Re: Hamm == Slink ¡Creo que lo hice! :-)
El martes 13 julio de 1999 a las 11:16:37, Javier Fdz-Sanguino Pen~a dijo: 2.- En la actualización prácticamente sólo se utiliza el CD1, al CD2 ni caso le hace el apt-get. ¿Como instalo los paquetes que estan en el CD2, me refiero sobre todo a gnome, kde, xfree86.3.3.3.1, en el directorio bla.bla/locale/locale/? ¿que entrada debería usar en el source.list del método apt del dselect? No hace falta que cambies nada, utiliza apt-cdrom pero mete primero el CD2 para que la lista de paquetes de ese CD, en el artículo se explica esto y el por qué. Sí, hace falta. Si no se le indica no te reconoce el directorio local/local aunque sí los demás. Yo en una instalación nueva solo tuve que indicarle donde estaba el local/local y haciendo un cat al /etc/apt/sources.list me lo ha colocado todo tal que... deb cdrom:slink (2.1) binary-i386 (2 de 2)/ debian/dists/frozen/contrib/binary-i386/ deb cdrom:slink (2.1) binary-i386 (2 de 2)/ debian/dists/frozen/main/binary-i386/ deb cdrom:slink (2.1) binary-i386 (2 de 2)/ debian/dists/frozen/non-US/binary-i386/ deb cdrom:slink (2.1) binary-i386 (2 de 2)/ debian/dists/frozen/non-free/binary-i386/ deb cdrom:slink (2.1) binary-i386 (2 de 2)/ debian/dists/local/local/binary-i386/ deb cdrom:slink (2.1) binary-i386 (1 de 2)/ debian/dists/frozen/contrib/binary-i386/ deb cdrom:slink (2.1) binary-i386 (1 de 2)/ debian/dists/frozen/main/binary-i386/ deb cdrom:slink (2.1) binary-i386 (1 de 2)/ debian/dists/frozen/non-US/binary-i386/ deb cdrom:slink (2.1) binary-i386 (1 de 2)/ debian/dists/frozen/non-free/binary-i386/ deb cdrom:slink (2.1) binary-i386 (1 de 2)/ debian/dists/local/local/binary-i386/ ... pero en una actualización de hamm sí tuve que indicarselo a mano: deb file:/cdrom/debian stable main contrib non-free non-US deb file:/cdrom/debian local local Saludos. -- Vicen [EMAIL PROTECTED] Debian 2.1 - LINUX User Reg: 90136 Albacete - ES pgpKV2AIJDf3u.pgp Description: PGP signature
Re: Hamm == Slink ¡Creo que lo hice! :-)
On Mon, Jul 12, 1999 at 10:33:41PM +0200, Ignacio J. Alonso wrote: Hola Ayer en un 'ratito' decidi actualizarme a Slink usando la Citius de LA y la verdad que el método de actualización apt-get es una pasada :-) (ya lo use para pasar de Bo a Hamm). Todo me funciona (incluso las X) más o menos aunque hay cosas que no me acaban de convencer (p.e. xdm) y otras que no entiendo o desconozco, por ejemplo: 1.- ¿Como se configuran ahora las X? El fichero XF86Config parece no hacer nada y el fichero XF86Setup no existe ¿¿?? ¿Que deberia hacer si quisiera configurar las X desde el principio? Umm.. si no me equivoco la actualización tiene que hacerse a mano en el caso de los paquetes de X porque se han reestructurado y estan ahora los binarios repartidos entre varios paquetes. El xf86config, por ejemplo esta en el servidor de VGA16, el XF86Setup deberias tenerlo por ahí. 2.- En la actualización prácticamente sólo se utiliza el CD1, al CD2 ni caso le hace el apt-get. ¿Como instalo los paquetes que estan en el CD2, me refiero sobre todo a gnome, kde, xfree86.3.3.3.1, en el directorio bla.bla/locale/locale/? ¿que entrada debería usar en el source.list del método apt del dselect? No hace falta que cambies nada, utiliza apt-cdrom pero mete primero el CD2 para que la lista de paquetes de ese CD, en el artículo se explica esto y el por qué. Tengo más preguntas y dudas pero vayamos poco a poco para no ser pesado O:-) Me parece bien :P Javi PD: Ya he vuelto de vacaciones después de una semana de descanso en la playa :)
Hamm == Slink ¡Creo que lo hice! :-)
Hola Ayer en un 'ratito' decidi actualizarme a Slink usando la Citius de LA y la verdad que el método de actualización apt-get es una pasada :-) (ya lo use para pasar de Bo a Hamm). Todo me funciona (incluso las X) más o menos aunque hay cosas que no me acaban de convencer (p.e. xdm) y otras que no entiendo o desconozco, por ejemplo: 1.- ¿Como se configuran ahora las X? El fichero XF86Config parece no hacer nada y el fichero XF86Setup no existe ¿¿?? ¿Que deberia hacer si quisiera configurar las X desde el principio? 2.- En la actualización prácticamente sólo se utiliza el CD1, al CD2 ni caso le hace el apt-get. ¿Como instalo los paquetes que estan en el CD2, me refiero sobre todo a gnome, kde, xfree86.3.3.3.1, en el directorio bla.bla/locale/locale/? ¿que entrada debería usar en el source.list del método apt del dselect? Tengo más preguntas y dudas pero vayamos poco a poco para no ser pesado O:-) -- ===NaClU2===IJAS _/ _/ _/_/_/ _/_/_/ Desde: 40º25'N 3º39'O _/ _/ _/ _/ _/ _/ _/ _/ _/_/_/ _/_/_/ mailto:[EMAIL PROTECTED] _/ _/ _/ _/ _/ _/ _/ _/_/_/ _/ _/ _/_/_/http://web.jet.es/ijalonso
