Re: PCMCIA Smart Card Reader O2Micro SmartCardBus Reader V1.0
Justin, 8.12.2013: I have a problem with what I believe to be a pcmcia Smart Card Reader. I'm running Debian version jessie/sid. When I execute the lspcmcia -a command I get the following output: Socket 1 Device 0:[-- no driver --](bus ID: 1.0) Configuration:state: on [io 0x flags 0x100] [io 0x flags 0x100] [mem 0x flags 0x200] [mem 0x flags 0x200] [mem 0x flags 0x200] [mem 0x flags 0x200] Product Name: O2Micro SmartCardBus Reader V1.0 Identification:manf_id: 0xcard_id: 0x0001 prod_id(1): O2Micro (0x94f31211) prod_id(2): SmartCardBus Reader (0x4f67a249) prod_id(3): V1.0 (0xf28411a8) prod_id(4): --- (---) I have no experience with this card, but googling a little got me this: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=485516 It looks like there's no official debian package but there's a driver that people have used successfully and somebody even made an unofficial package a few years ago. (If that's out of date for recent kernels, maybe you can contact the author and ask for an update.) -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20131213100801.gb7...@cs.utexas.edu
Re: PCMCIA wifi card
On Mon, 25 Jan 2010 14:41:24 -0500, Christopher Judd in gmane.linux.debian.user wrote: Hi, I just received a used laptop (Toshiba Satellite 135-S125) from a colleague. I intend to install Debian on it, and I had a couple of questions. 1. Any problems running Debian on this laptop? Sorry can't tell you that; But I have installed Debian Sid on a Toshiba Satellite 1800 without any problem. 2. Any recommendations for a dependable pcmcia wireless card? I'm happy with my D-Link AirPlus G (DWL-G630) at around $30 Canadian. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Re: pcmcia bluetooth card intro questions
H.S. wrote: Hello, I do have any experience with PCMCIA bluetooth cards on laptop and have some questions. I have gone over some web pages about what these cards are, but my question are more of practical nature. This is on a laptop which has a slot for Type 2 PCMCIA (also called PC?) card. If I were to buy a PCMCIA bluetooth card and insert it into the slot, can I then use a bluethooth mouse and a bluetooth heatset, together, with the laptop without having to connect any kind of dongle to the PCMCIA card? What kind of cards are supported in Debian (Testing)? What I have mind, if it is possible, it to get a bluetooth card for the PCMCIA slot and use it for a mouse and a headset and probably also for a cell phone. Thanks. If you have USB on your laptop may I suggest using a USB Bluetooth adapter. They are smaller, cost less and uses less power than PCMCIA cards. Here is the lsusb result on the one I use. Bus 002 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) No need to install drivers. Plug N Play :) I've used this with several mobile phones and headsets. It also works with my bluetooth mouse but have not had the time to fully set it up and test it yet. I'm guessing that one of the reason you want to connect a mobile phone is to access the phonebook and calendar. I've had issue with this using several mobile phone access packages, especially with newer mobile phones. An easy solutions to this is to, on the phone, export all your contacts into a vCard file. You can then copy it to you computer via bluetooth. All the addressbook applications in Debian except Icedove's address book can read, edit, save, import, export vCard format. So now you can edit the contents of the vCard and export it back to the phone. You should delete all the contact from the phone first before you import the new/changed set of contacts back into the phone. Or you will end up with duplicate contacts on the phone. I think the same works for he calendar but I have not tried it yet. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Re: pcmcia bluetooth card intro questions
Steven Demetrius wrote: H.S. wrote: What kind of cards are supported in Debian (Testing)? What I have mind, if it is possible, it to get a bluetooth card for the PCMCIA slot and use it for a mouse and a headset and probably also for a cell phone. Thanks. If you have USB on your laptop may I suggest using a USB Bluetooth adapter. They are smaller, cost less and uses less power than PCMCIA cards. This is another question that came to mind when I searching a bit more about this topic. From your comments it looks like the USB bluetooth adapter provides exactly the same functionality as a PC card. When I was searching for pcmcia cards, I noticed that there is huge choice in USB bluetooth adapters as compared to pcmcia cards. Here is the lsusb result on the one I use. Bus 002 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) No need to install drivers. Plug N Play :) Very interesting. You have made some valid points in USB bluetooth adapters. I've used this with several mobile phones and headsets. It also works with my bluetooth mouse but have not had the time to fully set it up and test it yet. I'm guessing that one of the reason you want to connect a mobile phone is to access the phonebook and calendar. I've had issue with this using several mobile phone access packages, especially with newer mobile phones. Yes, that is what I had in mind. An easy solutions to this is to, on the phone, export all your contacts into a vCard file. You can then copy it to you computer via bluetooth. All the addressbook applications in Debian except Icedove's address book can read, edit, save, import, export vCard format. So now you can edit the contents of the vCard and export it back to the phone. You should delete all the contact from the phone first before you import the new/changed set of contacts back into the phone. Or you will end up with duplicate contacts on the phone. I think the same works for he calendar but I have not tried it yet. Nice to know. Thanks. -- Please reply to this list only. I read this list on its corresponding newsgroup on gmane.org. Replies sent to my email address are just filtered to a folder in my mailbox and get periodically deleted without ever having been read. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Re: pcmcia bluetooth card intro questions
H.S. wrote: Steven Demetrius wrote: H.S. wrote: What kind of cards are supported in Debian (Testing)? What I have mind, if it is possible, it to get a bluetooth card for the PCMCIA slot and use it for a mouse and a headset and probably also for a cell phone. Thanks. If you have USB on your laptop may I suggest using a USB Bluetooth adapter. They are smaller, cost less and uses less power than PCMCIA cards. This is another question that came to mind when I searching a bit more about this topic. From your comments it looks like the USB bluetooth adapter provides exactly the same functionality as a PC card. When I was searching for pcmcia cards, I noticed that there is huge choice in USB bluetooth adapters as compared to pcmcia cards. Here is the lsusb result on the one I use. Bus 002 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) No need to install drivers. Plug N Play :) Very interesting. You have made some valid points in USB bluetooth adapters. I've used this with several mobile phones and headsets. It also works with my bluetooth mouse but have not had the time to fully set it up and test it yet. I'm guessing that one of the reason you want to connect a mobile phone is to access the phonebook and calendar. I've had issue with this using several mobile phone access packages, especially with newer mobile phones. Yes, that is what I had in mind. An easy solutions to this is to, on the phone, export all your contacts into a vCard file. You can then copy it to you computer via bluetooth. All the addressbook applications in Debian except Icedove's address book can read, edit, save, import, export vCard format. So now you can edit the contents of the vCard and export it back to the phone. You should delete all the contact from the phone first before you import the new/changed set of contacts back into the phone. Or you will end up with duplicate contacts on the phone. I think the same works for he calendar but I have not tried it yet. Nice to know. Thanks. One more thing. The default setting for bluez in Debian needs to be changed in order to get it working. You need to edit the following file. /etc/bluetooth/hcid.conf You need to remark the (passkey 1234) line and add the pin_helper. under HCId options. Here is the content of my hcid.conf. ** # HCI daemon configuration file. # # HCId options options { # Automatically initialize new devices autoinit yes; # Security Manager mode # none - Security manager disabled # auto - Use local PIN for incoming connections # user - Always ask user for a PIN # security user; # Pairing mode # none - Pairing disabled # multi - Allow pairing with already paired devices # once - Pair once and deny successive attempts pairing multi; # Default PIN code for incoming connections #passkey 1234; pin_helper /usr/bin/bluez-pin; } # Default settings for HCI devices device { # Local device name # %d - device id # %h - host name name %h-%d; # Local device class class 0x000100; # Default packet type #pkt_type DH1,DM1,HV1; # Inquiry and Page scan iscan enable; pscan enable; # Default link mode # none - no specific policy # accept - always accept incoming connections # master - become master on incoming connections, #deny role switch on outgoing connections lm accept; # Default link policy # none- no specific policy # rswitch - allow role switch # hold- allow hold mode # sniff - allow sniff mode # park- allow park mode lp rswitch,hold,sniff,park; } ** With this setup when you try to connect the phone type in any 4 digit code in both the computer and phone when prompted. If you're not prompted then try to restart bluetooth. If you use KDE then install kbluetooth. For headsets the default code is since you can't enter a number in the headset. :) I've tested this setup wit Kbluetooth and it works very well. Have not tired it with Gnome but it should work. There maybe issue with KDE/Gnome pin_helper but I have not encountered any yet. Have fun :) Steven. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Re: pcmcia no ubuntu
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 21-11-2007 21:46, Marcio de Araujo Benedito wrote: Caros; Instalei o ubuntu 7.10 em um notebook e usei a placa de rede pcmcia como eth0 e a on-board como eth1. Depois de instalado, o sistema não levanta a pcmcia. Como fazer para que o pcmcia volte a funcionar e ocupe a eth0? Olá Marcio, Antes de mais nada, esta é uma lista de Debian, as pessoas por aqui tendem a ter uma experiência diferente, estão acostumadas a versões diferentes e a outros parâmetros como padrão, então desde já, sugiro que você utilize os canais oficiais de suporte para o Ubuntu, pois a ajuda tende a ser mais específica e melhor embasada. Geralmente há um serviço pcmcia e/ou módulo, se eles não foram iniciados/carregados é preciso fazê-lo. Você pode instalar o rcconf para ajustar o que inicia ou não durante a inicialização e através do /etc/modules configurar quais módulos são carregados. Verifique o que o dmesg diz sobre sua pcmcia. Não ficou exatamente claro se o problema é não iniciar automaticamente, ou se a PCMCIA não pega a eth0, ou se a PCMCIA funciona mas a placa de rede não... tente dar mais detalhes do que foi feito e de como foi feito. Abraço, - -- Felipe Augusto van de Wiel (faw) Debian. Freedom to code. Code to freedom! -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHRPJpCjAO0JDlykYRAgwxAJwI2+D3GTpXOpNiE9bGm4GyT0KmZACgxnn1 ydhFs/c0mMn4RJIIlmQmzGc= =D0gW -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Pcmcia express card
Il giorno Sun, 26 Aug 2007 09:58:15 -0400 Wayne Topa [EMAIL PROTECTED] ha scritto: Good luck Wayne thanks, i need it :) -- Andrea Corradi | Debian User | www.debian.org Fingerprint: A41E F6B0 DBDB F04C 4940 E411 30F3 CD62 57B1 8458 gpg --keyserver keyserver.linux.it --recv-key 57B18458 Please avoid sending me Word or PowerPoint attachments. http://www.gnu.org/philosophy/no-word-attachments.html signature.asc Description: PGP signature
Re: Pcmcia express card
Il giorno Sat, 25 Aug 2007 22:40:19 -0400 Wayne Topa [EMAIL PROTECTED] ha scritto: Sorry, I missed the 'express' in your question. I don't know if I have ever even heard of pcmcia express before. I don't know but Google could tell you, if your interested. I just search on google first ask here, i have found _only_ a card compatible with linux, and i don't know if it work with a free driver or not. Im searching for a people that have a pcmcia express that work with linux so im sure that it work :) Thanks Bye -- Andrea Corradi | Debian User | www.debian.org Fingerprint: A41E F6B0 DBDB F04C 4940 E411 30F3 CD62 57B1 8458 gpg --keyserver keyserver.linux.it --recv-key 57B18458 Please avoid sending me Word or PowerPoint attachments. http://www.gnu.org/philosophy/no-word-attachments.html signature.asc Description: PGP signature
Re: Pcmcia express card
[L]ash([EMAIL PROTECTED]) is reported to have said: Il giorno Sat, 25 Aug 2007 22:40:19 -0400 Wayne Topa [EMAIL PROTECTED] ha scritto: Sorry, I missed the 'express' in your question. I don't know if I have ever even heard of pcmcia express before. I don't know but Google could tell you, if your interested. I just search on google first ask here, i have found _only_ a card compatible with linux, and i don't know if it work with a free driver or not. Im searching for a people that have a pcmcia express that work with linux so im sure that it work :) http://en.wikipedia.org/wiki/ExpressCard Tells me that the voltage on the express cards is not compatable with pcmcia, so no, the cards I told you about will not work in an express slot. That page mentions the the Thinkpad T43, by Lenova, has an express slot. As Lenova claims to support Linux you might want to check with them. You might also check the linux-thinkpad mailing list for more information. As you did not say which card you found that worked on linux, I was unable to verify if there was a 'free driver' available for it or not. If you google with a search term of '(Card name and model) linux' you might find an answer. Good luck Wayne -- Man is the best computer we can put aboard a spacecraft ... and the only one that can be mass produced with unskilled labor. -- Wernher von Braun ___ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Pcmcia express card
[L]ash([EMAIL PROTECTED]) is reported to have said: Hi all I need to buy a ethernet pcmcia express card for my notebook (its integrated ethernet card is broken). Can anyone suggest me a device that work with linux!?? Thanks in advance Im sorry for my bad english What bad english? Ethernet controller: 3Com Corporation 3cXFEM656C 10/100 LAN+Winmodem CardBus [Tornado] 3Com Megahertz 10/100 LAN Cardbus Both of the above need a pigtail cable to connect to RJ-45. Each use a different cable. Wayne -- Real programmers don't bring brown-bag lunches. If the vending machine doesn't sell it, they don't eat it. Vending machines don't sell quiche. ___ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Pcmcia express card
Il giorno Sat, 25 Aug 2007 09:56:24 -0400 Wayne Topa [EMAIL PROTECTED] ha scritto: Ethernet controller: 3Com Corporation 3cXFEM656C 10/100 LAN+Winmodem CardBus [Tornado] 3Com Megahertz 10/100 LAN Cardbus but are this pcmcia express card? My notebook don't have the support for normal pcmcia card, only the express. Thanks -- Andrea Corradi | Debian User | www.debian.org Fingerprint: A41E F6B0 DBDB F04C 4940 E411 30F3 CD62 57B1 8458 gpg --keyserver keyserver.linux.it --recv-key 57B18458 Please avoid sending me Word or PowerPoint attachments. http://www.gnu.org/philosophy/no-word-attachments.html signature.asc Description: PGP signature
Re: Pcmcia express card
[L]ash([EMAIL PROTECTED]) is reported to have said: Il giorno Sat, 25 Aug 2007 09:56:24 -0400 Wayne Topa [EMAIL PROTECTED] ha scritto: Ethernet controller: 3Com Corporation 3cXFEM656C 10/100 LAN+Winmodem CardBus [Tornado] 3Com Megahertz 10/100 LAN Cardbus but are this pcmcia express card? My notebook don't have the support for normal pcmcia card, only the express. Sorry, I missed the 'express' in your question. I don't know if I have ever even heard of pcmcia express before. I don't know but Google could tell you, if your interested. Wayne -- Never say OOPS! always say Ah, Interesting! ___ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: pcmcia USrobotics wireless MAXg 125mb ethernet karti....
Vermez... On 2/19/07, Ozgur Karatas [EMAIL PROTECTED] wrote: bingo $ifconfig -a tam liste verir.. -- Ozgur Karatas http://www.ozgurkaratas.com/ -- Tolun ARDAHANLI [EMAIL PROTECTED] demiş ki: Merhabalar arkadaslar; uzun aradan sonra tekrardan beraberiz..;-)... gecenlerde satin aldigim ethernet kartini sisteme tanitamadim(pcmcia USRobotics wireless MAXg 125mb ethernet karti). Sonrasinda ayni donanima sahip fakat FC6 kurulu makinaya gidip denedigimde tanidi. Benim makinamda ise sadece unknown olarak geciyor. ekte lspci ve lshal ciktilarini gonrediyorum(debian ve FC6 ciktilari). -Tanitmak icin ayri birseyler kurmam yada yapmam gereken birsey varmi? -Network um tam kurulu olup olmadigini nasil anlarim?(cunku ifconfig dersem hicbir liste vermiyor. ama ifconfig eth1 yada ifconfig eth0 dersem donanim durumlarini gorebiliyorum. Onceden bu boyle degildi) bu konularda birisi yardimci olursa cok sevinirim. hepinize iyi calismalar diler saygi ve sevgilerimi... Tolun ARDAHANLI - No need to miss a message. Get email on-the-go with Yahoo! Mail for Mobile. Get started.
Re: pcmcia USrobotics wireless MAXg 125mb ethernet karti....
