Re: Next question: Netgear wireless help
On Wed, 3 Dec 2008 14:00:48 -0800 "Kelly Clowers" <[EMAIL PROTECTED]> wrote: > On Wed, Dec 3, 2008 at 12:53, Chris <[EMAIL PROTECTED]> wrote: > > On Wed, 3 Dec 2008 12:22:32 -0800 > > "Kelly Clowers" <[EMAIL PROTECTED]> wrote: > > > >> On Wed, Dec 3, 2008 at 11:57, Chris <[EMAIL PROTECTED]> wrote: > >> > On Wed, 3 Dec 2008 11:43:15 -0800 > >> > "Kelly Clowers" <[EMAIL PROTECTED]> wrote: > >> > > >> >> On Wed, Dec 3, 2008 at 10:38, Chris <[EMAIL PROTECTED]> > >> >> wrote: > >> >> > Greetings folks, > >> >> > > >> >> > What is suggested I used to get either of my Netgear PCMCIA > >> >> > nics to work? > >> >> > > >> >> > 1. MA401 > >> >> > 2. WG511T > >> >> > >> >> What is the output of lspci for each of them? > >> >> > >> >> > >> >> Cheers, > >> >> Kelly Clowers > >> >> > >> >> > >> > > >> > > >> > Thanks Kelly for the reply: > >> > > >> > MA401: > >> > doppleganger:~# lspci > >> > 00:00.0 Host bridge: ATI Technologies Inc RS200/RS200M AGP Bridge > >> > [IGP 340M] (rev 02) 00:01.0 PCI bridge: ATI Technologies Inc PCI > >> > Bridge [IGP 340M] 00:06.0 Multimedia audio controller: ALi > >> > Corporation M5451 PCI AC-Link Controller Audio Device (rev 02) > >> > 00:07.0 ISA bridge: ALi Corporation M1533/M1535/M1543 PCI to ISA > >> > Bridge [Aladdin IV/V/V+] 00:08.0 Modem: ALi Corporation M5457 > >> > AC'97 Modem Controller 00:0a.0 CardBus bridge: Texas Instruments > >> > PCI1410 PC card Cardbus Controller (rev 02) 00:0b.0 USB > >> > Controller: VIA Technologies, Inc. VT82x UHCI USB 1.1 > >> > Controller (rev 50) 00:0b.1 USB Controller: VIA Technologies, > >> > Inc. VT82x UHCI USB 1.1 Controller (rev 50) 00:0b.2 USB > >> > Controller: VIA Technologies, Inc. USB 2.0 (rev 51) 00:0c.0 > >> > FireWire (IEEE 1394): Texas Instruments TSB43AB21 > >> > IEEE-1394a-2000 Controller (PHY/Link) 00:10.0 IDE interface: ALi > >> > Corporation M5229 IDE (rev c4) 00:11.0 Bridge: ALi Corporation > >> > M7101 Power Management Controller [PMU] 00:12.0 Ethernet > >> > controller: National Semiconductor Corporation DP83815 > >> > (MacPhyter) Ethernet Controller 01:05.0 VGA compatible > >> > controller: ATI Technologies Inc Radeon IGP 330M/340M/350M > >> > >> I do not see the device in this list. Is this card known to be > >> working? It should show up whether or not there is a driver for it. > >> > >> > >> > WG511T: > >> > doppleganger:~# lspci > >> > >> > >> > 02:00.0 Ethernet controller: Atheros Communications Inc. > >> > AR5212/AR5213 Multiprotocol MAC/baseband processor (rev 01) > >> > >> > >> For Etch, madwifi is what you want. For Lenny (kernel 2.6.26), > >> you want the built-in ath5k driver (should just work). > >> > >> > >> Cheers, > >> Kelly Clowers > >> > > > > Thanks again ... Now, the "how stupid am I" question. > > > > How do I go about getting that kernel - currnetly its 2.6.18-6-686 > > Oops, lets keep this on the list. > > You could upgrade to Lenny (testing), or you could compile > your own kernel, or you might be able to use say, an Ubuntu > kernel. Or stay with 2.6.18 and use madwifi. Lenny has been > frozen pending release for a while now, so it should be safe > to use. > > My first choice would be to upgrade, and my second would be > to use madwifi, but that is just me. It is up to you. > > > Cheers, > Kelly Clowers > > I found my issues. Silly, silly me!!! Anyways, all is good now. Wireless works, kernel is in ... Now I'm a happy lil Lenny-User. -- Best regards, Chris () ascii ribbon campaign - against html e-mail /\ www.asciiribbon.org - against proprietary attachments "There's no place like 127.0.0.1" -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Next question: Netgear wireless help
