=UnitNew string "sys-devices-pci:00-:00:1d.0-usb2-2\x2d1-2\x2d1:1.0-bluetooth-hci0-hci0:9.device" object path "/org/freedesktop/systemd1/unit/sys_2ddevices_2dpci_3a00_2d_3a00_3a1d_2e0_2dusb2_2d2_5cx2d1_2d2_5cx2d1_3a1_2e0_2dbluetooth_2dhci0_2dhci0_3a9_2edevice" signal time=1527752478.129628 sender=:1.0 -> destination=(null destination) serial=4141 path=/org/freedesktop/systemd1; interface=org.freedesktop.systemd1.Manager; member=UnitNew string "sys-subsystem-bluetooth-devices-hci0:9.device" object path "/org/freedesktop/systemd1/unit/sys_2dsubsystem_2dbluetooth_2ddevices_2dhci0_3a9_2edevice" method call time=1527752478.133231 sender=:1.51 -> destination=org.bluez serial=337 path=/org/bluez/hci0/dev_DC_2C_26_F8_43_A7; interface=org.freedesktop.DBus.Introspectable; member=Introspect method return time=1527752478.134333 sender=:1.3 -> destination=:1.51 serial=212 reply_serial=337 string "http://www.freedesktop.org/standards/dbus/1.0/introspect.dtd;> " method call time=1527752478.138316 sender=:1.51 -> destination=org.bluez serial=338 path=/org/bluez/hci0/dev_DC_2C_26_F8_43_A7; interface=org.freedesktop.DBus.Properties; member=GetAll string "org.bluez.Device1" method return time=1527752478.139445 sender=:1.3 -> destination=:1.51 serial=213 reply_serial=338 array [ dict entry( string "Address" variant string "DC:2C:26:F8:43:A7" ) dict entry( string "Name" variant string "Bluetooth 3.0 Mouse" ) dict entry( string "Alias" variant string "Bluetooth 3.0 Mouse" ) dict entry( string "Class" variant uint32 1408 ) dict entry( string "Icon" variant string "input-mouse" ) dict entry( string "Paired" variant boolean true ) dict entry( string "Trusted" variant boolean true ) dict entry( string "Blocked" variant boolean false ) dict entry( string "LegacyPairing" variant boolean false ) dict entry( string "Connected" variant boolean true ) dict entry( string "UUIDs" variant array [ string "1000--1000-8000-00805f9b34fb" string "1124--1000-8000-00805f9b34fb" string "1200--1000-8000-00805f9b34fb" ] ) dict entry( string "Modalias" variant string "usb:v0A5Cp0001d0129" ) dict entry( string "Adapter" variant object path "/org/bluez/hci0" ) dict entry( string "ServicesResolved" variant boolean false ) ] method call time=1527752478.141842 sender=:1.51 -> destination=org.freedesktop.DBus serial=339 path=/org/freedesktop/DBus; interface=org.freedesktop.DBus; member=AddMatch string "type='signal',sender='org.freedesktop.DBus',path='/org/freedesktop/DBus',interface='org.freedesktop.DBus',member='NameOwnerChanged',arg0='org.bluez'" method return time=1527752478.141939 sender=org.freedesktop.DBus -> destination=:1.51 serial=185 reply_serial=339 method call time=1527752478.143190 sender=:1.51 -> destination=org.freedesktop.DBus serial=340 path=/org/freedesktop/DBus; interface=org.freedesktop.DBus; member=GetNameOwner string "org.bluez" method ret
Re: Upgrade from Jessie to Stretch: Bluetooth mouse is not working.
helper snd_pcm86016 3 snd_hda_intel,snd_hda_codec,snd_hda_core snd_timer 28672 1 snd_pcm snd57344 13 snd_hda_intel,snd_hwdep,snd_hda_codec,snd_timer,snd_hda_codec_generic,snd_hda_codec_realtek,snd_pcm soundcore 16384 1 snd i2c_algo_bit 16384 1 i915 shpchp 32768 0 ac 16384 0 video 36864 2 samsung_laptop,i915 acpi_cpufreq 20480 1 button 16384 1 i915 parport_pc 28672 0 sunrpc249856 1 ppdev 20480 0 lp 20480 0 parport40960 3 lp,parport_pc,ppdev ip_tables 20480 0 x_tables 20480 1 ip_tables autofs436864 2 ext4 499712 3 crc16 16384 2 bluetooth,ext4 jbd2 77824 1 ext4 crc32c_generic 16384 0 fscrypto 24576 1 ext4 ecb16384 0 lrw16384 0 ablk_helper16384 0 cryptd 20480 1 ablk_helper aes_i586 20480 5 mbcache16384 4 ext4 xts16384 3 gf128mul 20480 2 lrw,xts algif_skcipher 20480 0 af_alg 16384 1 algif_skcipher dm_crypt 24576 1 dm_mod 94208 12 dm_crypt sd_mod 40960 3 ata_generic16384 0 psmouse 118784 0 ata_piix 32768 2 i2c_i801 24576 0 i2c_smbus 16384 1 i2c_i801 libata192512 2 ata_piix,ata_generic scsi_mod 180224 3 sd_mod,libata,sg uhci_hcd 40960 0 ehci_pci 16384 0 ehci_hcd 65536 1 ehci_pci usbcore 184320 6 uvcvideo,usbhid,ehci_hcd,uhci_hcd,btusb,ehci_pci usb_common 16384 1 usbcore r8169 77824 0 mii16384 1 r8169 fan16384 0 thermal20480 0 > > Notice the psmouse module. You'll hopefully have something > comparable for the bluetooth mouse. It may not appear until you > try to pair your mouse with bluetooth. I redirected lsmod when there was no BT mouse connection to file 1 and when it was connected to file 2. The "diff 1 2" gave this: user@localhost:~$ diff 1 2 2c2 < hidp 24576 0 --- > hidp 24576 1 46c46 < bluetooth 434176 40 btrtl,hidp,btintel,bnep,btbcm,rfcomm,btusb --- > bluetooth 434176 44 btrtl,hidp,btintel,bnep,btbcm,rfcomm,btusb 57c57 < evdev 20480 22 --- > evdev 20480 23 > Finally, there is a file in /etc called modules. Any > module whose name appears on a line in that file will be loaded > on boot. In my system the file only contains comments. > I used to have trouble on this system with sound from > the built-in sound chip set on the mother board. It would > usually be a no-show as sound card 0 and a usb sound card would > intermittently show up as card 0. By using /etc/modules to load > the sound module for the built-in card, it is always card 0. Should I add some module in my case to this file? > Use that feature carefully since modules you don't > actually need just waste resources. > > That should get you started with an afternoon of > head-scratching/banging as these things can be frustrating so > patience is a virtue. Patience I have. What I do not is the knowledge where to look and which dots to connect. Thanks for helping. Regards, Piotr
Upgrade from Jessie to Stretch: Bluetooth mouse is not working.
Dear all, Recently I upgraded from Jessie to Stretch in order to be able to install new package versions. The upgrade seems to be successful (I did not have any errors in the process), but I noticed that the Blue tooth mouse is not working (it was working fine in Jessie). I am using USB dongle for blue-tooth connections. I can pair the mouse and connect to it. However moving a mouse and/or clicking has no effect (cursor stays where it was, clicks are not recognized). I would include more info (output from some commands, logs), however I am not sure what is relevant, so I would need some guidance in this. Kind regards, Piotr -- System Information: Debian Release: 9.4 APT prefers stable APT policy: (500, 'stable') Architecture: i386 (i686) Kernel: Linux 4.9.0-6-686-pae (SMP w/2 CPU cores) Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8), LANGUAGE=en_US:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system)
Wheezy NFSv4 callback reply buffer overflowed
Hi, I've recently found on one of my servers, that kernel keeps complaining: NFSv4 callback reply buffer overflowed On the client side, system is: Wheezy 7.8 Kernel: SMP Debian 3.2.65-1+deb7u1 x86_64 GNU/Linux nfs-common 1:1.2.6-4 Device working as NFS server is NetApp FAS3250. Problem started just few days ago. Except for that annoying message, nfs storage seems to be working fine. I tired finding solution on-line but without any luck, I'd appreciate any help. Regards. -- Piotr Kweclich
Re: Wsparcie Debian 6.0.7 dla HP DL380p Gen8
W dniu 2013-05-24 08:59, KOMTECH - Bogdan Małecki pisze: Witam. Proszę o informację czy jest wsparcie Debian 6.0.7 dla HP DL380p Gen8. Zaoferowałem serwer w przetargu i zamawiający napisał: W wsparciu dla systemu operacyjnego ważne jest aby sterowniki do elementów serwera (np. macierzy dyskowej, karty sieciowej itp.) były albo „wbudowane” w system operacyjny, albo producent sprzętu je gwarantował. Oferta Pana firmy nie gwarantuje poprawnego działania sprzętu pod zaznaczonym systemem. Proszę o potwierdzenie informacji czy Debian 6.0.7 ma wbudowane sterowniki do poprawnego działania na serwerze HP DL380p Gen8 i czy uda się zainstalować ten system i czy nie będzie problemów z działaniem. Z góry dziękuję za pomoc. Pozdrawiam -- Bogdan Małecki Komtech Piotr Martuszewski Barbackiego 15 33-300 Nowy Sącz tel. 519 532 210, 018 5476852, 018 4437017 fax. 018 4423494 www.komtech.net.pl home.pl instaluje na tych serwerach swoje rozwiązania cloud https://homecloud.pl/technologie/platformy-serwerowe/hp-proliant-gen8/ na centosie lub debianie więc chyba się nada! PP -- To UNSUBSCRIBE, email to debian-user-polish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/51a5d0ed.3050...@ppt.pl
Re: Wsparcie Debian 6.0.7 dla HP DL380p Gen8
W dniu 24.05.2013 08:59, KOMTECH - Bogdan Małecki pisze: Witam. Allo! Może nie odpowiem na twoje pytanie ale... Proszę o informację czy jest wsparcie Debian 6.0.7 dla HP DL380p Gen8. Zaoferowałem serwer w przetargu i zamawiający napisał: W wsparciu dla systemu operacyjnego ważne jest aby sterowniki do elementów serwera (np. macierzy dyskowej, karty sieciowej itp.) były albo „wbudowane” w system operacyjny, albo producent sprzętu je gwarantował. Oferta Pana firmy nie gwarantuje poprawnego działania sprzętu pod zaznaczonym systemem. Mam wrażenie, że zamawiający będzie się czepiał szczegołów typu wbudowane w jądro a nie wkompilowane lub zainstalowane. To takie spostrzeżenie! Proszę o potwierdzenie informacji czy Debian 6.0.7 ma wbudowane sterowniki do poprawnego działania na serwerze HP DL380p Gen8 i czy uda się zainstalować ten system i czy nie będzie problemów z działaniem. Z góry dziękuję za pomoc. Pozdrawiam -- Bogdan Małecki Komtech Piotr Martuszewski Barbackiego 15 33-300 Nowy Sącz tel. 519 532 210, 018 5476852, 018 4437017 fax. 018 4423494 www.komtech.net.pl Piotr
Re: .deb / dpkg for dummies
At first, hello everyone - I subscribed yesterday. You know, every time since the beginning of my adventure with linux (about 1998) I get this message try man *. it's pointless you know? Every man who is familiar with linux is aware that there is something like manpages there. When someone ask for a tip then he is awaiting for a tip and not sentence which means in simply words - You're stupid, and you've got lice on your navel. In other words. I would like to read something simplified first, see some effects which can make me a _hero_ in my own eyes and _then_ go deeper (man pages in this case). Sorry, but manpages are long, complicated and discouraging for newbies. It's definitely better to recommend some simple web guide first. What develops curiosity in linux word is success IMO. Anyway.. Check manpage is like check google. When we're looking for answer, we can find only thousands of check google answers in google. That's the effect. No offence. That's only my opinion and I think it's like fight with windmills anyway. :) On Mon, Nov 28, 2011 at 8:51 AM, Alex Mestiashvili a...@biotec.tu-dresden.de wrote: On 11/27/2011 07:53 PM, Rogelio wrote: Is there a good overview on how to really use these tools? I simply copy/paste commands all the time, and I'm hoping for some sort of primer or tutorial that helps be able to do this from scratch without a cheat sheet. Hi , I think the simplest way to learn something is to look up a man page each time something isn't clear . The documentation is already on your system - man dpkg . Have a nice day , Alex -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ed33d77.90...@biotec.tu-dresden.de
Re: Zacinanie serwera, problem z dostępem.