Vermez... On 2/21/07, blackwind [EMAIL PROTECTED] wrote: Vermez... On 2/19/07, Ozgur Karatas [EMAIL PROTECTED] wrote: bingo $ifconfig -a tam liste verir.. -- Ozgur Karatas http://www.ozgurkaratas.com/ -- Tolun ARDAHANLI [EMAIL PROTECTED] demiş ki: Merhabalar arkadaslar; uzun aradan sonra tekrardan beraberiz..;-)... gecenlerde satin aldigim ethernet kartini sisteme tanitamadim(pcmcia USRobotics wireless MAXg 125mb ethernet karti). Sonrasinda ayni donanima sahip fakat FC6 kurulu makinaya gidip denedigimde tanidi. Benim makinamda ise sadece unknown olarak geciyor. ekte lspci ve lshal ciktilarini gonrediyorum(debian ve FC6 ciktilari). -Tanitmak icin ayri birseyler kurmam yada yapmam gereken birsey varmi? -Network um tam kurulu olup olmadigini nasil anlarim?(cunku ifconfig dersem hicbir liste vermiyor. ama ifconfig eth1 yada ifconfig eth0 dersem donanim durumlarini gorebiliyorum. Onceden bu boyle degildi) bu konularda birisi yardimci olursa cok sevinirim. hepinize iyi calismalar diler saygi ve sevgilerimi... Tolun ARDAHANLI - No need to miss a message. Get email on-the-go with Yahoo! Mail for Mobile. Get started.
Re: PCMCIA cards in laptops: do they need to be mounted/unmounted when installed/removed?
Ken Heard wrote: PCMCIA cards in laptops: do they need to be mounted/unmounted when installed/removed like floppies, CF cards, etc.? Only if they contain a filesystem, otherwise as long as you aren't doing anything with the card at the time you yank it, everything should happen automagically on semirecent Debian installs. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA cards in laptops: do they need to be mounted/unmounted when installed/removed?
Ken Heard wrote: Thanks everyone for the replies. If I understand them correctly, the situation is as follows: PCMCIA cards can be hot plugged and hot unplugged just like for instance USB devices. Right. However, also like USB devices, if the PCMCIA card is or contains a mobile storage device, to gain access to the storage on the device it has to be mounted. Likewise, before such a PCMCIA card, like USB storage devices, is removed, it should be unmounted in the same manner. Right. As it happens, I still have a PCMCIA adapter for CF cards, which is what was used to connect CF cards to laptops before the days of USB ports on laptops. So I put a CF card in it and inserted it into a PCMCIA slot. pcccardctl ident returned: product info: HITACHI, FLASH, 5.0, manfid: 0x0007, 0x function: 4 (fixed disk) Dmesg however told me much more. It produced the following: Probing IDE interface ide2... hde: Hitachi XX.V.3.4.0.0, CFA DISK drive ide2 at 0x100-0x107,0x10e on irq 10 hde: max request size: 128KiB hde: 2002896 sectors (1025 MB) w/1KiB Cache, CHS=1987/16/63 hde: hde1 ide-cs: hde: Vpp = 0.0 Sure enough, I found a directory called /dev/hde1. By creating directory /media/pccfcard and running mount -t vfat /dev/hde1 /media/pccfcard I had complete access to the cf card. I then added an appropriate line to /etc/fstab, which I will test after the next time I boot my laptop. I would doublecheck the fstab(5) manpage to make sure you don't try to automount any filesystem that you don't intend to have connected each and every time the machine boots. http://ursine.ca/cgi-bin/dwww?type=runmanlocation=fstab/5 It is interesting that the adapter manufacturer is identified as Hitachi; whereas the adapter is labelled Sandisk. That's actually not that unusual. Much (most?) hardware is manufactured by one company, but distributed, labelled and sold as another brand. I also noticed that pccardctl includes the commands insert and eject. Since the cards can be hot inserted and removed, I wonder why have these two commands. Scripts that are automatically called when a device is inserted or ejected. Just because it acts like magic doesn't mean it is. :o) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA cards in laptops: do they need to be mounted/unmounted when installed/removed?
Ken Heard wrote: PCMCIA cards in laptops: do they need to be mounted/unmounted when installed/removed like floppies, CF cards, etc.? No need to mount/umount a PCMCIA wireless network card. When I remove my running RT2500 card in Etch, dmesg shows pccard: card ejected from slot 0 ACPI: PCI interrupt for device :02:00.0 disabled When I reinsert it: pccard: CardBus card inserted into slot 0 ACPI: PCI interrupt :02:00.0[A] - Link [LNKA] - GSI 11 (level, low) - IRQ 11 rt2500 1.1.0 CVS 2005/07/10 http://rt2x00.serialmonkey.com PCI: Setting latency timer of device :02:00.0 to 64 and my wireless connection is restored automagically. -- Chris. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA cards in laptops: do they need to be mounted/unmounted when installed/removed?
On Sat, Feb 17, 2007 at 01:40:30PM -0500, Ken Heard wrote: PCMCIA cards in laptops: do they need to be mounted/unmounted when installed/removed like floppies, CF cards, etc.? Not usually, but I suppose what type of card it is. I have a modem PCMCIA card which I just release whenever I feel like it. But if its some sort of storage device (if there is such a thing) then you *may* lose data. Also, how do you actually unmount one? -- Chris. == Don't forget to check that your /etc/apt/sources.lst entries point to etch and not testing, otherwise you may end up with a broken system once etch goes stable. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA cards in laptops: do they need to be mounted/unmounted when installed/removed?
Thanks everyone for the replies. If I understand them correctly, the situation is as follows: PCMCIA cards can be hot plugged and hot unplugged just like for instance USB devices. However, also like USB devices, if the PCMCIA card is or contains a mobile storage device, to gain access to the storage on the device it has to be mounted. Likewise, before such a PCMCIA card, like USB storage devices, is removed, it should be unmounted in the same manner. As it happens, I still have a PCMCIA adapter for CF cards, which is what was used to connect CF cards to laptops before the days of USB ports on laptops. So I put a CF card in it and inserted it into a PCMCIA slot. pcccardctl ident returned: product info: HITACHI, FLASH, 5.0, manfid: 0x0007, 0x function: 4 (fixed disk) Dmesg however told me much more. It produced the following: Probing IDE interface ide2... hde: Hitachi XX.V.3.4.0.0, CFA DISK drive ide2 at 0x100-0x107,0x10e on irq 10 hde: max request size: 128KiB hde: 2002896 sectors (1025 MB) w/1KiB Cache, CHS=1987/16/63 hde: hde1 ide-cs: hde: Vpp = 0.0 Sure enough, I found a directory called /dev/hde1. By creating directory /media/pccfcard and running mount -t vfat /dev/hde1 /media/pccfcard I had complete access to the cf card. I then added an appropriate line to /etc/fstab, which I will test after the next time I boot my laptop. It is interesting that the adapter manufacturer is identified as Hitachi; whereas the adapter is labelled Sandisk. I also noticed that pccardctl includes the commands insert and eject. Since the cards can be hot inserted and removed, I wonder why have these two commands. Regards, Ken Heard Toronto, Canada -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA cards in laptops: do they need to be mounted/unmounted when installed/removed?
Ken Heard [EMAIL PROTECTED]: Thanks everyone for the replies. If I understand them correctly, the situation is as follows: Very good, however: Sure enough, I found a directory called /dev/hde1. By creating directory /media/pccfcard and running mount -t vfat /dev/hde1 /media/pccfcard I had complete access to the cf card. I then added an appropriate line to /etc/fstab, which I will test after the next time I boot my laptop. No need to wait. Very few things in Unix/Linux require a reboot to take effect. From a prompt: mount /media/pccfcard should work right away, or tell you why it didn't. I also noticed that pccardctl includes the commands insert and eject. Since the cards can be hot inserted and removed, I wonder why have these two commands. So the hotplug/udev systems could do it for you. cardctl showed up a long time before hotplug and udev did. -- Any technology distinguishable from magic is insufficiently advanced. (*)http://www.spots.ab.ca/~keeling Linux Counter #80292 - -http://www.faqs.org/rfcs/rfc1855.htmlPlease, don't Cc: me. Spammers! http://www.spots.ab.ca/~keeling/emails.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: pcmcia USrobotics wireless MAXg 125mb ethernet karti....
bingo $ifconfig -a tam liste verir.. -- Ozgur Karatas http://www.ozgurkaratas.com/ -- Tolun ARDAHANLI [EMAIL PROTECTED] demiş ki: Merhabalar arkadaslar; uzun aradan sonra tekrardan beraberiz..;-)... gecenlerde satin aldigim ethernet kartini sisteme tanitamadim(pcmcia USRobotics wireless MAXg 125mb ethernet karti). Sonrasinda ayni donanima sahip fakat FC6 kurulu makinaya gidip denedigimde tanidi. Benim makinamda ise sadece unknown olarak geciyor. ekte lspci ve lshal ciktilarini gonrediyorum(debian ve FC6 ciktilari). -Tanitmak icin ayri birseyler kurmam yada yapmam gereken birsey varmi? -Network um tam kurulu olup olmadigini nasil anlarim?(cunku ifconfig dersem hicbir liste vermiyor. ama ifconfig eth1 yada ifconfig eth0 dersem donanim durumlarini gorebiliyorum. Onceden bu boyle degildi) bu konularda birisi yardimci olursa cok sevinirim. hepinize iyi calismalar diler saygi ve sevgilerimi... Tolun ARDAHANLI - No need to miss a message. Get email on-the-go with Yahoo! Mail for Mobile. Get started.
Re: PCMCIA cards in laptops: do they need to be mounted/unmounted when installed/removed?
On Sat, Feb 17, 2007 at 01:40:30PM EST, Ken Heard wrote: PCMCIA cards in laptops: do they need to be mounted/unmounted when installed/removed like floppies, CF cards, etc.? mount/umount are file system management commands. see man 8 mount .. in particular the NAME part and the first few lines of DESCRIPTION. NAME mount - mount a file system ... as to PC cards they are managed by the cardctl or pccardctl commands (depending on how recent your kernel is). see man cardctl or man pccardctl depending on how recent your kernel is. I happen to have a portable CD-ROM burner attached to my laptop via a PC card. If in need to check the current status of that PC card (in slot) 1 I could issue a: # pccardctl status 1 5V 16-bit PC Card function 0: [ready] Now, after inserting a data CD in this peripheral in order to access its contents I would have to mount the file system: # mount -t iso9660 /dev/cdrw0 /mnt/cdrw0 I can then cd - no pun intended - to /mnt/cdrw0 and apart from the fact that the files are necessarily read-only.. I can pretty much process its contents as I would my home directory. IOW, it is as if I had plugged the iso file system that lives on the CD-ROM into an available slot of my running file system, thereby giving myself and other users of the system access to its contents. If on the other hand I had inserted an audio CD in the peripheral I would not need to issue a mount command to listen to it. And if I did try to mount issue a mount command against the audio CD, I would get an error informing me that the medium does not contain a file system. To try and clarify further, I also have a PC network card in the other pcmcia slot of this laptop and clearly there would be no sense in trying to mount that card. HTH Thanks, cga -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA problem
On Thu, Oct 26, 2006 at 10:09:36AM -0500, Robotis Konstantinos wrote: I have Debian Sarge with kernel 2.6.8-2 and I want to install a wireless pcmcia card. The kernel is configured with every module related to PCMCIA as far as I am concerned and the pcmcia-cs package is also installed. The problem is that when the the /etc/init.d/pcmcia script starts I always get following: euklides:/usr/src# /etc/init.d/pcmcia start Starting PCMCIA services: using yenta_socket instead of i82365 cardmgr[6759]: no sockets found! done. Any suggestions? Install pcmciautils. apt-cache show pcmciautils. Read the stuff in /usr/share/doc/pcmciautils/ There are issues with wireless pcmcia, something about wireless not working in a cardbus socket. -- Chris. == ... the official version cannot be abandoned because the implication of rejecting it is far too disturbing: that we are subject to a government conspiracy of `X-Files' proportions and insidiousness. Letter to the LA Times Magazine, September 18, 2005. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [pcmcia]insertion automatique de module
Laurent FRANCOIS a écrit : Bonjour, Lorsque j'insere une carte son module est automatiquement insérer: $lsmod | grep prism ne donne rien J'insere la carte et hop $lsmod | grep prism prism5447624 0 Quelle est le fichier qui gère tout cela?. Merci c'est le hotplug, ou udev selon ton kernel qui informe directement le gestionnaire pcmcia. -- dominix -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [pcmcia]insertion automatique de module
Vanuxem Grégory a écrit : Le samedi 14 octobre 2006 à 07:20 +1100, Laurent FRANCOIS a écrit : Bonjour, Lorsque j'insere une carte son module est automatiquement insérer: $lsmod | grep prism ne donne rien J'insere la carte et hop $lsmod | grep prism prism5447624 0 Quelle est le fichier qui gère tout cela?. Normalement /boot/vmlinuz est un lien vers ce fichier (qui devrait être /boot/vmlinuz-`uname -r`). Mais fais attention si tu veux l'éditer, c'est un fichier binaire :-) he non, perdu, ca c'est le noyau utlisé. c'est bien lui qui gere tout, mais c'est pas par la qu'on le configure. -- dominix -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [pcmcia]insertion automatique de module
Le dimanche 15 octobre 2006 à 10:53 -1000, DoMinix a écrit : Vanuxem Grégory a écrit : Le samedi 14 octobre 2006 à 07:20 +1100, Laurent FRANCOIS a écrit : Bonjour, Lorsque j'insere une carte son module est automatiquement insérer: $lsmod | grep prism ne donne rien J'insere la carte et hop $lsmod | grep prism prism5447624 0 Quelle est le fichier qui gère tout cela?. Normalement /boot/vmlinuz est un lien vers ce fichier (qui devrait être /boot/vmlinuz-`uname -r`). Mais fais attention si tu veux l'éditer, c'est un fichier binaire :-) he non, perdu, ca c'est le noyau utlisé. c'est bien lui qui gere tout, mais c'est pas par la qu'on le configure. J'ai vu qu'il semblerait que je me sois trompé, et en effet je ne sais pas pour le pcmcia. Sinon je ne parlais pas de la configuration, juste du chargement automatique de modules. C'est pour cela aussi que j'ai dit « généralement » en parlant du fichier /etc/modules (cette partie du message a été effacé) car il y a d'autres manières (expliquées dans d'autres réponse). Bien désolé pour la gène occasionnée. Greg -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [pcmcia]insertion automatique de module
Vanuxem Grégory wrote: Le samedi 14 octobre 2006 à 07:20 +1100, Laurent FRANCOIS a écrit : Bonjour, Lorsque j'insere une carte son module est automatiquement insérer: $lsmod | grep prism ne donne rien J'insere la carte et hop $lsmod | grep prism prism5447624 0 Quelle est le fichier qui gère tout cela?. Normalement /boot/vmlinuz est un lien vers ce fichier (qui devrait être /boot/vmlinuz-`uname -r`). Mais fais attention si tu veux l'éditer, c'est un fichier binaire :-) En fait c'est une option du noyau, voilà sa documentation: Ca veut dire que si j'ai le bon module pour mon device en dur dans le kernel ou en module et qu'il est bien chargé par modeprobe (automatiquement ou par un modprobe à la mano) alors le noyau va reconnaitre le device et utiliser le bon module? Ca veut dire qu'il n'y a pas de fichier du genre: mondevice id cemodule Je sais pas si je suis tres clair? Merci
Re: [pcmcia]insertion automatique de module
Bonjour, Le samedi 14 octobre 2006, Laurent FRANCOIS a écrit... Lorsque j'insere une carte son module est automatiquement insérer: $lsmod | grep prism ne donne rien J'insere la carte et hop $lsmod | grep prism prism5447624 0 Quelle est le fichier qui gère tout cela?. Je pense qu'il y en a plusieurs : Il y a interfaces, avec sa ligne 'allow hotplug'. Il y a ce qu'on peut trouver dans /etc/pcmcia, je suppose. Et l'intervention de udev dans /etc/udev (les règles concernant hotplug et net). -- jm A.E.L. Sarl (R.C.S CASTRES 490843240) http://www.affaires-en-ligne.com -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [pcmcia]insertion automatique de module
Le samedi 14 octobre 2006 à 07:20 +1100, Laurent FRANCOIS a écrit : Bonjour, Lorsque j'insere une carte son module est automatiquement insérer: $lsmod | grep prism ne donne rien J'insere la carte et hop $lsmod | grep prism prism5447624 0 Quelle est le fichier qui gère tout cela?. Normalement /boot/vmlinuz est un lien vers ce fichier (qui devrait être /boot/vmlinuz-`uname -r`). Mais fais attention si tu veux l'éditer, c'est un fichier binaire :-) En fait c'est une option du noyau, voilà sa documentation: Normally when you have selected some parts of the kernel to be created as kernel modules, you must load them (using modprobe command) before you can use them. If you say Y here, some parts of the kernel will be able to load modules automatically: when a part of the kernel needs a module, it runs modprobe with the appropriate arguments, thereby loading the module if it is available. If unsure, say Y. Donc c'est le kernel qui s'en occupe et si on veut des modules non-automatiquement chargés on les met généralement dans le fichier /etc/modules. Greg -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA ISDN Karte
Thomas Eibich wrote: Hi, gibt es beim Kauf einer PCMCIA ISDN Karte für mein Notebook mit Etch etwas zu beachten? Chipsatz oder so? Für Hinweise bin ich Euch sehr dankbar. Moin Thomas, ich hatte diese Frage neulich auch an die Liste gestellt und genauso viele Antworten bekommen wie Du. Nach einiger Googelei habe ich mir dann eine Fritz-PCMCIA-Karte gekauft, weil ich für die PCI-Version Treiber gefunden habe und schonmal erfolgreich einkompiliert habe. Allerdings habe ich mich am Schleppi noch nicht drangemacht GHruß, Boris
Re: PCMCIA ISDN Karte
On Wed, 11 Oct 2006 09:29:04 +0200, Boris Andratzek [EMAIL PROTECTED] wrote: Thomas Eibich wrote: Hi, gibt es beim Kauf einer PCMCIA ISDN Karte für mein Notebook mit Etch etwas zu beachten? Chipsatz oder so? Für Hinweise bin ich Euch sehr dankbar. Moin Thomas, ich hatte diese Frage neulich auch an die Liste gestellt und genauso viele Antworten bekommen wie Du. Nach einiger Googelei habe ich mir dann eine Fritz-PCMCIA-Karte gekauft, weil ich für die PCI-Version Treiber gefunden habe und schonmal erfolgreich einkompiliert habe. Allerdings habe ich mich am Schleppi noch nicht drangemacht GHruß, Boris Da spucken die Suchmaschinen ja eigentlich (finde ich) auch relativ schnell etwas aus (zumindest AllTheWeb http://tinyurl.com/jc5gb); folgender Link war unter den Ersten: http://www.linux.com/howtos/Hardware-HOWTO/pcmcia.shtml Scheint mir eine ganz gute Ausgangsbasis zu sein? (Aber vielleicht habe ich da ja auch mal wieder irgendwas Wesentliches übersehen?) Viel Erfolg, Alek -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: PCMCIA question
On Tue, Oct 10, 2006 at 01:53:14PM -0400, Curt Howland wrote: Quick question about PCMCIA cards. I bought a Linksys 802.11g card to repace the 802.11b card, in a 1998 vintage laptop. When I put the new card in, I get the error Cardbus not supported. I'd imagine your laptop only supports 16-bit PCMCIA, not 32-bit Cardbus (ie, your laptop is too old for the card). Have a look at http://en.wikipedia.org/wiki/Cardbus. It explains the difference. Cheers, Paul -- Paul Dwerryhouse| PGP Key ID: 0x6B91B584 A look at Ubuntu Server Edition: http://nepotismia.com/review/ubuntu/server/6.06/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA Modem?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA512 M G Berberich schrieb: Weiß jemand ob das »PCMCIA Modem 56« von Reichelt unter Linux funktioniert? Oder kennt jemand ein PCMCIA-Modem das unter Linux anstandslos läuft? k.a was reichelt dort verbaut hat aber ein psion dacom 56k pcmcia modem (gold card) läuft. http://tuxmobil.org/pcmcia_ci10217.html - -- * Stefan Bauer * * Bavaria / Germany / Chiemsee * * [EMAIL PROTECTED] * * GPG ID: D5176489 * * www.plzk.de . www.edv-fix.de . www.lug-ts.de * * * -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.5 (MingW32) iD8DBQFFDWSHAtCt2tUXZIkRCuAkAJ9bFhAxlgp7GO4E0i5Rwy9KGlWIAACg6JlX PR1Ck7TYKw2bBARbGt7H4g4= =dX23 -END PGP SIGNATURE- smime.p7s Description: S/MIME Cryptographic Signature
Re: PCMCIA KARTI tanıtamıyorum!!!!
