[OT] Problemas com DMA e Kernel 2.4
Salve povo. Estou com o Debian Etch e Kernel 2.4.31, que compilei na mão. Meus discos estão dispostos da seguinte forma: Primary Master (hda): SAMSUNG SP4002H 40GiB UDMA 2 Secondary Master (hdb): Maxtor 2B020H1 20GiB UDMA 2 Primary Slave (hdc): QUANTUM FIREBALLlct20 30GiB UDMA 2 Secondary Slave (hdd): hdd: HL-DT-ST DVDRAM GSA-4163B UDMA 2 Durante o boot (e as vezes quando o computador está em funcionamento) eu recebo a seguinte mensagem: hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdc: dma_intr: error=0x84 { DriveStatusError BadCRC } hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdc: dma_intr: error=0x84 { DriveStatusError BadCRC } hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdc: dma_intr: error=0x84 { DriveStatusError BadCRC } hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdc: dma_intr: error=0x84 { DriveStatusError BadCRC } ide1: reset: success hdc: DMA disabled Quando deu essa mensagem da primeira vez, eu mudei o UDMA do hdc, que estava com 5, para 2. Achei que iria funcionar, mas continuou dando esse erro. Achei que poderia ser o flat cable, bem, troquei-o, mas não resolveu. Tudo funciona normalmente, o computador não trava, só que as vezes esse erro ocorre. Consigo gravar CDs e DVDs normalmente, sem nenhm problema. Qual será a razão desse erro? Será que o meu Quantum foi pro saco? Será o flat cable? Alguém já teve algum erro parecido? Agradeço qualquer colaboração e desde já me desculpo por ser OFF-TOPIC. Abraços, Gustavo PS. Segue o meu dmesg: Linux version 2.4.31 ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #5 Mon Jul 18 20:19:33 BRT 2005 BIOS-provided physical RAM map: BIOS-e820: - 0009fc00 (usable) BIOS-e820: 0009fc00 - 000a (reserved) BIOS-e820: 000f - 0010 (reserved) BIOS-e820: 0010 - 17ffc000 (usable) BIOS-e820: 17ffc000 - 17fff000 (ACPI data) BIOS-e820: 17fff000 - 1800 (ACPI NVS) BIOS-e820: fec0 - fec01000 (reserved) BIOS-e820: fee0 - fee01000 (reserved) BIOS-e820: - 0001 (reserved) 383MB LOWMEM available. On node 0 totalpages: 98300 zone(0): 4096 pages. zone(1): 94204 pages. zone(2): 0 pages. ACPI: RSDP (v000 ASUS ) @ 0x000f6810 ACPI: RSDT (v001 ASUS P4S333 0x42302e31 MSFT 0x31313031) @ 0x17ffc000 ACPI: FADT (v001 ASUS P4S333 0x42302e31 MSFT 0x31313031) @ 0x17ffc100 ACPI: BOOT (v001 ASUS P4S333 0x42302e31 MSFT 0x31313031) @ 0x17ffc040 ACPI: MADT (v001 ASUS P4S333 0x42302e31 MSFT 0x31313031) @ 0x17ffc080 ACPI: DSDT (v001 ASUS P4S333 0x1000 MSFT 0x010b) @ 0x Kernel command line: auto BOOT_IMAGE=Linux2431 ro root=301 hdd=ide-scsi ide_setup: hdd=ide-scsi Initializing CPU#0 Detected 1715.282 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3420.97 BogoMIPS Memory: 385888k/393200k available (1708k kernel code, 6924k reserved, 598k data, 96k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febfbff CPU: Common caps: 3febfbff CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: IRQ9 SCI: Level Trigger. POSIX conformance testing by UNIFIX ACPI: Subsystem revision 20040326 PCI: PCI BIOS revision 2.10 entry at 0xf1580, last bus=1 PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S4 S5) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] PCI: Probing PCI hardware ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
Re: [OT] Problemas com DMA e Kernel 2.4