Dnia 2011-11-17, o godz. 00:31:09 Mrugała Tomasz tomasz.mrug...@gmail.com napisał(a): ps. Zaczęło się po rozszerzeniu macierzy raid5(mdadm) do 6 dysków. Ale nie jestem pewien czy to jest powód. Załączam log z uruchomienia http://pastebin.pl/50428 Załączam smart z nowo dołączonego dysku(wiem że nie jest idealny ale chyba nie to jest problemem, mimo wszystko...) http://pastebin.pl/50429 Jakie informacje będą przydatne? Można mnie znaleźć: skype: cooleq, gg: 7535630 Cześć koleżko. Na wstępie - po kiego grzyba dodajesz do serwera niesprawny dysk twardy? Current_Pending_Sector=4 a więc 4 sektory mają problem z odczytem/zapisem danych, ale nie zostały jeszcze wyłączone z użytku, i dlatego mogą spowialniać pracę systemu operacyjnego. Aby się ich pozbyć (albo je naprawić), musisz wykonać skanowanie dysku, czego nigdy nie robiłeś, prawda? SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 100 Not_testing No, tak nigdy;) Zrób teraz wewnętrzny test SMART dysku, nie wymaga do restartu serwera, a dysk jest cały czas dostępny w czasie testu, test trwa kilkadziesiąt minut do paru godzin. Najlepiej wykonaj to na wszystkich swoich dyskach, bo nie wiadomo co tam masz. Później pokaż mi wyniki dysku raz jeszcze, zobaczymy, co powinieneś dalej z tym fantem zrobić. Dysk nie jest idealny, prawda, ale póki nie zaznaczysz na nim błędnych sektorów, aby były wyłączone z użytku, to ten dysk może się zacinać i spowalniać resztę komponentów. Powodzenia w naprawach;) Komenda na początek: smartctl --test=long /dev/sdc -- Regards, Piotr Drozdek -- To UNSUBSCRIBE, email to debian-user-polish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/2017234850.04fe20a1@pioruns-LIFEBOOK-S7010
Serwery i RAID 1
Allo! Mam 3 małe serwery produkcyjne: 2 x HP ML110 G5 1 x HP ML115 G5 wybór systemu padł na Ubuntu Server 11.04 na serwerach ML110 G5 jest zbudowana macierz RAID 1 sprzętowo. Softwareowo było wszystko OK a teraz podczas instalacji - instalator wykrywa macierz i zawiecha - cóż robić? -- _ http://www.piotrpatan.com mobile: +48 501 150 557 GG: 14216 -- To UNSUBSCRIBE, email to debian-user-polish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4e7c4d20.8020...@ppt.pl
Re: Update/upgrade produkcyjnych serwerów - co proponujecie?
W dniu 2011-05-19 11:14, Konrad Szeromski pisze: Etch już nie jest wspierany, więc radzę upgrade do co najmniej Lenny. Polityka jest taka, że najpierw zrób zrzut całości - musi być ZAWSZE możliwość powrotu do stanu pierwotnego. ...że się tak podepnę :) Czego używacie (radzicie używać) do robienia szybkich, łatwych i przyjemnych (także w przywracaniu) zrzutów systemu (konkretnie Debiana)? Clonezilla Live i backup na dysk sieciowy :) http://clonezilla.org/ -- Pozdr. Piotrek Najduk. -- To UNSUBSCRIBE, email to debian-user-polish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4dd4e923.9090...@dami.pl
Re: Partycje 3TB
Dnia 2011-03-16, o godz. 20:11:21 Raf Czlonka r...@linuxstuff.pl napisał(a): Czy istnieje jakis system plikow, ktory radzi sobie z w/w awariami znakomicie? Na pewno nie będzie to (na tą chwilę przynajmniej) - tak zachwalany - BTRFS, do którego nie opracowano jeszcze działającego narzędzia do sprawdzania i naprawy systemu plików;) -- Regards, Piotr Drozdek -- To UNSUBSCRIBE, email to debian-user-polish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110317194801.304a8799@debian
Re: Menu GRUB-a
Dnia 2011-03-16, o godz. 13:45:31 Lech Pankowski lp...@uwb.edu.pl napisał(a): Kłaniam się.Na jednym komputerze jest zainstalowane Win2k (...) Na komputerze z Windows XP wpisz z konsoli roota: update-grub -- Regards, Piotr Drozdek -- To UNSUBSCRIBE, email to debian-user-polish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110316175649.2ca76b90@debian
Re: Bug w reportbug - debian testing
Dnia 2011-02-17, o godz. 08:01:40 kuLa deb...@kulisz.net napisał(a): Hej a próbowałeś, użyć tylko linii poleceń bez graficznej nakładki? Bo o ile się nie mylę to używasz jakiegoś ui. Jeśli nie pójdzie z linii poleceń istnieje jeszcze możliwość wysłania raportu za pomocą maila lub bezpośrednio przez stronę www. Poniższy link powinien nieco pomóc: http://www.debian.org/Bugs/Reporting Dziękuję za zainteresowanie. Udało mi się wysłać raport dotyczący pierwotnego problemu - Banshee. Ustawiłem reportbug na używanie trybu konsolowego, zamiast Pythona + GTK. Niebawem skompletuję dane i wyslę raport dotyczący powyższych błędów reportbug. Pozdrawiam -- To UNSUBSCRIBE, email to debian-user-polish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110217142622.064300d0@debian
Bug w reportbug - debian testing
. Używam systemu testing, kernel oraz sterownik nvidia-glx mam z repozytorium experimental (repozytorium experimental i unstable dodane z najniższym priorytetem apt pin). Domyślne Gnome+metacity. Jeśli jeszcze jakieś dodatkowe komendy będę musiał podać wykonać, to proszę pisać. Pozdrawiam Piotr Drozdek -- To UNSUBSCRIBE, email to debian-user-polish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110216225631.65930e9e@debian
Re: Bug w reportbug - debian testing
Udało mi się uzyskać jeszcze inny kod błędu: $ reportbug /usr/lib/pymodules/python2.6/reportbug/ui/gtk2_ui.py:476: PangoWarning: shaping failure, expect ugly output. shape-engine='BasicEngineFc', font='DejaVu Sans 9', text='' gtk.main () /usr/lib/pymodules/python2.6/reportbug/ui/gtk2_ui.py:476: PangoWarning: pango_layout_set_width: assertion `layout != NULL' failed gtk.main () /usr/lib/pymodules/python2.6/reportbug/ui/gtk2_ui.py:476: PangoWarning: pango_layout_get_extents: assertion `layout != NULL' failed gtk.main () /usr/lib/pymodules/python2.6/reportbug/ui/gtk2_ui.py:476: PangoWarning: pango_layout_get_line_count: assertion `layout != NULL' failed gtk.main () Błąd w obliczeniach zmiennoprzecinkowych Tym razem przeszło Continue - nazwa pakietu - Is reportbug actually the package you are having problems with? - Tak - koniec. -- To UNSUBSCRIBE, email to debian-user-polish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20110216233233.26aed756@debian
Re: Audacious błað
Dnia 2011-01-30, nie o godzinie 09:41 +, Imtheone pisze: W dniu 28.01.2011 17:17, Krystian Włosek pisze: W dniu 28 stycznia 2011 16:19 użytkownik Imtheoner...@toya.net.pl napisał: Witam dziś znalazłem błąd w pakiecie audacious który powoduje zawieszenie serwera X lecz nie umiem go dokładnie opisać. Specjalny plik mp3 dodany do odtwarzacza audacious w wersjach testowanych( 2.3-2, 2.1-0 ) powoduję zapętlenie odtwarzacza i przeciążenie serwera xorg. Nie posiadam logów lecz posiadam plik który umożliwia odtworzenie błędu. Imtheone, Dzięki za tą informację. Czy mógłbyś dokładniej opisać problem oraz udostępnić ten plik mp3? To pozwoli na zgłoszenie błędu bezpośrednio do deweloperów Debiana. Po dokładniejszym zbadaniu błędu stwierdzam że problem dotyczy samego odtwarzacza, nie znam dokładnej mechaniki błędu lecz bardzo bym prosił o dokładne zbanie i złoszenie problemu. http://rapidshare.com/files/444984481/xxx.mp3 - Plik udostępniam w celu lokalizacji błędu. Napisz po kolei co zrobiłeś. Otworzyłeś Audacious, załadowałeś plik, Audacious od razu się zawiesił, tak? -- To UNSUBSCRIBE, email to debian-user-polish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/1297015881.5582.0.camel@pioruns-machine
Brak sieciówek
Witam, Miałem wirtualną maszynę z Debianem postawioną na VMWare ESX, zmuszony byłem ją przenieść na inny serwer VMware z powodu braku miejsca. Po przeniesieniu maszyny na drugi serwer VMWare ESXi uruchomieniu okazało się, że zniknęła mi karta sieciowa z systemu Debian. Komenda ifconfig wypisuje tylko loopback. Komenda lspci wyświetla spis urządzeń, wśród których widnieje sieciówka, ale w systemie jej nie widzę. Co mogło się stać i jak to można naprawić ? Pozdrawiam -- Piotr
Debian plus VMware
Witam, Mam serwer na którym postawiono jakiś czas temu serwer VMware vSphere 4 Essentials (zawiera w sobie ESX i ESXi). Na tym postawiono kilka maszyn między innymi mojego Debiana z 4GB Ramu. Potem powstały kolejne maszyny na tym. Wszystko działało ok. do momentu aż trzeba było do mojego Debiana dołożyć 4GB RAM. Zatrzymałem więc system, administrator dołożył skonfigurował w VMWare dodatkowe 4GB RAM czyli teraz mam 8GB. Uruchomiłem maszynę, oczywiście zobaczyła tylko 4GB RAM ze względu na wersje jądra, zainstalowałem więc apt-get wersję kernela BIGMEM i myślałem że sprawa załatwiona. Okazało się jednak, że po dołożeniu tego RAM czas dostępu do dysku na tej wirtualnej maszynie z moim Debianem jest katastrofalny. Pliki kopiuje mi z prędkością około 2-5MB/sek. Myślałem że coś się podziało po zmianie kernela więc ustawiłem żeby wstało na poprzedniej wersji jądra w /boot/grub/menu.list i zrobiłem restart systemu. Niestety na poprzedniej wersji jądra jest to samo dostęp do dysku nie do przyjęcia. Macie pojęcie co się mogło stać ? Czy w debianie mogło się coś pochrzanić ? Czy VMWare, mógł coś zepsuć ? Pozdrawiam -- Piotrek
Postfix, roundcup
Witam serdecznie! Szukam rozwiązania, aby użytkownicy w firmie nie ściągali poczty z hostingu za pomocą programów pocztowych. Chciałbym, aby poczta była ściągana na serwerek, i np za pomocą roundcup'a ludzie mieli do niej dostęp. Dodatkowo chciałbym prowadzić logi poczty odbieranej/wysyłanej oraz aby wiadomości pocztowych nie można było kasować. Prosiłbym ewentualnie o wskazówkę za pomocą jakich narzędzi wykonać coś takiego, postfix + roundcup, czy może jeszcze w połączeniu z fetchmail? -- To UNSUBSCRIBE, email to debian-user-polish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Re: Postfix, roundcup
Devecop? Marcin Kasperski pisze: Szukam rozwiązania, aby użytkownicy w firmie nie ściągali poczty z hostingu za pomocą programów pocztowych. Chciałbym, aby poczta była ściągana na serwerek, i np za pomocą roundcup'a ludzie mieli do niej dostęp. Dodatkowo chciałbym prowadzić logi poczty odbieranej/wysyłanej oraz aby wiadomości pocztowych nie można było kasować. Prosiłbym ewentualnie o wskazówkę za pomocą jakich narzędzi wykonać coś takiego, postfix + roundcup, czy może jeszcze w połączeniu z fetchmail? A czemużby nie użyć po prostu jakiegoś serwera IMAP (bez POP3)? -- Andrzej Pietrasz Administrator -- To UNSUBSCRIBE, email to debian-user-polish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Re: Jaki laptop ?