Paz 03 Eyl 2006 15:12 sularında, NIzOSARI şunları yazmıştı: selam arkadaslar benim bir vaio notebook um war; ve bu notebook uma US ROBOTICS PCMCIA kartı aldım ve bu kartı yaklasık 1 yıldan berı tanıtamadım. girmediğim forum denemediğim yol kalmadı. bana tam anlamıyla acıklıyacak bı arkadas warsa gerceketen cok sevinecem. debian 2.6.14-2-386 kullanıyorum. artık linux umla wireless kullanmak istiyorum ... Selam, Daha bugün bu listeye bir ileti gönderildi, özellikle bu konu ile ilgili: -- Yönlendirilmiş ileti -- Subject: kablosuz ağ tarifi Date: Paz 03 Eyl 2006 01:15 From: Can Kavaklıoğlu To: debian-user-turkish Merhabalar, Eğer faydalananlar olursa çok sevinirim: Debian GNU/Linux'da Kablosuz Ağ (Kablosuz ağ macerasının yazılmış hali) http://cankavaklioglu.name.tr/dka.html Herkese selamlar. Can Kavaklıoğlu -- Yönlendirilmiş ileti sonu -- Bu belge işinizi görmedi mi? Neyi yapamadığınızı belirtirseniz belki belge yazarına nelere dikkat etmesi gerektiği konusunda yardımcı olmuş olursunuz hem de belki sizin işiniz de görülür. Esen kalın, Nilgün
Re: PCMCIA-Controller wird nicht gefunden
Am Dienstag, 29. August 2006 12:34 schrieb Lars Thielecke: Hallo liebe Leser der Liste, Hallo ich habe ein etwas verzwicktes Problem. Da ich ein Subnotebook ohne Laufwerke verwende, habe ich mein Debian Etch mittels meines alten Notebook auf die Platte installiert und diese dann in das neue Gerät eingesetzt (USB-Installation wollte leider nicht funktionieren). Nun läuft auch alles, bis auf den PCMCIA-Adapter. Das Infocenter teilt mir mit: Kein Controller gefunden, die WLAN-Karte, die ich in den Slot eingesetzt habe, blinkt auch nur sporadisch. Hat jemand eine Idee, wie ich dem Rechner mitteilen kann, dass doch ein Controller vorhanden ist? - Um welches Notebook handelt es sich? - Was sagt lspci? - Welcher Kernel? Die PCMCIA Treiber sind normalerweise im Kernel oder müssen als Modul geladen werden deshalb ist es wichtig zu wissen um welchen Chipsatz es sich handelt. Gruß, Lars Gruß Alex
Re: PCMCIA-Controller wird nicht gefunden
Hallo, Alexander Syring schrieb: Am Dienstag, 29. August 2006 12:34 schrieb Lars Thielecke: Hallo liebe Leser der Liste, Hallo ich habe ein etwas verzwicktes Problem. Da ich ein Subnotebook ohne Laufwerke verwende, habe ich mein Debian Etch mittels meines alten Notebook auf die Platte installiert und diese dann in das neue Gerät eingesetzt (USB-Installation wollte leider nicht funktionieren). Nun läuft auch alles, bis auf den PCMCIA-Adapter. Das Infocenter teilt mir mit: Kein Controller gefunden, die WLAN-Karte, die ich in den Slot eingesetzt habe, blinkt auch nur sporadisch. Hat jemand eine Idee, wie ich dem Rechner mitteilen kann, dass doch ein Controller vorhanden ist? - Um welches Notebook handelt es sich? - Was sagt lspci? - Welcher Kernel? Es handelt sich um ein X30 Thinkpad von IBM. Kernel ist 2.6.16-2 auf einer i686-Maschine. lspci gibt folgendes zurück: 00:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 04) 00:02.0 VGA compatible controller: Intel Corporation 82830 CGC [Chipset Graphics Controller] (rev 04) 00:02.1 Display controller: Intel Corporation 82830 CGC [Chipset Graphics Controller] 00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #1) (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #2) (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #3) (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42) 00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 (rev 02) 00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 02) 00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02) 00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02) 01:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a8) 01:00.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a8) 01:00.2 FireWire (IEEE 1394): Ricoh Co Ltd R5C552 IEEE 1394 Controller 01:08.0 Ethernet controller: Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 42) 02:00.0 Ethernet controller: Atheros Communications, Inc. AR5212 802.11abg NIC (rev 01) Beim Atheros handelt es sich auf um die WLAN-Karte. Allerdings erhalte ich im Infocenter unter PCMCIA nach wie vor die Anzeige, dass der Controller nicht gefunden werden kann. Auch im Kontrollzentrum wird die Karte nicht als Netzwerkgerät gefunden, wie es bei meinem alten Notebook mit dieser Karte der Fall war. Die Karte ist übrigens eine Netgear WG511T. Die PCMCIA Treiber sind normalerweise im Kernel oder müssen als Modul geladen werden deshalb ist es wichtig zu wissen um welchen Chipsatz es sich handelt. Gruß, Lars Gruß Alex Schon mal Danke für die Hilfe :) -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: PCMCIA-Controller wird nicht gefunden
Hi Lars, Lars Thielecke [EMAIL PROTECTED] wrote: Alexander Syring schrieb: Am Dienstag, 29. August 2006 12:34 schrieb Lars Thielecke: Nun läuft auch alles, bis auf den PCMCIA-Adapter. Das Infocenter teilt mir mit: Kein Controller gefunden, die WLAN-Karte, die ich in den Slot eingesetzt habe, blinkt auch nur sporadisch. Hat jemand eine Idee, wie ich dem Rechner mitteilen kann, dass doch ein Controller vorhanden ist? - Um welches Notebook handelt es sich? - Was sagt lspci? - Welcher Kernel? Es handelt sich um ein X30 Thinkpad von IBM. Kernel ist 2.6.16-2 auf einer i686-Maschine. lspci gibt folgendes zurück: 01:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a8) 01:00.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev a8) Eventuell bietet Dein Kernel keine Unterstützung für diesen Controller. Schau mal was bei Deinem Kernel aktiviert ist. egrep ^CONF.*(PCCARD|PCMCIA|CARDBUS) /boot/config-`uname -r` Der Controller müsste vom Modul yenta_socket unterstützt werden. Gruß Frank -- echo [100Q]sy[ of beer]so[la[[[No more]P]sg]sc[n]sgdd0=clgx [ bottle]Pla1!=m]sb[[s]P]sm99sa[lbxloP[ on the wall, ] PlbxloP[.]P10aP[Take one down and pass it around. ]Pla 1-salbxloP[ on the wall.]P10adPPla0=ylfx]dsfxq|dc
Re: PCMCIA -Problem nach Update von Kernel 2.2 nach 2.4
On Mon, Jul 10, 2006 at 07:28:15AM +0200, Niels Stargardt wrote: Hmm hier mal die Ausgaben bei beiden Kerneln: Linux tine 2.4.18-1-686 #1 Wed May 17 21:26:54 UTC 2006 i686 unknown Module Size Used byNot tainted pcmcia_core38688 0 apm 8892 1 (autoclean) af_packet 11432 0 (unused) rtc 5400 0 (autoclean) ext2 30400 1 (autoclean) ide-disk6592 2 (autoclean) ide-probe-mod 7968 0 (autoclean) ide-mod 129420 2 (autoclean) [ide-disk ide-probe-mod] ext3 56544 0 (autoclean) jbd35032 0 (autoclean) [ext3] unix 13380 5 (autoclean) /lib/modules/2.4.18-1-686/kernel/drivers/pcmcia/i82365.o: init_module: No such device /lib/modules/2.4.18-1-686/kernel/drivers/pcmcia/i82365.o: insmod /lib/modules/2.4.18-1-686/kernel/drivers/pcmcia/i 82365.o failed /lib/modules/2.4.18-1-686/kernel/drivers/pcmcia/i82365.o: insmod i82365 failed Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters modprobe: pre-install ds failed modprobe: insmod pcnet_cs failed Wurde bei 2.4 nicht i82365 durch yenta_socket ersetzt? Wenn ja, versuch es doch mal mit PCIC=yenta_socket in /etc/default/pcmcia. Laut http://groups.google.de/group/linux.debian.user.german/browse_frm/thread/86b421109b4362e2/ee337bf43c0e7017?lnk=stq=reising+yentarnum=1#ee337bf43c0e7017 hat das beim Wechsel von 2.2.10 auf 2.4.24 geholfen. -- Nicht Absicht unterstellen, wenn auch Dummheit ausreicht! pgpm7Jxg3UxGM.pgp Description: PGP signature
Re: PCMCIA -Problem nach Update von Kernel 2.2 nach 2.4
On Sun, 9 Jul 2006 21:36:47 +0200 Niels Stargardt [EMAIL PROTECTED] wrote: ich betreibe hier ein Notebook mit Debian Woody und Kernel 2.2 als Server. Bei dem Notebook ist das Display kaputt und es ist sehr frickelig ein Monitor anzuschliessen. Ich habe versucht auf den 2.4-Kernel zu wechseln. Das System bootet auch, ist aber anschließend nicht per Netz ansprechbar. Leider weiss ich nicht wie ich den Chipsatz von der PCMCIA-Netzwerkkarte herausbekomme. Ich hatte ursprünglich mal eine D-Link DFE-650TXD-Karte benutzt, die ich ausgetauscht habe, ohne etwas konfigurieren zu müssen. Sie sind also vermutlich gleich. Evtl. weiss jemand den Befehl um den Chipsatz abzufragen (Die Karte ist auch nicht so leicht rauszuziehen)? Also wenn ich mich nicht irre, ist lspci intelligent genug auch pcmcia Karten anzuzeigen. (Zumindest unter Sid mit 2.6.x ;-)) Google mit dem passenden String gefüttert sollte dir genug Anhaltspunkte zum Thema Chipsatz und Treiber geben. Ich würde übrigens auf der älteren Hardware dennoch einen 2.6.x empfehlen, der ist etwas performanter wegen den I/O Schedulern. ein modprobe pcnet_cs ergibt folgendes /lib/modules/2.4.18-1-686/kernel/drivers/pcmcia/ds.o: init_module: Operation not permitted /lib/modules/2.4.18-1-686/kernel/drivers/pcmcia/ds.o: insmod /lib/modules/2.4.18-1-686/kernel/drivers/pcmcia/ds.o failed /lib/modules/2.4.18-1-686/kernel/drivers/pcmcia/ds.o: insmod pcnet_cs failed Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters Die Konfiguration ist also nicht rund. Ich verstehe nur nicht wieso ich die Karte anders konfigurieren muss? Und wo stelle ich diese Parameter ein? müsstest du per modprobe modul parameter=wert regeln können, modinfo modul bringt eine Liste der möglichen Parameter mit. -- ^^^| Evgeni -SargentD- Golov ([EMAIL PROTECTED]) d(O_o)b | PGP-Key-ID: 0xAC15B50C -|- | WWW: http://www.die-welt.net ICQ: 54116744 / \| IRC: #sod @ irc.german-freakz.net Fuer windows hab keine Zeit weil wenn ich nachhause komm will ich lieber poppen und nich noch mein OS reparieren (Therion - german-freakz.net) pgpkis5IQVbO8.pgp Description: PGP signature
Re: PCMCIA -Problem nach Update von Kernel 2.2 nach 2.4
On 09.07.06 21:49:49, Evgeni Golov wrote: On Sun, 9 Jul 2006 21:36:47 +0200 Niels Stargardt [EMAIL PROTECTED] wrote: Ich würde übrigens auf der älteren Hardware dennoch einen 2.6.x empfehlen, der ist etwas performanter wegen den I/O Schedulern. Wofuer man aber auch entsprechende Anwendungen braucht. Ausserdem (siehe anderen Thread von Niels von heute nachmittag) ist die Hardware so lahm, das das keinen Unterschied macht. Ausserdem gibts in Woody keinen 2.6er Kernel und er sollte erstmal einen Kernel zum laufen bekommen bevor er das dist-upgrade auf Sarge macht. Und einen 2.6er in Woody zu installieren ist vmtl. deutlich mehr Arbeit als das Modul fuer die Karte korrekt zu laden. Andreas -- Write yourself a threatening letter and pen a defiant reply. -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: PCMCIA -Problem nach Update von Kernel 2.2 nach 2.4
