Bug#215905: basic info...
Linux version 2.4.17-32 ([EMAIL PROTECTED]) (gcc version 3.0.4) #1 Sat Mar 16 17:09:00 2 FP[0] enabled: Rev 1 Model 16 The 32-bit Kernel has started... Determining PDC firmware type: System Map. model 5cf0 0481 0002 78281eff 10f0 0008 00b2 02 vers 0300 CPUID vers 17 rev 10 (0x022a) model 9000/785/C3600 Total Memory: 512 Mb pagetable_init On node 0 totalpages: 131072 zone(0): 131072 pages. zone(1): 0 pages. zone(2): 0 pages. LCD display at f05d0008,f05d registered Kernel command line: root=/dev/sdb6 HOME=/ console=tty0 sti=10/6/2/0 sti_font=Vx Console: colour dummy device 160x64 Calibrating delay loop... 1101.00 BogoMIPS Memory: 513012k available Dentry-cache hash table entries: 65536 (order: 7, 524288 bytes) Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) Searching for devices... Found devices: 1. Astro BC Runway Port (12) at 0xfed0 [10], versions 0x582, 0x0, 0xb 2. Elroy PCI Bridge (13) at 0xfed3 [10/0], versions 0x782, 0x0, 0xa 3. Elroy PCI Bridge (13) at 0xfed32000 [10/1], versions 0x782, 0x0, 0xa 4. Elroy PCI Bridge (13) at 0xfed38000 [10/4], versions 0x782, 0x0, 0xa 5. Elroy PCI Bridge (13) at 0xfed3c000 [10/6], versions 0x782, 0x0, 0xa 6. Allegro W+ (0) at 0xfffa [32], versions 0x5cf, 0x0, 0x4 7. Memory (1) at 0xfed10200 [49], versions 0x9c, 0x0, 0x9 CPU(s): 1 x PA8600 (PCX-W+) at 552.00 MHz SBA found Astro 2.1 at 0xfed0 lba version TR4.0 (0x5) found at 0xfed3 lba version TR4.0 (0x5) found at 0xfed32000 lba version TR4.0 (0x5) found at 0xfed38000 lba version TR4.0 (0x5) found at 0xfed3c000 POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Enabled soft power switch (polling mode, io=0xf0400804). SuperIO: Found NS87560 Legacy I/O device at 00:0e.1 (IRQ 64) SuperIO: Serial port 1 at 0x3f8 SuperIO: Serial port 2 at 0x2f8 SuperIO: Parallel port at 0x378 SuperIO: Floppy controller at 0x3f0 SuperIO: ACPI at 0x7e0 SuperIO: USB regulator enabled parport0: PC-style at 0x378, irq 101 [PCSPP(,...)] Starting kswapd Journalled Block Device driver loaded STI PCI ROM enabled at 0xf700 PCI graphic ROM found at f700 (128 kB), fb @ fb00 (16 MB) PCI region 0: fb00 with 16384 kB PCI region 1: with 0 kB PCI region 2: fa00 with 16384 kB PCI region 3: with 0 kB PCI region 4: with 0 kB PCI region 5: with 0 kB PCI region 6: f700 with 128 kB PCI region 7: with 0 kB PCI region 8: with 0 kB PCI region 9: with 0 kB PCI region 10: with 0 kB PCI region 11: with 0 kB Trying PCI STI ROM at f700, PCI hpa at fb00 STI word mode ROM at f744, hpa=fb00 STI word mode ROM, id 35acda16-9a02587, conforms to spec rev. 8.0c STI PCI ROM disabled STI device: HPA4982A pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ed ttyS00 at port 0x03f8 (irq = 99) is a 16550A ttyS01 at port 0x02f8 (irq = 100) is a 16550A lp0: using parport0 (interrupt-driven). Generic RTC Driver v1.02 05/27/1999 Sam Creasey ([EMAIL PROTECTED]) block: 128 slots per queue, batch=32 RAMDISK driver initialized: 16 RAM disks of 6144K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NS87415: IDE controller on PCI bus 00 dev 70 NS87415: chipset revision 3 NS87415: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x0a00-0x0a07, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x0a08-0x0a0f, BIOS settings: hdc:pio, hdd:pio hda: FX4820T, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 103 hda: ATAPI 48X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.12 loop: loaded (max 8 devices) Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001) tulip0: no phy info, aborting mtable build tulip0: MII transceiver #1 config 1000 status 782d advertising 01e1. eth0: Digital DS21143 Tulip rev 65 at 0x1000, 00:10:83:FF:A8:2F, IRQ 66. tulip1: EEPROM default media type Autosense. tulip1: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block. tulip1: MII transceiver #1 config 3100 status 7849 advertising 0101. tulip1: Advertising 01e1 on PHY 1, previously advertising 0101. eth1: Digital DS21143 Tulip rev 65 at 0x12100, 00:10:83:FB:A9:AB, IRQ 129. tulip2: EEPROM default media type Autosense. tulip2: Index #0 - Media MII (#11) described by a 21142 MII PHY (3) block. tulip2: MII transceiver #1 config 3100 status 7849 advertising 0101. tulip2: Advertising 01e1 on PHY 1, previously advertising 0101. eth2: Digital DS21143 Tulip rev 65 at 0x12000, 00:10:83:FB:C9:33, IRQ 128. SCSI subsystem driver Revision: 1.00
