Re: Máquina não desliga sozinha com kernel 2.6.37
É, desde que apliquei os patches de correções, não tive mais problemas. Verifiquei que tinha alguns problemas relacionados com alguns módulos de placas Intel, como i915 e snd_hda_intel nos changelogs. Provavelmente foi algum módulo que causou o problema. Valeu a força! On Fri, 18 Feb 2011 21:47:22 -0400 Rodolfo rof20...@gmail.com wrote: Beleza =D Em 18 de fevereiro de 2011 20:54, André Luiz Fraga Moreira andre4deb...@gmail.com escreveu: Opa Hoje eu atualizei o kernel para a versão 2.6.37.1, pois saiu o primeiro patch de correções. Dei uma olhada rápida no changelog e não encontrei nenhum problema referente ao que estou tendo. Vou ver se o problema foi resolvido e se voltar a ocorrer, aplico a alteração que vc sugeriu. Valeu a força! Abraço On Fri, 18 Feb 2011 14:55:41 -0400 Rodolfo rof20...@gmail.com wrote: Vamo tentar.. no arquivo /etc/init.d/halt (como root) e coloca assim NO INICIO do arquivo: rmmod snd_hda_intel Da retorno. Em 18 de fevereiro de 2011 00:17, André Luiz Fraga Moreira andre4deb...@gmail.com escreveu: # lsmod | grep snd_hda_intel snd_hda_intel 18596 4 snd_hda_codec 52214 3 snd_hda_codec_idt,snd_hda_codec_hdmi,snd_hda_intel snd_pcm60511 3 snd_hda_intel,snd_hda_codec snd46670 14 snd_hda_codec_idt,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device snd_page_alloc 6081 2 snd_hda_intel,snd_pcm É, eu tenho o módulo ativo. Mas será que é por causa desse módulo? Porque o problema só ocorre no kernel 2.6.37 e desde o 2.6.33 a máquina nunca tinha congelado no desligamento mesmo com o módulo ativo. Abraço On Thu, 17 Feb 2011 21:56:13 -0400 Rodolfo rof20...@gmail.com wrote: SO mais um pedido, digite como root: lsmod | grep snd_hda_intel quero saber se você usa esse modulo como driver de som. Algumas pessoas tem este tipo de problema ao usar o módulo acima citado. Abraços Em 17 de fevereiro de 2011 21:43, André Luiz Fraga Moreira andre4deb...@gmail.com escreveu: # dmesg | grep acpi [0.00] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [0.00] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [0.00] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [0.00] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [2.950953] ACPI: acpi_idle registered with cpuidle [ 26.675955] acpi device:30: registered as cooling_device2 Estou mandando também a saída usando a opção -i do grep, para mostrar mais saídas referentes a acpi tanto em letras maiúsculas quanto em minúsculas de forma a ficar mais detalhado. # dmesg | grep -i acpi [0.00] ACPI: RSDP 000fbc60 00024 (v02 DELL ) [0.00] ACPI: XSDT bf66f200 00064 (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: FACP bf66f09c 000F4 (v04 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: DSDT bf66f800 05477 (v02 INT430 SYSFexxx 1001 INTL 20050624) [0.00] ACPI: FACS bf67e000 00040 [0.00] ACPI: HPET bf66f300 00038 (v01 DELLM08 0001 ASL 0061) [0.00] ACPI: APIC bf66f400 00068 (v01 DELLM08 27D80A10 ASL 0047) [0.00] ACPI: MCFG bf66f3c0 0003E (v16 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: SLIC bf66f49c 00176 (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: OSFR bf66ea00 0002C (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: BOOT bf66efc0 00028 (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: SSDT bf66da44 004CC (v01 PmRef CpuPm 3000 INTL 20050624) [0.00] ACPI: Local APIC address 0xfee0 [0.00] ACPI: PM-Timer IO Port: 0x1008 [0.00] ACPI: Local APIC address 0xfee0 [0.00] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [0.00] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [0.00] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [0.00] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [0.00] ACPI: IOAPIC (id[0x02] address[0xfec0] gsi_base[0]) [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [0.00] ACPI: IRQ0 used by override. [0.00] ACPI: IRQ2 used by override. [0.00] ACPI: IRQ9 used by override. [0.00] Using ACPI (MADT) for SMP
Re: Máquina não desliga sozinha com kernel 2.6.37