On Sun, 9 Jul 2006 21:49:49 +0200 Evgeni Golov [EMAIL PROTECTED] wrote: vermutlich gleich. Evtl. weiss jemand den Befehl um den Chipsatz abzufragen (Die Karte ist auch nicht so leicht rauszuziehen)? Also wenn ich mich nicht irre, ist lspci intelligent genug auch pcmcia Karten anzuzeigen. (Zumindest unter Sid mit 2.6.x ;-)) Google mit dem passenden String gefüttert sollte dir genug Anhaltspunkte zum Thema Chipsatz und Treiber geben. tine:~# lspci 00:00.0 Host bridge: Intel Corp. 440BX/ZX - 82443BX/ZX Host bridge (AGP disabled) (rev 03) 00:02.0 CardBus bridge: Toshiba America Info Systems ToPIC97 (rev 05) 00:02.1 CardBus bridge: Toshiba America Info Systems ToPIC97 (rev 05) 00:04.0 VGA compatible controller: Trident Microsystems Cyber 9525 (rev 49) 00:05.0 Bridge: Intel Corp. 82371AB PIIX4 ISA (rev 02) 00:05.1 IDE interface: Intel Corp. 82371AB PIIX4 IDE (rev 01) 00:05.2 USB Controller: Intel Corp. 82371AB PIIX4 USB (rev 01) 00:05.3 Bridge: Intel Corp. 82371AB PIIX4 ACPI (rev 02) 00:07.0 Communication controller: Lucent Microelectronics 56k WinModem (rev 01) 00:0a.0 Communication controller: Toshiba America Info Systems FIR Port (rev 23) 00:0c.0 Multimedia audio controller: ESS Technology ES1978 Maestro 2E (rev 10) Also negativ, lspci erkennt die Karte nicht. Ich würde übrigens auf der älteren Hardware dennoch einen 2.6.x empfehlen, der ist etwas performanter wegen den I/O Schedulern. Performance ist kein Problem. Ich will vor allem jetzt erstmal Woody auf 2.4 kriegen. ein modprobe pcnet_cs ergibt folgendes /lib/modules/2.4.18-1-686/kernel/drivers/pcmcia/ds.o: init_module: Operation not permitted /lib/modules/2.4.18-1-686/kernel/drivers/pcmcia/ds.o: insmod /lib/modules/2.4.18-1-686/kernel/drivers/pcmcia/ds.o failed /lib/modules/2.4.18-1-686/kernel/drivers/pcmcia/ds.o: insmod pcnet_cs failed Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters Die Konfiguration ist also nicht rund. Ich verstehe nur nicht wieso ich die Karte anders konfigurieren muss? Und wo stelle ich diese Parameter ein? müsstest du per modprobe modul parameter=wert regeln können, modinfo modul bringt eine Liste der möglichen Parameter mit. Hmm hier mal die Ausgaben bei beiden Kerneln: Linux tine 2.4.18-1-686 #1 Wed May 17 21:26:54 UTC 2006 i686 unknown Module Size Used byNot tainted pcmcia_core38688 0 apm 8892 1 (autoclean) af_packet 11432 0 (unused) rtc 5400 0 (autoclean) ext2 30400 1 (autoclean) ide-disk6592 2 (autoclean) ide-probe-mod 7968 0 (autoclean) ide-mod 129420 2 (autoclean) [ide-disk ide-probe-mod] ext3 56544 0 (autoclean) jbd35032 0 (autoclean) [ext3] unix 13380 5 (autoclean) /lib/modules/2.4.18-1-686/kernel/drivers/pcmcia/i82365.o: init_module: No such device /lib/modules/2.4.18-1-686/kernel/drivers/pcmcia/i82365.o: insmod /lib/modules/2.4.18-1-686/kernel/drivers/pcmcia/i 82365.o failed /lib/modules/2.4.18-1-686/kernel/drivers/pcmcia/i82365.o: insmod i82365 failed Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters modprobe: pre-install ds failed modprobe: insmod pcnet_cs failed filename: /lib/modules/2.4.18-1-686/kernel/drivers/net/pcmcia/pcnet_cs.o description: NE2000 compatible PCMCIA ethernet driver author: David Hinds [EMAIL PROTECTED] license: GPL parm:irq_mask int parm:irq_list int array (min = 1, max = 4) parm:if_port int parm:use_big_buf int parm:mem_speed int parm:delay_output int parm:delay_time int parm:use_shmem int parm:full_duplex int parm:hw_addr int array (min = 6, max = 6) filename:/lib/modules/2.4.18-1-686/kernel/drivers/net/8390.o description: none author: none license: GPL filename:/lib/modules/2.4.18-1-686/kernel/drivers/pcmcia/ds.o description: PCMCIA Driver Services 3.1.22 author: David Hinds [EMAIL PROTECTED] license: Dual MPL/GPL Sun Jul 9 20:25:33 CEST 2006 Linux tine 2.2.20-idepci #1 Sat Apr 20 12:45:19 EST 2002 i686 unknown Module Size Used by pcnet_cs 12644 1 83906088 0 [pcnet_cs] ds 6400 2 [pcnet_cs] i82365 22672 2 pcmcia_core45824 0 [pcnet_cs ds i82365] af_packet 6136 0 (unused) filename:/lib/modules/2.2.20-idepci/pcmcia/pcnet_cs.o description: NE2000 compatible PCMCIA ethernet driver author: David Hinds [EMAIL PROTECTED] license: none parm:irq_mask int parm:irq_list int array (min = 1, max = 4) parm:if_port int parm:use_big_buf int parm:mem_speed int parm:delay_output int parm:delay_time int parm:
Re: PCMCIA en antiguo Acer Travelmate 527TE
Manolo: Le he instalado una testing, con núcleo 2.6.15, y todo me funciona muy bien, salvo las PCMCIA, que creo que no las reconoce. Sólo he pinchado una tarjeta WiFi (USR2210) y ni siquiera se digna a identificar sus características mediante 'pccardctl' que se encuentra en el paquete 'pcmciautils'. He resuelto el problema, al menos por el tejado (ya me funciona la tarjeta WiFi). Sin embargo, todos los síntomas de aparente desapego a los slots PCMCIA continúan. Es posible que los nuevos núcleos usen de forma distinta los /sys y /proc; pero incluso el paquete 'pcmciautils', diseñado para núcleos nuevos, no consigue leer el firmware de la tarjeta pinchada ('pccardctl ident'). En fin, no importa el camino sino el objetivo. Atacando el problema como un asunto de falta de drivers de la tarjeta concreta WiFi (US Robotics, USR2210) he podido poco a poco localizar el driver y la base de datos de recursos necesaria. Por si le sirve a alguien. -- Manuel Pancorbo Castro http://bitakoro.blogspot.com/
Re: PCMCIA-Slot für Fasadeneinbau?
Ich suche für einen PC (!!!) einen PCMCIA-Adapter für den Einbau in einen 35 oder 525 Slot, da ich die Karte öfters wechseln muß. Nun hatte ich mir sowas besorgt (am IDE-Port), nur wird der Chip von Linux nicht erkannt. Prinzipiell benötige ich den Slot zum Testen von PCMCIA Hardware aller Art, also FireWire, USB, Ethernet, WiFi, GSM, MassStorage,... Hat jemand sowas im einsatz? Wenn ja, welches Modell und wo bekomme ich es? Muss es unbedingt in einen Frontslot einbaubar sein? Ich hab sowas für den PCI-Slot, bei km-elektronik kostet das knapp 20€. deborah -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: PCMCIA-Slot für Fasadeneinbau?
Hi, Ich suche für einen PC (!!!) einen PCMCIA-Adapter für den Einbau in einen 35 oder 525 Slot, da ich die Karte öfters wechseln muß. Hat jemand sowas im einsatz? Nö, habe ich nicht. Aber unter http://www.psism.com/reader.htm#PCI sind drei PCI Universal Front-Loading PCMCIA Card Reader/Writer gelistet, die explizit Linux-tauglich sind. Da sollte was für Dich dabei sein. hth Hiro -- Hi! I'm a .sig virus! Copy me to your .sig! -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject unsubscribe. Probleme? Mail an [EMAIL PROTECTED] (engl)
Re: PCMCIA problem
Tack för alla tips ang. PCMCIA. Det visade sig dock, lite pinsamt, vara ett hårdvarurelaterat problem jag drabbats av. Nätverkskortet var helt enkelt trasigt visade det sig efter många om och men. MVH Pär Lindén Karl Hammar wrote: Johan Mattsson wrote: Hej. Pär Lindén wrote: På denna har jag installerat Kanotix, 100 procent kompatibel med Debian Sid men med en customkernel och lite andra fix. Fram till nu har jag anslutit till internet via ett externt nätverkskort, som jag anslutit till USB porten. Detta har fungerat utan problem. Nu har jag skaffat ett ethernetkort (PCcard/Cardbus tror jag) till PCMCIA slotten. Detta fungerar dock inte alls. Det samma gäller för min laptop med cid; PCMCIA-nätverkskortet fungerar direkt men det går bra att som root köra ifup eth0. Du kan även fixa till problemet i filen /etc/init.d/networking så görs det automatiskt vid start. Hej! Normalt borde det ju fungera med ifup, men det gör inte det. När jag försöker få liv i kortet (som root) med ifup får jag upp följande: ~# ifup eth0 Internet Software Consortium DHCP Client 2.0pl5 Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium. All rights reserved. Please contribute if you find this software useful. For info, please visit http://www.isc.org/dhcp-contrib.html eth0: ERROR while getting interface flags: No such device Bind socket to interface: No such device exiting. Failed to bring up eth0. Var sjutton kan felet ligga?? MVH Pär Du har antagligen ingen drivrutin för nätverkskortet laddat. Du kan kontrollera det genom att se vilka nätverksanslutningar som är tillgängliga: $ cat /proc/net/dev Inter-| Receive|... face |bytespackets errs drop fifo frame compressed multicast|... lo: 357 4000 0 0 0 ... eth0: 2972455 14162000 0 0 0 ... eth1: 0 0000 0 0 0 ... $ Som man ser har jag tre nätversksanslutningar tillgängliga: lo, eth0 och eth1. Du har förmodligen bara lo i din lista. Stegen för att få igång en nätverksanslutning är att: 1, ladda drivrutin - kan man göra . manuellt: modprobe modulnamn . automatiskt: med pcmcia-cs eller hotplug 2, sätt ipnummer mm. . manuellt: ifconfig ... alt. dhclient eth0 . automatiskt: ifup alt. i konfigfiler till pcmcia-cs/hotplug Vet du vilket kort du har och vilken drivrutin i linux som passar föreslår jag att du gör: # modprobe modulnamn # ifconfig eth0 192.168.1.22 # ifconfig bara för att se om du kan få igång det. Om du är på ett nät där man måste använda dhcp, kan du fortsätta med: # dhclient eth0 vänta # host ftp.sunet.se och se om du får svar. Hälsningar, /Karl --- Karl HammarAspö Data [EMAIL PROTECTED] Lilla Aspö 2340 Nätverk S-742 94 Östhammar0173 140 57Datorer/Utrustning Sverige 070 511 97 84Linux/Unix konsulting --- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA problem
Johan Mattsson wrote: Hej. Pär Lindén wrote: På denna har jag installerat Kanotix, 100 procent kompatibel med Debian Sid men med en customkernel och lite andra fix. Fram till nu har jag anslutit till internet via ett externt nätverkskort, som jag anslutit till USB porten. Detta har fungerat utan problem. Nu har jag skaffat ett ethernetkort (PCcard/Cardbus tror jag) till PCMCIA slotten. Detta fungerar dock inte alls. Det samma gäller för min laptop med cid; PCMCIA-nätverkskortet fungerar direkt men det går bra att som root köra ifup eth0. Du kan även fixa till problemet i filen /etc/init.d/networking så görs det automatiskt vid start. Hej! Normalt borde det ju fungera med ifup, men det gör inte det. När jag försöker få liv i kortet (som root) med ifup får jag upp följande: ~# ifup eth0 Internet Software Consortium DHCP Client 2.0pl5 Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium. All rights reserved. Please contribute if you find this software useful. For info, please visit http://www.isc.org/dhcp-contrib.html eth0: ERROR while getting interface flags: No such device Bind socket to interface: No such device exiting. Failed to bring up eth0. Var sjutton kan felet ligga?? MVH Pär Du har antagligen ingen drivrutin för nätverkskortet laddat. Du kan kontrollera det genom att se vilka nätverksanslutningar som är tillgängliga: $ cat /proc/net/dev Inter-| Receive|... face |bytespackets errs drop fifo frame compressed multicast|... lo: 357 4000 0 0 0 ... eth0: 2972455 14162000 0 0 0 ... eth1: 0 0000 0 0 0 ... $ Som man ser har jag tre nätversksanslutningar tillgängliga: lo, eth0 och eth1. Du har förmodligen bara lo i din lista. Stegen för att få igång en nätverksanslutning är att: 1, ladda drivrutin - kan man göra . manuellt: modprobe modulnamn . automatiskt: med pcmcia-cs eller hotplug 2, sätt ipnummer mm. . manuellt: ifconfig ... alt. dhclient eth0 . automatiskt: ifup alt. i konfigfiler till pcmcia-cs/hotplug Vet du vilket kort du har och vilken drivrutin i linux som passar föreslår jag att du gör: # modprobe modulnamn # ifconfig eth0 192.168.1.22 # ifconfig bara för att se om du kan få igång det. Om du är på ett nät där man måste använda dhcp, kan du fortsätta med: # dhclient eth0 vänta # host ftp.sunet.se och se om du får svar. Hälsningar, /Karl --- Karl HammarAspö Data [EMAIL PROTECTED] Lilla Aspö 2340 Nätverk S-742 94 Östhammar0173 140 57Datorer/Utrustning Sverige 070 511 97 84Linux/Unix konsulting ---
Re: PCMCIA problem
Johan Mattsson wrote: Hej. Pär Lindén wrote: På denna har jag installerat Kanotix, 100 procent kompatibel med Debian Sid men med en customkernel och lite andra fix. Fram till nu har jag anslutit till internet via ett externt nätverkskort, som jag anslutit till USB porten. Detta har fungerat utan problem. Nu har jag skaffat ett ethernetkort (PCcard/Cardbus tror jag) till PCMCIA slotten. Detta fungerar dock inte alls. Det samma gäller för min laptop med cid; PCMCIA-nätverkskortet fungerar direkt men det går bra att som root köra ifup eth0. Du kan även fixa till problemet i filen /etc/init.d/networking så görs det automatiskt vid start. Hej! Normalt borde det ju fungera med ifup, men det gör inte det. När jag försöker få liv i kortet (som root) med ifup får jag upp följande: ~# ifup eth0 Internet Software Consortium DHCP Client 2.0pl5 Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium. All rights reserved. Please contribute if you find this software useful. For info, please visit http://www.isc.org/dhcp-contrib.html eth0: ERROR while getting interface flags: No such device Bind socket to interface: No such device exiting. Failed to bring up eth0. Var sjutton kan felet ligga?? MVH Pär -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA problem
Hej. Pär Lindén wrote: På denna har jag installerat Kanotix, 100 procent kompatibel med Debian Sid men med en customkernel och lite andra fix. Fram till nu har jag anslutit till internet via ett externt nätverkskort, som jag anslutit till USB porten. Detta har fungerat utan problem. Nu har jag skaffat ett ethernetkort (PCcard/Cardbus tror jag) till PCMCIA slotten. Detta fungerar dock inte alls. Det samma gäller för min laptop med cid; PCMCIA-nätverkskortet fungerar direkt men det går bra att som root köra ifup eth0. Du kan även fixa till problemet i filen /etc/init.d/networking så görs det automatiskt vid start. Bästa hälsningar Johan.