Powinno śmigać, intel intensywnie wspiera obsługę swoich chipsetów w jądrze. Jakby coś nie działało, to zawsze możesz skompilować swój kernel waniliowy, bądź zainstalować z backportów. Poza tym w repo debiana są do dyspozycji zamknięte sterowniki od ATI, więc i obsługa 3d będzie:) pozdro Tomasz Suchodolski pisze: Daj znac czy sie zdecydowales i opisz wrazenia w pracy na matrycy fullHD. Musze zaznaczyc ze o 1 - 2 punkty bedziesz musial zwiekszyc wielkosc czcionek, ale to kosmetyka. Std wilkosc fontow w debianie jest nieco za mala do tej rozdzielczosci. -- Grzegorz Kolorz 'kAjKo' Witam, Z Dellem M65 raczej nie wyjdzie, zatem moim faworytem jest Lenovo ThinkPad T500 NJ28XPB z grafiką ATI Mobility Radeon HD 3650 Czytałem recenzję tego sprzętu i wydaje się być bardzo cichy. Pytanie tylko jak pod Debianem. Posiada ktoś może taką maszynę ? -- Tomasz Suchodolski -- Andrzej Pietrasz Administrator -- To UNSUBSCRIBE, email to debian-user-polish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
HP NETRAID-1Si
Witam serdecznie! Czy ktoś z Was instalował debiana na kontrolerze RAID HP NETRAID-1Si?. Otóż problem jest taki, że podczas instalacji debian wogóle nie widzi dysków podłączonych do tego kontrolera. Próbowałem juz wgrywać podczas instalacji inne stery z dyskietki i nic... . Z tego co wygooglowałem, to w użygiu powinny być sterowniki i2o i megaraid. W swoim biosie kontroler ma włączoną emulację jako kontroler I2O... -- To UNSUBSCRIBE, email to debian-user-polish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Re: Podsieć
Witam. Aleksander Kurczyk pisze: Mógłbyś podać mi jeszcze parę linków do stron, po których przeczytaniu będę znał odpowiedź na nurtujące mnie pytanie??? Do czego podłączony jest router na samej górze. Wiem że jest on podpięty do innych routerów na górze... Jaki jest wtedy jego IP, z podsieci routera do którego jest podpięty??? Jak RIPE przydziela komputerom/routerom podsieci, po MACach??? Dlaczego ja wymyślę sobie podsieć publicznych adresów IP i ją ustawię, ona nie działa??? Wiem że muszę mieć pozwolenie od RIPE... W jaki sposób oni umożliwiają jednym korzystanie z podsieci, a innym nie??? To ja jeszcze wtrącę swoje 5gr :) Ripe stosuje tzw. systemy autonomiczne (ASy). Używają tego ISPy w protokole BGP (protokół rutingu dynamicznego). Do takiego ASa Ripe przydziela adresację np. 256 adresów (mniejszych sieci przyjęło się nie dawać). Tak więc jako końcowy ISP nawiązujesz połączenie z sąsiadem a on wie z jakim systemem autonomicznym współpracuje i jakie adresy możesz ogłaszać światu (Baza Ripe). Tak więc Ty jako końcowy user nie uczestniczysz w BGP. Możesz sobie ustawiasz co chcesz ale to nie będzie działać. Albo będzie działać tylko u Ciebie ale nie w Internecie. Jakbyś chciał mieć swoje IP to zgłaszasz się do Ripe, otrzymujesz ASa, otrzymujesz swoje adresy IP. Potem wykupujesz łącze np. od TP z usługą tzw Global Access. Podajesz w umowie numer swojego ASa. Na ruterze na którym terminujesz to łącze zestawiasz sesje BGP do TP. Rozgłaszasz w BGP IPki które dostałeś z RIPE i wtedy to działa. To najprostszy przykład. Scenariuszy podłączeń jest wiele. Tu podałem, że wykupujesz łącze. Ale załóżmy, że Ty jesteś właścicielem dżej sieci i to od Ciebie będą kupować łącze... Mając już ASa granice między końcowym użytkownikiem a dostawcą mogą się zacierać :) Pozdr. PN. -- To UNSUBSCRIBE, email to debian-user-polish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Re: Podsieć
Thx Jeszcze jedno, jak są połączone końcowe routery ISP??? Wiem że są połączone z routerami innych ISP. Ale w jaki sposób do portu WAN i na drugim routerze do portu LAN??? I wtedy pierwszy ISP ma kilka ipków z różnych sieci??? Na poziomie ISP zaciera się coś takiego jak port LAN i WAN. Poza tym stosowane są różne technologie łączenia ISP. To jest temat rzeka. Żeby zrozumieć jak działa Internet trzeba poznać protokoły rutingów stosowane przez ISP. Przede wszystkim BGP. Zobacz, ze dany ISP może mieć kilkanaście połączeń z różnymi sieciami a do danej konkretnej sieci też może mieć kilka połączeń. A coś musi podejmować decyzje jak kierować ruchem. Tym właśnie zajmują się protokoły zaawansowanego rutingu sieciowego które są implementowane w ruterach ISP. U siebie w domu masz temat prosty. Dostajesz IPka od ISPa i na serwerze/ ruterze masz ustawione ze wszystko - caly ruch od siebie - kierujesz do tego dostawcy. Stosujesz tak zwany ruting statyczny. Natomiast dalej to ISP martwi się co z tym ruchem od Ciebie zrobić. Reasumując nie możesz swoich doświadczeń z siecią przenosić na grunt ISP tam są inne reguły gry :) Bardzo ciekawe zresztą :) Pozdr. PN. -- To UNSUBSCRIBE, email to debian-user-polish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Re: Jaki CMS wybrać?
Rafał Radecki pisze: Witam wszystkich. Chciałbym wykorzystać jakiś przyjazny w obsłudze CMS. Co moglibyście poradzić i dlaczego? Z góry dzięki za pomoc, R. Fajne są także http://www.typolight.org http://www.cmsmadesimple.org/ choć się dość różnią są łatwe i szybkie -- Witam serdecznie! Pozdrawiam Piotr Patan ___ +48 501 150 557 -- To UNSUBSCRIBE, email to debian-user-polish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Re: Jak działa internet po kablówce?? ?