Entãocomo eu desconfiava, algum problema com módulos intelparabéns e boa sorte =D Em 13 de março de 2011 19:23, André Luiz Fraga Moreira andre4deb...@gmail.com escreveu: É, desde que apliquei os patches de correções, não tive mais problemas. Verifiquei que tinha alguns problemas relacionados com alguns módulos de placas Intel, como i915 e snd_hda_intel nos changelogs. Provavelmente foi algum módulo que causou o problema. Valeu a força! On Fri, 18 Feb 2011 21:47:22 -0400 Rodolfo rof20...@gmail.com wrote: Beleza =D Em 18 de fevereiro de 2011 20:54, André Luiz Fraga Moreira andre4deb...@gmail.com escreveu: Opa Hoje eu atualizei o kernel para a versão 2.6.37.1, pois saiu o primeiro patch de correções. Dei uma olhada rápida no changelog e não encontrei nenhum problema referente ao que estou tendo. Vou ver se o problema foi resolvido e se voltar a ocorrer, aplico a alteração que vc sugeriu. Valeu a força! Abraço On Fri, 18 Feb 2011 14:55:41 -0400 Rodolfo rof20...@gmail.com wrote: Vamo tentar.. no arquivo /etc/init.d/halt (como root) e coloca assim NO INICIO do arquivo: rmmod snd_hda_intel Da retorno. Em 18 de fevereiro de 2011 00:17, André Luiz Fraga Moreira andre4deb...@gmail.com escreveu: # lsmod | grep snd_hda_intel snd_hda_intel 18596 4 snd_hda_codec 52214 3 snd_hda_codec_idt,snd_hda_codec_hdmi,snd_hda_intel snd_pcm60511 3 snd_hda_intel,snd_hda_codec snd46670 14 snd_hda_codec_idt,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device snd_page_alloc 6081 2 snd_hda_intel,snd_pcm É, eu tenho o módulo ativo. Mas será que é por causa desse módulo? Porque o problema só ocorre no kernel 2.6.37 e desde o 2.6.33 a máquina nunca tinha congelado no desligamento mesmo com o módulo ativo. Abraço On Thu, 17 Feb 2011 21:56:13 -0400 Rodolfo rof20...@gmail.com wrote: SO mais um pedido, digite como root: lsmod | grep snd_hda_intel quero saber se você usa esse modulo como driver de som. Algumas pessoas tem este tipo de problema ao usar o módulo acima citado. Abraços Em 17 de fevereiro de 2011 21:43, André Luiz Fraga Moreira andre4deb...@gmail.com escreveu: # dmesg | grep acpi [0.00] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [0.00] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [0.00] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [0.00] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [2.950953] ACPI: acpi_idle registered with cpuidle [ 26.675955] acpi device:30: registered as cooling_device2 Estou mandando também a saída usando a opção -i do grep, para mostrar mais saídas referentes a acpi tanto em letras maiúsculas quanto em minúsculas de forma a ficar mais detalhado. # dmesg | grep -i acpi [0.00] ACPI: RSDP 000fbc60 00024 (v02 DELL ) [0.00] ACPI: XSDT bf66f200 00064 (v01 DELL M08 27D80A10 ASL 0061) [0.00] ACPI: FACP bf66f09c 000F4 (v04 DELL M08 27D80A10 ASL 0061) [0.00] ACPI: DSDT bf66f800 05477 (v02 INT430 SYSFexxx 1001 INTL 20050624) [0.00] ACPI: FACS bf67e000 00040 [0.00] ACPI: HPET bf66f300 00038 (v01 DELL M08 0001 ASL 0061) [0.00] ACPI: APIC bf66f400 00068 (v01 DELL M08 27D80A10 ASL 0047) [0.00] ACPI: MCFG bf66f3c0 0003E (v16 DELL M08 27D80A10 ASL 0061) [0.00] ACPI: SLIC bf66f49c 00176 (v01 DELL M08 27D80A10 ASL 0061) [0.00] ACPI: OSFR bf66ea00 0002C (v01 DELL M08 27D80A10 ASL 0061) [0.00] ACPI: BOOT bf66efc0 00028 (v01 DELL M08 27D80A10 ASL 0061) [0.00] ACPI: SSDT bf66da44 004CC (v01 PmRef CpuPm 3000 INTL 20050624) [0.00] ACPI: Local APIC address 0xfee0 [0.00] ACPI: PM-Timer IO Port: 0x1008 [0.00] ACPI: Local APIC address 0xfee0 [0.00] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [0.00] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [0.00] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [0.00] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [0.00] ACPI: IOAPIC (id[0x02] address[0xfec0] gsi_base[0]) [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 0
Re: Máquina não desliga sozinha com kernel 2.6.37
Vamo tentar.. no arquivo /etc/init.d/halt (como root) e coloca assim NO INICIO do arquivo: rmmod snd_hda_intel Da retorno. Em 18 de fevereiro de 2011 00:17, André Luiz Fraga Moreira andre4deb...@gmail.com escreveu: # lsmod | grep snd_hda_intel snd_hda_intel 18596 4 snd_hda_codec 52214 3 snd_hda_codec_idt,snd_hda_codec_hdmi,snd_hda_intel snd_pcm60511 3 snd_hda_intel,snd_hda_codec snd46670 14 snd_hda_codec_idt,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device snd_page_alloc 6081 2 snd_hda_intel,snd_pcm É, eu tenho o módulo ativo. Mas será que é por causa desse módulo? Porque o problema só ocorre no kernel 2.6.37 e desde o 2.6.33 a máquina nunca tinha congelado no desligamento mesmo com o módulo ativo. Abraço On Thu, 17 Feb 2011 21:56:13 -0400 Rodolfo rof20...