Re: PCMCIA configuration in sarge
Am 2006-03-14 23:09:07, schrieb Doofus: orinoco_cs orinoco hermes and then after boot is finished, ds.o is loaded but not my driver modules. I'm guessing this is because the init scripts are trying to load the contents of /etc/modules before ds.o is loaded, which won't work? Please correct me if I'm wrong. You need to add those modules to your pcmcia-config. There is a section where you can telle the script what to load. Greetings Michelle Konzack Systemadministrator Tamay Dogan Network Debian GNU/Linux Consultant -- Linux-User #280138 with the Linux Counter, http://counter.li.org/ # Debian GNU/Linux Consultant # Michelle Konzack Apt. 917 ICQ #328449886 50, rue de Soultz MSM LinuxMichi 0033/3/8845235667100 Strasbourg/France IRC #Debian (irc.icq.com) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA configuration in sarge
Doofus wrote: Andrei Popescu wrote: On Tue, 14 Mar 2006 23:09:07 + Doofus [EMAIL PROTECTED] wrote: After my laptop is booted, I can get driver modules: orinoco_cs orinoco hermes loaded just by typing `modprobe orinoco_cs` Now I'm trying, unsuccessfully, to get them loaded automatically at boot time. If I put any or all of the modules in /etc/modules, I get an error message in the boot process very close to: ds: no socket driver! and then after boot is finished, ds.o is loaded but not my driver modules. I'm guessing this is because the init scripts are trying to load the contents of /etc/modules before ds.o is loaded, which won't work? Please correct me if I'm wrong. Can someone explain what's happening here, and what the solution is get everything loaded in the right order? I haven't found an answer in /usr/share/doc/pcmcia_cs. kernel 2.4.27 dell inspiron 8200 Many thanks for any assistance. Just a wild thought ... did you try adding ds to /etc/modules? (before the others of course). That is if ds.o is also a module (AFAIK modules now have the extension .ko) Andrei I should have thought of trying that in view of my description above. It still doesn't work though. The exact error message is: ds: No socket drivers loaded! but as I said the ds module does get loaded a bit later - probably by the pcmcia scripts. I'm using the kernel pcmcia support and the yenta socket driver, and Dave Hinds pcmcia_cs package. There's obviously something not in place that's preventing the ds.o module from being loaded early in the boot - don't know what it is though. I guess I could just compile some of this stuff into the kernel but I don't really want to do that. The problem, I believe, is not with ds, but with something that ds depends on (one of the socket networking drivers). Most (all?) of the networking stuff on Debian systems seems to be started in the /etc/rcS.d directory by the S40networking script. You might want to consider adding your own rc script, linked to a file name in /etc/rcS.d that would make it run after the S40networking script, that does the modprobe of orinoco_cs. If I understand the rc setup, this should provide the sockets needed by ds, which would then load, followed by your orinoco related drivers. Bob -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA configuration in sarge
Not sure of any of this, but; Have you loaded yenta_socket ? On a vanilla kernel Sarge 3.1r1 (kernel 2.6.8-2-i386), it's lisyed in 'lsmod'. Also note my (Debian's) default runlevel is 2, so perhaps review ; $ cat /etc/rc2.d/S20pcmcia I have this is lsmod; ds 17796 0 yenta_socket 19200 0 pcmcia_core63028 2 ds,yenta_socket See; http://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=123713 follow the older bug if necessary (123457 ?) AFAIK, as mentioned, 2.6 kernel (at some point in version) uses .ko , not .o Do a $ locate yenta /lib/modules/2.6.8-2-386/kernel/drivers/pcmcia/yenta_socket.ko perhaps also do; $ locate pcmcia to find related documentation (locally) __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA configuration in sarge
On Tue, 14 Mar 2006 23:09:07 + Doofus [EMAIL PROTECTED] wrote: After my laptop is booted, I can get driver modules: orinoco_cs orinoco hermes loaded just by typing `modprobe orinoco_cs` Now I'm trying, unsuccessfully, to get them loaded automatically at boot time. If I put any or all of the modules in /etc/modules, I get an error message in the boot process very close to: ds: no socket driver! and then after boot is finished, ds.o is loaded but not my driver modules. I'm guessing this is because the init scripts are trying to load the contents of /etc/modules before ds.o is loaded, which won't work? Please correct me if I'm wrong. Can someone explain what's happening here, and what the solution is get everything loaded in the right order? I haven't found an answer in /usr/share/doc/pcmcia_cs. kernel 2.4.27 dell inspiron 8200 Many thanks for any assistance. Just a wild thought ... did you try adding ds to /etc/modules? (before the others of course). That is if ds.o is also a module (AFAIK modules now have the extension .ko) Andrei -- If you can't explain it simply, you don't understand it well enough. (Albert Einstein) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA configuration in sarge
Andrei Popescu wrote: On Tue, 14 Mar 2006 23:09:07 + Doofus [EMAIL PROTECTED] wrote: After my laptop is booted, I can get driver modules: orinoco_cs orinoco hermes loaded just by typing `modprobe orinoco_cs` Now I'm trying, unsuccessfully, to get them loaded automatically at boot time. If I put any or all of the modules in /etc/modules, I get an error message in the boot process very close to: ds: no socket driver! and then after boot is finished, ds.o is loaded but not my driver modules. I'm guessing this is because the init scripts are trying to load the contents of /etc/modules before ds.o is loaded, which won't work? Please correct me if I'm wrong. Can someone explain what's happening here, and what the solution is get everything loaded in the right order? I haven't found an answer in /usr/share/doc/pcmcia_cs. kernel 2.4.27 dell inspiron 8200 Many thanks for any assistance. Just a wild thought ... did you try adding ds to /etc/modules? (before the others of course). That is if ds.o is also a module (AFAIK modules now have the extension .ko) Andrei I should have thought of trying that in view of my description above. It still doesn't work though. The exact error message is: ds: No socket drivers loaded! but as I said the ds module does get loaded a bit later - probably by the pcmcia scripts. I'm using the kernel pcmcia support and the yenta socket driver, and Dave Hinds pcmcia_cs package. There's obviously something not in place that's preventing the ds.o module from being loaded early in the boot - don't know what it is though. I guess I could just compile some of this stuff into the kernel but I don't really want to do that. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA on a IBM Thinkpad
On Wed, 1 Feb 2006 19:30:27 -0500 Leonid Grinberg [EMAIL PROTECTED] wrote: Hello, I recently bought an IBM Thinkpad. It has 2 PCMCIA slots and comes with a PCMCIA Lan Card (3COM Megahertz 10/100 LAN CardBUS Model 3CXFE575CT). The computer came with Windows 2000, and the card worked fine, so I know the card is not faulty. As I tried to install Debian Testing, I installed the base system, but I cannot get networking to work. ifconfig returns only the loopback interface, and /etc/network/interfaces only has the loopback interface. I added one for eth0, but it still does not work. Someone on Usenet (http://groups.google.com/group/linux.debian.user/browse_thread/thread/860e77cb06d2e51d/a43656903237dbda%23a43656903237dbda?sa=Xoi=groupsrstart=1num=2) seems to have a very similar problem. He got a reply saying that he needs to change some configuration values. I have never configured the kernel before, but from what I understand, I need to have the sources for it. Unfortunately, debian-installer does not come with the sources. What should I do? Thank you in advance for your help. -- Leonid Grinberg [EMAIL PROTECTED] Actually that response says: It's supported by the 3c59x driver. You *do* have that one, don't you? You can check with 'lsmod'. Then it says: [...] If that's not enabled in your kernel, it needs to be. You need CONFIG_HOTPLUG, CONFIG_PCMCIA, but not CONFIG_HOTPLUG_PCI. That means should check the kernel config. The stock 2.6.8 kernel from Sarge seems to be ok. Later: Install hotplug, read README.Debian, configure /etc/network/interfaces appropriately, you're done. That is /usr/share/doc/hotplug/README.Debian (I presume) Andrei -- If you can't explain it simply, you don't understand it well enough. (Albert Einstein) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: pcmcia-cs kernel version = 2.6.13 and udev
Bonjour, On Monday 30 January 2006 18:33, Georges Roux wrote: C'est donc voulu, alors si pcmcia-cs est deprecated pour mon noyo ou pour udev que faut il utiliser? Utiliser pcmciautils. A+, JD. -- Pensez à lire la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Pensez à rajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA configuration
On 15 Jan 2006, Tom Allison wrote: Anthony Campbell wrote: [snip] This may not be relevant, but I've had problems with my Cisco Aironet 340 which sound similar. I eventually tracked them to hotplug. If you have upgraded this recently you could try going back to the version in Stable. Anthony Similarly, I reset my apt_preferences from unstable to testing. purged everything related to pcmcia and wireless. reinstalled pcmcia-cs and wireless tools. Now it works. kernel 2.6.15. I'm thinking there might be a big fat hairy bug when whatever is in unstable gets into testing Unfortunately my installation, until today, was rather spread out between testing and unstable. That's been remedied as I can no longer afford this to be an unstable branch. I need it to work. I would downgrade to stable if I could, but I have a few other packages that I need in testing, so this is as far as I dare go. I'm following unstable myself (and it doesn't seem to be noticeably more hazardous than following testing, which I used to do) and mostly things don't break too badly. However the hotplug gotcha was very difficult to spot and to disentangle from wireless-tools etc. I submitted a bug report on hotplug, naturally, but nothing has come back beyond the formal acknowledgement. Anthony -- Anthony Campbell - [EMAIL PROTECTED] Microsoft-free zone - Using Linux Gnu-Debian http://www.acampbell.org.uk (blog, book reviews, on-line books and sceptical articles) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA configuration
I'm following unstable myself (and it doesn't seem to be noticeably more hazardous than following testing, which I used to do) and mostly things don't break too badly. However the hotplug gotcha was very difficult to spot and to disentangle from wireless-tools etc. I submitted a bug report on hotplug, naturally, but nothing has come back beyond the formal acknowledgement. It takes time for the bug reports to get processed. Some packages have to wait for a confirmation from other users to keep from chasing every It won't run bug report. Many times I was convinced I had found a real bug only to realize that I needed to RTFM better. I still submit a bug, but a minor one as a suggested improvement. This one I think was real only because it was working for 1 year and then broke in an upgrade. Unfortunately I've scrambled my installation enough to be uncertain what exactly the cause might be. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA configuration
On Sunday, 15 January 2006 at 10:22:59 -0500, Tom Allison wrote: Grr... I've having problems with my Orinoco gold pcmcia card that used to work. I'll assume some kind of upgrade problem maybe but whatever it is, I'm no longer able to sort it out myself. From the syslog, it appears that the encryption is no longer valid. This is confusing because I haven't changed anything (that I know of) for well over a year. I've checked the access point and it's working and such... help? Between /etc/pcmcia/network.opts /etc/pcmcia/wireless.opts /etc/network/ifconfig I'm not getting anything to work. the card doesn't appear to load at all or only partially. I have a very similar problem with an Orinoco PCMCIA card. There were a number of suggestions here a couple of weeks ago, and on debian-laptop just afterwards, but no solution yet. One thing I haven't yet tried is getting the latest driver. Does your card connect if you temporarily turn off encryption at the access point? Mine does (by manual 'ifup eth0'). If it does we may have the same complaint... -- richard -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA configuration
On 1/15/2006, Richard Lyons [EMAIL PROTECTED] wrote: On Sunday, 15 January 2006 at 10:22:59 -0500, Tom Allison wrote: Grr... I've having problems with my Orinoco gold pcmcia card that used to work. I'll assume some kind of upgrade problem maybe but whatever it is, I'm no longer able to sort it out myself. From the syslog, it appears that the encryption is no longer valid. This is confusing because I haven't changed anything (that I know of) for well over a year. I've checked the access point and it's working and such... help? Between /etc/pcmcia/network.opts /etc/pcmcia/wireless.opts /etc/network/ifconfig I'm not getting anything to work. the card doesn't appear to load at all or only partially. I have a very similar problem with an Orinoco PCMCIA card. There were a number of suggestions here a couple of weeks ago, and on debian-laptop just afterwards, but no solution yet. One thing I haven't yet tried is getting the latest driver. Does your card connect if you temporarily turn off encryption at the access point? Mine does (by manual 'ifup eth0'). If it does we may have the same complaint... --Jan 15 11:30:03 localhost kernel: hostap_cs: setting Vcc=33 (constant) Jan 15 11:30:03 localhost kernel: hostap_cs: CS_EVENT_CARD_INSERTION Jan 15 11:30:03 localhost kernel: hostap_cs: setting Vcc=50 (from config) Jan 15 11:30:03 localhost kernel: Checking CFTABLE_ENTRY 0x01 (default 0x01) Jan 15 11:30:03 localhost kernel: IO window settings: cfg-io.nwin=1 dflt.io.nwin=1 Jan 15 11:30:03 localhost kernel: io-flags = 0x0046, io.base=0x, len=64 Jan 15 11:30:03 localhost kernel: hostap_cs: Registered netdevice wifi0 Jan 15 11:30:03 localhost kernel: hostap_cs: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f Jan 15 11:30:03 localhost kernel: prism2_hw_init: initialized in 40 ms Jan 15 11:30:03 localhost kernel: wifi0: NIC: id=0x01 v4.2.1 Jan 15 11:30:03 localhost kernel: wifi0: PRI: id=0x15 v4.4.1 Jan 15 11:30:03 localhost kernel: wifi0: STA: id=0x1f v7.28.1 Jan 15 11:30:03 localhost cardmgr[7737]: socket 1: Lucent Technologies WaveLAN/IEEE Adapter Jan 15 11:30:03 localhost kernel: wifi0: CMD=0x0121 = res=0x7f, resp0=0x0004 Jan 15 11:30:03 localhost kernel: wifi0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=127, rid=fc33, len=2) Jan 15 11:30:03 localhost kernel: wifi0: Beacon interval setting to 100 failed Jan 15 11:30:03 localhost kernel: wifi0: CMD=0x0121 = res=0x7f, resp0=0x0004 Jan 15 11:30:03 localhost kernel: wifi0: hfa384x_set_rid: CMDCODE_ACCESS_WRITE failed (res=127, rid=fc10, len=2) I tried that with no luck. I'm beginning to think that I'm in that nasty realm of either the card is NFG or the drivers are buggy. This is one of the best cards I've owned.
Re: PCMCIA configuration
On 15 Jan 2006, Richard Lyons wrote: On Sunday, 15 January 2006 at 10:22:59 -0500, Tom Allison wrote: Grr... I've having problems with my Orinoco gold pcmcia card that used to work. I'll assume some kind of upgrade problem maybe but whatever it is, I'm no longer able to sort it out myself. From the syslog, it appears that the encryption is no longer valid. This is confusing because I haven't changed anything (that I know of) for well over a year. I've checked the access point and it's working and such... help? Between /etc/pcmcia/network.opts /etc/pcmcia/wireless.opts /etc/network/ifconfig I'm not getting anything to work. the card doesn't appear to load at all or only partially. I have a very similar problem with an Orinoco PCMCIA card. There were a number of suggestions here a couple of weeks ago, and on debian-laptop just afterwards, but no solution yet. One thing I haven't yet tried is getting the latest driver. Does your card connect if you temporarily turn off encryption at the access point? Mine does (by manual 'ifup eth0'). If it does we may have the same complaint... -- richard This may not be relevant, but I've had problems with my Cisco Aironet 340 which sound similar. I eventually tracked them to hotplug. If you have upgraded this recently you could try going back to the version in Stable. Anthony -- Anthony Campbell - [EMAIL PROTECTED] Microsoft-free zone - Using Linux Gnu-Debian http://www.acampbell.org.uk (blog, book reviews, on-line books and sceptical articles) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA configuration
On Sun, Jan 15, 2006 at 05:08:41PM +, Anthony Campbell wrote: This may not be relevant, but I've had problems with my Cisco Aironet 340 which sound similar. I eventually tracked them to hotplug. If you have upgraded this recently you could try going back to the version in Stable. Ah, yes, I saw something similar recently with an orinoco_cs card. A configuration on my other notebook somehow lent a hint. It seemed that hotplug incorrectly loaded the yenta_socket module when it started up, so the regular pcmcia startup didn't get a chance to do it correctly. I blacklisted yenta_socket from hotplug to allow it to later be initialized properly by pcmcia scripts. [EMAIL PROTECTED]:~$ cat /etc/hotplug/blacklist.d/pcmcia pcmcia_core yenta_socket And reboot. -- John M Flinchbaugh [EMAIL PROTECTED] signature.asc Description: Digital signature
Re: PCMCIA configuration
On 15 Jan 2006, John M Flinchbaugh wrote: On Sun, Jan 15, 2006 at 05:08:41PM +, Anthony Campbell wrote: This may not be relevant, but I've had problems with my Cisco Aironet 340 which sound similar. I eventually tracked them to hotplug. If you have upgraded this recently you could try going back to the version in Stable. Ah, yes, I saw something similar recently with an orinoco_cs card. A configuration on my other notebook somehow lent a hint. It seemed that hotplug incorrectly loaded the yenta_socket module when it started up, so the regular pcmcia startup didn't get a chance to do it correctly. I blacklisted yenta_socket from hotplug to allow it to later be initialized properly by pcmcia scripts. [EMAIL PROTECTED]:~$ cat /etc/hotplug/blacklist.d/pcmcia pcmcia_core yenta_socket And reboot. -- John M Flinchbaugh [EMAIL PROTECTED] Never looked into the configureation of hotplug before. I don't have anything at all in /etc/hotplug/blacklist.d. At present I've simply put hotplug on hold to keep it at the version in Stable and provided I do this everything works. -- Anthony Campbell - [EMAIL PROTECTED] Microsoft-free zone - Using Linux Gnu-Debian http://www.acampbell.org.uk (blog, book reviews, on-line books and sceptical articles) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA configuration
Anthony Campbell wrote: On 15 Jan 2006, Richard Lyons wrote: On Sunday, 15 January 2006 at 10:22:59 -0500, Tom Allison wrote: Grr... I've having problems with my Orinoco gold pcmcia card that used to work. I'll assume some kind of upgrade problem maybe but whatever it is, I'm no longer able to sort it out myself. From the syslog, it appears that the encryption is no longer valid. This is confusing because I haven't changed anything (that I know of) for well over a year. I've checked the access point and it's working and such... help? Between /etc/pcmcia/network.opts /etc/pcmcia/wireless.opts /etc/network/ifconfig I'm not getting anything to work. the card doesn't appear to load at all or only partially. I have a very similar problem with an Orinoco PCMCIA card. There were a number of suggestions here a couple of weeks ago, and on debian-laptop just afterwards, but no solution yet. One thing I haven't yet tried is getting the latest driver. Does your card connect if you temporarily turn off encryption at the access point? Mine does (by manual 'ifup eth0'). If it does we may have the same complaint... -- richard This may not be relevant, but I've had problems with my Cisco Aironet 340 which sound similar. I eventually tracked them to hotplug. If you have upgraded this recently you could try going back to the version in Stable. Anthony Similarly, I reset my apt_preferences from unstable to testing. purged everything related to pcmcia and wireless. reinstalled pcmcia-cs and wireless tools. Now it works. kernel 2.6.15. I'm thinking there might be a big fat hairy bug when whatever is in unstable gets into testing Unfortunately my installation, until today, was rather spread out between testing and unstable. That's been remedied as I can no longer afford this to be an unstable branch. I need it to work. I would downgrade to stable if I could, but I have a few other packages that I need in testing, so this is as far as I dare go. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA mit Kernel 2.6.14.3
Am Donnerstag, 15. Dezember 2005 14:31 schrieb Torsten Rudolph: Wenn ich nun im Kernel die alte Unterstützung ausschalte und meine Karte einschiebe wird diese zwar erkannt (card inserted in socket 0) aber kein Treiber geladen. Hallo, funktioniert es, wenn Du den Treiber mittels modconf lädst? Beim nächsten Systemstart wird er dann automatisch geladen und sollte beim Einstecken der Karte aktiv werden. Gruß, Matthias -- 52°31'1N 13°28'48E ICQ: 126956328 Don't drink as root!