Hamm -- Slink: 1. Compose-key lost 2. X11-display problem
Hallo, Last night I upgraded my mixed hamm/slink/potato system to a slink-based system. Everything is working satisfactorily now except for the two problems mentioned in the subject line. 1. I cannot get the compose key working again in console mode. When this happened in my previous upgrade I solved it by gzipping and copying the file /drivers/char/defkeymap.map from my kernel-source (2.2.9)tree to /etc/kbd/default.map.gz. It did not help this time. I even copied the backup-file I had from my previous /etc/kbd/default.map.gz but that did not help. I hope somebody can help me with this one. I cannot afford to spend another day or two reconfiguring my system. 2. I have gnome installed and use icewm with it. I use startx. Xwindows comes up in 1024x768-mode and CrtlAltKP_+/KP_- does not change anythin in the display. How can I repair that? The display section in my XF86Config contains the following lines: Section Screen Driver accel Device S3 86C764 (generic) Monitor My Monitor Subsection Display Depth 8 Modes 800x600 1024x768 ViewPort0 0 Virtual 1152 800 EndSubsection Subsection Display Depth 16 Modes 640x480 800x600 ViewPort0 0 Virtual 800 600 EndSubsection Subsection Display Depth 24 Modes 640x480 ViewPort0 0 Virtual 640 480 EndSubsection Subsection Display Depth 32 Modes 640x400 ViewPort0 0 Virtual 640 400 EndSubsection Johann -- | Johann Spies Windsorlaan 19 | | [EMAIL PROTECTED]3201 Pietermaritzburg | | Tel/Faks Nr. +27 331-46-1310 Suid-Afrika (South Africa) | -- And he said unto Jesus, Lord, remember me when thou comest into thy kingdom. And Jesus said unto him, Verily I say unto thee, To day shalt thou be with me in paradise. Luke 23:42,43
Re: Xsetlocale problem after hamm - slink
I applied the diff done by Magallo at http://master.debian.org/~mmagallo/packages/wmaker/ and that fixed the locale problems, thanks! Now all I have to do is figure out why netscape dies with a bus error... :( -- Chris Frost | http://www.frostnet.advicom.net/chris/ -+-- Public PGP Key: Email [EMAIL PROTECTED] with the subject retrieve pgp key or visit http://www.frostnet.advicom.net/chris/about/pgp_key.phtml pgp3ldla3CsFp.pgp Description: PGP signature
Xsetlocale problem after hamm - slink
I just upgraded an i386 box from hamm slink (a very rocky upgrade on this box), and when starting Window Maker 0.60 which I compiled under hamm I get an error message with an undefined reference to `_Xsetlocale'. Trying to compile WM 0.60 does the same, giving the following output: Making all in src make[1]: Entering directory `/usr/local/src/WindowMaker-0.60.0/src' /bin/sh ../libtool --mode=link gcc -g -O2 -o wmaker actions.o appicon.o application.o appmenu.o balloon.o client.o colormap.o defaults.o dialog.o dock.o dockedapp.o event.o framewin.o gnome.o icon.o kwm.o list.o main.o menu.o misc.o motif.o moveres.o openlook.o pixmap.o placement.o properties.o proplist.o resources.o rootmenu.o screen.o session.o shutdown.o stacking.o startup.o superfluous.o switchmenu.o texture.o usermenu.o xdnd.o xmodifier.o xutil.o wcore.o wdefaults.o window.o winmenu.o winspector.o workspace.o wmsound.o text.o ../WINGs/libWINGs.a ../wrlib/libwraster.la -L/usr/local/lib -L/usr/X11R6/lib -lPropList -ltiff -lXpm -lpng -lz -ljpeg -lXext -lX11-ldl-lm gcc -g -O2 -o .libs/wmaker actions.o appicon.o application.o appmenu.o balloon.o client.o colormap.o defaults.o dialog.o dock.o dockedapp.o event.o framewin.o gnome.o icon.o kwm.o list.o main.o menu.o misc.o motif.o moveres.o openlook.o pixmap.o placement.o properties.o proplist.o resources.o rootmenu.o screen.o session.o shutdown.o stacking.o startup.o