APM and Linux Clock (WAS:Re: very slow Linux clock)
Thanks for your reply: since I have remove the `Batterie Charge Monitor' applet (Gnome2 under testing/unstable) the Linux clock is fine. Is there a link between this aapplet (APM) and the Linux clock ? Thanks, Jerome Jan Trippler wrote: On Son, 16 Feb 2003 at 15:05 (+0200), Jerome BENOIT wrote: I have big trouble with my Linux Clock: it is very slow, so [1] the time becomes quickly wrong and [2] updates with NTP stuff (or others) seems ridiculous. How can we fix it ? I'm not sure, but try to delete /etc/adjtime, set up the system time (man date), update rtc (man hwclock) and look, what's going on. Jan -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: APM and Linux Clock (WAS:Re: very slow Linux clock)
On Sun, Feb 16, 2003 at 07:18:00PM +0200, Jerome BENOIT wrote: Thanks for your reply: since I have remove the `Batterie Charge Monitor' applet (Gnome2 under testing/unstable) the Linux clock is fine. Is there a link between this applet (APM) and the Linux clock ? The APM driver disables interupts when it polls the battery status, which often causes some clock interupts to be missed, which skews the system clock a bit. This can sometimes accumulate into minutes each hour. -- René Seindal ([EMAIL PROTECTED]) http://sights.seindal.dk/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: APM on Linux?
I read the docu on APM. Seems like it is useful for laptop and may not be for desktop? Suppose I can turn the system into standby mode, how can I turn the hard drive spin down? The question boils down to: how can save maximum energy when the computer is idling? I mainly use the computer after work for surfing net and do a little programming. Thanks. Jinsong
Re: APM on Linux?
The following is taken from debian install instructions 4.7. Advanced Power Management If your motherboard provides Advanced Power Management (APM), configure it so that power management is controlled by APM. Disable the doze, standby, suspend, nap, and sleep modes, and disable the hard-disk power-down timer. Linux can take over control of these modes, and can do a better job of power- management than the BIOS. The version of the operating sys- tem kernel on the installation floppies does not, however, use APM, because we've had reports of one laptop system crashing when the Linux APM driver is configured. Once you've installed Linux, you can install the kernel-source package and build a custom-configured version of the operating system kernel to enable APM and other features. setterm should, among other things, set power saving mode for the console. try setterm -h. I'm experiencing the same. On my machine, suspend mode usually triggers a lockup after some while. Moreover, crontabs won't run and the system clock runs slow (well, not the system clock in BIOS but the Linux one); I also use the vgetty for faxing and that didn't work anymore either. So, I chose to disable suspend in BIOS and only allow the PC to fall into standby mode. Until now, this works. BTW, I have an Asus TX97 with AMD K6-233. The apm utilities work well, (except for apm -s :)) If someone has a solution I'd be happy to learn of it. Felix ___ Felix Chang Hoogovens Research Development P.O. Box 10.000 1970 CA IJmuiden tel (+31) 251 492927 fax (+31) 251 470114 [EMAIL PROTECTED] -- From: Jinsong Zhao[SMTP:[EMAIL PROTECTED] Sent: dinsdag 22 december 1998 0:31 To: debian-user@lists.debian.org Cc: recipient.list.not.shown Subject:APM on Linux? Hi, It would be very nice if we can leave the computer on without consuming too much energy. My computer has a CMOS option to turn the APM on system (doze, standby, suspend) and harddisk. If I disable the feature, no problem; but if I enable those features, the computer locked after some time: no response at the keyboard, dead. The APM works fine on X11: the monitor will automatically enter suspend mode after sometime. Hope this feature also works on the whole system. What's the best way to set up the BIOS and kernel? Thanks a lot! Jinsong
RE: APM on Linux?
I'm experiencing the same. On my machine, suspend mode usually triggers a lockup after some while. Moreover, crontabs won't run and the system clock runs slow (well, not the system clock in BIOS but the Linux one); I also use the vgetty for faxing and that didn't work anymore either. So, I chose to disable suspend in BIOS and only allow the PC to fall into standby mode. Until now, this works. BTW, I have an Asus TX97 with AMD K6-233. The apm utilities work well, (except for apm -s :)) If someone has a solution I'd be happy to learn of it. Felix ___ Felix Chang Hoogovens Research Development P.O. Box 10.000 1970 CA IJmuiden tel (+31) 251 492927 fax (+31) 251 470114 [EMAIL PROTECTED] -- From: Jinsong Zhao[SMTP:[EMAIL PROTECTED] Sent: dinsdag 22 december 1998 0:31 To: debian-user@lists.debian.org Cc: recipient.list.not.shown Subject: APM on Linux? Hi, It would be very nice if we can leave the computer on without consuming too much energy. My computer has a CMOS option to turn the APM on system (doze, standby, suspend) and harddisk. If I disable the feature, no problem; but if I enable those features, the computer locked after some time: no response at the keyboard, dead. The APM works fine on X11: the monitor will automatically enter suspend mode after sometime. Hope this feature also works on the whole system. What's the best way to set up the BIOS and kernel? Thanks a lot! Jinsong -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
APM on Linux?
Hi, It would be very nice if we can leave the computer on without consuming too much energy. My computer has a CMOS option to turn the APM on system (doze, standby, suspend) and harddisk. If I disable the feature, no problem; but if I enable those features, the computer locked after some time: no response at the keyboard, dead. The APM works fine on X11: the monitor will automatically enter suspend mode after sometime. Hope this feature also works on the whole system. What's the best way to set up the BIOS and kernel? Thanks a lot! Jinsong