Re: PCMCIA USB cards under linux?
Thanks for the info. I was indeed not looking for a card which expressly states that it works with linux, but rather just one which I could get work. Thanks for your answer and your link. It indeed suggests that my search might not be in vain. :-) I will contact my local dealer and talk about it :-) Maybe I can load my iPod in future faster :-)) Cheers, - Martin On 12/2/05, Justin Guerin [EMAIL PROTECTED] wrote: Hi Martin, This thread would seem to indicate your search will not be in vain. http://www.linuxquestions.org/questions/showthread.php?s=postid=1756217#post1756217 However, note that if you're looking for a manufacturer to expressly state they are Linux compatible, you're a few years too early. Still, with the return policy clarified beforehand, you should be able to get something that will work. Also, check pricewatch.com for a list of cards. There's quite a lot to choose from, and though I didn't look at all of the cards, of the ones I did, none of them said Linux compatible. It doesn't mean they aren't, just that it isn't guaranteed. Good luck, Justin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA USB cards under linux (success!)
The USB 2.0 via PCMCIA card continues. My search was not in vain. :-) Just for the record: I bought now a 2 Port USB 2.0 CardBus card from Transcend. And the ehci/ohci driver compiled into the kernel recognized the card imediately (running a custom compiled 2.6.14.3 kernel). There seems to be no problems at all. :-) Thanks Justin for your encouraging message! :-) - Martin
Re: PCMCIA USB cards under linux?
On Thursday 01 December 2005 13:29, Martin Fluch wrote: Hi! From my search sofar the result doesn't look promissing. But is there any PCMCIA USB 2.0 card which works under Linux. My IBM T30 has only an USB 1.1 port and it would be nice to a USB 2.0 adapter to transfer faster data between my T30 and my iPod. Can anybody maybe proove my observation wrong? Maybe? ;-) With best wishes, - Martin Hi Martin, This thread would seem to indicate your search will not be in vain. http://www.linuxquestions.org/questions/showthread.php?s=postid=1756217#post1756217 However, note that if you're looking for a manufacturer to expressly state they are Linux compatible, you're a few years too early. Still, with the return policy clarified beforehand, you should be able to get something that will work. Also, check pricewatch.com for a list of cards. There's quite a lot to choose from, and though I didn't look at all of the cards, of the ones I did, none of them said Linux compatible. It doesn't mean they aren't, just that it isn't guaranteed. Good luck, Justin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: pcmcia + acpi + suspend2 seems impossible...
On 11/15/05, Eric van der Paardt [EMAIL PROTECTED] wrote: -Original Message- From: Martin Hauser [mailto:[EMAIL PROTECTED] Sent: Tuesday, November 15, 2005 2:20 AM To: debian-laptop@lists.debian.org Subject: Re: pcmcia + acpi + suspend2 seems impossible... -snip- So far I haven't been able to get all three of these together in one kernel. Suspend2 doesn't appear to be a problem -- though after I apply the suspend2 patch I generally have to uncheck a bunch of extraneous module options in menuconfig. Suspend2 + pcmcia almost works for me; currently my main problem is that, *SOMETIMES*, after suspension, I get this: kernel: unregister_netdevice: waiting for eth0 to become free. Usage count = 5 after which eth0 (a pcmcia NIC) is dead till reboot, and in fact even rebooting is blocked by this persistent message, which fills up my kernel log at intervals of 1 to 15 seconds. Hmm, interesting. Probably you should get your 'hibernate' script to forcefully unload the pcmcia modules and the cardbus modules + probably hack it so it does and /etc/init.d/pcmcia stop before it goes to sleep. That way it'd probably be working back once you're resumed. You then just push back in the modules, restart pcmcia and there you go. If you need detailed instructions on how to do that, let me know. I have the same laptop running Debian and can confirm that you have to write some shell scripts to unload the PCMCIA drivers for suspend and resume to work. In addition to the PCMCIA drivers I also had to remove all the audio drivers for sound to work after resume. For me the magic combination was down the network, unload the WLAN, unload the audio, unload the PCMCIA, and then suspend. On resume it was; load audio, load PCMCIA, then load WLAN, and then fire up DHCP... Net result was a machine that suspended, but took nearly as long as shutting it down and restarting it. I don't recall using any kernel patches to do any of this, but as this is my sons laptop it has been a long while... so I could very well be wrong... as I do remember being leery to mess with ACPI as it's horribly broke on this machine and has been known to render them useless. E hmm. Don't have the laptop on me right now, but I know I bring down the PCMCIA interface before hibernation using the hibernate script. I think the unregister_netdevice issue is a problem with the latest kernel, as I haven't really seen it with earlier (2.6.12) kernels. I'm wondering whether either one of you could send me a .config for a working kernel -- Eric, sounds like you don't necessarily have access to yours all the time -- but It would be nice to see if soneone else's config also broke on my system, or whether the problem is in my configuration. A bummer about ACPI. I actually find that, with the exception of rendering cardbus *unusable* on my machine, acpi seems to work pretty well for me, at least with the most recent kernel. I was reminded of why I like it today during lecture, when I went to move my laptop off a piece of paper it was sitting on, accidentally hit the power switch, and powered off accidentally! It would be nice if the power button could be mapped to something else, like e.g. a dialog do you really want to turn off your computer? Anyway thanks, I will certainly add some additional protection to the suspend script see if that helps. Matt
Re: pcmcia/cardbus issue after 2.6.14 kernel upgrade
On 10:06 Mon 07 Nov , Matt Price wrote: hi folks, in an effort to get acpi workingo n my laptop (THinkpad 600e) I've upgraded to 2.6.14 kernel. Seemswo work fine! Except I'm having trouble with my wireless card (D-Link DWL-650+). The third-party driver compiled andi nstalled fine, but when I insert the card I get the message: cs: pcmcia_socket1: cardbus cards are not supported. Now, I think that I've configured the kernel to support cardbus -- here's the relevant bits of my config file, as installed by the .deb I made: # Linux kernel version: 2.6.14-suspend2-upstream-p2 # Sun Nov 6 21:34:11 2005 # snip # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # snip # PCCARD (PCMCIA/CardBus) support # CONFIG_PCCARD=m # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=m CONFIG_PCMCIA_LOAD_CIS=y CONFIG_PCMCIA_IOCTL=y CONFIG_CARDBUS=y # # PC-card bridges # CONFIG_YENTA=m CONFIG_PD6729=m CONFIG_I82092=m CONFIG_I82365=m CONFIG_TCIC=m CONFIG_PCMCIA_PROBE=y CONFIG_PCCARD_NONSTATIC=m # # # Wireless 802.11b Pcmcia/Cardbus cards support # CONFIG_PCMCIA_HERMES=m # CONFIG_PCMCIA_SPECTRUM is not set CONFIG_AIRO_CS=m CONFIG_PCMCIA_ATMEL=m CONFIG_PCMCIA_WL3501=m # # PCMCIA network device support # CONFIG_NET_PCMCIA=y CONFIG_PCMCIA_3C589=m CONFIG_PCMCIA_3C574=m CONFIG_PCMCIA_FMVJ18X=m CONFIG_PCMCIA_PCNET=m CONFIG_PCMCIA_NMCLAN=m CONFIG_PCMCIA_SMC91C92=m CONFIG_PCMCIA_XIRC2PS=m CONFIG_PCMCIA_AXNET=m CONFIG_ARCNET_COM20020_CS=m CONFIG_PCMCIA_IBMTR=m just about every possible pcmcia option seems to be enabled. ANy hints as to what I might have done wrong here? Or what the next debugging step would be? thanks, I think you have all the necessary CONFIG's, but is the cardmgr daemon running (/etc/init.d/pcmcia)? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: pcmcia/cardbus issue after 2.6.14 kernel upgrade
On 11/7/05, mikepolniak [EMAIL PROTECTED] wrote: On 10:06 Mon 07 Nov , Matt Price wrote: hi folks, just about every possible pcmcia option seems to be enabled. ANy hints as to what I might have done wrong here? Or what the next debugging step would be? thanks, I think you have all the necessary CONFIG's, but is the cardmgr daemon running (/etc/init.d/pcmcia)? yeah, it's up and running. My very old 10 mbps ethernet card works fine (well, some trouble after resume from suspend, but that's another issue I think); the wireless card, and a newer NIC (IBM10/100etherjet) both produce that cardbus-related error, which I guess comes from yenta (googe locates some patches submitted to the yenta project a year or so ago). so possibly the cardbus support is broken in my kernel? seems weird... matt -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: pcmcia/cardbus issue after 2.6.14 kernel upgrade
On Mon, Nov 07, 2005 at 11:52:02AM -0500, Matt Price wrote: On 11/7/05, mikepolniak [EMAIL PROTECTED] wrote: On 10:06 Mon 07 Nov , Matt Price wrote: hi folks, just about every possible pcmcia option seems to be enabled. ANy hints as to what I might have done wrong here? Or what the next debugging step would be? thanks, I think you have all the necessary CONFIG's, but is the cardmgr daemon running (/etc/init.d/pcmcia)? yeah, it's up and running. My very old 10 mbps ethernet card works fine (well, some trouble after resume from suspend, but that's another issue I think); the wireless card, and a newer NIC (IBM10/100etherjet) both produce that cardbus-related error, which I guess comes from yenta (googe locates some patches submitted to the yenta project a year or so ago). so possibly the cardbus support is broken in my kernel? seems weird... I've a similar problem here. I just upgraded my laptop from the default Debian/sarge 2.6.8 Kernel up to 2.6.14-git(8|9|10) (hey now at leasts swsusp works again). The pcmcia init script reports that there is no pcmcia driver and it's right there is no pcmcia entry in /proc/drivers. pcmcia_core, pcmcia and yenta_socket modules are loaded of course and don't produce any debug output (I added pccard debug to the kernel). Strange problem. Oh and if you experience problems with acpi batterie stats disable preempt for the moment as a workaround. Sven -- If God passed a mic to me to speak I'd say stay in bed, world Sleep in peace [The Cardigans - 03:45: No sleep] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA Wireless Card startup problems under Debian Sid
James Caldow [EMAIL PROTECTED] writes: Using a Sarge net-install disc I set about the install process again Of course it is too late now, but: except for downgrades or totally hosed systems, there is no need to reinstall. Upgrading to sid or etch is as easy as adding the appropriate lines to your sources.list and 'aptitude dist-upgrade'. If only it were that simple. I had been trying to avoid my original email becoming too long, but prior to installing in the manner described above I had tried to apt-get dist-upgrade two seperate machines from Sarge to Sid. The right way is to upgrade first from sarge to etch and then from etch to sid. sarge - etch - sid. This is the recommended way. You can't skip etch, if you do that - no wonder you encounter problems. In both cases it choked on things like udev, dpkg, etc. I did it several times already. Last time was yesterday and it went flawlessly. I found plenty of info on workarounds for these issues by googling but they were all incredibly brute force workarounds to my way of thinking and I simply wanted to try installing the system cleanly using Sid sources from the start. That is strange. These upgrades should be pretty straightforward. Another case is for downgrading that is not supported, but can be performed using some brutal force. As I said, I have installed various linux distributions over the years, and feel comfortable enough with the whole process that a clean install doesn't phase me too much. Easy upgrade is one of the strengths of debian. It doesn't make sense not to use it. -- We are all special cases. - Albert Camus -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA Wireless Card startup problems under Debian Sid
James Caldow: I was happy like this for a while and was loving everything about Debian. Then I began to get adventurous. I wanted to see what I was missing with Debian Sid. I liked the idea of more up to date software and a more current development environment to play with. If you plan to stay with sid, please install apt-listbugs and apt-listchanges. They can display bugreports, changelogs and news items when installing or upgrading packages. lecture mode=curtain Please note that using sid sometimes requires you to work around minor or major problems yourself. By using sid you implicitly agree not to whine about broken software and to report problems to the bts (bugs.debian.org). That also means that you are expected to fix a lot of things yourself, at least on your own system. If you have been reading this list for some time, you might have noticed some hostility towards (obvious) newbies using sid when they are seeking help for trivial problems. That said, nobody expects you to know everything, but you should know some basic Debian documentation (See http://debian.org/doc for the FAQ and Reference) and you should follow news and announcements because some of them directly affect sid. The mailing lists debian-announce, debian-devel-announce and debian-news might be of interest. Even if you don't understand everything (esp. in d-d-a), you get a good impression of how the project works and you will be warned in advance when sid is undergoing significant changes. /lecture Using a Sarge net-install disc I set about the install process again Of course it is too late now, but: except for downgrades or totally hosed systems, there is no need to reinstall. Upgrading to sid or etch is as easy as adding the appropriate lines to your sources.list and 'aptitude dist-upgrade'. and using the expert options I selected the unstable sources. After flying through all of the initial setup tasksel choked on the desktop environment task. It would complain incessantly about unmet dependencies with the Openoffice.org-kde package. That may be related to the current transition to OpenOffice.org 2.0 in sid. Many of the older extra packages for OOo aren't necessary anymore, but probably the tasks (which were designed for sarge) haven't been updated. The problem started after a reboot. When the laptop rebooted the Wireless card powered on but wouldn't connect. Once logged in I had to manually do ifup eth1 as root to get connected. Not a huge deal, but annoying enough if you have to do it after every reboot! If all you need is to ifup the device, you are probably just missing an 'auto ethX' line in your /etc/network/interfaces. man 5 interfaces. J. -- People talking a foreign language are romantic and mysterious. [Agree] [Disagree] http://www.slowlydownward.com/NODATA/data_enter2.html signature.asc Description: Digital signature
Re: PCMCIA Wireless Card startup problems under Debian Sid
Jochen Schulz wrote: James Caldow: I was happy like this for a while and was loving everything about Debian. Then I began to get adventurous. I wanted to see what I was missing with Debian Sid. I liked the idea of more up to date software and a more current development environment to play with. If you plan to stay with sid, please install apt-listbugs and apt-listchanges. They can display bugreports, changelogs and news items when installing or upgrading packages. lecture mode=curtain Please note that using sid sometimes requires you to work around minor or major problems yourself. By using sid you implicitly agree not to whine about broken software and to report problems to the bts (bugs.debian.org). Whilst I appreciate that you have specified that you are in lecture mode I would also point out that at no point in my email have I whined about the software being broken. I encountered a problem that I could not resolve by myself or by searching, and instead of whining about it I came here to ask for help. That also means that you are expected to fix a lot of things yourself, at least on your own system. If you have been reading this list for some time, you might have noticed some hostility towards (obvious) newbies using sid when they are seeking help for trivial problems. As I said in my email I am not exactly a newbie, nor do I claim to know everything. I am simply looking for a solution and had hoped that someone could help. I have used various open-source mailing lists in the past and continue to do so. I regularly use the mailing lists for Opie, Familiar, and GPE (Linux on Ipaqs) which can hardly be described as pedestrian or straightforward. At no time during my membership there have I been told that a problem was trivial, or that I shouldn't be asking a question in the first place. That said, nobody expects you to know everything, but you should know some basic Debian documentation (See http://debian.org/doc for the FAQ and Reference) and you should follow news and announcements because some of them directly affect sid. The mailing lists debian-announce, debian-devel-announce and debian-news might be of interest. Even if you don't understand everything (esp. in d-d-a), you get a good impression of how the project works and you will be warned in advance when sid is undergoing significant changes. /lecture Thank you for the advice. In fact I did read through all the documentation available at Debian.org prior to even installing Sarge. That was what convinced me to give it a go. I liked what Debian stood for and what it had to offer. I will also give the lists you mention a look. Using a Sarge net-install disc I set about the install process again Of course it is too late now, but: except for downgrades or totally hosed systems, there is no need to reinstall. Upgrading to sid or etch is as easy as adding the appropriate lines to your sources.list and 'aptitude dist-upgrade'. If only it were that simple. I had been trying to avoid my original email becoming too long, but prior to installing in the manner described above I had tried to apt-get dist-upgrade two seperate machines from Sarge to Sid. In both cases it choked on things like udev, dpkg, etc. I found plenty of info on workarounds for these issues by googling but they were all incredibly brute force workarounds to my way of thinking and I simply wanted to try installing the system cleanly using Sid sources from the start. As I said, I have installed various linux distributions over the years, and feel comfortable enough with the whole process that a clean install doesn't phase me too much. I wish that the apt-get dist-upgrade had worked as it is supposed to, but I wasn't too surprised when it didn't as we are talking about a fairly major change going from Sarge to Sid. and using the expert options I selected the unstable sources. After flying through all of the initial setup tasksel choked on the desktop environment task. It would complain incessantly about unmet dependencies with the Openoffice.org-kde package. That may be related to the current transition to OpenOffice.org 2.0 in sid. Many of the older extra packages for OOo aren't necessary anymore, but probably the tasks (which were designed for sarge) haven't been updated. Again, that's pretty much what I expected. Going down the Sid route I wasn't expecting to be held by the hand and allowed to use things like tasksel without a hitch. The problem started after a reboot. When the laptop rebooted the Wireless card powered on but wouldn't connect. Once logged in I had to manually do ifup eth1 as root to get connected. Not a huge deal, but annoying enough if you have to do it after every reboot! If all you need is to ifup the device, you are probably just missing an 'auto ethX' line in your /etc/network/interfaces. man 5 interfaces. And now the crux of the question. When I get home I will try what you suggest and I