Witam. Aleksander Kurczyk pisze: Witam Wiem pomyliłem listy:) Jak dostarczany jest internet po kablówce??? Po stronie użytkownika jest modem zamieniający sygnał analogowy (koncentryk) na cyfrowy (skrętka). Transmisja dokonywana jest w standardzie EuroDOCSIS lub DOCSIS. Zależy od dostawcy na jakie zdecydował się urządzenia. Jest to transmisja cyfrowa. Co jest po drugiej stronie kabla??? U abonenta jest modem kablowy a w kablówce ruter kablowy. -- Pozdr. Piotrek Najduk. -- To UNSUBSCRIBE, email to debian-user-polish-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Re: NFS i prawa usera
On Sun, 1 Feb 2009, Rafal Czlonka wrote: Krzysztof Zubik wrote: Czy moze chodzi o ustawienie w prawach dostepu do katalogu chmod bitu lepkosci inaczej sticky bit. W ktores ksiazce przeczytalem, ze ustawienie tego bitu umozliwia zapis i jednoczesnie uniemozliwia usuwanie. Jeśli jesteś włąścicielem pliku to i tak możesz go usunąć. Tak jest na przykład z /tmp. Nie do końca masz rację. Musisz mieć prawa w i x do katalogu, żeby usunąć plik. Wtedy nie musisz być właścicielem pliku aby go usunąć. /tmp jest wyjątkiem gdyż ma 'sticky bit'. PK
Re: Certyfikat dla firmy
Dnia Thu, 13 Nov 2008 22:43:39 +0100 tower [EMAIL PROTECTED] napisał(a): Witam Moze ktoś podrzucic linka do jakiegos składnego faq nt. prawidlowego generowania certyfikatu SSL? Konczący sie certyfikat był wygenerowany z wildcardem *.firma.pl w polu common name, co ponoc jest bledem. Witryn, webmaili i calej reszty jest troche, wiec poprzedni admin skorzystał z '*'. Jak powinien wygladac poprawny zapis? Wiem, że to już bedzie raczej OT, ale do jakiej instytucji certyfikujacej sie najlepiej zwrócic o podpis i jak wyglada taka procedura? Pozdrawiam! Ja kupowałem niedawno u nich http://ssl.certum.pl/certyfikaty/main.xml Brałem właśnie certyfikat Wildcard o którym piszesz. Wszystko sprawnie i bez zbędnych ceregieli - masz instrukcje do pobrania co po kolei trzeba robić. Pozdrawiam Piotr Chylewski -- mailto: chyles (at) co (dot) bydgoszcz (dot) pl -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Drukarka laser-mono
Dnia Mon, 6 Oct 2008 20:33:17 +0200 Wojciech Ziniewicz [EMAIL PROTECTED] napisał: Ktorykolwiek HP laserjet , ja uzywam 1200. Wszystkie HP maja swietne wsparcie driverowe, Z doświadczenia wiem, że lepiej kupić starą drukarkę HP LaserJet 1200 lub 1100 niż nową 1010, 1020 czy 1018... Tonery 12A są bardzo nieekonomiczne, a poza tym wytrzymałość - modele 1100 i 1200 oprócz wymiany separatorów są nie do zajechania, a już mistrzostwo w tym względzie ma HP 2100. Wsparcie dla Linuksa jest świetne. Pozdrawiam Piotr Chylewski -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: awk, sed
Dnia środa, 10 września 2008 10:21, [EMAIL PROTECTED] napisał: Witam wszystkich, Ma może ktoś przykład, który zamieni w pliku znak na spacje. Z góry dziękuje za pomoc. -- Z poważaniem, Paweł Lalewicz Może tak: cat plik.txt | sed s/\/ /g plik.kopia.txt Pozdrawiam -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Lenny stable
Witam listę debian-user-polish, Kiedy ukaże się stabilny Lenny? Wg informacji ze strony: http://bugs.debian.org/release-critical/ trzeba będzie zaczekać, aż liczba bugów dla wydania Lenny, spadnie do zera (na razie jest: Number concerning the next release: 356). Czy to prawda? -- pozdrawiam, Piotr Drozdek, JID: pioruns(at)jabster.pl _,.-'~'-.,__,.-'~'-.,__,.-'~'-.,__,.-'~'-.,__,.-'~'-.,_ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
gg ja to zrobic
mam problem jak zrobic agy odblokowac czyjes gg co do mnie. czy mozesz mi pomoc? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Logowanie - powiadamianie na maila/sms
Dnia Mon, 26 May 2008 00:24:22 +0200 Capadona [EMAIL PROTECTED] napisał(a): Witam Macie jakies sprawdzone sposoby na powiadamianie o logowaniu na swoich maszyach ??? przezylem ostatnio wlama przez dziure w ssh i nie chce by sie to powtorzylo, wylaczylem wszystko co sie dalo ale dla pewnosci chcialbym cos tkaiego jeszcze zrobic. z gory thx za odpowiedzi i naprowadzenie na odpowiedni soft Pozdrawiam, Michał Matuszak [EMAIL PROTECTED] http://www.canabio.pl witam u mnie znakomicie się sprawdza dopisanie do /etc/profile: date=`date +%y.%m.%d` echo logowanie $USER $date | mail -s logowanie na konto $USER [EMAIL PROTECTED] a czy mógłbyś powiedzieć na czym polegała ostatnia dziura? (tak z ciekawości pytam, może jakiś link z opisem?) Pozdrawiam Piotr Chylewski -- mailto: chyles (at) co (dot) bydgoszcz (dot) pl -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Samba - PDC - profile mobilne
W liście nadanym Tue, 19 Feb 2008 14:26:47 +0100 Albert Czarnecki [EMAIL PROTECTED] pisze: Witam Komuś się udało zmusić sambę i winxp aby działały profile mobilne? Owszem, u mnie działa. Co opis to coś nowego i jak nie działało to dalej nie działa , przy logowaniu użytkownik dostaje informacje ze niby profil istnieje ale nie jest jego właścicielem, na serwerze natomiast nic nie ma nic nie było kopiowane. W dokumentacji: http://pl.samba.org/samba/docs/man/Samba-HOWTO-Collection/ProfileMgmt.html jest taki akapit: Windows XP Service Pack 1 There is a security check new to Windows XP (or maybe only Windows XP service pack 1). It can be disabled via a group policy in the Active Directory. The policy is called: Computer Configuration\Administrative Templates\System\User Profiles\ Do not check for user ownership of Roaming Profile Folders This should be set to Enabled. Does the new version of Samba have an Active Directory analogue? If so, then you may be able to set the policy through this. If you cannot set group policies in Samba, then you may be able to set the policy locally on each machine. If you want to try this, then do the following: 1. On the XP workstation, log in with an administrative account. 2. Click on Start - Run. 3. Type mmc. 4. Click on OK. 5. A Microsoft Management Console should appear. 6. Click on File - Add/Remove Snap-in - Add. 7. Double-click on Group Policy. 8. Click on Finish - Close. 9. Click on OK. 10. In the “Console Root” window expand Local Computer Policy - Computer Configuration - Administrative Templates - System - User Profiles. 11. Double-click on Do not check for user ownership of Roaming Profile Folders. 12. Select Enabled. 13. Click on OK. 14. Close the whole console. You do not need to save the settings (this refers to the console settings rather than the policies you have changed). 15. Reboot. Bez tego windowsy XP odmawiają współpracy z profilami. Pozdrawiam, Piotr A. Dybczyński Information from NOD32 This message was checked by NOD32 Antivirus System for Linux Mail Servers. part000.txt - is OK http://www.eset.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Nautilus - problem z montowaniem.
W liście nadanym Sun, 27 Jan 2008 19:53:51 +0100 [EMAIL PROTECTED] pisze: Chodzi o to, żeby zwykły użytkownik (nie mający uprawnień root-a, ani nie mający pojęcia o konsoli) mógł zamontować partycję, najlepiej w taki sposób jak to jest zrobione w Ubuntu (tam nie ma nawet żadnych wpisów w /etc/fstab dotyczących tych partycji). W ubuntu jest pewnie wrapper, który mount puszcza przez gtksu. Spróbuj opisać partycje w fstab, dodając opcje user (man mount), np u mnie dla Pendrve-a jest tak: /dev/sda/media/dev_sda autorw,user,noauto,noatime 0 0 Pozdrawiam, PAD -- / Dr Piotr A. Dybczynski, Astronomical Observatory, A.Mickiewicz University Sloneczna 36,60-286 Poznan,POLAND,tel+48.618292784,e-mail: [EMAIL PROTECTED] **PAD***/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: procmail
W liście nadanym Wed, 30 Jan 2008 12:48:02 +0100 (CET) [EMAIL PROTECTED] pisze: Czy procmail moze tworzyc brakujace katalogi? Chodzi o sytuacje, w ktorej w pliku .procmailrc znajduje sie regula np.: :0: * ^X-Spam-Flag: YES $MAILDIR/.Spam/ ale katalog .Spam nie istnieje. U mnie regułka: :0 * ^Subject:.*(*SPAM*) Spam brakujący katalog Spam tworzy. Pozdrawiam, PAD -- / Dr Piotr A. Dybczynski, Astronomical Observatory, A.Mickiewicz University Sloneczna 36,60-286 Poznan,POLAND,tel+48.618292784,e-mail: [EMAIL PROTECTED] **PAD***/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Suma kontrolna 4.0 r2
Popołudniem 2008-02-01 (piątek) Jaroslaw napisał: (...) Bo ja miałem podobny problem (suma była różna za każdym razem)... Okazało się po badaniach, że dysk jest uszkodzony (i to tak paskudnie, że ciężko to było wykryć). Ja też proponuję Ci sprawdzić dysk. Zapisz dane S.M.A.R.T, przejedź go calutkiego np. programem Spinrite 5, i znów porównaj dane smart. Muszę jeszcze raz zaczynać wszystko od początku, czy istnieje możliwość obejścia owej niedogodności? Pobierz obrazy przez jigdo. Powodzenia :) -- pozdrawiam, Piotr Drozdek, jid: pioruns(at)chrome.pl _,.-'~'-.,__,.-'~'-.,__,.-'~'-.,__,.-'~'-.,__,.-'~'-.,_ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Suma kontrolna 4.0 r2
Dnia piątek, 1 lutego 2008 18:26, (Na)Leśnik napisał: Witam. Zassałem już dwukrotnie obraz drugiej płyty DVD Debiana 4.0 r2 dla i386 (torrent, używałem Azureusa). Za każdym razem, przy sprawdzaniu, dostaję inną sumę kontrolną od tej podanej na stronie. Miał ktoś taki problem, czy tylko mnie takie szczęście spotkało? Muszę jeszcze raz zaczynać wszystko od początku, czy istnieje możliwość obejścia owej niedogodności? -- Pozdrowionka z buszu (Na)Leśnik W programie ktorrent jest taka opcja sprawdź poprawność danych - pozwala ona odrzucić błędnie ściągnięte kawałki i zassać je ponownie. Może jest taka opcja i w Azureus. Pozdrawiam.