On Wed, Dec 3, 2008 at 12:53, Chris <[EMAIL PROTECTED]> wrote: > On Wed, 3 Dec 2008 12:22:32 -0800 > "Kelly Clowers" <[EMAIL PROTECTED]> wrote: > >> On Wed, Dec 3, 2008 at 11:57, Chris <[EMAIL PROTECTED]> wrote: >> > On Wed, 3 Dec 2008 11:43:15 -0800 >> > "Kelly Clowers" <[EMAIL PROTECTED]> wrote: >> > >> >> On Wed, Dec 3, 2008 at 10:38, Chris <[EMAIL PROTECTED]> wrote: >> >> > Greetings folks, >> >> > >> >> > What is suggested I used to get either of my Netgear PCMCIA nics >> >> > to work? >> >> > >> >> > 1. MA401 >> >> > 2. WG511T >> >> >> >> What is the output of lspci for each of them? >> >> >> >> >> >> Cheers, >> >> Kelly Clowers >> >> >> >> >> > >> > >> > Thanks Kelly for the reply: >> > >> > MA401: >> > doppleganger:~# lspci >> > 00:00.0 Host bridge: ATI Technologies Inc RS200/RS200M AGP Bridge >> > [IGP 340M] (rev 02) 00:01.0 PCI bridge: ATI Technologies Inc PCI >> > Bridge [IGP 340M] 00:06.0 Multimedia audio controller: ALi >> > Corporation M5451 PCI AC-Link Controller Audio Device (rev 02) >> > 00:07.0 ISA bridge: ALi Corporation M1533/M1535/M1543 PCI to ISA >> > Bridge [Aladdin IV/V/V+] 00:08.0 Modem: ALi Corporation M5457 AC'97 >> > Modem Controller 00:0a.0 CardBus bridge: Texas Instruments PCI1410 >> > PC card Cardbus Controller (rev 02) 00:0b.0 USB Controller: VIA >> > Technologies, Inc. VT82x UHCI USB 1.1 Controller (rev 50) >> > 00:0b.1 USB Controller: VIA Technologies, Inc. VT82x UHCI USB >> > 1.1 Controller (rev 50) 00:0b.2 USB Controller: VIA Technologies, >> > Inc. USB 2.0 (rev 51) 00:0c.0 FireWire (IEEE 1394): Texas >> > Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) 00:10.0 >> > IDE interface: ALi Corporation M5229 IDE (rev c4) 00:11.0 Bridge: >> > ALi Corporation M7101 Power Management Controller [PMU] 00:12.0 >> > Ethernet controller: National Semiconductor Corporation DP83815 >> > (MacPhyter) Ethernet Controller 01:05.0 VGA compatible controller: >> > ATI Technologies Inc Radeon IGP 330M/340M/350M >> >> I do not see the device in this list. Is this card known to be >> working? It should show up whether or not there is a driver for it. >> >> >> > WG511T: >> > doppleganger:~# lspci >> >> >> > 02:00.0 Ethernet controller: Atheros Communications Inc. >> > AR5212/AR5213 Multiprotocol MAC/baseband processor (rev 01) >> >> >> For Etch, madwifi is what you want. For Lenny (kernel 2.6.26), >> you want the built-in ath5k driver (should just work). >> >> >> Cheers, >> Kelly Clowers >> > > Thanks again ... Now, the "how stupid am I" question. > > How do I go about getting that kernel - currnetly its 2.6.18-6-686 Oops, lets keep this on the list. You could upgrade to Lenny (testing), or you could compile your own kernel, or you might be able to use say, an Ubuntu kernel. Or stay with 2.6.18 and use madwifi. Lenny has been frozen pending release for a while now, so it should be safe to use. My first choice would be to upgrade, and my second would be to use madwifi, but that is just me. It is up to you. Cheers, Kelly Clowers -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Next question: Netgear wireless help