@gmail.com wrote: SO mais um pedido, digite como root: lsmod | grep snd_hda_intel quero saber se você usa esse modulo como driver de som. Algumas pessoas tem este tipo de problema ao usar o módulo acima citado. Abraços Em 17 de fevereiro de 2011 21:43, André Luiz Fraga Moreira andre4deb...@gmail.com escreveu: # dmesg | grep acpi [0.00] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [0.00] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [0.00] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [0.00] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [2.950953] ACPI: acpi_idle registered with cpuidle [ 26.675955] acpi device:30: registered as cooling_device2 Estou mandando também a saída usando a opção -i do grep, para mostrar mais saídas referentes a acpi tanto em letras maiúsculas quanto em minúsculas de forma a ficar mais detalhado. # dmesg | grep -i acpi [0.00] ACPI: RSDP 000fbc60 00024 (v02 DELL ) [0.00] ACPI: XSDT bf66f200 00064 (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: FACP bf66f09c 000F4 (v04 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: DSDT bf66f800 05477 (v02 INT430 SYSFexxx 1001 INTL 20050624) [0.00] ACPI: FACS bf67e000 00040 [0.00] ACPI: HPET bf66f300 00038 (v01 DELLM08 0001 ASL 0061) [0.00] ACPI: APIC bf66f400 00068 (v01 DELLM08 27D80A10 ASL 0047) [0.00] ACPI: MCFG bf66f3c0 0003E (v16 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: SLIC bf66f49c 00176 (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: OSFR bf66ea00 0002C (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: BOOT bf66efc0 00028 (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: SSDT bf66da44 004CC (v01 PmRefCpuPm 3000 INTL 20050624) [0.00] ACPI: Local APIC address 0xfee0 [0.00] ACPI: PM-Timer IO Port: 0x1008 [0.00] ACPI: Local APIC address 0xfee0 [0.00] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [0.00] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [0.00] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [0.00] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [0.00] ACPI: IOAPIC (id[0x02] address[0xfec0] gsi_base[0]) [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [0.00] ACPI: IRQ0 used by override. [0.00] ACPI: IRQ2 used by override. [0.00] ACPI: IRQ9 used by override. [0.00] Using ACPI (MADT) for SMP configuration information [0.00] ACPI: HPET id: 0x8086a201 base: 0xfed0 [0.008585] ACPI: Core revision 20101013 [0.148662] ACPI: bus type pci registered [0.153294] ACPI: EC: Look up EC in DSDT [0.166448] ACPI: SSDT bf66e57a 00202 (v01 PmRef Cpu0Ist 3000 INTL 20050624) [0.166832] ACPI: Dynamic OEM Table Load: [0.166974] ACPI: SSDT (null) 00202 (v01 PmRef Cpu0Ist 3000 INTL 20050624) [0.167407] ACPI: SSDT bf66df10 005E5 (v01 PmRef Cpu0Cst 3001 INTL 20050624) [0.167778] ACPI: Dynamic OEM Table Load: [0.167920] ACPI: SSDT (null) 005E5 (v01 PmRef Cpu0Cst 3001 INTL 20050624) [0.168374] ACPI: SSDT bf66e77c 000C4 (v01 PmRef Cpu1Ist 3000 INTL 20050624) [0.168748] ACPI: Dynamic OEM Table Load: [0.168890] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 3000 INTL 20050624) [0.169170] ACPI: SSDT bf66e4f5 00085 (v01 PmRef Cpu1Cst 3000 INTL 20050624) [0.169535] ACPI: Dynamic OEM Table Load: [0.169677] ACPI: SSDT (null)
Re: Máquina não desliga sozinha com kernel 2.6.37
Opa Hoje eu atualizei o kernel para a versão 2.6.37.1, pois saiu o primeiro patch de correções. Dei uma olhada rápida no changelog e não encontrei nenhum problema referente ao que estou tendo. Vou ver se o problema foi resolvido e se voltar a ocorrer, aplico a alteração que vc sugeriu. Valeu a força! Abraço On Fri, 18 Feb 2011 14:55:41 -0400 Rodolfo rof20...@gmail.com wrote: Vamo tentar.. no arquivo /etc/init.d/halt (como root) e coloca assim NO INICIO do arquivo: rmmod snd_hda_intel Da retorno. Em 18 de fevereiro de 2011 00:17, André Luiz Fraga Moreira andre4deb...@gmail.com escreveu: # lsmod | grep snd_hda_intel snd_hda_intel 18596 4 snd_hda_codec 52214 3 snd_hda_codec_idt,snd_hda_codec_hdmi,snd_hda_intel snd_pcm60511 3 snd_hda_intel,snd_hda_codec snd46670 14 snd_hda_codec_idt,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device snd_page_alloc 6081 2 snd_hda_intel,snd_pcm É, eu tenho o módulo ativo. Mas será que é por causa desse módulo? Porque o problema só ocorre no kernel 2.6.37 e desde o 2.6.33 a máquina nunca tinha congelado no desligamento mesmo com o módulo ativo. Abraço On Thu, 17 Feb 2011 21:56:13 -0400 Rodolfo rof20...