Re: acer driver
Wayne Topa wrote: Jonathan Kaye wrote: Wayne Topa wrote: If it came with WindBloz did it include a CD with software for that card? Does it have any software for that card installed? Did the card work in WindBloz? If you have WindBloz software for it you might get it working using the ndiswrapper package. Hi again Wayne, On the Acer website they do have the Windows XP driver for the Aspire 3500. It's called Atheros Wireless LAN B+G Driver 4.0.0.14001. I can give it a try with ndiswrapper. Cheers, Jonathan Sure you can. Get that and the ndiswrapper (which I have not used) and go for it!! Good Find Jonathan!! Wayne More info: 1. dmesg results seem to be good: [ 14.270854] ndiswrapper version 1.53 loaded (smp=yes, preempt=no) [ 14.358992] ndiswrapper: driver net5211 (,11/15/2006,5.1.1.9) loaded [ 14.359358] ndiswrapper :00:0b.0: enabling device (0010 - 0012) [ 14.359593] ndiswrapper (ZwClose:2198): closing handle 0xf78975a8 not implemented [ 14.969994] ndiswrapper: using IRQ 17 [ 15.196018] usbcore: registered new interface driver ndiswrapper [ 15.186802] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK 2. ifconfig seems more like you described. Entries only for eth0, lo and wlan0. wlan0 looks like this: wlan0 Link encap:Ethernet HWaddr 00:0e:9b:cf:bc:0c UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 Memory:e201-e202 Cheers, Jonathan -- Registerd Linux user #445917 at http://counter.li.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: acer driver
Jonathan Kaye wrote: Wayne Topa wrote: Jonathan Kaye wrote: Wayne Topa wrote: If it came with WindBloz did it include a CD with software for that card? Does it have any software for that card installed? Did the card work in WindBloz? If you have WindBloz software for it you might get it working using the ndiswrapper package. Hi again Wayne, On the Acer website they do have the Windows XP driver for the Aspire 3500. It's called Atheros Wireless LAN B+G Driver 4.0.0.14001. I can give it a try with ndiswrapper. Cheers, Jonathan Sure you can. Get that and the ndiswrapper (which I have not used) and go for it!! Good Find Jonathan!! Wayne More info: 1. dmesg results seem to be good: [ 14.270854] ndiswrapper version 1.53 loaded (smp=yes, preempt=no) [ 14.358992] ndiswrapper: driver net5211 (,11/15/2006,5.1.1.9) loaded [ 14.359358] ndiswrapper :00:0b.0: enabling device (0010 - 0012) [ 14.359593] ndiswrapper (ZwClose:2198): closing handle 0xf78975a8 not implemented [ 14.969994] ndiswrapper: using IRQ 17 [ 15.196018] usbcore: registered new interface driver ndiswrapper [ 15.186802] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK 2. ifconfig seems more like you described. Entries only for eth0, lo and wlan0. wlan0 looks like this: wlan0 Link encap:Ethernet HWaddr 00:0e:9b:cf:bc:0c UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 Memory:e201-e202 Cheers, Jonathan You are nearly there now. I would suggest you read (print) all of the UserDocs from the madwifi site. I bound my copies and used them quite a bit when I get started. Get your /etc/network/interfaces setup using those docs and refer, if needed, to the debian-reference (you have installed that, right), and you are in the pink. I haven't checked lately but there are some debian realated pages in the UserDocs you might find interesting. Way to go Jonathan! Wayne -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: acer driver
Wayne Topa wrote: You are nearly there now. I would suggest you read (print) all of the UserDocs from the madwifi site. I bound my copies and used them quite a bit when I get started. Get your /etc/network/interfaces setup using those docs and refer, if needed, to the debian-reference (you have installed that, right), and you are in the pink. I haven't checked lately but there are some debian realated pages in the UserDocs you might find interesting. Way to go Jonathan! Wayne Thanks a lot Wayne. I found an AP near our flat and we'll be able to got there and try to get the thing connected. There hardest part is being sure the correct driver is installed correctly. The results from ifconfig seem to be ok and iwconfig wlan0 also produced reasonable results. Anyway we'll have a go at connecting to an open network tomorrow. Cheers, Jonathan -- Registerd Linux user #445917 at http://counter.li.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: acer driver
Wayne Topa wrote: If it came with WindBloz did it include a CD with software for that card? Does it have any software for that card installed? Did the card work in WindBloz? If you have WindBloz software for it you might get it working using the ndiswrapper package. Hi again Wayne, On the Acer website they do have the Windows XP driver for the Aspire 3500. It's called Atheros Wireless LAN B+G Driver 4.0.0.14001. I can give it a try with ndiswrapper. Cheers, Jonathan -- Registerd Linux user #445917 at http://counter.li.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: acer driver
Jonathan Kaye wrote: Wayne Topa wrote: If it came with WindBloz did it include a CD with software for that card? Does it have any software for that card installed? Did the card work in WindBloz? If you have WindBloz software for it you might get it working using the ndiswrapper package. Hi again Wayne, On the Acer website they do have the Windows XP driver for the Aspire 3500. It's called Atheros Wireless LAN B+G Driver 4.0.0.14001. I can give it a try with ndiswrapper. Cheers, Jonathan Sure you can. Get that and the ndiswrapper (which I have not used) and go for it!! Good Find Jonathan!! Wayne -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: acer driver
Wayne Topa wrote: Jonathan Kaye wrote: Wayne Topa wrote: If it came with WindBloz did it include a CD with software for that card? Does it have any software for that card installed? Did the card work in WindBloz? If you have WindBloz software for it you might get it working using the ndiswrapper package. Hi again Wayne, On the Acer website they do have the Windows XP driver for the Aspire 3500. It's called Atheros Wireless LAN B+G Driver 4.0.0.14001. I can give it a try with ndiswrapper. Cheers, Jonathan Sure you can. Get that and the ndiswrapper (which I have not used) and go for it!! Good Find Jonathan!! Wayne Hi Wayne, Seems to work. ndiswrapper seemed happy with the set up and nicely installed the XP drivers. I'm not near an AP but I noticed that kwifimanager has a green bar indicating dl-ul speed now that it didn't have before. We'll take the laptop to an AP point and give it a try. I'll report the results later in the day. Cheers, Jonathan -- Registerd Linux user #445917 at http://counter.li.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]