On Wed, Dec 3, 2008 at 11:57, Chris <[EMAIL PROTECTED]> wrote: > On Wed, 3 Dec 2008 11:43:15 -0800 > "Kelly Clowers" <[EMAIL PROTECTED]> wrote: > >> On Wed, Dec 3, 2008 at 10:38, Chris <[EMAIL PROTECTED]> wrote: >> > Greetings folks, >> > >> > What is suggested I used to get either of my Netgear PCMCIA nics to >> > work? >> > >> > 1. MA401 >> > 2. WG511T >> >> What is the output of lspci for each of them? >> >> >> Cheers, >> Kelly Clowers >> >> > > > Thanks Kelly for the reply: > > MA401: > doppleganger:~# lspci > 00:00.0 Host bridge: ATI Technologies Inc RS200/RS200M AGP Bridge [IGP 340M] > (rev 02) > 00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 340M] > 00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link > Controller Audio Device (rev 02) > 00:07.0 ISA bridge: ALi Corporation M1533/M1535/M1543 PCI to ISA Bridge > [Aladdin IV/V/V+] > 00:08.0 Modem: ALi Corporation M5457 AC'97 Modem Controller > 00:0a.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller > (rev 02) > 00:0b.0 USB Controller: VIA Technologies, Inc. VT82x UHCI USB 1.1 > Controller (rev 50) > 00:0b.1 USB Controller: VIA Technologies, Inc. VT82x UHCI USB 1.1 > Controller (rev 50) > 00:0b.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) > 00:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 > Controller (PHY/Link) > 00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4) > 00:11.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU] > 00:12.0 Ethernet controller: National Semiconductor Corporation DP83815 > (MacPhyter) Ethernet Controller > 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon IGP > 330M/340M/350M I do not see the device in this list. Is this card known to be working? It should show up whether or not there is a driver for it. > WG511T: > doppleganger:~# lspci > 02:00.0 Ethernet controller: Atheros Communications Inc. AR5212/AR5213 > Multiprotocol MAC/baseband processor (rev 01) For Etch, madwifi is what you want. For Lenny (kernel 2.6.26), you want the built-in ath5k driver (should just work). Cheers, Kelly Clowers -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Next question: Netgear wireless help
Chris wrote: Greetings folks, What is suggested I used to get either of my Netgear PCMCIA nics to work? 1. MA401 2. WG511T Madwifi WG511T Chipset:AR5001 (V1&V2=5212) (V3=5213A) (b/g) URL:http://www.netgear.com/[...] Interface: PCMCIA Antenna Connector: Internal factory test connector : Hirose MS-156 Device Information: 0x0271:0012 Notes: It seems max. bit rate is 54Mbit/sec. http://madwifi.org/ Wayne -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Next question: Netgear wireless help
On Wed, 3 Dec 2008 11:43:15 -0800 "Kelly Clowers" <[EMAIL PROTECTED]> wrote: > On Wed, Dec 3, 2008 at 10:38, Chris <[EMAIL PROTECTED]> wrote: > > Greetings folks, > > > > What is suggested I used to get either of my Netgear PCMCIA nics to > > work? > > > > 1. MA401 > > 2. WG511T > > What is the output of lspci for each of them? > > > Cheers, > Kelly Clowers > > Let's try again... WG511T: doppleganger:~# lspci -m 00:00.0 "Host bridge" "ATI Technologies Inc" "RS200/RS200M AGP Bridge [IGP 340M]" -r02 "" "" 00:01.0 "PCI bridge" "ATI Technologies Inc" "PCI Bridge [IGP 340M]" "" "" 00:06.0 "Multimedia audio controller" "ALi Corporation" "M5451 PCI AC-Link Controller Audio Device" -r02 "Hewlett-Packard Company" "Device 0850" 00:07.0 "ISA bridge" "ALi Corporation" "M1533/M1535/M1543 