@gmail.com wrote: SO mais um pedido, digite como root: lsmod | grep snd_hda_intel quero saber se você usa esse modulo como driver de som. Algumas pessoas tem este tipo de problema ao usar o módulo acima citado. Abraços Em 17 de fevereiro de 2011 21:43, André Luiz Fraga Moreira andre4deb...@gmail.com escreveu: # dmesg | grep acpi [0.00] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [0.00] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [0.00] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [0.00] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [2.950953] ACPI: acpi_idle registered with cpuidle [ 26.675955] acpi device:30: registered as cooling_device2 Estou mandando também a saída usando a opção -i do grep, para mostrar mais saídas referentes a acpi tanto em letras maiúsculas quanto em minúsculas de forma a ficar mais detalhado. # dmesg | grep -i acpi [0.00] ACPI: RSDP 000fbc60 00024 (v02 DELL ) [0.00] ACPI: XSDT bf66f200 00064 (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: FACP bf66f09c 000F4 (v04 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: DSDT bf66f800 05477 (v02 INT430 SYSFexxx 1001 INTL 20050624) [0.00] ACPI: FACS bf67e000 00040 [0.00] ACPI: HPET bf66f300 00038 (v01 DELLM08 0001 ASL 0061) [0.00] ACPI: APIC bf66f400 00068 (v01 DELLM08 27D80A10 ASL 0047) [0.00] ACPI: MCFG bf66f3c0 0003E (v16 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: SLIC bf66f49c 00176 (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: OSFR bf66ea00 0002C (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: BOOT bf66efc0 00028 (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: SSDT bf66da44 004CC (v01 PmRefCpuPm 3000 INTL 20050624) [0.00] ACPI: Local APIC address 0xfee0 [0.00] ACPI: PM-Timer IO Port: 0x1008 [0.00] ACPI: Local APIC address 0xfee0 [0.00] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [0.00] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [0.00] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [0.00] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [0.00] ACPI: IOAPIC (id[0x02] address[0xfec0] gsi_base[0]) [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [0.00] ACPI: IRQ0 used by override. [0.00] ACPI: IRQ2 used by override. [0.00] ACPI: IRQ9 used by override. [0.00] Using ACPI (MADT) for SMP configuration information [0.00] ACPI: HPET id: 0x8086a201 base: 0xfed0 [0.008585] ACPI: Core revision 20101013 [0.148662] ACPI: bus type pci registered [0.153294] ACPI: EC: Look up EC in DSDT [0.166448] ACPI: SSDT bf66e57a 00202 (v01 PmRef Cpu0Ist 3000 INTL 20050624) [0.166832] ACPI: Dynamic OEM Table Load: [0.166974] ACPI: SSDT (null) 00202 (v01 PmRef Cpu0Ist 3000 INTL 20050624) [0.167407] ACPI: SSDT bf66df10 005E5 (v01 PmRef Cpu0Cst 3001 INTL 20050624) [0.167778] ACPI: Dynamic OEM Table Load: [0.167920] ACPI: SSDT (null)
Re: Máquina não desliga sozinha com kernel 2.6.37
Beleza =D Em 18 de fevereiro de 2011 20:54, André Luiz Fraga Moreira andre4deb...@gmail.com escreveu: Opa Hoje eu atualizei o kernel para a versão 2.6.37.1, pois saiu o primeiro patch de correções. Dei uma olhada rápida no changelog e não encontrei nenhum problema referente ao que estou tendo. Vou ver se o problema foi resolvido e se voltar a ocorrer, aplico a alteração que vc sugeriu. Valeu a força! Abraço On Fri, 18 Feb 2011 14:55:41 -0400 Rodolfo rof20...@gmail.com wrote: Vamo tentar.. no arquivo /etc/init.d/halt (como root) e coloca assim NO INICIO do arquivo: rmmod snd_hda_intel Da retorno. Em 18 de fevereiro de 2011 00:17, André Luiz Fraga Moreira andre4deb...@gmail.com escreveu: # lsmod | grep snd_hda_intel snd_hda_intel 18596 4 snd_hda_codec 52214 3 snd_hda_codec_idt,snd_hda_codec_hdmi,snd_hda_intel snd_pcm60511 3 snd_hda_intel,snd_hda_codec snd46670 14 snd_hda_codec_idt,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device snd_page_alloc 6081 2 snd_hda_intel,snd_pcm É, eu tenho o módulo ativo. Mas será que é por causa desse módulo? Porque o problema só ocorre no kernel 2.6.37 e desde o 2.6.33 a máquina nunca tinha congelado no desligamento mesmo com o módulo ativo. Abraço On Thu, 17 Feb 2011 21:56:13 -0400 Rodolfo rof20...@gmail.com wrote: SO mais um pedido, digite como root: lsmod | grep snd_hda_intel quero saber se você usa esse modulo como driver de som. Algumas pessoas tem este tipo de problema ao usar o módulo acima citado. Abraços Em 17 de fevereiro de 2011 21:43, André Luiz Fraga Moreira andre4deb...