emacs+iso-88591+iso-8859-2 in text console
Hello list, The subject says everything. I would like to use emacs in text console (i.e. not in X) and be able to use both European charcater sets: iso-8859-1 and iso-8859-2. Apparently it is possible to combine two console fonts but I never managed to do that and make emacs use such combination. Obviously I would prefer to use utf-8 encoding in emacs but any other solution is welcome Thanks in advance for any ideas Piotr -- -- Piotr Kopszak, Ph.D. Polish Art Gallery, National Museum in Warsaw -http://kopszak.mnw.art.pl/ http://www.magnatune.com/artists/altri_stromenti -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: MySQL - jak zatrzymać select * from
On Thu, 6 Dec 2007, Jarek Buczyński wrote: Może w takim razie \P pomoże. mysql select * from Table\P; Default pager wasn't set, using stdout. Gdzie mogę to ustawić? mysql \P less PAGER set to less mysql Pozdrowienia, Piotr Konieczny
Re: Proftpd + ssh
On Tue, 23 Oct 2007, Marek Zdybel wrote: Czy ktoś może mi podpowiedzieć w jaki sposób mogę dodać szyfrowanie do serwera ftp ProFTP? Poczytaj o opcji TLSEngine i innych zaczynających się od TLS. Piotr Konieczny
More trouble with DFS
On Tue September 11 2007 4:55:36 am Piotr Kopszak wrote: Hello, I'm trying to get Xwindows going on a live etch CD I prepare using dfsbuilt on recent etch. In my dfs.cfg I added the following packages: x-window-system-core xorg larswm The CD builds OK. It runs fine in text mode however when I try to start Xwindows it complains about inaccessible /var/log directory and quits. Any ideas? It probably wants to be able to write to that directory. There is a line in dfs.cfg where you can list the files/dirs that you will want to put on the ramdisk instead of on the CD. That solved the problem quickly, and Xorg runs fine to my content. I wanted also to install Polish console fonts and localization. When I try to install the package fonty it tries to install console-common which fails. Actually, the question is more general. What are the option when a package fails to install? Another question. Is there any way I can choose locales which should be built by default for the live CD? Piotr -- Piotr Kopszak, Ph.D. Polish Art Gallery, National Museum in Warsaw -http://kopszak.mnw.art.pl/ http://www.magnatune.com/artists/altri_stromenti -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Mysqli
On pon, 10/09, 21:58:19, Gajosew wrote: Teraz migruje na debiana i brakuje mi niestsety pewnej rzeczy Ubuntu posiadal pakiet mysqli dla mysql5 i php5 . W debianie takowego nieznalazlem. Wie ktoś jak to obejsc. Niespecjalnie interesuje mnie samodzielna kompilacja. Albo migrujesz na jakąs archiwalną dystrybucję Debiana, albo słabo szukałeś. www:/# dpkg -L php5-mysql | grep mysqli /etc/php5/conf.d/mysqli.ini /usr/lib/php5/20060613/mysqli.so www:/# cat /etc/issue Debian GNU/Linux 4.0 \n \l -- Piotr 'QuakeR' Gasidło, BOFH @ pandora.barbara.eu.org ## sending lusers to /dev/null since 1998 # Waiting for tomorrow, for a little ray of light ### Waiting for tomorrow just to see your smile again signature.asc Description: Digital signature
Xorg on dfsbuilt live CD
Hello, I'm trying to get Xwindows going on a live etch CD I prepare using dfsbuilt on recent etch. In my dfs.cfg I added the following packages: x-window-system-core xorg larswm The CD builds OK. It runs fine in text mode however when I try to start Xwindows it complains about inaccessible /var/log directory and quits. Any ideas? Piotr -- -- Piotr Kopszak, Ph.D. Polish Art Gallery, National Museum in Warsaw -http://kopszak.mnw.art.pl/ http://www.magnatune.com/artists/altri_stromenti -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PPPD
On Thu, 6 Sep 2007, Arkadiusz Krysiak wrote: Problem w tym że to konfigurowałem. niestety totalny olew jeśli chodzi o sygnał dzwonienia. Już z lekka zgłupłem. czy jest jakaś opcja wymuszająca by mgetty podniósł słuchawkę? -n - liczba dzwonków po ilu ma podnieść. Poza tym spróbuj zmusić go do pokazywania większej ilości informacji (-x). Modem jest na pewno sprawny? Ostatnio miałem taki problem jak modem się zawiesił i trzeba było go przestartować (modem zewnętrzny). Jeśli to wewnętrzny to zacząłym od restartu maszyny. Pozdrowienia, Piotr Konieczny
Re: PPPD
On Tue, 4 Sep 2007, Arkadiusz Krysiak wrote: czy ktoś pamięta jak toto się konfiguruje? jeśli tak to mam pytankNie wiem co robię źle ale nie odbiera mi połączeń przychodzących. Jak go zmusić do odebrania połączenia przychodzącego. Nie reaguje na rington. gdzie mu ustawić coby zaczął? Hmmm... ja zawsze stawiałem mgetty do odbierania połączeń. Pozdrowienia, Piotr Konieczny
Re: OpenVZ / Linux-Vserver
On śro, 05/09, 14:58:19, Wojciech Ziniewicz wrote: (...) Ja poszedłęm w virtualserver , postawiłem na tym kilka maszyn a teraz mam duuuzy ból zeby z tego wrócic... w vserverze np. nie działa BIND9 ;) wyśmienicie.. i kikla innych patentów ... Duży ból? Tzn. jest do niczego i mam problem aby to przemigrować na coś innego? Czy może tak mi się podoba, że boli przy migracji na coś innego bo są jakieś niedoróbki. Jak czytałem, to migracja z VServera do OpenVZ (który posiada dodatkowo całkowicie zwierualizowany stos sieciowy) to kwestia upgrade kernela i dopisania konfiuracji samego OpenVZ. Co do BINDa: http://linux-vserver.org/Problematic_Programs -- Piotr 'QuakeR' Gasidło, BOFH @ pandora.barbara.eu.org ## sending lusers to /dev/null since 1998 # Waiting for tomorrow, for a little ray of light ### Waiting for tomorrow just to see your smile again signature.asc Description: Digital signature
Re: LVM
On Wed, 5 Sep 2007, albert wrote: Testuje dzialanie lvm i na poczatek zrobilem sobie partycje 30GB potem przy uzyciu lvresize dodalem 10G lvdisplay pokazuje lvdisplay [...] robie mount /dev/vol1/virtualki /mnt a on mi pokazuje po staremu 30GB jak mu zrobie od nowa mkfs.ext3 /dev/vol1/virtualki i zamontuje to jest ok No ale jak cos juz tam wrzuce to niebede od nowa zakladal systemu plikow Moze niewykonuje jakiegos updatu zeby system zobaczyl nowy rozmiar? resize2fs Piotr Konieczny -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Komputery serwerowe
Alan Krasiński napisał(a): Witam, zacząłem się roglądać za kupnem jakiegoś konkretnego serwera. Zauważyłem, że dyski jakie aktualnie się w takich rozwiązaniach stosuje to sataII i ram ddr2. Czy podzespoły te są identyczne z rowiazaniami w komputerach desktopowych. Jeśli mam sataII to moge sobie do takiego serwera bezproblemowo zainstalować ?? Pozdrawiam Dyski tak, ale nadal sa w uzyciu dyski scsi oraz nowe sas Pamieci to raczej sa specjalne buforowane ECC sporo drozsze niz inne PAMPKIN -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Komputery serwerowe
Alan Krasiński napisał(a): Np takie oznaczenie które daje HP: 120Gb 1.5G SATA 5.4K Co w tym oznaczeniu oznacza to 1.5G bo reszta rozumiem 5400 obrotów dysk sata pojemność 120Gb. Oznacza to dysk I generacji SATA i jego transfer PAMPKIN Alan Krasiński napisał(a): Witam, zacząłem się roglądać za kupnem jakiegoś konkretnego serwera. Zauważyłem, że dyski jakie aktualnie się w takich rozwiązaniach stosuje to sataII i ram ddr2. Czy podzespoły te są identyczne z rowiazaniami w komputerach desktopowych. Jeśli mam sataII to moge sobie do takiego serwera bezproblemowo zainstalować ?? Pozdrawiam Dyski tak, ale nadal sa w uzyciu dyski scsi oraz nowe sas Pamieci to raczej sa specjalne buforowane ECC sporo drozsze niz inne PAMPKIN __ NOD32 Informacje 2446 (20070809) __ Wiadomosc zostala sprawdzona przez System Antywirusowy NOD32 http://www.nod32.com lub http://www.nod32.pl -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Linux-Vserver i mount - permission denied
Kiedyś na grupie pisałeś że dla celów testowych uruchomiłes rownież openvz, jak sie to sprawdza? Lepiej działa to od linux-vserver? Działał tylko kilka godzin podczas których testowałem jego możliwości. Więc nie mogę podać dokładnie czy jest lepszy do zastosowań praktycznych. Mam na liście TODO jeden leciwy serwer to przeinstalowania, więc spróbuje na nim postawić OpenVZ. -- Piotr 'QuakeR' Gasidło, BOFH @ pandora.barbara.eu.org ## sending lusers to /dev/null since 1998 # Waiting for tomorrow, for a little ray of light ### Waiting for tomorrow just to see your smile again signature.asc Description: Digital signature
Re: Linux-Vserver i mount - permission denied
On śro, 25/07, 12:12:20, Albert Czarnecki wrote: Witam Proboje wykonac cos takiego na serwerze postawionym jako virtualna maszyna na linux-vserver mount --bind /var/run/mysqld/ /var/spool/postfix/var/run/mysqld/ mount: permission denied Dlaczego dostaje permission denied, oczywiscie robie to z roota , da sie to jakos obejsc? Wydaje mi się ze musisz dopisać do pliku /etc/vservers/vserver/ccapabilities linię SECURE_MOUNT. Nie testowałem ;-) Ogólnie lepszym rozwiązaniem będzie zrobienie twardego linka zapewne socketu mysql do odpowiedniego katalogu postfixa. -- Piotr 'QuakeR' Gasidło, BOFH @ pandora.barbara.eu.org ## sending lusers to /dev/null since 1998 # Waiting for tomorrow, for a little ray of light ### Waiting for tomorrow just to see your smile again signature.asc Description: Digital signature
Re[3]: Debian 4.0 z Intel ISP-2150G + Adaptec RAID 2100S
Witam serdecznie! W liście napisano: 18-07-07, Linuks pytania [EMAIL PROTECTED] napisał(a): Jak Ty to znalazłeś to nie wiem ;-) Hmmm, problem z 2003 roku i po 4 latach znowu goście o nim piszą. Zrozumiałem że mam przełożyć do innego slotu to _może_ zadziała. Ale nie zrozumiałem w czym jest problem, w ACPI, w driwerze? Bo to jest generalnie ten problem I had a look in the kernel package, and the module is present in the current etch kernel. The /lib/modules/2.6.18-4-686/kernel/drivers/scsi/dpt_i2o.ko is present. Because of this, I have no idea why it isn't automatically loaded. z tego co pamietam w tym serwerku (robilem ostatnio bodajze jakis mały hosting na tym) , jest jakaś jazda ze slotami pci - kart sieciowych nie mozna wsadzać do 1 i 3 slotu czy coś w tym stylu. Pamietam ze wlozylem kontroler satowy do któregoś slotu i serwer strzelal kernel panic a memtest pokazywal ze pamiec jest zwalona. po przełozeniu do wlasciwego slotu wszystko sie uspokoiło. dosc znany problem :) Problem znany, a nawet są dwa: - dla władających płynnie lutownicą: http://download.intel.com/support/motherboards/server/l440gx/ta-240-1.pdf - i drugi opisany powyżej wynikający z współdzielenia magistrali PCI przez chyba karte sieciowa , (mogę zerknąć do manuala serwisowego gdyby ktoś chciał) Także proszę pozmieniać karty w slotach na raiserze! Z tego co wiem jest to nie tylko płytka drukowana ;) Pozdrowiam, Piotr Patan ___ e-mail: [EMAIL PROTECTED] mobile: +48 503 801 733 GG: 14216 skype: pampkin.qn
Re: www2 - po co?
Dnia Wed, 11 Jul 2007 18:31:39 +0200 Rafal Bujnowski [EMAIL PROTECTED] napisał: Dnia Fri, Jul 06, 2007 at 09:37:26PM +0200, Jarek Buczyński napisał: Hej, Mam pytanie dlaczego na niektórych stronach adres jest typu www2? Dlaczego takiego czegoś się używa? Czy chodzi o wskazanie na innego hosta w tej samej domenie np.: www.firma.plA 1.2.3.4 www2.firma.pl A 5.6.7.8 Choćby po to, że może to być zapasowy serwis na innym serwerze i w razie potrzeby można przekierować z www na www2 za pomocą redirecta w PHP. Druga sprawa to często web developerzy stawiają na www2 wersje testowe serwisów. no i jeszcze rozkładają obciążenie na kilka serwerów... load balancing jeśli się nie mylę... Pozdrawiam Piotr Chylewski
Re: Ktore rozwiazanie do wirtualizacji serwerow wybrac?
- na serwerze zdarzało mi się, że czas systemowy skakał (nawet do 1 godziny/dzień) co było bardzo denerwujące zwłasza, że miałem tam bazę danych. Serwer NTP nic nie pomagał. Wyną obarczałem duży load i dużo operacji I/O. Jak przeniosłem bazy na osobny dysk, a statystyki na inny serwer wszystko zaczęło chodzić jak trzeba. Możliwe że powodoem była konfiguracja sprzętowa (2xOpteron), lecz tutaj nie doszedłem do jakichkolwiek sensownych wniosków - zmiana parametrów zegara systemowego (parametr kernela) przyniosła twardy zwis z panikiem (tak sądze, serwer mam zdalnie w innym kraju, więc trudno mi to ocenić). Wymieniłem kernel na 2.6.20 z backports.org i problem zniknął. Co ciekawe, serwer w ciągu 5 sekund potrafił zwolnić o 4 (testowane poprzez reczne odpalanie date co sekundę ze stoperem - ale nie ze sleep 1 ;-) Aż strach się bać, że miałem tam bazę danych ;-) -- Piotr 'QuakeR' Gasidło, BOFH @ pandora.barbara.eu.org ## sending lusers to /dev/null since 1998 # Waiting for tomorrow, for a little ray of light ### Waiting for tomorrow just to see your smile again signature.asc Description: Digital signature
Re: Ktore rozwiazanie do wirtualizacji serwerow wybrac?