PCI to ISA Bridge [Aladdin IV/V/V+]" "ALi Corporation" "ALi M1533 Aladdin IV/V ISA Bridge" 00:08.0 "Modem" "ALi Corporation" "M5457 AC'97 Modem Controller" "Hewlett-Packard Company" "Device 0850" 00:0a.0 "CardBus bridge" "Texas Instruments" "PCI1410 PC card Cardbus Controller" -r02 "" "" 00:0b.0 "USB Controller" "VIA Technologies, Inc." "VT82x UHCI USB 1.1 Controller" -r50 "Hewlett-Packard Company" "Device 0850" 00:0b.1 "USB Controller" "VIA Technologies, Inc." "VT82x UHCI USB 1.1 Controller" -r50 "Hewlett-Packard Company" "Device 0850" 00:0b.2 "USB Controller" "VIA Technologies, Inc." "USB 2.0" -r51 -p20 "Hewlett-Packard Company" "Device 0850" 00:0c.0 "FireWire (IEEE 1394)" "Texas Instruments" "TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)" -p10 "Hewlett-Packard Company" "Device 0850" 00:10.0 "IDE interface" "ALi Corporation" "M5229 IDE" -rc4 -pfa "Hewlett-Packard Company" "Device 0850" 00:11.0 "Bridge" "ALi Corporation" "M7101 Power Management Controller [PMU]" "Hewlett-Packard Company" "Device 0850" 00:12.0 "Ethernet controller" "National Semiconductor Corporation" "DP83815 (MacPhyter) Ethernet Controller" "Hewlett-Packard Company" "Device 0850" 01:05.0 "VGA compatible controller" "ATI Technologies Inc" "Radeon IGP 330M/340M/350M" "Hewlett-Packard Company" "Radeon IGP 345M" 02:00.0 "Ethernet controller" "Atheros Communications Inc." "AR5212/AR5213 Multiprotocol MAC/baseband processor" -r01 "Netgear" "Device 5b00" MA401: doppleganger:~# lspci -m 00:00.0 "Host bridge" "ATI Technologies Inc" "RS200/RS200M AGP Bridge [IGP 340M]" -r02 "" "" 00:01.0 "PCI bridge" "ATI Technologies Inc" "PCI Bridge [IGP 340M]" "" "" 00:06.0 "Multimedia audio controller" "ALi Corporation" "M5451 PCI AC-Link Controller Audio Device" -r02 "Hewlett-Packard Company" "Device 0850" 00:07.0 "ISA bridge" "ALi Corporation" "M1533/M1535/M1543 PCI to ISA Bridge [Aladdin IV/V/V+]" "ALi Corporation" "ALi M1533 Aladdin IV/V ISA Bridge" 00:08.0 "Modem" "ALi Corporation" "M5457 AC'97 Modem Controller" "Hewlett-Packard Company" "Device 0850" 00:0a.0 "CardBus bridge" "Texas Instruments" "PCI1410 PC card Cardbus Controller" -r02 "" "" 00:0b.0 "USB Controller" "VIA Technologies, Inc." "VT82x UHCI USB 1.1 Controller" -r50 "Hewlett-Packard Company" "Device 0850" 00:0b.1 "USB Controller" "VIA Technologies, Inc." "VT82x UHCI USB 1.1 Controller" -r50 "Hewlett-Packard Company" "Device 0850" 00:0b.2 "USB Controller" "VIA Technologies, Inc." "USB 2.0" -r51 -p20 "Hewlett-Packard Company" "Device 0850" 00:0c.0 "FireWire (IEEE 1394)" "Texas Instruments" "TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)" -p10 "Hewlett-Packard Company" "Device 0850" 00:10.0 "IDE interface" "ALi Corporation" "M5229 IDE" -rc4 -pfa "Hewlett-Packard Company" "Device 0850" 00:11.0 "Bridge" "ALi Corporation" "M7101 Power Management Controller [PMU]" "Hewlett-Packard Company" "Device 0850" 00:12.0 "Ethernet controller" "National Semiconductor Corporation" "DP83815 (MacPhyter) Ethernet Controller" "Hewlett-Packard Company" "Device 0850" 01:05.0 "VGA compatible controller" "ATI Technologies Inc" "Radeon IGP 330M/340M/350M" "Hewlett-Packard Company" "Radeon IGP 345M" -- Best regards, Chris () ascii ribbon campaign - against html e-mail /\ www.asciiribbon.org - against proprietary attachments "There's no place like 127.0.0.1" -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Next question: Netgear wireless help