@gmail.com escreveu: # dmesg | grep acpi [0.00] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [0.00] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [0.00] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [0.00] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [2.950953] ACPI: acpi_idle registered with cpuidle [ 26.675955] acpi device:30: registered as cooling_device2 Estou mandando também a saída usando a opção -i do grep, para mostrar mais saídas referentes a acpi tanto em letras maiúsculas quanto em minúsculas de forma a ficar mais detalhado. # dmesg | grep -i acpi [0.00] ACPI: RSDP 000fbc60 00024 (v02 DELL ) [0.00] ACPI: XSDT bf66f200 00064 (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: FACP bf66f09c 000F4 (v04 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: DSDT bf66f800 05477 (v02 INT430 SYSFexxx 1001 INTL 20050624) [0.00] ACPI: FACS bf67e000 00040 [0.00] ACPI: HPET bf66f300 00038 (v01 DELLM08 0001 ASL 0061) [0.00] ACPI: APIC bf66f400 00068 (v01 DELLM08 27D80A10 ASL 0047) [0.00] ACPI: MCFG bf66f3c0 0003E (v16 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: SLIC bf66f49c 00176 (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: OSFR bf66ea00 0002C (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: BOOT bf66efc0 00028 (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: SSDT bf66da44 004CC (v01 PmRef CpuPm 3000 INTL 20050624) [0.00] ACPI: Local APIC address 0xfee0 [0.00] ACPI: PM-Timer IO Port: 0x1008 [0.00] ACPI: Local APIC address 0xfee0 [0.00] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [0.00] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [0.00] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [0.00] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [0.00] ACPI: IOAPIC (id[0x02] address[0xfec0] gsi_base[0]) [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [0.00] ACPI: IRQ0 used by override. [0.00] ACPI: IRQ2 used by override. [0.00] ACPI: IRQ9 used by override. [0.00] Using ACPI (MADT) for SMP configuration information [0.00] ACPI: HPET id: 0x8086a201 base: 0xfed0 [0.008585] ACPI: Core revision 20101013 [0.148662] ACPI: bus type pci registered [0.153294] ACPI: EC: Look up EC in DSDT [0.166448] ACPI: SSDT bf66e57a 00202 (v01 PmRef Cpu0Ist 3000 INTL 20050624) [0.166832] ACPI: Dynamic OEM Table Load: [0.166974] ACPI: SSDT (null) 00202 (v01 PmRef Cpu0Ist
Re: Máquina não desliga sozinha com kernel 2.6.37
digita dmesg | grep acpi e informe-nos a saida desse comando.. Ah...digite como root Em 16 de fevereiro de 2011 22:35, André Luiz Fraga Moreira andre4deb...@gmail.com escreveu: Boa noite, amigos da lista Estou com o seguinte problema: Depois que compilei e instalei o kernel 2.6.37 no meu Debian, às vezes meu notebook trava durante o desligamento. O reboot é sempre normal, mas o desligamento de vez em quando agarra, ficando parado em uma mensagem Disabling non-boot CPUs. Cheguei a suspeitar que era o BLK (Big Kernel Lock) que estava causando o problema, mas mesmo após desabilitá-lo, o erro ocorria. Pesquisando na Internet, vi que poderia ser problema na BIOS da máquina, mas fiz testes usando o kernel anterior (2.6.36.2) e não ocorreram problemas durante o desligamento, o que me fez suspeitar do kernel 2.6.37. Alguém sabe se é algum bug no kernel 2.6.37 ou algo do tipo que esteja causando isso? O estranho é que o problema não ocorre toda vez que eu desligo a máquina, só de vez em quando. Meu notebook é um Dell Inspiron 1525. Agradeço qualquer ajuda, valeu! -- André Luiz Fraga Moreira andre4deb...@gmail.com Matriculado no curso de Tecnologia em Redes de Computadores Linux Professional Institute Certified - LPIC 1 Debian user - www.debian.org twitter e identi.ca: @andreluizfm
Re: Máquina não desliga sozinha com kernel 2.6.37