Caro amigo ja verificou este hd em outro computador que tenha a mesma distro que o seu? Gian Nicodemus Técnico em hardware [EMAIL PROTECTED] http://gean.pruonckk.org Viva o Software LIVRE!! Salve povo. Estou com o Debian Etch e Kernel 2.4.31, que compilei na mão. Meus discos estão dispostos da seguinte forma: Primary Master (hda): SAMSUNG SP4002H 40GiB UDMA 2 Secondary Master (hdb): Maxtor 2B020H1 20GiB UDMA 2 Primary Slave (hdc): QUANTUM FIREBALLlct20 30GiB UDMA 2 Secondary Slave (hdd): hdd: HL-DT-ST DVDRAM GSA-4163B UDMA 2 Durante o boot (e as vezes quando o computador está em funcionamento) eu recebo a seguinte mensagem: hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdc: dma_intr: error=0x84 { DriveStatusError BadCRC } hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdc: dma_intr: error=0x84 { DriveStatusError BadCRC } hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdc: dma_intr: error=0x84 { DriveStatusError BadCRC } hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdc: dma_intr: error=0x84 { DriveStatusError BadCRC } ide1: reset: success hdc: DMA disabled Quando deu essa mensagem da primeira vez, eu mudei o UDMA do hdc, que estava com 5, para 2. Achei que iria funcionar, mas continuou dando esse erro. Achei que poderia ser o flat cable, bem, troquei-o, mas não resolveu. Tudo funciona normalmente, o computador não trava, só que as vezes esse erro ocorre. Consigo gravar CDs e DVDs normalmente, sem nenhm problema. Qual será a razão desse erro? Será que o meu Quantum foi pro saco? Será o flat cable? Alguém já teve algum erro parecido? Agradeço qualquer colaboração e desde já me desculpo por ser OFF-TOPIC. Abraços, Gustavo PS. Segue o meu dmesg: Linux version 2.4.31 ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #5 Mon Jul 18 20:19:33 BRT 2005 BIOS-provided physical RAM map: BIOS-e820: - 0009fc00 (usable) BIOS-e820: 0009fc00 - 000a (reserved) BIOS-e820: 000f - 0010 (reserved) BIOS-e820: 0010 - 17ffc000 (usable) BIOS-e820: 17ffc000 - 17fff000 (ACPI data) BIOS-e820: 17fff000 - 1800 (ACPI NVS) BIOS-e820: fec0 - fec01000 (reserved) BIOS-e820: fee0 - fee01000 (reserved) BIOS-e820: - 0001 (reserved) 383MB LOWMEM available. On node 0 totalpages: 98300 zone(0): 4096 pages. zone(1): 94204 pages. zone(2): 0 pages. ACPI: RSDP (v000 ASUS ) @ 0x000f6810 ACPI: RSDT (v001 ASUS P4S333 0x42302e31 MSFT 0x31313031) @ 0x17ffc000 ACPI: FADT (v001 ASUS P4S333 0x42302e31 MSFT 0x31313031) @ 0x17ffc100 ACPI: BOOT (v001 ASUS P4S333 0x42302e31 MSFT 0x31313031) @ 0x17ffc040 ACPI: MADT (v001 ASUS P4S333 0x42302e31 MSFT 0x31313031) @ 0x17ffc080 ACPI: DSDT (v001 ASUS P4S333 0x1000 MSFT 0x010b) @ 0x Kernel command line: auto BOOT_IMAGE=Linux2431 ro root=301 hdd=ide-scsi ide_setup: hdd=ide-scsi Initializing CPU#0 Detected 1715.282 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3420.97 BogoMIPS Memory: 385888k/393200k available (1708k kernel code, 6924k reserved, 598k data, 96k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febfbff CPU: Common caps: 3febfbff CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: IRQ9 SCI: Level Trigger. POSIX conformance testing by UNIFIX ACPI: Subsystem revision 20040326 PCI: PCI BIOS revision 2.10 entry at 0xf1580, last bus=1 PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S4 S5) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH]
Re: [OT] Problemas com DMA e Kernel 2.4