superfluous.o switchmenu.o texture.o usermenu.o xdnd.o xmodifier.o xutil.o wcore.o wdefaults.o window.o winmenu.o winspector.o workspace.o wmsound.o text.o ../WINGs/libWINGs.a ../wrlib/.libs/libwraster.so -L/usr/local/lib -L/usr/X11R6/lib -lPropList -ltiff -lXpm -lpng -lz -ljpeg -lXext -lX11 -ldl -lm -D__LIBTOOL_IS_A_FOOL__ ld: warning: libjpeg.so.62, needed by /usr/lib/libtiff.so, may conflict with libjpeg.so.6a main.o: In function `main': /usr/local/src/WindowMaker-0.60.0/src/main.c:482: undefined reference to `_Xsetlocale' make[1]: *** [wmaker] Error 1 make[1]: Leaving directory `/usr/local/src/WindowMaker-0.60.0/src' make: *** [all-recursive] Error 1 What lack in packages or conflict could be causing this? thanks! -- Chris Frost | http://www.frostnet.advicom.net/chris/ -+-- Public PGP Key: Email [EMAIL PROTECTED] with the subject retrieve pgp key or visit http://www.frostnet.advicom.net/chris/about/pgp_key.phtml pgpc82BUbdA1p.pgp Description: PGP signature
Re: some losses after hamm-slink
Subject: some losses after hamm-slink Date: Sun, May 30, 1999 at 02:26:51PM +0400 In reply to:Eugene Sevinian Quoting Eugene Sevinian([EMAIL PROTECTED]): Hi, after upgrading to slink am unable to work with floppy: Operation not supported by device or something like that. What does grep CONFIG_BLK_DEV_FD /usr/src/linux/.config say? Another problem is that it seems that old way of copying kernel (2.2.5) to another harddisk of floppy by doing dd with previosly set root device by rdev also does not work. Booting hangs at root device mounting point. What I am doing wrong? I simply cp the bzImage to the /boot of all my different distributions. I dd if=... to my floppy for a boot disk but not to the other dists. HTH, YMMV, HAND -- Every program has two purposes -- one for which it was written and another for which it wasn't. ___ Wayne T. Topa [EMAIL PROTECTED]
some losses after hamm-slink
Hi, after upgrading to slink am unable to work with floppy: Operation not supported by device or something like that. Another problem is that it seems that old way of copying kernel (2.2.5) to another harddisk of floppy by doing dd with previosly set root device by rdev also does not work. Booting hangs at root device mounting point. What I am doing wrong? TIA, Eugene Sevinian CRD, YerPhI, 375036, Armenia URL: http://crdlx5.yerphi.am/ Phone: 374-2-344873
HAMM - SLINK
I have HAMM installed. I have the slink distro files. what's the best way to upgrade (apt?) and how? Matthew McFarlane -
Re: HAMM - SLINK
yOn Sat, 29 May 1999, Matthew McFarlane wrote: I have HAMM installed. I have the slink distro files. what's the best way to upgrade (apt?) and how? The instructions are in the file main/Release-Notes. I think I added apt as a method in dselect, and then let dselect to its thing. ...RickM...
Re: HAMM - SLINK
On Sat, May 29, 1999 at 04:44:37PM -0400, Matthew McFarlane wrote: I have HAMM installed. I have the slink distro files. what's the best way to upgrade (apt?) and how? apt-get dist-upgrade There is an upgrade guide somewhere in the top level directory structure. Bob -- Bob Nielsen Internet: [EMAIL PROTECTED] Tucson, AZ AMPRnet: [EMAIL PROTECTED] DM42nh http://www.primenet.com/~nielsen
hamm/slink gotcha
Hello all: Hamm (up to date as of about 3 months ago) update to slink using dselect gives the errors (upon Install): internal error - no filename at -e line 12, P chunk 14. installation script returned error exit status 1. Press RETURN to continue. Anyone have a clue why I am getting this behavior? I have a local mirror of the debian archive that I believe I am pointing to correctly. Thanks, nathan -- Nathan O. Siemers - Transcriptional Profiling, Bioinformatics - Division of Applied Genomics - Bristol-Myers Squibb Pharmaceutical Research Institute - Hopewell Building 3B - P.O. Box 5400, Princeton, NJ 08543-5400 - 609 818-6568 - [EMAIL PROTECTED]
Hamm -- Slink now no color ....
I have recently upgraded to slink and now the following apps only display in monochrome: lynx 2.8.1rel.2 mutt 0.95.3i slrn 0.9.5.3 I don't get any error mesages and the config files are set to use color. (minicom is still in color)
Re: Hamm -- Slink now no color ....