# dmesg | grep acpi [0.00] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [0.00] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [0.00] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [0.00] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [2.950953] ACPI: acpi_idle registered with cpuidle [ 26.675955] acpi device:30: registered as cooling_device2 Estou mandando também a saída usando a opção -i do grep, para mostrar mais saídas referentes a acpi tanto em letras maiúsculas quanto em minúsculas de forma a ficar mais detalhado. # dmesg | grep -i acpi [0.00] ACPI: RSDP 000fbc60 00024 (v02 DELL ) [0.00] ACPI: XSDT bf66f200 00064 (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: FACP bf66f09c 000F4 (v04 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: DSDT bf66f800 05477 (v02 INT430 SYSFexxx 1001 INTL 20050624) [0.00] ACPI: FACS bf67e000 00040 [0.00] ACPI: HPET bf66f300 00038 (v01 DELLM08 0001 ASL 0061) [0.00] ACPI: APIC bf66f400 00068 (v01 DELLM08 27D80A10 ASL 0047) [0.00] ACPI: MCFG bf66f3c0 0003E (v16 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: SLIC bf66f49c 00176 (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: OSFR bf66ea00 0002C (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: BOOT bf66efc0 00028 (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: SSDT bf66da44 004CC (v01 PmRefCpuPm 3000 INTL 20050624) [0.00] ACPI: Local APIC address 0xfee0 [0.00] ACPI: PM-Timer IO Port: 0x1008 [0.00] ACPI: Local APIC address 0xfee0 [0.00] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [0.00] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [0.00] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [0.00] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [0.00] ACPI: IOAPIC (id[0x02] address[0xfec0] gsi_base[0]) [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [0.00] ACPI: IRQ0 used by override. [0.00] ACPI: IRQ2 used by override. [0.00] ACPI: IRQ9 used by override. [0.00] Using ACPI (MADT) for SMP configuration information [0.00] ACPI: HPET id: 0x8086a201 base: 0xfed0 [0.008585] ACPI: Core revision 20101013 [0.148662] ACPI: bus type pci registered [0.153294] ACPI: EC: Look up EC in DSDT [0.166448] ACPI: SSDT bf66e57a 00202 (v01 PmRef Cpu0Ist 3000 INTL 20050624) [0.166832] ACPI: Dynamic OEM Table Load: [0.166974] ACPI: SSDT (null) 00202 (v01 PmRef Cpu0Ist 3000 INTL 20050624) [0.167407] ACPI: SSDT bf66df10 005E5 (v01 PmRef Cpu0Cst 3001 INTL 20050624) [0.167778] ACPI: Dynamic OEM Table Load: [0.167920] ACPI: SSDT (null) 005E5 (v01 PmRef Cpu0Cst 3001 INTL 20050624) [0.168374] ACPI: SSDT bf66e77c 000C4 (v01 PmRef Cpu1Ist 3000 INTL 20050624) [0.168748] ACPI: Dynamic OEM Table Load: [0.168890] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 3000 INTL 20050624) [0.169170] ACPI: SSDT bf66e4f5 00085 (v01 PmRef Cpu1Cst 3000 INTL 20050624) [0.169535] ACPI: Dynamic OEM Table Load: [0.169677] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 3000 INTL 20050624) [0.170011] ACPI: Interpreter enabled [0.170069] ACPI: (supports S0 S3 S4 S5) [0.170309] ACPI: Using IOAPIC for interrupt routing [0.205488] PCI: Using host bridge windows from ACPI; if necessary, use pci=nocrs and report a bug [0.218138] ACPI: PCI Root Bridge [PCI0] (domain [bus 00-ff]) [0.245781] pci :00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [0.255791] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [0.256056] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [0.256161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [0.256215] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [0.256272] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [0.266097] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [0.266450] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [0.266800] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5 [0.267182] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, disabled. [0.267702] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [0.268398] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [0.269097] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15) [0.269782] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0,
Re: Máquina não desliga sozinha com kernel 2.6.37
SO mais um pedido, digite como root: lsmod | grep snd_hda_intel quero saber se você usa esse modulo como driver de som. Algumas pessoas tem este tipo de problema ao usar o módulo acima citado. Abraços Em 17 de fevereiro de 2011 21:43, André Luiz Fraga Moreira andre4deb...