W naszym systemie na UW braliśmy pod uwagę tylko VServery i OpenVZ. W końcu zdecydowaliśmy się na OpenVZ, m.in. ze względu na lepszą separację sieci, brak problemów z lo i konieczności bindowania usług do konkretnych IP, możliwość uruchomienia osobnego firewalla dla każdego vzeta, itp. Przetestowałem OpenVZ i musze powiedzieć - fajne ;-) Faktycznie, siec jest w pełni wirtualna, więc loopback działa. Nie ma konieczności przypisywania IP do VPSa. Możliwość ograniczenia zużycia procesora % w czasie rzeczywistym (tj. w ramach głównego serwera wydajemy jedną komendę i już cały VPS zużywa np. maksimum 10% procesora). Całość wygląda na rozwiązanie bardziej dojrzałe od VSerwera. W dokumentacji znalazłem nawet prosty opis migracji do OpenVZ. Do całości można znaleźć na stronie producenta linki do repozytoriów dla Etcha, więc instalacja nie jest skomplikowana. -- Piotr 'QuakeR' Gasidło, BOFH @ pandora.barbara.eu.org ## sending lusers to /dev/null since 1998 # Waiting for tomorrow, for a little ray of light ### Waiting for tomorrow just to see your smile again signature.asc Description: Digital signature
Re: Ktore rozwiazanie do wirtualizacji serwerow wybrac?
- czasem jak zatrzymujesz vserver (vserver vserver1 stop) to skrypty potrafią z niewiadomych przyczyn usunąć inne IP, które należą do innych vserwerów (vserver ... start dopisuje te IP, vserver ... stop usuwa teoretycznie tylko te IP). Należy mieć wtedy przygotowanych prosty skrypt, w którym wykonujemy ip a a dev ... aby szybko dodać zaginione IP (nie nalezy się przejmować czy dane IP jest już na interfejsie czy nie, dostaniesz najwyżej bład ale wszystko bedzie chodzić jak trzeba). Rozwiązanie: http://linux-vserver.org/Frequently_Asked_Questions#If_I_shut_down_my_vserver_guest.2C_the_whole_Internet_interface_ethX_on_the_host_is_shut_down.__What_happened.3F -- Piotr 'QuakeR' Gasidło, BOFH @ pandora.barbara.eu.org ## sending lusers to /dev/null since 1998 # Waiting for tomorrow, for a little ray of light ### Waiting for tomorrow just to see your smile again signature.asc Description: Digital signature
Re: postfix - kompilacia
Dnia Sat, 9 Jun 2007 13:41:12 -0700 (PDT) adi_anabel [EMAIL PROTECTED] napisał: czesc wszystkim, walcze z tym juz caly dzien i bez skudku (to moje poczadki w linuksie) prubuje skompilowac postfixa zeby obslugiwal mysql make tidy make makefiles CCARGS='-DHAS_MYSQL -I/usr/include/mysql' AUXLIBS=' -L/usr/lib -lmysqlclient -lz -lm' make /etc/postfix/postfix-2.3.8/src/global/dict_mysql.c:384: undefined reference to `mysql_free_result' ../../lib/libglobal.a(dict_mysql.o): In function `dict_mysql_quote': /etc/postfix/postfix-2.3.8/src/global/dict_mysql.c:279: undefined reference to `mysql_real_escape_string' /etc/postfix/postfix-2.3.8/src/global/dict_mysql.c:283: undefined reference to `mysql_escape_string' collect2: ld returned 1 exit status make: *** [tlsmgr] Błąd 1 make: *** [update] Błąd 1 i tu wywala blad po 10 minutach kompilowania. Ratujcie apt-get install postfix-mysql Pozdrawiam Piotr Chylewski
Re: mysql.h
Dnia Sat, 9 Jun 2007 06:43:45 -0700 (PDT) adi_anabel [EMAIL PROTECTED] napisał: czesc zainstalowalem mysql komenda 'apt-get install mysql-server mysql-common mysql-client' i teraz chce skompilowac postfixa do pracy z mysql. Problem w tym ze potrzebuje pliku mysql.h ktory sie nie zainstalowal. Jak moge doinstalowac ten plik. witam apt-get install libmysqlclient15-dev Pozdrawiam Piotr Chylewski
Problem z włączeniem quoty
Witam, Czy ktoś się już spotkał z problemem we włączeniu quoty na debian etch? Zarówno pod xfs jak i pod ext3. Co robie. # apt-get install quota # vim /etc/fstab # cat /etc/fstab proc /proc proc defaults 0 0 none /dev/pts devpts gid=5,mode=620 0 0 /dev/sda1 none swap sw 0 0 /dev/sda2 / ext3 defaults 0 0 /dev/sda5 /tmp ext3 defaults 0 0 /dev/sda6 /var/log ext3 defaults 0 0 /dev/sda7 /var/www ext3 defaults,noatime,usrquota 0 0 # mount /dev/sda7 -o remount # touch /var/www/aquota.user # chmod 600 /var/www/aquota.user # /etc/init.d/quota start Checking quotas...done. Turning on quotas...done. # quota -u 1500 quota: error while getting quota from /dev/sda7 for #1500 (id 1500): Success # edquota -u 1500 edquota: error while getting quota from /dev/sda7 for #1500 (id 1500): Success Segmentation fault W logach: Jun 7 11:25:06 v5 kernel: edquota[2422]: segfault at 0004 rip 0804a623 rsp ff89ca20 error 4 Jun 7 11:25:11 v5 kernel: edquota[2423]: segfault at 0004 rip 0804a623 rsp ffaebf40 error 4 Jun 7 11:25:49 v5 kernel: edquota[2433]: segfault at 0004 rip 0804a623 rsp ffd751f0 error 4 Próbowałem quotatool. Wygląda że działa (tylko dlaczego nie można podać uid użytkownika nie istniejącego w /etc/passwd?). # quotatool -u root -b -q 100 -l 100 /dev/sda7 # quotatool -d -u root /dev/sda7 0 /dev/sda7 202584 100 100 0 4 0 0 0 Repquota też działa: # repquota -a *** Report for user quotas on device /dev/sda7 Block grace time: 7days; Inode grace time: 7days Block limitsFile limits Userusedsofthard graceused soft hard grace -- root -- 202584 100 100 4 0 0 Dystrybucja Debian Etch, Kernel: ii linux-image-2.6.18-4-amd642.6.18.dfsg.1-12etch2 Linux 2.6.18 image on AMD64 Testowałem też dla kernela z backports.org: ii linux-image-2.6.21-1-amd642.6.21-4~bpo.1 Linux 2.6.21 image on AMD64 Wynik ten sam. Najciekawsze, że posiadam identyczny serwer(y) - ta sama dystrybucja, ten sam fs, ten sam kernel (2.6.18-4-amd4) - tam problem nie występuje. System plików to 2x300GB spięte na kontrolerze 3ware w RAID0. System plików sformatowany z opcją -i 4096 i -O dir_index. # df -i /dev/sda7 FilesystemInodes IUsed IFree IUse% Mounted on /dev/sda7138182656 12 1381826441% /var/www # df /dev/sda7 Filesystem 1K-blocks Used Available Use% Mounted on /dev/sda7535383180202592 507545980 1% /var/www Jak już pisałem, próbowałem bawić się z XFS - ten sam efekt :/ -- Piotr 'QuakeR' Gasidło, BOFH @ pandora.barbara.eu.org ## sending lusers to /dev/null since 1998 # Waiting for tomorrow, for a little ray of light ### Waiting for tomorrow just to see your smile again signature.asc Description: Digital signature
Re: Problem z włączenie m quoty
On Thu, 07/06, 11:37:41AM, Piotr Gasidlo wrote: (...) Przetestowałem jeszcze dojście do quoty via perl: # cat q.pl #!/usr/bin/perl use Quota; use Data::Dumper; my $dev = Quota::getqcarg('/var/www'); Quota::setqlim($dev, 1500, 1000, 1000, 0, 0); my @quota = Quota::query($dev, 1500); print Dumper([EMAIL PROTECTED]); # perl q.pl $VAR1 = [ 0, 1000, 1000, 0, 0, 0, 0, 0 ]; Wygląda że działa. Ręce opadają :/ -- Piotr 'QuakeR' Gasidło, BOFH @ pandora.barbara.eu.org ## sending lusers to /dev/null since 1998 # Waiting for tomorrow, for a little ray of light ### Waiting for tomorrow just to see your smile again signature.asc Description: Digital signature
Re: Problem z włączenie m quoty
On Thu, 07/06, 11:37:41AM, Piotr Gasidlo wrote: Najciekawsze, że posiadam identyczny serwer(y) - ta sama dystrybucja, ten sam fs, ten sam kernel (2.6.18-4-amd4) - tam problem nie występuje. Tak mnie natchneło i sprawdziłem przy pomocy file 'apt-cache'. Efekt. Na tym serwerze mam 32-bitową dystrybucję, nie 64-bitową tak jak się spodziewałem. Wr ... w każdym razie to co opisałem nadal jest aktualne, lecz trzeba to wziąć pod kątem 32-bitowego debiana na Athlonie64. -- Piotr 'QuakeR' Gasidło, BOFH @ pandora.barbara.eu.org ## sending lusers to /dev/null since 1998 # Waiting for tomorrow, for a little ray of light ### Waiting for tomorrow just to see your smile again signature.asc Description: Digital signature
Re: Ktore rozwiazanie do wirtualizacji serwerow wybrac?