Re: PCMCIA Wireless Card startup problems under Debian Sid
Hi James! A few words in advance: I am very sorry that you read my previous mail as a collection of insults. That was not my intention. Actually I tried to make fun of myself with the lecture tags. Please bear with me, probably I just don't manage to communicate subtle humour in any other language than my mother tongue (some might say I fail doing that in my mother tongue just as well). I didn't mean to imply that you are whining or unable to search for help yourself. My intention was to give you some advice which should *prevent* you from being flamed, but obviously you didn't need that in the first place. Sorry again. James Caldow: Jochen Schulz: Of course it is too late now, but: except for downgrades or totally hosed systems, there is no need to reinstall. Upgrading to sid or etch is as easy as adding the appropriate lines to your sources.list and 'aptitude dist-upgrade'. If only it were that simple. I had been trying to avoid my original email becoming too long, but prior to installing in the manner described above I had tried to apt-get dist-upgrade two seperate machines from Sarge to Sid. In both cases it choked on things like udev, dpkg, etc. Good to know! It's been some time that I did that and there were quite some drastic changes after sarge's release. That may be related to the current transition to OpenOffice.org 2.0 in sid. Many of the older extra packages for OOo aren't necessary anymore, but probably the tasks (which were designed for sarge) haven't been updated. Again, that's pretty much what I expected. Going down the Sid route I wasn't expecting to be held by the hand and allowed to use things like tasksel without a hitch. That's a good attitude for sid. :-) If all you need is to ifup the device, you are probably just missing an 'auto ethX' line in your /etc/network/interfaces. man 5 interfaces. And now the crux of the question. When I get home I will try what you suggest and I thank you for taking the time to answer. I just hope that if I run into any more serious problems in the future I can find the solution elsewhere. I dread to think what abuse I will bring upon myself if I decide to ask for help here. Again: I am very sorry if you think I was rude. It was not my intention. And please note that this list is very big and even if you prefer not to read my mails anymore, there is a lot to learn for everybody. I am CC'ing you directly because I don't know whether you already cancelled your subscribtion. There's no need to CC me, I generally read all answers to my mails. J. -- My clothes aren't just fashion. They're a lifestyle. [Agree] [Disagree] http://www.slowlydownward.com/NODATA/data_enter2.html signature.asc Description: Digital signature
Re: PCMCIA Wireless Card startup problems under Debian Sid
On Wed, 02 Nov 2005 13:20:13 + James Caldow [EMAIL PROTECTED] wrote: The problem started after a reboot. When the laptop rebooted the Wireless card powered on but wouldn't connect. Once logged in I had to manually do ifup eth1 as root to get connected. Not a huge deal, but annoying enough if you have to do it after every reboot! There is a thread about this from a couple of days ago. Basically you need to edit two lines in the file /etc/pcmica/network.opts Go to end of the file to the lines which start with : start_fn and stop_fn replace the word return with ifup $1; and ifdown $1; as appropriate and then the networking with the wireless card will be brought up automatically. I went through the same issues with SID and you need to take care to watch what an upgrade will do. Generally it manages to be a useful desktop system with up to date stuff. right now I am trying to sort out why my laptop will no longer powers down automatically at shutdown and the battery monitor no longer works after a recent upgrade. so you are not alone. Ed Lawson -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA Wireless Card startup problems under Debian Sid
Dear Ed Many thanks for your reply. I only signed up for the lists today and have missed the thread that you refer to. Your reply has fixed the problem for me perfectly! After adding the entries you mention the laptop now starts the wireless card perfectly. I am ecstatic :-) As for your issues, I don't want to risk asking the obvious but have you made sure that ACPI and/or APM packages are installed on your system? I haven't experienced any shutdown or battery issues with Debian, but I do know that in some of the older distros ACPI/APM weren't always installed by default and this caused the problems you mention. Just a thought :-) === Jochen, Once again I want to apologise for over-reacting to your email. After re-reading your original email I can see that it wasn't meant as offensively as I first thought. I'm sorry that I thought you were trying to be offensive. I was in the middle of a four hour session of trying to understand why Evolution had decided to stop showing all 194 contacts in my address book!!! Four hours later I was still none the wiser, and my sense of humour was well and truly absent. :-( I will endeavour not to take any future emails quite so personally, unless they are meant that way ;-) Ed Lawson wrote: On Wed, 02 Nov 2005 13:20:13 + James Caldow [EMAIL PROTECTED] wrote: The problem started after a reboot. When the laptop rebooted the Wireless card powered on but wouldn't connect. Once logged in I had to manually do ifup eth1 as root to get connected. Not a huge deal, but annoying enough if you have to do it after every reboot! There is a thread about this from a couple of days ago. Basically you need to edit two lines in the file /etc/pcmica/network.opts Go to end of the file to the lines which start with : start_fn and stop_fn replace the word return with ifup $1; and ifdown $1; as appropriate and then the networking with the wireless card will be brought up automatically. I went through the same issues with SID and you need to take care to watch what an upgrade will do. Generally it manages to be a useful desktop system with up to date stuff. right now I am trying to sort out why my laptop will no longer powers down automatically at shutdown and the battery monitor no longer works after a recent upgrade. so you are not alone. Ed Lawson -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA Wireless Card startup problems under Debian Sid
On Wed, 02 Nov 2005 20:18:08 + James Caldow [EMAIL PROTECTED] wrote: As for your issues, I don't want to risk asking the obvious but have you made sure that ACPI and/or APM packages are installed on your system? Yes, they are installed and I finally got some time to look at things. Adding apm to the /etc/modules file did the trick and now all is fine. thanks in any event. ed lawson -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA Netgear MA401RA not working anymore after Sid dist-upgrade
Hi to all, The problem was that the /etc/pcmcia/wlan-ng.conf file link the MA401RA card to the prism2_cs module, while it should be to the orinico_cs module. The only thing I had to do to make it work is to replace the following lines: card NETGEAR MA401RA 11Mbps 802.11 WLAN Card version NETGEAR MA401RA Wireless PC, Card, ISL37300P, Eval-RevA bind prims2_cs by these ones: card NETGEAR MA401RA 11Mbps 802.11 WLAN Card version NETGEAR MA401RA Wireless PC, Card, ISL37300P, Eval-RevA bind orinoco_cs I'll fill a bvug report against the linux-wlan-ng package to which belongs the /etc/pcmcia/wlan-ng.conf file. . -- Message transmis -- Subject: PCMCIA Netgear MA401RA not working anymore after Sid dist-upgrade Date: 22 Octobre 2005 11:37 From: Marco Laverdière [EMAIL PROTECTED] To: debian-user@lists.debian.org Hi to all, Well I guess the subject if this message says it all: I was running happily my wireless PCMCIA Netgear MA401RA card since 3 years on my Debian Sid/2.6.5/Sony Vaio PCG-K13Q laptop when suddenly, it stopped working just after I did a dist-upgrade yesterday (October 21). Before, when I was inserting the card, I had a deep deep sound and right after, I was up and running with my wireless connection. Now, I get a deep doop sound, and no connection. However, the card seems to still be recognized: doing a cardctl ident at root gives me this: Socket 0: product info: NETGEAR MA401RA Wireless PC, Card, ISL37300P, Eval-RevA manfid: 0x000b, 0x7300 function: 6 (network) Here's some more info: - pcmcia-cs, linux-wlan-ng and wireless-tools packages ared installed; -pcmcia_core, orinoco_cs, orinoco, ds, yenta-socket and modules are loaded at boot, by way of /etc/modules; -in /etc/pcmcia/config file, I can find the following lines: card Netgear MA401RA Wireless Adapter version NETGEAR MA401RA Wireless PC, Card bind orinoco_cs Also, I can get a wireless network connection with the built-in (but less reliable and more slower) Atheros Madwifi card. When I did the dist-upgrade, I observed that the hotplug package had to be removed, because of incompatiblity with udev and hal packages. I tried to reinstalled hotplug, but without results. I'm a little bit clueless right now... Someone can help me solving this. Thanks. -- Marco Laverdière --- -- Marco Laverdière
Re: pcmcia nao sobe por falta de memoria
Gustavo Andreoni Vieira d'Almeida wrote: Galera, Tenho um Notebook acer extensa 367 D E um pentium MMX 200Mhz com 80 mb de Ram, e instalei o debian 3.1 nele, ai com o kernel-2.4.27-2.386 da instalacao a pcmcia 3Com sobe! Quando eu compilei o kernel (ele ficou com 946K) a placa 3com 3c574_cs nao sobe por falta de memoria! No dmesg o erro e o seguinte: cs: warning: no high memory space avaible! cs: unable to map memory! cs: unable to map memory! Provavelmente vc nao habilitou alguma coisa importante relativa ao gerenciamento de memória na hora de compilar o kernel. Não saberia dizer agora o que poderia ser, mas chuto que seja algo nesse caminho... -- Marcos -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA broken in testing?
On 9/28/05, Patrick Wiseman [EMAIL PROTECTED] wrote: PCMCIA is compiled into my 2.4.27 kernel, not modular. I'm going to try recompiling the kernel with PCMCIA as modules, but anyone have any other thoughts about how I might address the problem? Turns out that worked. Curious! Patrick
Re: pcmcia-card (netgear wg511t) causes computer to get extremly slow ...
Hi I can't help you with your problem but you may consider reposting because you seem to have changed the subject line of an existing thread. Some people may, as a result, send it to trash because the thread is of no interest to them. Always, start a new message rather than highjack an existing post ;) Regards Clive On (24/09/05 19:48), Louis Woods wrote: I have installed my pcmcia-card (netgear wg511t) using madwifi. I could make the wireless-connection work, however as soon as I insert the pcmcia card the system get's really slow as if the card is using up all of the memory. Interesting is that I have noticed this behaviour even before I have installed the madwifi driver, which lets me assume that it rather has something to do with the configuration of the pcmcia-cs package. I am using the following kernel: 2.6.8-2-386 In an earlier installation I used a 2.4-Kernel and didn't seem to have this problem. Should pcmcia-cs only be used with 2.4-Kernels? This is what I get when I look into dmesg: PCI: Enabling device :03:00.0 ( - 0002) ACPI: PCI interrupt :03:00.0[A] - GSI 10 (level, low) - IRQ 10 Build date: Sep 24 2005 Debugging version (IEEE80211) ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: H/W encryption support: WEP AES AES_CCM TKIP ath0: mac 5.9 phy 4.3 radio 4.6 ath0: Use hw queue 1 for WME_AC_BE traffic ath0: Use hw queue 0 for WME_AC_BK traffic ath0: Use hw queue 2 for WME_AC_VI traffic ath0: Use hw queue 3 for WME_AC_VO traffic ath0: Use hw queue 8 for CAB traffic ath0: Use hw queue 9 for beacons Debugging version (ATH) ath0: Atheros 5212: mem=0x1080, irq=10 ath0: no IPv6 routers present This is my /etc/network/interfaces file: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp name Ethernet LAN card # The wireless network interface auto ath0 iface ath0 inet dhcp wireless-essid LWSHOME wireless-encrestricted wireless-keyCDKDB800C5F788CCCFF0C4200 name Unknown interface type Any idea where I should be looking for the problem. I am also happy to provide additional information to how my system is setup. Thank you in advance. Louis -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- www.clivemenzies.co.uk ... ...strategies for business -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: pcmcia-card (netgear wg511t) causes computer to get extremly slow ...
Hi I didn't realize I am using a subject line already in use. I'll repost my problem under a different subject. Thank you for the hint. Regards, Louis Clive Menzies wrote: Hi I can't help you with your problem but you may consider reposting because you seem to have changed the subject line of an existing thread. Some people may, as a result, send it to trash because the thread is of no interest to them. Always, start a new message rather than highjack an existing post ;) Regards Clive On (24/09/05 19:48), Louis Woods wrote: I have installed my pcmcia-card (netgear wg511t) using madwifi. I could make the wireless-connection work, however as soon as I insert the pcmcia card the system get's really slow as if the card is using up all of the memory. Interesting is that I have noticed this behaviour even before I have installed the madwifi driver, which lets me assume that it rather has something to do with the configuration of the pcmcia-cs package. I am using the following kernel: 2.6.8-2-386 In an earlier installation I used a 2.4-Kernel and didn't seem to have this problem. Should pcmcia-cs only be used with 2.4-Kernels? This is what I get when I look into dmesg: PCI: Enabling device :03:00.0 ( - 0002) ACPI: PCI interrupt :03:00.0[A] - GSI 10 (level, low) - IRQ 10 Build date: Sep 24 2005 Debugging version (IEEE80211) ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: H/W encryption support: WEP AES AES_CCM TKIP ath0: mac 5.9 phy 4.3 radio 4.6 ath0: Use hw queue 1 for WME_AC_BE traffic ath0: Use hw queue 0 for WME_AC_BK traffic ath0: Use hw queue 2 for WME_AC_VI traffic ath0: Use hw queue 3 for WME_AC_VO traffic ath0: Use hw queue 8 for CAB traffic ath0: Use hw queue 9 for beacons Debugging version (ATH) ath0: Atheros 5212: mem=0x1080, irq=10 ath0: no IPv6 routers present This is my /etc/network/interfaces file: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp name Ethernet LAN card # The wireless network interface auto ath0 iface ath0 inet dhcp wireless-essid LWSHOME wireless-encrestricted wireless-keyCDKDB800C5F788CCCFF0C4200 name Unknown interface type Any idea where I should be looking for the problem. I am also happy to provide additional information to how my system is setup. Thank you in advance. Louis -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: pcmcia-card prblem - new post
Try running `top` when you plug your card in and see what happens to your resources.\nOn 9/24/2005, Louis Woods [EMAIL PROTECTED] wrote: Hi I am reposting my problem (see blow), because I was told I was using a subect line already in use: pcmcia-card (netgear wg511t) causes computer to get extremly slow ... Regards, Louis Hi all, I have installed my pcmcia-card (netgear wg511t) using madwifi. I could make the wireless-connection work, however as soon as I insert the pcmcia card the system get's really slow as if the card is using up all of the memory. Interesting is that I have noticed this behaviour even before I have installed the madwifi driver, which lets me assume that it rather has something to do with the configuration of the pcmcia-cs package. I am using the following kernel: 2.6.8-2-386 In an earlier installation I used a 2.4-Kernel and didn't seem to have this problem. Should pcmcia-cs only be used with 2.4-Kernels? This is what I get when I look into dmesg: PCI: Enabling device :03:00.0 ( - 0002) ACPI: PCI interrupt :03:00.0[A] - GSI 10 (level, low) - IRQ 10 Build date: Sep 24 2005 Debugging version (IEEE80211) ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: H/W encryption support: WEP AES AES_CCM TKIP ath0: mac 5.9 phy 4.3 radio 4.6 ath0: Use hw queue 1 for WME_AC_BE traffic ath0: Use hw queue 0 for WME_AC_BK traffic ath0: Use hw queue 2 for WME_AC_VI traffic ath0: Use hw queue 3 for WME_AC_VO traffic ath0: Use hw queue 8 for CAB traffic ath0: Use hw queue 9 for beacons Debugging version (ATH) ath0: Atheros 5212: mem=0x1080, irq=10 ath0: no IPv6 routers present This is my /etc/network/interfaces file: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp name Ethernet LAN card # The wireless network interface auto ath0 iface ath0 inet dhcp wireless-essid LWSHOME wireless-encrestricted wireless-keyCDKDB800C5F788CCCFF0C4200 name Unknown interface type Any idea where I should be looking for the problem. I am also happy to provide additional information to how my system is setup. Thank you in advance. Louis -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: pcmcia-card prblem - new post
Hi Thank you for the tip. I see now that it is not the memory but the cpu. When I plug in the card I see that the command kacpid is using up 97% of the CPU ... Regards, Louis [EMAIL PROTECTED] wrote: Try running `top` when you plug your card in and see what happens to your resources.\nOn 9/24/2005, Louis Woods [EMAIL PROTECTED] wrote: Hi I am reposting my problem (see blow), because I was told I was using a subect line already in use: pcmcia-card (netgear wg511t) causes computer to get extremly slow ... Regards, Louis Hi all, I have installed my pcmcia-card (netgear wg511t) using madwifi. I could make the wireless-connection work, however as soon as I insert the pcmcia card the system get's really slow as if the card is using up all of the memory. Interesting is that I have noticed this behaviour even before I have installed the madwifi driver, which lets me assume that it rather has something to do with the configuration of the pcmcia-cs package. I am using the following kernel: 2.6.8-2-386 In an earlier installation I used a 2.4-Kernel and didn't seem to have this problem. Should pcmcia-cs only be used with 2.4-Kernels? This is what I get when I look into dmesg: PCI: Enabling device :03:00.0 ( - 0002) ACPI: PCI interrupt :03:00.0[A] - GSI 10 (level, low) - IRQ 10 Build date: Sep 24 2005 Debugging version (IEEE80211) ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: H/W encryption support: WEP AES AES_CCM TKIP ath0: mac 5.9 phy 4.3 radio 4.6 ath0: Use hw queue 1 for WME_AC_BE traffic ath0: Use hw queue 0 for WME_AC_BK traffic ath0: Use hw queue 2 for WME_AC_VI traffic ath0: Use hw queue 3 for WME_AC_VO traffic ath0: Use hw queue 8 for CAB traffic ath0: Use hw queue 9 for beacons Debugging version (ATH) ath0: Atheros 5212: mem=0x1080, irq=10 ath0: no IPv6 routers present This is my /etc/network/interfaces file: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp name Ethernet LAN card # The wireless network interface auto ath0 iface ath0 inet dhcp wireless-essid LWSHOME wireless-encrestricted wireless-keyCDKDB800C5F788CCCFF0C4200 name Unknown interface type Any idea where I should be looking for the problem. I am also happy to provide additional information to how my system is setup. Thank you in advance. Louis -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: pcmcia-card (netgear wg511t) causes computer to get extremly slow ...