On Mon, Mar 08, 1999 at 06:00 -0500, Jonathan D. Proulx wrote: I have recently upgraded to slink and now the following apps only display in monochrome: lynx 2.8.1rel.2 mutt 0.95.3i slrn 0.9.5.3 I don't get any error mesages and the config files are set to use color. (minicom is still in color) You need to install the xbase package (well, that is what fixed the same problem for me). Cheers Dave -- Dave Swegen | Debian 2.0 on Linux i386 2.2.1 [EMAIL PROTECTED] | PGP key available on request [EMAIL PROTECTED] | Linux: The Choice of a GNU Generation --
Re: Hamm--Slink, now fetchmail/exim behaves strangely
you wrote: Graham Ashton [EMAIL PROTECTED] writes: On Tuesday 02 March, Mark Phillips wrote: I've just upgraded from Hamm to Slink. Fetchmail seems to work the same as before, except that now, only the first 10 messages get to my mail box straight away. I've got the same problem. Strange, isn't it. when looking in the log file there is: no immediate delivery: more than 10 messages received in one connection if you want the other messages immediatly you can do: exim -q I suppose it would be possible to change this behaviour, but I haven't found how; I find it useful for dialup connection, the mail download can be faster when it doesn't deliver simultaneously. I have the exim -q thing in my disconnection script. so the queue is run as soon as the line goes down. (And a fetchmail in the script that runs when the connection is made.) Helge Hafting
Re: Hamm--Slink, now fetchmail/exim behaves strangely
Subject: Re: Hamm--Slink, now fetchmail/exim behaves strangely Date: Mon, Mar 08, 1999 at 07:21:36PM +0100 In reply to:Helge Hafting Quoting Helge Hafting([EMAIL PROTECTED]): you wrote: Graham Ashton [EMAIL PROTECTED] writes: On Tuesday 02 March, Mark Phillips wrote: I've just upgraded from Hamm to Slink. Fetchmail seems to work the same as before, except that now, only the first 10 messages get to my mail box straight away. I've got the same problem. Strange, isn't it. when looking in the log file there is: no immediate delivery: more than 10 messages received in one connection if you want the other messages immediatly you can do: exim -q I suppose it would be possible to change this behaviour, but I haven't found how; I find it useful for dialup connection, the mail download can be faster when it doesn't deliver simultaneously. I have the exim -q thing in my disconnection script. so the queue is run as soon as the line goes down. (And a fetchmail in the script that runs when the connection is made.) Helge From your answer can I assume you run your 'disconnection' script as root? I have been trying to do the same thing but can't do it as a common user, yet. I don't want to change permissions on exim if I can help it. Helge Hafting Wayne -- You can't make a program without broken egos. ___ Wayne T. Topa [EMAIL PROTECTED]
Re: Hamm--Slink, now fetchmail/exim behaves strangely
On Tue, 2 Mar 1999, Graham Ashton wrote: On Tuesday 02 March, Mark Phillips wrote: I've just upgraded from Hamm to Slink. Fetchmail seems to work the same as before, except that now, only the first 10 messages get to my mail box straight away. I've got the same problem. Strange, isn't it. This makes me think twice about upgrading my whole system again even if Debian is supposed to make that easy. On my previous upgrade 1.3 to Hamm, it took me nearly 3 days and many hours to get all my user programs running again and fixing all the broken configurations. Getting my mail system to work again was a real pain in the neck. I would not like to go through that again. Johann. -- | Johann Spies Windsorlaan 19 | | [EMAIL PROTECTED]3201 Pietermaritzburg | | Tel/Faks Nr. +27 331-46-1310 Suid-Afrika (South Africa) | -- I will lift up mine eyes unto the hills, from whence cometh my help. My help cometh from the LORD, which made heaven and earth. Psalms 121:1,2
Hamm--Slink, now fetchmail/exim behaves strangely
I've just upgraded from Hamm to Slink. Fetchmail seems to work the same as before, except that now, only the first 10 messages get to my mail box straight away. The rest of the messages sit around in the /var/spool/exim/input directory for about 5 minutes before eventually being delivered to my mail box. Under Hamm the messages would all go straight to my mail box. Why is it that under Slink, only the first 10 get there directly, and the rest take their time? Thanks, Mark. _/\___/~~\ /~~\_/~~\__/~~\__Mark_Phillips /~~\_/[EMAIL PROTECTED] /~~\HE___/~~\__/~~\APTAIN_ /~~\__/~~\ __ They told me I was gullible ... and I believed them!