@gmail.com escreveu: # dmesg | grep acpi [0.00] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [0.00] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [0.00] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [0.00] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [2.950953] ACPI: acpi_idle registered with cpuidle [ 26.675955] acpi device:30: registered as cooling_device2 Estou mandando também a saída usando a opção -i do grep, para mostrar mais saídas referentes a acpi tanto em letras maiúsculas quanto em minúsculas de forma a ficar mais detalhado. # dmesg | grep -i acpi [0.00] ACPI: RSDP 000fbc60 00024 (v02 DELL ) [0.00] ACPI: XSDT bf66f200 00064 (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: FACP bf66f09c 000F4 (v04 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: DSDT bf66f800 05477 (v02 INT430 SYSFexxx 1001 INTL 20050624) [0.00] ACPI: FACS bf67e000 00040 [0.00] ACPI: HPET bf66f300 00038 (v01 DELLM08 0001 ASL 0061) [0.00] ACPI: APIC bf66f400 00068 (v01 DELLM08 27D80A10 ASL 0047) [0.00] ACPI: MCFG bf66f3c0 0003E (v16 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: SLIC bf66f49c 00176 (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: OSFR bf66ea00 0002C (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: BOOT bf66efc0 00028 (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: SSDT bf66da44 004CC (v01 PmRefCpuPm 3000 INTL 20050624) [0.00] ACPI: Local APIC address 0xfee0 [0.00] ACPI: PM-Timer IO Port: 0x1008 [0.00] ACPI: Local APIC address 0xfee0 [0.00] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [0.00] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [0.00] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [0.00] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [0.00] ACPI: IOAPIC (id[0x02] address[0xfec0] gsi_base[0]) [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [0.00] ACPI: IRQ0 used by override. [0.00] ACPI: IRQ2 used by override. [0.00] ACPI: IRQ9 used by override. [0.00] Using ACPI (MADT) for SMP configuration information [0.00] ACPI: HPET id: 0x8086a201 base: 0xfed0 [0.008585] ACPI: Core revision 20101013 [0.148662] ACPI: bus type pci registered [0.153294] ACPI: EC: Look up EC in DSDT [0.166448] ACPI: SSDT bf66e57a 00202 (v01 PmRef Cpu0Ist 3000 INTL 20050624) [0.166832] ACPI: Dynamic OEM Table Load: [0.166974] ACPI: SSDT (null) 00202 (v01 PmRef Cpu0Ist 3000 INTL 20050624) [0.167407] ACPI: SSDT bf66df10 005E5 (v01 PmRef Cpu0Cst 3001 INTL 20050624) [0.167778] ACPI: Dynamic OEM Table Load: [0.167920] ACPI: SSDT (null) 005E5 (v01 PmRef Cpu0Cst 3001 INTL 20050624) [0.168374] ACPI: SSDT bf66e77c 000C4 (v01 PmRef Cpu1Ist 3000 INTL 20050624) [0.168748] ACPI: Dynamic OEM Table Load: [0.168890] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 3000 INTL 20050624) [0.169170] ACPI: SSDT bf66e4f5 00085 (v01 PmRef Cpu1Cst 3000 INTL 20050624) [0.169535] ACPI: Dynamic OEM Table Load: [0.169677] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 3000 INTL 20050624) [0.170011] ACPI: Interpreter enabled [0.170069] ACPI: (supports S0 S3 S4 S5) [0.170309] ACPI: Using IOAPIC for interrupt routing [0.205488] PCI: Using host bridge windows from ACPI; if necessary, use pci=nocrs and report a bug [0.218138] ACPI: PCI Root Bridge [PCI0] (domain [bus 00-ff]) [0.245781] pci :00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO [0.255791] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [0.256056] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [0.256161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [0.256215] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [0.256272] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [0.266097] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) [0.266450] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [0.266800] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5 [0.267182] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0,
Re: Máquina não desliga sozinha com kernel 2.6.37
# lsmod | grep snd_hda_intel snd_hda_intel 18596 4 snd_hda_codec 52214 3 snd_hda_codec_idt,snd_hda_codec_hdmi,snd_hda_intel snd_pcm60511 3 snd_hda_intel,snd_hda_codec snd46670 14 snd_hda_codec_idt,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device snd_page_alloc 6081 2 snd_hda_intel,snd_pcm É, eu tenho o módulo ativo. Mas será que é por causa desse módulo? Porque o problema só ocorre no kernel 2.6.37 e desde o 2.6.33 a máquina nunca tinha congelado no desligamento mesmo com o módulo ativo. Abraço On Thu, 17 Feb 2011 21:56:13 -0400 Rodolfo rof20...@gmail.com wrote: SO mais um pedido, digite como root: lsmod | grep snd_hda_intel quero saber se você usa esse modulo como driver de som. Algumas pessoas tem este tipo de problema ao usar o módulo acima citado. Abraços Em 17 de fevereiro de 2011 21:43, André Luiz Fraga Moreira andre4deb...