Bug#215905: 215905
Is anything new..??? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#215905: XFree86
Package: XFree86 Version: XFree86 Version 4.1.0.1 / X Window System CPU : hp c3600 Platform : hppa Linux hpgla 2.4.17-32 #1 Sat Mar 16 17:09:00 MST 2002 parisc === X server can not detect correct display (--) PCI: (3:2:0) HP unknown chipset (0x108b) rev 3, Mem @ 0xfb00/24, 0xfa07 This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.1.0.1 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 21 December 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.16-64 parisc64 [ELF] (==) Log file: /var/log/XFree86.0.log, Time: Wed Oct 15 13:27:17 2003 (==) Using config file: /etc/X11/XF86Config-4 Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout Default Layout (**) |--Screen Default Screen (0) (**) | |--Monitor hp p920 (**) | |--Device HPA4982A (**) |--Input Device Generic Keyboard (**) XKB: rules: xfree86 (**) XKB: model: pc104 (**) XKB: layout: us (**) |--Input Device Configured Mouse (WW) The directory /usr/lib/X11/fonts/cyrillic does not exist. Entry deleted from font path. (**) FontPath set to unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100 (==) RgbPath set to /usr/X11R6/lib/X11/rgb (--) using VT number 3 (--) PCI: (3:2:0) HP unknown chipset (0x108b) rev 3, Mem @ 0xfb00/24, 0xfa07 (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400 (II) GLINT: driver for 3Dlabs chipsets: gamma, ti_pm2, ti_pm, pm3, pm2v, pm2, pm, 300sx, 500tx, mx, delta (II) S3VIRGE: driver (version 1.6.13) for S3 ViRGE chipsets: virge, 86C325, virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2, 86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365, trio 3d/2x, 86C362, 86C368 (II) SIS: driver for SiS chipsets: SIS5597, SIS5598, SIS530, SIS6326, SIS300, SIS630, SIS540 (II) SAVAGE: driver (version 1.1.16) for S3 Savage chipsets: Savage4, Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX, Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133, Twister, TwisterK (II) TRIDENT: driver for Trident chipsets: tvga8900d, cyber9320, cyber9388, cyber9397, cyber9397dvd, cyber9520, cyber9525dvd, cyberblade/e4, tgui9420dgi, tgui9440agi, tgui9660, tgui9680, providia9682, providia9685, cyber9382, cyber9385, 3dimage975, 3dimage985, blade3d, cyberbladei7, cyberbladei7d, cyberbladei1, cyberbladei1d, cyberbladeAi1, cyberbladeAi1d, cyberbladeXP, cyberbladeXPm (II) CHIPS: Driver for Chips and Technologies chipsets: ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct6, ct68554, ct69000, ct69030, ct64200, ct64300 (II) TDFX: Driver for 3dfx Banshee/Voodoo3 chipsets: 3dfx Banshee, 3dfx Voodoo3, 3dfx Voodoo5 (II) FBDev: driver for framebuffer: fbdev, afb (II) ATI: ATI driver (version 6.3.6) for chipsets: ati (II) R128: Driver for ATI Rage 128 chipsets: ATI Rage 128 RE (PCI), ATI Rage 128 RF (AGP), ATI Rage 128 RG (AGP), ATI Rage 128 RK (PCI), ATI Rage 128 RL (AGP), ATI Rage 128 Pro PD (PCI), ATI Rage 128 Pro PF (AGP), ATI Rage 128 Pro PP (PCI), ATI Rage 128 Pro PR (PCI), ATI Rage 128 Mobility LE (PCI), ATI Rage 128 Mobility LF (AGP), ATI Rage 128 Mobility MF (AGP), ATI Rage 128 Mobility ML (AGP) (II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP), ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP), ATI Radeon VE (AGP) (II) imstt: driver (version 1.0.0 for IMS TwinTurbo chipsets : imstt128, imstt3d (II) VGA: Generic VGA driver (version 4.0) for chipsets: generic (II) v4l driver for Video4Linux (EE) No devices detected. Fatal server error: no screens found When reporting a problem related to a server crash, please send the full server output, not just the last messages. This can be found in the log file /var/log/XFree86.0.log. Please report problems to [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