Re: Hamm--Slink, now fetchmail/exim behaves strangely
On Tuesday 02 March, Mark Phillips wrote: I've just upgraded from Hamm to Slink. Fetchmail seems to work the same as before, except that now, only the first 10 messages get to my mail box straight away. I've got the same problem. Strange, isn't it. -- Graham
Re: Hamm - Slink PROBLEMS
On 1 March 1999 at 15:15, Ed Cogburn wrote: [EMAIL PROTECTED] wrote: I am having problems upgrading my new box from hamm to slink. I have instal led apt for hamm. I did changed my /etc/apt/sources.list file to point to ftp://ftp.us.debia.org/frozen main contrib non-free. I then did an apt-get update followed by an apt-get dist-upgrade. While trying to d/l, apt gave me the following errors: ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/admin/ locales_2.0.7.19981211-5.deb 550 /debian/dists/frozen/main/binary-i386/admin/ locales_2.0.7.19981211-5.deb: not a plain file. [other errors snipped] I had to give up on us.debian about a week ago because of these kinds of errors. Switch to another mirror, or ftp.debian.org, until us.debian is fixed. I've had these errors before from other sites, I had it at the same time as other errors telling me files didn't exist, I think it's linked to the site updating. -- Stuart Miles[EMAIL PROTECTED] [EMAIL PROTECTED]
Re: Hamm--Slink, now fetchmail/exim behaves strangely
*- On 2 Mar, Mark Phillips wrote about Hamm--Slink, now fetchmail/exim behaves strangely I've just upgraded from Hamm to Slink. Fetchmail seems to work the same as before, except that now, only the first 10 messages get to my mail box straight away. The rest of the messages sit around in the /var/spool/exim/input directory for about 5 minutes before eventually being delivered to my mail box. Under Hamm the messages would all go straight to my mail box. Why is it that under Slink, only the first 10 get there directly, and the rest take their time? It is because fetchmail is flooding the smtp port with connections and exim stops delivering mail when this happens. I have put the following at the end of my fetchmailrc, it forces exim it empty the que immediately. postconnect exim -q -- Brian - Never criticize anybody until you have walked a mile in their shoes, because by that time you will be a mile away and have their shoes. - unknown Mechanical Engineering[EMAIL PROTECTED] Purdue University http://www.ecn.purdue.edu/~servis -
Re: Hamm--Slink, now fetchmail/exim behaves strangely
Graham Ashton [EMAIL PROTECTED] writes: On Tuesday 02 March, Mark Phillips wrote: I've just upgraded from Hamm to Slink. Fetchmail seems to work the same as before, except that now, only the first 10 messages get to my mail box straight away. I've got the same problem. Strange, isn't it. when looking in the log file there is: no immediate delivery: more than 10 messages received in one connection if you want the other messages immediatly you can do: exim -q I suppose it would be possible to change this behaviour, but I haven't found how; Hubert
Re: Hamm--Slink, now fetchmail/exim behaves strangely
[EMAIL PROTECTED] writes: I suppose it would be possible to change this behaviour, but I haven't found how; Add this to the MAIN CONFIGURATION SETTINGS section of your exim.conf file: # Have exim deliver all mail that's received in a single connection. # Normally it will deliver the first 10 and then queue the rest. smtp_accept_queue_per_connection = 0 -- +- pgp key available --+ | Dale E. Martin | Clifton Labs, Inc. | Senior Computer Engineer| | [EMAIL PROTECTED]|http://www.clifton-labs.com | +--+
Re: Hamm - Slink PROBLEMS
[EMAIL PROTECTED] wrote: I am having problems upgrading my new box from hamm to slink. I have installed apt for hamm. I did changed my /etc/apt/sources.list file to point to ftp://ftp.us.debia.org/frozen main contrib non-free. I then did an apt-get update followed by an apt-get dist-upgrade. While trying to d/l, apt gave me the following errors: ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/admin/ locales_2.0.7.19981211-5.deb 550 /debian/dists/frozen/main/binary-i386/admin/ locales_2.0.7.19981211-5.deb: not a plain file. [other errors snipped] I had to give up on us.debian about a week ago because of these kinds of errors. Switch to another mirror, or ftp.debian.org, until us.debian is fixed. -- Ed C.
Hamm - Slink PROBLEMS
I am having problems upgrading my new box from hamm to slink. I have installed apt for hamm. I did changed my /etc/apt/sources.list file to point to ftp://ftp.us.debia.org/frozen main contrib non-free. I then did an apt-get update followed by an apt-get dist-upgrade. While trying to d/l, apt gave me the following errors: ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/admin/locales_2.0.7.19981211-5.deb 550 /debian/dists/frozen/main/binary-i386/admin/locales_2.0.7.19981211-5.deb: not a plain file. ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/base/libc6_2.0.7.19981211-5.deb 550 /debian/dists/frozen/main/binary-i386/base/libc6_2.0.7.19981211-5.deb: not a plain file. ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/base/makedev_2.3.1-16.deb 550 /debian/dists/frozen/main/binary-i386/base/makedev_2.3.1-16.deb: not a plain file. ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/base/modconf_0.2.24.1.deb 550 /debian/dists/frozen/main/binary-i386/base/modconf_0.2.24.1.deb: not a plain file. ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/base/timezones_2.0.7.19981211-5.deb 550 /debian/dists/frozen/main/binary-i386/base/timezones_2.0.7.19981211-5.deb: not a plain file. ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/devel/libc6-dev_2.0.7.19981211-5.deb 550 /debian/dists/frozen/main/binary-i386/devel/libc6-dev_2.0.7.19981211-5.deb: not a plain file. ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/x11/xfree86-common_3.3.2.3a-10.deb 550 /debian/dists/frozen/main/binary-i386/x11/xfree86-common_3.3.2.3a-10.deb: not a plain file. ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/x11/xlib6g-dev_3.3.2.3a-10.deb 550 /debian/dists/frozen/main/binary-i386/x11/xlib6g-dev_3.3.2.3a-10.deb: not a plain file. ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/x11/xlib6g_3.3.2.3a-10.deb 550 /debian/dists/frozen/main/binary-i386/x11/xlib6g_3.3.2.3a-10.deb: not a plain file. I have tried to upgrade multiple times, so I know that it is not a site specific problem. What is going on? Thanks, Chris
Re: Hamm - Slink PROBLEMS
On Sat, Feb 27, 1999 at 08:55:20PM -0500, [EMAIL PROTECTED] wrote: I am having problems upgrading my new box from hamm to slink. I have installed apt for hamm. I did changed my /etc/apt/sources.list file to point to ftp://ftp.us.debia.org/frozen main contrib non-free. I then did an apt-get update followed by an apt-get dist-upgrade. While trying to d/l, apt gave me the following errors: ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/admin/locales_2.0.7.19981211-5.deb 550 /debian/dists/frozen/main/binary-i386/admin/locales_2.0.7.19981211-5.deb: not a plain file. ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/base/libc6_2.0.7.19981211-5.deb 550 /debian/dists/frozen/main/binary-i386/base/libc6_2.0.7.19981211-5.deb: not a plain file. ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/base/makedev_2.3.1-16.deb 550 /debian/dists/frozen/main/binary-i386/base/makedev_2.3.1-16.deb: not a plain file. ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/base/modconf_0.2.24.1.deb 550 /debian/dists/frozen/main/binary-i386/base/modconf_0.2.24.1.deb: not a plain file. ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/base/timezones_2.0.7.19981211-5.deb 550 /debian/dists/frozen/main/binary-i386/base/timezones_2.0.7.19981211-5.deb: not a plain file. ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/devel/libc6-dev_2.0.7.19981211-5.deb 550 /debian/dists/frozen/main/binary-i386/devel/libc6-dev_2.0.7.19981211-5.deb: not a plain file. ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/x11/xfree86-common_3.3.2.3a-10.deb 550 /debian/dists/frozen/main/binary-i386/x11/xfree86-common_3.3.2.3a-10.deb: not a plain file. ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/x11/xlib6g-dev_3.3.2.3a-10.deb 550 /debian/dists/frozen/main/binary-i386/x11/xlib6g-dev_3.3.2.3a-10.deb: not a plain file. ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/x11/xlib6g_3.3.2.3a-10.deb 550 /debian/dists/frozen/main/binary-i386/x11/xlib6g_3.3.2.3a-10.deb: not a plain file. I have tried to upgrade multiple times, so I know that it is not a site specific problem. What is going on? Thanks, Chris -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null I had that problem this afternoon while updating my potato system. Try ftp.debian.org instead. It has all of those packages. Hopefully, the ftp.us.debian.org maintainer is reading this message. -- Stephen Pitts [EMAIL PROTECTED] webmaster - http://www.mschess.org
Re: Hamm - Slink PROBLEMS
Subject: Hamm - Slink PROBLEMS Date: Sat, Feb 27, 1999 at 08:55:20PM -0500 In reply to:[EMAIL PROTECTED] Quoting [EMAIL PROTECTED]([EMAIL PROTECTED]): I am having problems upgrading my new box from hamm to slink. I have installed apt for hamm. I did changed my /etc/apt/sources.list file to point to ftp://ftp.us.debia.org/frozen main contrib non-free. I then did an If this is how it really looks thats why it doesn't work. See below. apt-get update followed by an apt-get dist-upgrade. While trying to d/l, apt gave me the following errors: This deb http://http.us.debian.org/debian slink main contrib non-free or this deb http://ftp1.us.debian.org/debian slink main contrib non-free and this deb http://conan.eecg.toronto.edu slink/non-US Packages You can only have one line uncommented for (main contrib non-free) I have 4 or 5 there just in case a site is not up or is busy and then I try another. So usr either of the slink main lines and then the non-US and you will have everything. Syntax is important! -- Turnaucka's Law: The attention span of a computer is only as long as its electrical cord. ___ Wayne T. Topa [EMAIL PROTECTED]
Re: Hamm - Slink PROBLEMS