Isso e causado porque voce esta com o servico smartmontools, ou smartd desabilitado. smartctl -i /dev/hda Se aparecer como disable Voce tem duas opcoes, habilite o SMART no setup da sua maquina ou habilite o smartd no arquivo /etc/default/smartmontools As mensagens irao parar em seguida. Marcos --- Gian Nicodemus [EMAIL PROTECTED] escreveu: Caro amigo ja verificou este hd em outro computador que tenha a mesma distro que o seu? Gian Nicodemus Técnico em hardware [EMAIL PROTECTED] http://gean.pruonckk.org Viva o Software LIVRE!! Salve povo. Estou com o Debian Etch e Kernel 2.4.31, que compilei na mão. Meus discos estão dispostos da seguinte forma: Primary Master (hda): SAMSUNG SP4002H 40GiB UDMA 2 Secondary Master (hdb): Maxtor 2B020H1 20GiB UDMA 2 Primary Slave (hdc): QUANTUM FIREBALLlct20 30GiB UDMA 2 Secondary Slave (hdd): hdd: HL-DT-ST DVDRAM GSA-4163B UDMA 2 Durante o boot (e as vezes quando o computador está em funcionamento) eu recebo a seguinte mensagem: hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdc: dma_intr: error=0x84 { DriveStatusError BadCRC } hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdc: dma_intr: error=0x84 { DriveStatusError BadCRC } hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdc: dma_intr: error=0x84 { DriveStatusError BadCRC } hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdc: dma_intr: error=0x84 { DriveStatusError BadCRC } ide1: reset: success hdc: DMA disabled Quando deu essa mensagem da primeira vez, eu mudei o UDMA do hdc, que estava com 5, para 2. Achei que iria funcionar, mas continuou dando esse erro. Achei que poderia ser o flat cable, bem, troquei-o, mas não resolveu. Tudo funciona normalmente, o computador não trava, só que as vezes esse erro ocorre. Consigo gravar CDs e DVDs normalmente, sem nenhm problema. Qual será a razão desse erro? Será que o meu Quantum foi pro saco? Será o flat cable? Alguém já teve algum erro parecido? Agradeço qualquer colaboração e desde já me desculpo por ser OFF-TOPIC. Abraços, Gustavo PS. Segue o meu dmesg: Linux version 2.4.31 ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #5 Mon Jul 18 20:19:33 BRT 2005 BIOS-provided physical RAM map: BIOS-e820: - 0009fc00 (usable) BIOS-e820: 0009fc00 - 000a (reserved) BIOS-e820: 000f - 0010 (reserved) BIOS-e820: 0010 - 17ffc000 (usable) BIOS-e820: 17ffc000 - 17fff000 (ACPI data) BIOS-e820: 17fff000 - 1800 (ACPI NVS) BIOS-e820: fec0 - fec01000 (reserved) BIOS-e820: fee0 - fee01000 (reserved) BIOS-e820: - 0001 (reserved) 383MB LOWMEM available. On node 0 totalpages: 98300 zone(0): 4096 pages. zone(1): 94204 pages. zone(2): 0 pages. ACPI: RSDP (v000 ASUS ) @ 0x000f6810 ACPI: RSDT (v001 ASUS P4S333 0x42302e31 MSFT 0x31313031) @ 0x17ffc000 ACPI: FADT (v001 ASUS P4S333 0x42302e31 MSFT 0x31313031) @ 0x17ffc100 ACPI: BOOT (v001 ASUS P4S333 0x42302e31 MSFT 0x31313031) @ 0x17ffc040 ACPI: MADT (v001 ASUS P4S333 0x42302e31 MSFT 0x31313031) @ 0x17ffc080 ACPI: DSDT (v001 ASUS P4S333 0x1000 MSFT 0x010b) @ 0x Kernel command line: auto BOOT_IMAGE=Linux2431 ro root=301 hdd=ide-scsi ide_setup: hdd=ide-scsi Initializing CPU#0 Detected 1715.282 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3420.97 BogoMIPS Memory: 385888k/393200k available (1708k kernel code, 6924k reserved, 598k data, 96k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febfbff CPU: Common caps: 3febfbff CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: IRQ9 SCI: Level Trigger. POSIX conformance testing by UNIFIX ACPI: Subsystem revision 20040326 PCI: PCI BIOS revision 2.10 entry at 0xf1580, last bus=1 PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S4 S5) ACPI: PCI Interrupt Link
Re: [OT] Problemas com DMA e Kernel 2.4