On Sat, 2005-09-24 at 20:10 +0200, Louis Woods wrote: Hi I didn't realize I am using a subject line already in use. I'll repost my problem under a different subject. Thank you for the hint. The problem isnt your subject line. The problem was that you replied to a message rather than just sending your question directly to the debian-user. Why does that make a difference? If you look at the headers of the email that you sent, you'll see these lines: References: [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] In-Reply-To: [EMAIL PROTECTED] In any good email client, these headers are used to show message threads (which emails are related to each other). So, by replying, you are indicating that your email has some connection to the message you are replying to. -davidc -- gpg-key: http://www.zettazebra.com/files/key.gpg signature.asc Description: This is a digitally signed message part
Re: PCMCIA wireless help needed
On Wed, 2005-03-08 at 19:45 +, Terrence Brannon wrote: eth2 IEEE 802.11-DS ESSID:not_sure_what_to_set Nickname:HERMES I Mode:Managed Frequency:2.457 GHz Access Point: 44:44:44:44:44:44 Bit Rate:2 Mb/s Tx-Power=15 dBm Sensitivity:1/3 Retry limit:4 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/92 Signal level=134/153 Noise level=134/153 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 It looks like you don't have your wireless card setup to use encryption. You will need to have the encryption turned on for your wireless card and make sure that it has the correct key to use with your hub. -- o)Derek Wueppelmann (o (D .[EMAIL PROTECTED]D). ((` http://monkey.homeip.net/ ( ) ` signature.asc Description: This is a digitally signed message part
Re: PCMCIA wireless help needed
Hi, This is what I have in my /etc/network/interfaces file: iface wlan0 inet dhcp wireless_mode managed wireless_essid homenet wireless_key xx name Wireless LAN card Hope this helps, Joe On Wed, 2005-03-08 at 19:45 +, Terrence Brannon wrote: eth2 IEEE 802.11-DS ESSID:not_sure_what_to_set Nickname:HERMES I Mode:Managed Frequency:2.457 GHz Access Point: 44:44:44:44:44:44 Bit Rate:2 Mb/s Tx-Power=15 dBm Sensitivity:1/3 Retry limit:4 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/92 Signal level=134/153 Noise level=134/153 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 It looks like you don't have your wireless card setup to use encryption. You will need to have the encryption turned on for your wireless card and make sure that it has the correct key to use with your hub. -- o)Derek Wueppelmann (o (D .[EMAIL PROTECTED]D). ((` http://monkey.homeip.net/ ( ) ` -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA wireless help needed
On Thu, 2005-04-08 at 23:53 +1000, [EMAIL PROTECTED] wrote: Hi, This is what I have in my /etc/network/interfaces file: iface wlan0 inet dhcp wireless_mode managed wireless_essid homenet wireless_key xx name Wireless LAN card Hope this helps, Have you verified that you can connect to your hub if you turn off the encryption? Also if I remember correctly the Linux wireless drivers only support certain types of encryption, so you may want to verify that the encryption type that you have set on your wireless hub is supported. -- o)Derek Wueppelmann (o (D .[EMAIL PROTECTED]D). ((` http://monkey.homeip.net/ ( ) ` signature.asc Description: This is a digitally signed message part
RE: PCMCIA wireless help needed
I noticed the results of the iwconfig do not have an Essid set? It also states encryption is off. It appears your wireless card is not connecting to the wireless network, and therefore it won't get a dhcp offer since it is technically not on the network. Having been along time since I worked with iwfonfig, I would suggest looking at either using it to set the config for your wireless card, or find the config file for that card and set the essid and encryption information needed to connectto your access point. Good luck, and I hope none of this was way off base. -Original Message- From: news [mailto:[EMAIL PROTECTED] On Behalf Of Terrence Brannon Sent: Wednesday, August 03, 2005 2:46 PM To: debian-user@lists.debian.org Subject: PCMCIA wireless help needed Hi, I would appreciate some help getting a connection to the wireless network in my house. It is an encrypted network. Here are the results of attempting ifup. I also show the contents of several config files and the results if iwconfig and iwspy. Any help is appreciated. pool-71-109-151-76:/home/metaperl/tmp/wireless# ifup eth2 Internet Software Consortium DHCP Client 2.0pl5 Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium. All rights reserved. Please contribute if you find this software useful. For info, please visit http://www.isc.org/dhcp-contrib.html sit0: unknown hardware address type 776 eth1: unknown hardware address type 24 sit0: unknown hardware address type 776 eth1: unknown hardware address type 24 Listening on LPF/eth2/00:02:2d:b2:9f:b0 Sending on LPF/eth2/00:02:2d:b2:9f:b0 Sending on Socket/fallback/fallback-net DHCPDISCOVER on eth2 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth2 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth2 to 255.255.255.255 port 67 interval 20 DHCPDISCOVER on eth2 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth2 to 255.255.255.255 port 67 interval 11 No DHCPOFFERS received. No working leases in persistent database. Exiting. Failed to bring up eth2. pool-71-109-151-76:/home/metaperl/tmp/wireless# cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 #iface eth0 inet static iface eth0 inet dhcp name Ethernet LAN card iface eth2 inet dhcp name Wireless LAN card wireless_essid not_sure_what_to_set auto eth2 pool-71-109-151-76:/home/metaperl/tmp/wireless# iwconfig lono wireless extensions. eth0 no wireless extensions. eth1 no wireless extensions. eth2 IEEE 802.11-DS ESSID:not_sure_what_to_set Nickname:HERMES I Mode:Managed Frequency:2.457 GHz Access Point: 44:44:44:44:44:44 Bit Rate:2 Mb/s Tx-Power=15 dBm Sensitivity:1/3 Retry limit:4 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=0/92 Signal level=134/153 Noise level=134/153 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 sit0 no wireless extensions. pool-71-109-151-76:/home/metaperl/tmp/wireless# ifconfig eth2 eth2 Link encap:Ethernet HWaddr 00:02:2D:B2:9F:B0 inet6 addr: fe80::202:2dff:feb2:9fb0/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:21 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) Interrupt:193 Base address:0x100 pool-71-109-151-76:/home/metaperl/tmp/wireless# -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] ___ This message is intended for the use of the person or entity to which it is addressed and may contain information that is privileged and confidential, the disclosure of which is governed by applicable law. If you are not the intended recipient, or the employee or agent responsible to deliver it to the intended recipient, you are hereby notified that any disclosure, copying or distribution of this information is strictly prohibited. If you have received this message in error, please notify the sender immediately to arrange for return or destruction of the message and any attachments.
Re: PCMCIA wireless help needed
Edwards, Thomas W. [EMAIL PROTECTED] writes: I noticed the results of the iwconfig do not have an Essid set? what is an essid? It also states encryption is off. yes. I presume there are several types? Whatever encryption they are using, it is probably whatever windows-oriented people use. I live in a Buddhist monastery and I'm pretty sure they were going for the simplest encryption you could get under Windows. It appears your wireless card is not connecting to the wireless network, and therefore it won't get a dhcp offer since it is technically not on the network. ah... thanks. Good luck, thanks and I hope none of this was way off base. no, very helpful. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA wireless help needed
Terrence Brannon [EMAIL PROTECTED] writes: Edwards, Thomas W. [EMAIL PROTECTED] writes: I noticed the results of the iwconfig do not have an Essid set? what is an essid? man wireless It also states encryption is off. good point. I asked for the encryption key and followed the instructions at http://wiki.linuxquestions.org/wiki/Wireless_networking now everything is working! It appears your wireless card is not connecting to the wireless network, and therefore it won't get a dhcp offer since it is technically not on the network. iwconfig eth2 essid any works much better than giving it a specific name -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA
RAZEK escribió: El jue, 28-07-2005 a las 20:47 +0200, boube escribió: Ola, estoy intentando instalar una tarjeta PCMCIA wireless con el chip prism54 en Sarge. He seguido al pie de la letra las instrucciones de prism54.org pero no hay manera, me da un No such device. Trasteando un poco me dí cuenta que quizás pueda estar el PCMCIA mal instalado y no ser culpa de la tarjeta en sí. Este es el extracto de lspci referente al PCMCIA: Cardbus bridge: Texas Instruments: Unknow Device ac54 (rev 01) eso ya indica q el PCMCIA reconoce la tarjeta, es un problema de drivers. prueba con apt-cache prism2 arroja unos módulos q sirven para ese chipset Ya he probado con esos drivers y no va. Creo que es de la PCMCIA porque cuando tenía otro dispostivo sin configurar en otro ordenador que ahoa no viene al caso tambien me ponía Unknow device despues de la decripcion y cuando conseguí configurarlo ya ponía la marca y el modelo exactos. Además segun pone en algunos manuales que he leido debería de poner algo sobre la tarjeta que esta insertada (Network adapter: Marca de la tarjeta: Modelo) además de la linea de PCMCIA. salu2 -- [EMAIL PROTECTED] Linux Registered User #369719 In a world without fronteirs, who needs Gates and Windows?? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA
El jue, 28-07-2005 a las 20:47 +0200, boube escribió: Ola, estoy intentando instalar una tarjeta PCMCIA wireless con el chip prism54 en Sarge. He seguido al pie de la letra las instrucciones de prism54.org pero no hay manera, me da un No such device. Trasteando un poco me dí cuenta que quizás pueda estar el PCMCIA mal instalado y no ser culpa de la tarjeta en sí. Este es el extracto de lspci referente al PCMCIA: Cardbus bridge: Texas Instruments: Unknow Device ac54 (rev 01) eso ya indica q el PCMCIA reconoce la tarjeta, es un problema de drivers. prueba con apt-cache prism2 arroja unos módulos q sirven para ese chipset A ver si me podeis ayudar, que ando un poco rallado . Salu2 -- elboube at gmail.com Linux Registered User #369719 In a world without fronteirs, who needs Gates and Windows?? salu2 -- César Ulloa R. Usuario Linux #389238 @ counter.li.org Máquina #289770 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PCMCIA network card
On Sat, Jun 25, 2005 at 09:33:49PM -0700, Rodney D. Myers wrote: On Sat, 25 Jun 2005 21:11:03 -0400 Tom Allison [EMAIL PROTECTED] wrote: Is there an entry point someone could recommend so I can find a clean path for installing a network card? It's an Orinoco Gold card. Install it with a newer kernel and it should just work Which is to say that the correct modules will be loaded when the card is inserted. Additional settings (essid, encryption keys, etc.) are set in /etc/pcmcia/wireless.opts, if needed. You may also need to list an entry in /etc/network/interfaces (I did, but my configuration in wireless.opts may be incomplete). -- Love not the world, neither the things that are in the world. If any man love the world, the love of the Father is not in him.I John 2:15 Nathan J. Malmberg [EMAIL PROTECTED] GNUPG ID: 8A9B426E The attachment is a digital signature. Get my key at subkeys.pgp.net. signature.asc Description: Digital signature
Re: PCMCIA network card
On Sat, 25 Jun 2005 21:11:03 -0400 Tom Allison [EMAIL PROTECTED] wrote: I finally dusted off my PCMCIA wireless card after a prolonged time in storage. I have some notes on how to set this up from some years back (2001 or earlier) and I suspect that the configurations for wireless cards might have changed a bit. I also know that I had a somewhat kludged install at the time. Is there an entry point someone could recommend so I can find a clean path for installing a network card? It's an Orinoco Gold card. Install it with a newer kernel and it should just work -- Rodney D. Myers [EMAIL PROTECTED] Registered Linux User #96112 ICQ#: AIM#: YAHOO: 18002350 mailman452 mailman42_5 They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety. Ben Franklin - 1759 pgpvZfeKZW1oN.pgp Description: PGP signature
Re: pcmcia ethernet probleme de hard?[resolu]
Elle marche tres bien suffit de brancher un cable ethernet avec un modem/routeur au bout -- Pensez à lire la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Pensez à rajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: pcmcia ethernet probleme de hard?[resolu]
Jeudi 5 mai 2005, 19:30:57 CEST, Debian User a écrit : Elle marche tres bien suffit de brancher un cable ethernet avec un modem/routeur au bout Tu veux dire que tu essayais d'obtenir une adresse en dhcp sans être physiquement relié à aucun serveur ? -- Sylvain Sauvage
Re: pcmcia ethernet probleme de hard?
Bonjour, #/etc/init.d/pcmcia restart #crdctl ident elle est correctement reconnue #ifup etho Je retrouve dans les message l'adresse MAC de la carte mais les diodes ne clignotent pas Le client DHCP fait ses requetes mais bien sur rien ne se passe Ca pourrait etre un probleme de hard ou il y a encore quelque chose à faire??? Merci -- Pensez à lire la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Pensez à rajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: pcmcia ethernet probleme de hard?
Le Samedi 30 Avril 2005 09:54, Debian User a écrit : Bonjour, J'avais une carte PCMCI D-link DFE-670TXD Je n'avais pas de souci particulier: connection internet OK. E dehors de mise a jours des packages je ne n'ai pas bidouillé l'ordinateur Mais depuis hier: les diodes ne fonctionnent plus. J'ai fait: A/ knoppix 3.3 ca donne rien B/ #/etc/init.d/pcmcia restart #cardctl ident elle est bien reconnue mais ifup eth0 lance le DHCP comme prévu mais les diodes ne fonctionnent pas. Je me demande si elle est pas morte. Mes questions: 1) J'ai une carte physique pcmcia d-link et une interface réseau eth0 (ifconfig) dans quel fichier l'ordinateur fait le lien entre les 2? C'est un module (visible dans lsmod), chargeable par modprobe ou insmod (modprobe gère les dépendances entre modules), et retirable par rmmod. Tu peut trouver les modules de disponibles sur ton système dans les sous-dossiers de /lib/modules/laversiondetonnoyau/. 2) Si c'est un probleme de hard que feriez vous pour le confirmer ou l'infirmer? Essayer le périphérique sur un autre ordinateur (pour voir si cela vient de la carte ou de l'ordinateur), et/ou sur un autre système d'exploitation. -- Florent -- Citation aléatoire -- Il est aussi vrai de dire que le sujet connaissant est un produit de la matière que de dire que la matière est une simple représentation du sujet connaissant. -+- Arthur Schopenhauer (1788-1860) -+- pgpPGgeLPCn6e.pgp Description: PGP signature