On czw, 31/05, 02:29:25, Jarek Buczyński wrote: Korzystam z tego w ramach kilku serwerów głownie do separacji różnych aplikacji pod kątem bezpieczeństwa (nie zawsze wierzy się dostawcy softu). Najczęsciej konfiguracja wygląda tak: Głowny serwer: baza danych VServer1: serwer WWW (np. z PHP4) dla aplikacji 1, VServer2: serwer WWW (np. z PHP5) dla aplikacji 2, etc. Mógłbyś powiedzieć coś o instalacji tego pod debianem, jak to przebiega i coś o podstawowej konfiguracji? Zaczynasz od zainstalowania Debian Etch. Pózniej instalujesz pakiety: - linux-image-2.6-vserver-amd64-k8-smp (możliwe, że u Ciebie będzie zainstalować inny kernel, w zalezności od sprzetu) - util-vserver - vserver-debiantools Następnie na wszystkich usługach, które słuchają na głownym serwerze zmieniasz konfigurację aby słuchały tylko na konkretnych IP (najczęściej loopback i pierwsze IP przypisane serwerowi) - ogólnie, żadnych bindowań do *. Robisz reboot. Teraz pozostaje stworzenie VSerwerów: # newvserver --hostname vserver1 --domain domain.ltd --ip 1.2.3.4/29 Ważne jest podanie dobrego prefiksu sieci w ramach której jest IP przydzielane vserwerowi. Pozniej czekasz aż wszystko się ściagnie i ostatecznie: # vserver vserver1 start I gotowe. Aby wejść do vserwera: # vserver vserver1 enter Z uwag po instalacji: - nie wiem dlaczego na głownym serwerze zmiena mi się /etc/motd - vserwer nie startuje automatycznie po reboocie, potrzeba dodać: echo default /etc/vservers/vserver1/apps/init/mark - dla wszystkich usług w ramach vserwera ustawić tak aby słuchały na konkretnym IP przypisanym VSerwerowi (jak chcesz dodać następne IP to popatrz do katalogu /etc/vservers/vserver1/interfaces/) - czasem jak zatrzymujesz vserver (vserver vserver1 stop) to skrypty potrafią z niewiadomych przyczyn usunąć inne IP, które należą do innych vserwerów (vserver ... start dopisuje te IP, vserver ... stop usuwa teoretycznie tylko te IP). Należy mieć wtedy przygotowanych prosty skrypt, w którym wykonujemy ip a a dev ... aby szybko dodać zaginione IP (nie nalezy się przejmować czy dane IP jest już na interfejsie czy nie, dostaniesz najwyżej bład ale wszystko bedzie chodzić jak trzeba). Jaki do tego trzeba mieć sprzęt żeby postawić kilka takich wirtualek i żeby dobrze stabilnie chodziło? Ja mam to na 2xAMD Opteron 246/2Ghz, 4GB RAM, choć uruchamiałem też na 2xAMD Athlon64/2Ghz, 2GB RAM. Ogólnie narzut wirtualizacji to 1-2% obciążenia procesora (przynajmniej tak piszą, ja to w praktyce potwierdzam). Jak VServer wychodzi w porównaniu do Xen'a bo na debian-administration.org widzę że promują Xen'a :) Chodzi mi o ogólne informacje instalacja konfiguracja i użytkowanie? Nie korzystałem nigdy z Xena. -- Piotr 'QuakeR' Gasidło, BOFH @ pandora.barbara.eu.org ## sending lusers to /dev/null since 1998 # Waiting for tomorrow, for a little ray of light ### Waiting for tomorrow just to see your smile again signature.asc Description: Digital signature
Re: Ktore rozwiazanie do wirtualizacji serwerow wybrac?
On czw, 31/05, 14:55:30, Wojciech Ziniewicz wrote: nie polecam jednak vservera na aplikacje sieciowe - oczywiste problemy z loopbackiem i jak do tej pory Dla Apache/MySQL/PostgreSQL/Bind (tutaj musiałem łatać, bo w domyślnym Debianie krzyczał o Compatibilites) wszystko działa bez loopback. Może trzeba trochę firewall podtinungowac (czasem nie da się nie słuchać, a potrzeba mieć kontakt z aplikacją tylko lokalnie). nie udało mi sie przypiąc vservera do oddzielnego interfejsu fizycznego .. Tak tylko głośno mysle, bo sam tego nie potrzebowałem. Próbowałes zmian w /etc/vservers/*/interfaces/0/dev ? -- Piotr 'QuakeR' Gasidło, BOFH @ pandora.barbara.eu.org ## sending lusers to /dev/null since 1998 # Waiting for tomorrow, for a little ray of light ### Waiting for tomorrow just to see your smile again signature.asc Description: Digital signature
Re: Ktore rozwiazanie do wirtualizacji serwerow wybrac?
On śro, 30/05, 13:26:51, Tomasz Czachorowski wrote: -Linux-VServer Korzystam z tego w ramach kilku serwerów głownie do separacji różnych aplikacji pod kątem bezpieczeństwa (nie zawsze wierzy się dostawcy softu). Najczęsciej konfiguracja wygląda tak: Głowny serwer: baza danych VServer1: serwer WWW (np. z PHP4) dla aplikacji 1, VServer2: serwer WWW (np. z PHP5) dla aplikacji 2, etc. Ze względu na fakt, że do jednego VServera mam do 5 dodatkowych IP, więc maksymalna konfiguracja na jakiej to testowałem to 5 Vserwerów. Całość chodzi przywoicie, nie zauważyłem żadnych wąskich gardeł w porównaniu z poprzednią konfiguracją (kilka aplikacji/1 serwer). Mam też serwer na którym mam uruchomione (w ramach osobnych VSerwerów): binda, mysql + postgresql, www, 2 x serwer powerdns, kilka specjalizowanych vserwerów z www (munin, statystyki, etc) i wszystko chodzi jak trzeba. Uwagi: - vapt-get, czyli nie trzeba ładować się na każdy vserwer aby zrobić upgrade, - vtop, vps - czyli łatwo możesz wylistować wszystkie procesy i ew. znaleźć winowajce obciązenia, - kwestia partycji, trudno ocenić co będzie potrzebne dla vserwerów, więc stosuje schemat duża partycja na głowny serwer i vservery (są standardowo w katalogu /var/lib/vservers) i ew. osobne partycje wg. uznania dla każdego vserwera (tworzone w LVM), partycje preferuje mountować w ramach głownego vserwera, choć jest możliwe jest także mountowanie partycji w ramach vserwera, - brak interfejsu lo, czyli w przypadku usług które mają słychać a nie mają być wystawione na świat (SMTP np.) trzeba albo ustawić odpowiedniego firewalla (firewalla konfigurujesz tylko na głownym serwerze, na vserwerze jest to nie możliwe) albo słuchać na sockecie albo wogóle nie słuchać jak nie potrzeba (np. exim4 w trybie queueonly), - do obejscia, cały pomiędzy vserverami idzie po lo (mimo że vserwery mają tylko interfejs eth0), więc trzeba to wziąć pod uwage przy konfiguracji firewalla, - na serwerze zdarzało mi się, że czas systemowy skakał (nawet do 1 godziny/dzień) co było bardzo denerwujące zwłasza, że miałem tam bazę danych. Serwer NTP nic nie pomagał. Wyną obarczałem duży load i dużo operacji I/O. Jak przeniosłem bazy na osobny dysk, a statystyki na inny serwer wszystko zaczęło chodzić jak trzeba. Możliwe że powodoem była konfiguracja sprzętowa (2xOpteron), lecz tutaj nie doszedłem do jakichkolwiek sensownych wniosków - zmiana parametrów zegara systemowego (parametr kernela) przyniosła twardy zwis z panikiem (tak sądze, serwer mam zdalnie w innym kraju, więc trudno mi to ocenić). - nie mogę odpalić procesu z ionice w ramach vserwera, nie grzebałem jak to poprawić (obejść), - trochę problemów z LVM (tj. partycje są utworzone na głównym serwerze, na VServerze nie da się nimi manipulować, tj. np. tworzyć snapsnota, etc. - da się obejść, lvcreate na głownym serwerze a pozniej vserver exec aby uruchomić coś w ramach określonego vserwera - nie testowałem quoty oraz limitowania vserwerów (czas procesora), wg. dokumentacji jest to możliwe Wszystko to co opisałem mam na Debianie Etch, 64-bitowy, kernel dystrybucyjny (z postfixem -vserver). -- Piotr 'QuakeR' Gasidło, BOFH @ pandora.barbara.eu.org ## sending lusers to /dev/null since 1998 # Waiting for tomorrow, for a little ray of light ### Waiting for tomorrow just to see your smile again signature.asc Description: Digital signature
Re: postgresql-8.1
On pon, 21/05, 13:51:30, Albert Czarnecki wrote: Witam Uruchamial ktos moze dwie bazy postgresql-8.1 na etchu rownoczesnie poprzez skrypty debianowe? (...) Przerabial ktos cos takiego? Użyj komendy pg_createcluster do stworzenia drugiego clustra. Reszta działa out-of-box. -- Piotr 'QuakeR' Gasidło, BOFH @ pandora.barbara.eu.org ## sending lusers to /dev/null since 1998 # Waiting for tomorrow, for a little ray of light ### Waiting for tomorrow just to see your smile again signature.asc Description: Digital signature
Re: SIGSEGV z Apache, Debian Etch, VServer
On sob, 14/04, 13:10:44, Marcin Owsiany wrote: [...] Jeśli ten stos zawiera choć trochę prawdy, to może to być konflikt bibliotek, np. A zlinkowane z B w wersji X i C w wersji Z, a B zlinkowane z C w wersji Y. Brałem wszystko z repozytorium Debiana. Mam jedną aplikację z IonCube (ale modułem PHP ładowanym dynamicznie, a nie na stałe wpisanym do php.ini). Zobaczę w nocy, czy wyłączenie IonCube zniweluje te SIGSEGV. Czy apache choć trochę działa, czy wszystkie requesty kończą się SIGSEGVem? Działa bardzo dobrze. Tj. wszystkie requesty są poprawnie obsługiwane. Wygląda, że problem pojawia się dopiero jak Apache zabija nadmiarowe dzieci. Jeśli nie wszystkie, to próbuj wyłączać różne funkcje, moduły i patrzeć kiedy przestanie. Może ltrace też coś podpowie.. Niewiele podpowiedział, przynajmniej mi to nic nie mówi. (...) strcmp(ssl, ssl) = 0 shutdown(3, 1, 1, 0x2ad6c0a36000, 0x79726f6765746143) = 0 select(4, 0x7fffea08a9c0, 0, 0, 0x7fffea08aa40) = 1 read(3, , 512) = 0 close(3) = 0 __errno_location() = 0x2ad6c156ac40 sigemptyset(0x7fffea08a6d8) = 0 sigaction(10, 0x7fffea08a6d0, 0x7fffea08a630) = 0 semop(0x138015, 0x54f2d8, 1, 186, 0x86c490 unfinished ... --- SIGUSR1 (User defined signal 1) --- sigemptyset(0x7fffea08a228) = 0 sigaction(1, 0x7fffea08a220, 0x7fffea08a180) = 0 sigemptyset(0x7fffea08a228) = 0 sigaction(10, 0x7fffea08a220, 0x7fffea08a180) = 0 exit(0 unfinished ... --- SIGSEGV (Segmentation fault) --- chdir(/etc/apache) = 0 sigemptyset(0x7fffea089b28) = 0 sigaction(11, 0x7fffea089b20, 0x7fffea089a80) = 0 getpid() = 27946 kill(27946, 11) = 0 --- SIGSEGV (Segmentation fault) --- +++ killed by SIGSEGV +++ -- Piotr 'QuakeR' Gasidło, BOFH @ pandora.barbara.eu.org ## sending lusers to /dev/null since 1998 # Waiting for tomorrow, for a little ray of light ### Waiting for tomorrow just to see your smile again signature.asc Description: Digital signature
SIGSEGV z Apache, Debian Etch, VServer