It may be a bug, but I am not sure. You can fix it by using the http port. That is, change your sources.list to http://ftp.us.debian.org... hope it helps... Shao Zhang - Running Debian 2.1 ___ _ _ Department of Communications/ __| |_ __ _ ___ |_ / |_ __ _ _ _ __ _ University of New South Wales \__ \ ' \/ _` / _ \ / /| ' \/ _` | ' \/ _` | Sydney, Australia |___/_||_\__,_\___/ /___|_||_\__,_|_||_\__, | Email: [EMAIL PROTECTED]|___/ _ On Sat, 27 Feb 1999 [EMAIL PROTECTED] wrote: I am having problems upgrading my new box from hamm to slink. I have installed apt for hamm. I did changed my /etc/apt/sources.list file to point to ftp://ftp.us.debia.org/frozen main contrib non-free. I then did an apt-get update followed by an apt-get dist-upgrade. While trying to d/l, apt gave me the following errors: ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/admin/locales_2.0.7.19981211-5.deb 550 /debian/dists/frozen/main/binary-i386/admin/locales_2.0.7.19981211-5.deb: not a plain file. ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/base/libc6_2.0.7.19981211-5.deb 550 /debian/dists/frozen/main/binary-i386/base/libc6_2.0.7.19981211-5.deb: not a plain file. ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/base/makedev_2.3.1-16.deb 550 /debian/dists/frozen/main/binary-i386/base/makedev_2.3.1-16.deb: not a plain file. ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/base/modconf_0.2.24.1.deb 550 /debian/dists/frozen/main/binary-i386/base/modconf_0.2.24.1.deb: not a plain file. ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/base/timezones_2.0.7.19981211-5.deb 550 /debian/dists/frozen/main/binary-i386/base/timezones_2.0.7.19981211-5.deb: not a plain file. ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/devel/libc6-dev_2.0.7.19981211-5.deb 550 /debian/dists/frozen/main/binary-i386/devel/libc6-dev_2.0.7.19981211-5.deb: not a plain file. ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/x11/xfree86-common_3.3.2.3a-10.deb 550 /debian/dists/frozen/main/binary-i386/x11/xfree86-common_3.3.2.3a-10.deb: not a plain file. ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/x11/xlib6g-dev_3.3.2.3a-10.deb 550 /debian/dists/frozen/main/binary-i386/x11/xlib6g-dev_3.3.2.3a-10.deb: not a plain file. ERROR ftp://ftp.us.debian.org/debian/dists/frozen/main/binary-i386/x11/xlib6g_3.3.2.3a-10.deb 550 /debian/dists/frozen/main/binary-i386/x11/xlib6g_3.3.2.3a-10.deb: not a plain file. I have tried to upgrade multiple times, so I know that it is not a site specific problem. What is going on? Thanks, Chris -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
hamm, slink
Hi What are those (in subject) ? Thanx !
Re: hamm, slink
Check this link out: http://www.debian.org/doc/FAQ/ See section 6.3 Kent Darko Martic wrote: Hi What are those (in subject) ? Thanx ! -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Menus locales en Hamm/Slink
Ayer consegui tener en mi casa (hamm) menus locales en xwindow, simplemente generando un fichero identico a los gue vienen en un paquete, colocandolo en /etc/menu/ y diciendole que esa entrada de menu viene del paquete local. Pues esto en el slink de la faena (menu 1.5-12) no me funciona. ¿Alguien tiene alguna idea de porque? -- \/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\ Jordi Román Mejiase-mail: [EMAIL PROTECTED] Autònoma ObertaServei de InformàticaUniversitat Autónoma de Barcelona /\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/ ?package(local.sesiones):needs=text section=Maquinas title=sh [EMAIL PROTECTED] command=ssh -C -l aoadmd ponent ?package(local.sesiones):needs=text section=Maquinas title=sh [EMAIL PROTECTED] command=ssh -C -l aoadmd migjorn ?package(local.sesiones):needs=text section=Maquinas title=sh [EMAIL PROTECTED] command=ssh -C -l aoadm marinada ?package(local.sesiones):needs=text section=Maquinas title=sh [EMAIL PROTECTED] command=ssh -C -l aoadm xaloc ?package(local.sesiones):needs=text section=Maquinas title=sh [EMAIL PROTECTED] command=ssh -C -l gtides ponent ?package(local.sesiones):needs=text section=Maquinas title=sh [EMAIL PROTECTED] command=ssh -C -l gtitest ponent ?package(local.sesiones):needs=text section=Maquinas title=sh [EMAIL PROTECTED] command=ssh -C -l gti marinada
HAMM-SLINK Upgrade Howto
For those of you interested I have written a small howto document on upgrading to SLINK from HAMM. I still have some minor changes to make to it but it is still usuable. The only thing I am missing is the exact name of one package...but the system will tell you what that is anyways so it's no big deal. Hope this helps someone. Ivan =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Ivan E. Moore IIRev. Krusty http://www.tdyc.com[EMAIL PROTECTED] -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=- Imagination is more important than knowledge - Albert Einstien =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Re: setfont; bo, hamm, slink
On: Thu, 26 Nov 1998 13:24:54 +0400 (AMT) Eugene Sevinian writes: Hi all, Recently I am doing some job with console fonts and it turned that after running $setfont some-font $setfont the mc and some other programs are losing the pseudographic characters which are used to draw frames, borders etc. Instead pseudographic symbols the 'q', 'x' and other leters are appearing on the screen. At the same time everything is correct on the BO. I would like to know is it fixed in slink. Don't forget the -u lat1u.uni argument to setfont, at least I use it when loading fonts for svgatextmode. Torsten
setfont; bo, hamm, slink
Hi all, Recently I am doing some job with console fonts and it turned that after running $setfont some-font $setfont the mc and some other programs are losing the pseudographic characters which are used to draw frames, borders etc. Instead pseudographic symbols the 'q', 'x' and other leters are appearing on the screen. At the same time everything is correct on the BO. I would like to know is it fixed in slink. Thanks, Eugene Sevinian CRD, YerPhI, 375036, Armenia Phone: 374-2-344873
hamm-slink ?