@gmail.com escreveu: # dmesg | grep acpi [0.00] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [0.00] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [0.00] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [0.00] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [2.950953] ACPI: acpi_idle registered with cpuidle [ 26.675955] acpi device:30: registered as cooling_device2 Estou mandando também a saída usando a opção -i do grep, para mostrar mais saídas referentes a acpi tanto em letras maiúsculas quanto em minúsculas de forma a ficar mais detalhado. # dmesg | grep -i acpi [0.00] ACPI: RSDP 000fbc60 00024 (v02 DELL ) [0.00] ACPI: XSDT bf66f200 00064 (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: FACP bf66f09c 000F4 (v04 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: DSDT bf66f800 05477 (v02 INT430 SYSFexxx 1001 INTL 20050624) [0.00] ACPI: FACS bf67e000 00040 [0.00] ACPI: HPET bf66f300 00038 (v01 DELLM08 0001 ASL 0061) [0.00] ACPI: APIC bf66f400 00068 (v01 DELLM08 27D80A10 ASL 0047) [0.00] ACPI: MCFG bf66f3c0 0003E (v16 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: SLIC bf66f49c 00176 (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: OSFR bf66ea00 0002C (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: BOOT bf66efc0 00028 (v01 DELLM08 27D80A10 ASL 0061) [0.00] ACPI: SSDT bf66da44 004CC (v01 PmRefCpuPm 3000 INTL 20050624) [0.00] ACPI: Local APIC address 0xfee0 [0.00] ACPI: PM-Timer IO Port: 0x1008 [0.00] ACPI: Local APIC address 0xfee0 [0.00] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [0.00] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [0.00] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [0.00] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [0.00] ACPI: IOAPIC (id[0x02] address[0xfec0] gsi_base[0]) [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [0.00] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [0.00] ACPI: IRQ0 used by override. [0.00] ACPI: IRQ2 used by override. [0.00] ACPI: IRQ9 used by override. [0.00] Using ACPI (MADT) for SMP configuration information [0.00] ACPI: HPET id: 0x8086a201 base: 0xfed0 [0.008585] ACPI: Core revision 20101013 [0.148662] ACPI: bus type pci registered [0.153294] ACPI: EC: Look up EC in DSDT [0.166448] ACPI: SSDT bf66e57a 00202 (v01 PmRef Cpu0Ist 3000 INTL 20050624) [0.166832] ACPI: Dynamic OEM Table Load: [0.166974] ACPI: SSDT (null) 00202 (v01 PmRef Cpu0Ist 3000 INTL 20050624) [0.167407] ACPI: SSDT bf66df10 005E5 (v01 PmRef Cpu0Cst 3001 INTL 20050624) [0.167778] ACPI: Dynamic OEM Table Load: [0.167920] ACPI: SSDT (null) 005E5 (v01 PmRef Cpu0Cst 3001 INTL 20050624) [0.168374] ACPI: SSDT bf66e77c 000C4 (v01 PmRef Cpu1Ist 3000 INTL 20050624) [0.168748] ACPI: Dynamic OEM Table Load: [0.168890] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist 3000 INTL 20050624) [0.169170] ACPI: SSDT bf66e4f5 00085 (v01 PmRef Cpu1Cst 3000 INTL 20050624) [0.169535] ACPI: Dynamic OEM Table Load: [0.169677] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 3000 INTL 20050624) [0.170011] ACPI: Interpreter enabled [0.170069] ACPI: (supports S0 S3 S4 S5) [0.170309] ACPI: Using IOAPIC for interrupt routing [0.205488] PCI: Using host bridge windows from ACPI; if necessary, use pci=nocrs and report a bug [0.218138]
Máquina não desliga sozinha com kernel 2.6.37
Boa noite, amigos da lista Estou com o seguinte problema: Depois que compilei e instalei o kernel 2.6.37 no meu Debian, às vezes meu notebook trava durante o desligamento. O reboot é sempre normal, mas o desligamento de vez em quando agarra, ficando parado em uma mensagem Disabling non-boot CPUs. Cheguei a suspeitar que era o BLK (Big Kernel Lock) que estava causando o problema, mas mesmo após desabilitá-lo, o erro ocorria. Pesquisando na Internet, vi que poderia ser problema na BIOS da máquina, mas fiz testes usando o kernel anterior (2.6.36.2) e não ocorreram problemas durante o desligamento, o que me fez suspeitar do kernel 2.6.37. Alguém sabe se é algum bug no kernel 2.6.37 ou algo do tipo que esteja causando isso? O estranho é que o problema não ocorre toda vez que eu desligo a máquina, só de vez em quando. Meu notebook é um Dell Inspiron 1525. Agradeço qualquer ajuda, valeu! -- André Luiz Fraga Moreira andre4deb...@gmail.com Matriculado no curso de Tecnologia em Redes de Computadores Linux Professional Institute Certified - LPIC 1 Debian user - www.debian.org twitter e identi.ca: @andreluizfm pgp0A6ClclABx.pgp Description: PGP signature