Witam, Mam dziwny problem z Apache (1.3) uruchomiony w ramach jednego z VSerwerów. Wszystko na paczkach debiana Etch (nic nie przebudowywałem): - w logach, /var/log/apache/error.log: [Fri Apr 13 08:24:49 2007] [notice] child pid 6479 exit signal Segmentation fault (11) [Fri Apr 13 08:24:56 2007] [notice] child pid 10131 exit signal Segmentation fault (11) [Fri Apr 13 08:24:57 2007] [notice] child pid 10130 exit signal Segmentation fault (11) [Fri Apr 13 08:24:58 2007] [notice] child pid 10129 exit signal Segmentation fault (11) [Fri Apr 13 08:24:59 2007] [notice] child pid 9800 exit signal Segmentation fault (11) [Fri Apr 13 08:25:01 2007] [notice] child pid 10128 exit signal Segmentation fault (11) [Fri Apr 13 08:25:03 2007] [notice] child pid 9786 exit signal Segmentation fault (11) [Fri Apr 13 08:25:05 2007] [notice] child pid 9785 exit signal Segmentation fault (11) - jak podczepię strace pod proces apache, to po pewnym czasie dostaje: #strace -p 12345 ... munmap(0x2b819f193000, 1186000) = 0 munmap(0x2b819f3e9000, 1056744) = 0 munmap(0x2b819f4eb000, 1066608) = 0 munmap(0x2b819e492000, 1106848) = 0 munmap(0x2b819e5a4000, 1275080) = 0 munmap(0x2b819e6dc000, 1249152) = 0 close(6)= 0 close(14) = 0 close(5)= 0 munmap(0x2b81a05f5000, 31457280)= 0 munmap(0x2b819e269000, 1166944) = 0 brk(0x8b2000) = 0x8b2000 --- SIGSEGV (Segmentation fault) @ 0 (0) --- chdir(/etc/apache)= 0 rt_sigaction(SIGSEGV, {SIG_DFL}, {SIG_DFL}, 8) = 0 kill(11359, SIGSEGV)= 0 rt_sigreturn(0x2c5f)= 6878234025558632563 --- SIGSEGV (Segmentation fault) @ 0 (0) --- Process 11359 detached - ewentualnie gdb: # gdb -p 12345 ... Reading symbols from /lib/libnss_dns.so.2...done. Loaded symbols for /lib/libnss_dns.so.2 0x2b819ab0c182 in __read_nocancel () from /lib/libpthread.so.0 (gdb) c Continuing. Program received signal SIGUSR1, User defined signal 1. [Switching to Thread 47835655134336 (LWP 12057)] 0x2b819b2428e9 in semop () from /lib/libc.so.6 (gdb) c Continuing. Program received signal SIGSEGV, Segmentation fault. 0x2b819a86eb10 in _dl_rtld_di_serinfo () from /lib64/ld-linux-x86-64.so.2 (gdb) bt #0 0x2b819a86eb10 in _dl_rtld_di_serinfo () from /lib64/ld-linux-x86-64.so.2 #1 0x2b819a86ef9a in _dl_rtld_di_serinfo () from /lib64/ld-linux-x86-64.so.2 #2 0x2b819a872691 in _dl_rtld_di_serinfo () from /lib64/ld-linux-x86-64.so.2 #3 0x2b819a8723a2 in _dl_rtld_di_serinfo () from /lib64/ld-linux-x86-64.so.2 #4 0x2b819e38b8a3 in ?? () from /lib/librt.so.1 #5 0x7fff1023f490 in ?? () #6 0x2b819e38f105 in ?? () from /lib/librt.so.1 #7 0x002f in ?? () #8 0x2b819a8731c3 in _dl_rtld_di_serinfo () from /lib64/ld-linux-x86-64.so.2 Previous frame inner to this frame (corrupt stack?) Na serwerze działa apache + php5. Kotś może mnie naprowadzić, gdzie mam szukać błedów? Paczki: ii linux-image-2.6-vserver-amd642.6.18+6 Linux kernel 2.6 image on AMD64 ii apache 1.3.34-4.1 versatile, high-performance HTTP server ii apache-common 1.3.34-4.1 support files for all Apache webservers ii apache-dev 1.3.34-4.1 development kit for the Apache webserver ii apache2-utils 2.2.3-4 utility programs for webservers ii libapache-mod-geoip1.2.9-1 GeoIP support for apache ii libapache-mod-php5 5.2.0-8+etch1 server-side, HTML-embedded scripting languag ii libapache-mod-ssl 2.8.25-2Strong cryptography (HTTPS support) for Apac -- Piotr 'QuakeR' Gasidło, BOFH @ pandora.barbara.eu.org ## sending lusers to /dev/null since 1998 # Waiting for tomorrow, for a little ray of light ### Waiting for tomorrow just to see your smile again signature.asc Description: Digital signature
Problem with entering bios setup after interrupted network installation
Hi, About 2 weeks ago I bought a FSC Amilo Pro V3505 laptop. Last Wednesday I tried to install on it Debian from network (using Netinstal CD). However my Network card wasn't detected and installation failed. After message that no card has been detected I tried to pick some random models in hope it will work, but with no sucess. After that I couldn't reboot system in 'normal way', i.e. neither Ctrl-Alt-Del nor Power button worked. After about 5 minutes I pulled out the battery. After plugging it back I came across following problem: I cannot enter bios setup, and system boots from HDD (there is grub from previous, disfunctional instllation of Gentoo). This laptop uses Phoenix bios and according to manual I should be able to turn on/off bootmenu with F12 button, but it doesn't work. Neither does F2 - enter bios setup (before there were no such problem). Esc works, and keyboard as such - tried on grub command line. Is it possible that during installation some part of BIOS has been overwritten or some settings changed? Is there anything I could do about it or do I have to rely on manufacturer's service (I contacted help desk both in Poland (where I live) as well as directly in Germany - but with no sucess, they could't came up with anything usefull - just repeated manual) thnx for Your help Zdumiewająca wystawa klocków Lego i lalek Barbie! Zobacz kiedy będzie w Twoim mieście - Kliknij: http://klik.wp.pl/?adr=http%3A%2F%2Fadv.reklama.wp.pl%2Fas%2Fd84.htmlsid=1052 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
gmailfs
Hello, I am having problems with gmailfs. I am using Debian testing amd-64 and gmailfs 0.7.2-2. Apparently I can log in and send files to gmail but I can't list the gmail mount catalogue and copy files from gmail to my computer. My account is OK as I can use it with firefox gmail space extension. Any ideas? Piotr -- Piotr Kopszak, Ph.D. Polish Art Gallery, National Museum in Warsaw -http://kopszak.mnw.art.pl/ http://www.magnatune.com/artists/altri_stromenti -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Debian, Iceweasle, Firefox!
Only Etch supports amd64, so I was forced to use Etch. Command I have used: apt-get install firefox NOT apt-get install iceweasel I knew exactly what I was doing, because my friend told me that there will be no longer firefox in debian, instead of it will be iceweasel, so I was curious what will happen after typing: apt-get install firefox There is no longer firefox in debian etch, so after typing: apt-get install firefox I would like to see announcement: Firefox packages are no longer present in debian distribution, please try iceweasel. Do you see a difference? I don't use aptitude, because I prefer command line. On 1/27/07, Roberto C. Sanchez [EMAIL PROTECTED] wrote: On Sat, Jan 27, 2007 at 01:11:26AM +0100, Piotr Dziubinski wrote: Answers: Etch apt-get I was informed by apt-get that Iceweasel package will be installed, but I wasn't informed that instead of Firefox and it is a problem! If I would like to uninstall (even current version of) Firefox I would do it myself. So, you are running the *testing* distribution, you perform an 'apt-get upgrade', it decides it wants to install *new* packages and you proceed *blindly* without investigating *why* the new package was being installed? I'm sorry, but it seems like you did this to yourself. Had you bothered to run and 'apt-cache show iceweasel', you would have seen what was going on. Had you been running aptitude, which has been the preferred and better supported package manager for Debian since the release of Sarge, you would have seen by simply highlighting the iceweasel package that it was being installed because firefox depended on it. I'll say again, you did this to yourself and your initial flame against everyone was highly uncalled for. Regards, -Roberto -- Roberto C. Sanchez http://people.connexer.com/~roberto http://www.connexer.com -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFFu2E35SXWIKfIlGQRArH6AJ9CBMcLt8QfBP9U/SOAZ1wPeiQbvgCaA9cX PtdSg8MtZxYGjxKkvnplV14= =cuhG -END PGP SIGNATURE- -- Piotr Dziubinski
Re: Debian, Iceweasle, Firefox!
Iceweasel and Firefox are a different products, very similar, but different. So I think that debian should no longer use firefox as a name for iceweasel package! I will give you an example: You are typing: aptitude update aptitude dist-upgrade and after that you realize that you have no longer debian, but knoppix or ubuntu... ups... they are very similar you can say, but did you want to change your debian to ubuntu? I think: no! Be realist, do everybody have a time to read all news carefully? On 1/27/07, Roberto C. Sanchez [EMAIL PROTECTED] wrote: On Sat, Jan 27, 2007 at 03:55:33PM +0100, Piotr Dziubinski wrote: Only Etch supports amd64, so I was forced to use Etch. There is an unofficial Sarge release for amd64. I use it on a couple of servers and many Debian users the unofficial Sarge with no problems. Command I have used: apt-get install firefox NOT apt-get install iceweasel I knew exactly what I was doing, because my friend told me that there will be no longer firefox in debian, instead of it will be iceweasel, so I was curious what will happen after typing: ^^^ Hmm. apt-get install firefox There is no longer firefox in debian etch, so after typing: apt-get install firefox I would like to see announcement: Firefox packages are no longer present in debian distribution, please try iceweasel. OK. Here are the announcements: http://lists.debian.org/debian-news/debian-news-2006/msg00044.html http://lists.debian.org/debian-legal/2004/12/msg00328.html http://lists.debian.org/debian-devel/2006/10/msg00665.html The debian-news item is from mid-October of 2006. There was also Lots of discussion about it on various Debian mailing lists. Do you see a difference? Nope. I don't use aptitude, because I prefer command line. OK. Then 'aptitude update aptitude dist-upgrade' will work just the same. Of course, it won't tell you *why* since you are not in the aptitude browser, but aptitude works on the command line just like apt-get and keeps better track of things to boot. Regards, -Roberto -- Roberto C. Sanchez http://people.connexer.com/~roberto http://www.connexer.com -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFFu3C55SXWIKfIlGQRAhEQAKCjC3GUFRH9C8M9tFrNUSblEYj/hgCdE2uH YRi6LtPWrJtO9pdOg8Vxx14= =jVhV -END PGP SIGNATURE- -- Piotr Dziubinski
Debian, Iceweasle, Firefox!
I'm very irritated and disappointed with your policy! Why? I've used various Linux distributions for 8 years. I've been using Debian for the last 6 months, but today I changed my mind! After updating Firefox in Debian I realized that Firefox is no longer present in my operating system! Instead of it, I have this trashy and shity Iceweasle. F.u...k, #%[EMAIL PROTECTED] 5^%^*(@ %$$%^$ Oki, I can install my favorite Firefox from other packages, but do you realize, that I would like to be asked if I want to use this f..u...k...ng %^*( *##$$ ^^% Iceweasle instead of Firefox? Good luck with using losers... ups I mean: losing users! :P Ex-Debian user... ... back to the Gentoo