Hello, probably I missed; when I ghave hamm installed how can I upgrade to slink ? -- Matus fantomas Uhlar, sysadmin at NETLAB+ Kosice, Slovakia BIC coord for *.sk; admin of netlab.irc.sk; co-admin of irc.felk.cvut.cz
[HELP:]howto hamm-slink + dpkg problems
hello, i didn't find any README in the slink directory, so how does the upgrade work (and the maintenance...) do i simply install the packages of the slink directory? In fact i would like to have packages like gnome easily installed and maintained through dselect... and that seems possible only upgrading to slink... second problem: my system seems to have problems with dpkg, i couldn't get it install the gmp package, no way i corresponded with the package mantainer but after some initial guesses, didn't hear anymore from him :( result are some packages that are set as broken further when trying to retrieve non-US packages, despite the fact that the Package file is fetched at the right location, when trying to download the path used by dselect is worng: Checking for Packages file... /pub/mirror/non-us.debian.org/debian-non-US/hamm/binary-i386/Packages.gz but: Connecting to ftp.inka.de... Login as anonymous... Setting transfer mode to binary... Cd to `/debian'... getting: dists/stable/non-US/binary-i386/pgp-us_2.6.3a-4.deb (283332) dists/stable/non-US/binary-i386/pgp-us_2.6.3a-4.deb: No such file or directory.
Re: [HELP:]howto hamm-slink + dpkg problems
Bruno Boettcher [EMAIL PROTECTED] writes: hello, i didn't find any README in the slink directory, so how does the upgrade work (and the maintenance...) do i simply install the packages of the slink directory? In fact i would like to have packages like gnome easily installed and maintained through dselect... and that seems possible only upgrading to slink... Install apt. And set it up. You can then install packages from slink by: apt-get install gnome It will automatically fulfill the necessary dependencies. Your system still remains hamm (in most places). -- [EMAIL PROTECTED] [EMAIL PROTECTED] KeyID: 2048/E451C639 1998/01/28 Print: 5F 3D 43 1E 24 1E CC 48 1E 05 93 3A A7 10 73 37 Beware of geeks baring gifs. -- Rishiyur S. Nikhil ([EMAIL PROTECTED]) on digital photography and see-through infrared cameras.
Aplixware and debian hamm/slink
I have been thinking of getting some sort of Office Suite for my own use at home...and have an early version of StarOffice 4 and have had mixed sucess with it (ok little to no success but...I could play with it more too...) Anyway... Has anyone here tried Applixware from RedHat? I understand its probably RPM'd et al...but with alien I could make it a tgz or a deb... I am runnign a hamm/slink system currently. I don't want to pay the $$ if it doesn't offer any signifigant advantages (tho if it does I am happy to buy a copy...afterall RedHat is an important COmpany in the Linux world...and im happy to see them make money) -Steve -- /* -- Stephen Carpenter [EMAIL PROTECTED] --- [EMAIL PROTECTED] */ E-mail Bumper Stickers: A FREE America or a Drug-Free America: You can't have both! honk if you Love Linux
Using 2.1.x kernels with hamm/slink
I have a mixed hamm/slink system which works fine with 2.0.35. I have tried running 2.1.112 and 2.1.114 and can't get pppd to start. Typing (as root) '/etc/init.d/ppp start' doesn't give any error message, but it doesn't run. Is there something different required for these newer kernels? Bob Bob Nielsen Internet: [EMAIL PROTECTED] Tucson, AZ AMPRnet: [EMAIL PROTECTED] DM42nh http://www.primenet.com/~nielsen -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
Re: Using 2.1.x kernels with hamm/slink
On Mon, Aug 03, 1998 at 10:39:10PM -0700, Bob Nielsen wrote: I have a mixed hamm/slink system which works fine with 2.0.35. I have tried running 2.1.112 and 2.1.114 and can't get pppd to start. Typing (as root) '/etc/init.d/ppp start' doesn't give any error message, but it doesn't run. Is there something different required for these newer kernels? Bob Read the Documentation/Changes file in the 2.1.114 source. Make sure you have upgraded everything. Also, turn on full debugging in your pppd options file(man pppd). If all else fails, recompile pppd 2.3.5 against 2.1.114 headers. -- -Josh Co-Admin of California.ZUH.net (Azog) ..and always remember...arf is god spelled funny. Never allow yourself to become too attached to someone, because they'll just rip your heart out and stomp it into the ground. -- Unsubscribe? mail -s unsubscribe [EMAIL PROTECTED] /dev/null