On Wed, 3 Dec 2008 11:43:15 -0800 "Kelly Clowers" <[EMAIL PROTECTED]> wrote: > On Wed, Dec 3, 2008 at 10:38, Chris <[EMAIL PROTECTED]> wrote: > > Greetings folks, > > > > What is suggested I used to get either of my Netgear PCMCIA nics to > > work? > > > > 1. MA401 > > 2. WG511T > > What is the output of lspci for each of them? > > > Cheers, > Kelly Clowers > > Thanks Kelly for the reply: MA401: doppleganger:~# lspci 00:00.0 Host bridge: ATI Technologies Inc RS200/RS200M AGP Bridge [IGP 340M] (rev 02) 00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 340M] 00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 02) 00:07.0 ISA bridge: ALi Corporation M1533/M1535/M1543 PCI to ISA Bridge [Aladdin IV/V/V+] 00:08.0 Modem: ALi Corporation M5457 AC'97 Modem Controller 00:0a.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 02) 00:0b.0 USB Controller: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller (rev 50) 00:0b.1 USB Controller: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller (rev 50) 00:0b.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) 00:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) 00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4) 00:11.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU] 00:12.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon IGP 330M/340M/350M WG511T: doppleganger:~# lspci 00:00.0 Host bridge: ATI Technologies Inc RS200/RS200M AGP Bridge [IGP 340M] (rev 02) 00:01.0 PCI bridge: ATI Technologies Inc PCI Bridge [IGP 340M] 00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 02) 00:07.0 ISA bridge: ALi Corporation M1533/M1535/M1543 PCI to ISA Bridge [Aladdin IV/V/V+] 00:08.0 Modem: ALi Corporation M5457 AC'97 Modem Controller 00:0a.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 02) 00:0b.0 USB Controller: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller (rev 50) 00:0b.1 USB Controller: VIA Technologies, Inc. VT82x UHCI USB 1.1 Controller (rev 50) 00:0b.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51) 00:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) 00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4) 00:11.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU] 00:12.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller 01:05.0 VGA compatible controller: ATI Technologies Inc Radeon IGP 330M/340M/350M 02:00.0 Ethernet controller: Atheros Communications Inc. AR5212/AR5213 Multiprotocol MAC/baseband processor (rev 01) -- Best regards, Chris () ascii ribbon campaign - against html e-mail /\ www.asciiribbon.org - against proprietary attachments "There's no place like 127.0.0.1" -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Next question: Netgear wireless help
On Wed, Dec 3, 2008 at 10:38, Chris <[EMAIL PROTECTED]> wrote: > Greetings folks, > > What is suggested I used to get either of my Netgear PCMCIA nics to > work? > > 1. MA401 > 2. WG511T What is the output of lspci for each of them? Cheers, Kelly Clowers -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Next question: Netgear wireless help
Greetings folks, What is suggested I used to get either of my Netgear PCMCIA nics to work? 1. MA401 2. WG511T -- Best regards, Chris () ascii ribbon campaign - against html e-mail /\ www.asciiribbon.org - against proprietary attachments "There's no place like 127.0.0.1" -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