Mesmo habilitando o smartd as mensagens não pararam. Vou comprar ou flat cable, talvez seja isso. Valeu pelas repostas, Gustavo On 7/22/05, Marcos Aurelio Rodrigues [EMAIL PROTECTED] wrote: Isso e causado porque voce esta com o servico smartmontools, ou smartd desabilitado. smartctl -i /dev/hda Se aparecer como disable Voce tem duas opcoes, habilite o SMART no setup da sua maquina ou habilite o smartd no arquivo /etc/default/smartmontools As mensagens irao parar em seguida. Marcos --- Gian Nicodemus [EMAIL PROTECTED] escreveu: Caro amigo ja verificou este hd em outro computador que tenha a mesma distro que o seu? Gian Nicodemus Técnico em hardware [EMAIL PROTECTED] http://gean.pruonckk.org Viva o Software LIVRE!! Salve povo. Estou com o Debian Etch e Kernel 2.4.31, que compilei na mão. Meus discos estão dispostos da seguinte forma: Primary Master (hda): SAMSUNG SP4002H 40GiB UDMA 2 Secondary Master (hdb): Maxtor 2B020H1 20GiB UDMA 2 Primary Slave (hdc): QUANTUM FIREBALLlct20 30GiB UDMA 2 Secondary Slave (hdd): hdd: HL-DT-ST DVDRAM GSA-4163B UDMA 2 Durante o boot (e as vezes quando o computador está em funcionamento) eu recebo a seguinte mensagem: hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdc: dma_intr: error=0x84 { DriveStatusError BadCRC } hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdc: dma_intr: error=0x84 { DriveStatusError BadCRC } hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdc: dma_intr: error=0x84 { DriveStatusError BadCRC } hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdc: dma_intr: error=0x84 { DriveStatusError BadCRC } ide1: reset: success hdc: DMA disabled Quando deu essa mensagem da primeira vez, eu mudei o UDMA do hdc, que estava com 5, para 2. Achei que iria funcionar, mas continuou dando esse erro. Achei que poderia ser o flat cable, bem, troquei-o, mas não resolveu. Tudo funciona normalmente, o computador não trava, só que as vezes esse erro ocorre. Consigo gravar CDs e DVDs normalmente, sem nenhm problema. Qual será a razão desse erro? Será que o meu Quantum foi pro saco? Será o flat cable? Alguém já teve algum erro parecido? Agradeço qualquer colaboração e desde já me desculpo por ser OFF-TOPIC. Abraços, Gustavo PS. Segue o meu dmesg: Linux version 2.4.31 ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #5 Mon Jul 18 20:19:33 BRT 2005 BIOS-provided physical RAM map: BIOS-e820: - 0009fc00 (usable) BIOS-e820: 0009fc00 - 000a (reserved) BIOS-e820: 000f - 0010 (reserved) BIOS-e820: 0010 - 17ffc000 (usable) BIOS-e820: 17ffc000 - 17fff000 (ACPI data) BIOS-e820: 17fff000 - 1800 (ACPI NVS) BIOS-e820: fec0 - fec01000 (reserved) BIOS-e820: fee0 - fee01000 (reserved) BIOS-e820: - 0001 (reserved) 383MB LOWMEM available. On node 0 totalpages: 98300 zone(0): 4096 pages. zone(1): 94204 pages. zone(2): 0 pages. ACPI: RSDP (v000 ASUS ) @ 0x000f6810 ACPI: RSDT (v001 ASUS P4S333 0x42302e31 MSFT 0x31313031) @ 0x17ffc000 ACPI: FADT (v001 ASUS P4S333 0x42302e31 MSFT 0x31313031) @ 0x17ffc100 ACPI: BOOT (v001 ASUS P4S333 0x42302e31 MSFT 0x31313031) @ 0x17ffc040 ACPI: MADT (v001 ASUS P4S333 0x42302e31 MSFT 0x31313031) @ 0x17ffc080 ACPI: DSDT (v001 ASUS P4S333 0x1000 MSFT 0x010b) @ 0x Kernel command line: auto BOOT_IMAGE=Linux2431 ro root=301 hdd=ide-scsi ide_setup: hdd=ide-scsi Initializing CPU#0 Detected 1715.282 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3420.97 BogoMIPS Memory: 385888k/393200k available (1708k kernel code, 6924k reserved, 598k data, 96k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febfbff CPU: Common caps: 3febfbff CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: IRQ9 SCI: Level