Re: #LoveApache Project Stickers
Done! Thanks Sharan On 2019/08/14 16:01:21, Dmitriy Pavlov wrote: > Hi Sharan, > > I like an auto-generated version of a sticker for Apache Ignite, > > could you please add it to the order? > > http://www.apache.org/logos/loveapache/ignite.png > > Sincerely, > Dmitriy Pavlov > > > ср, 14 авг. 2019 г. в 17:27, Adina Crainiceanu : > > > Hi Sharan,. > > Could we add Daniel's version of #LoveApache for Rya to the order? > > http://www.apache.org/logos/loveapache/rya.png > > > > Thanks, > > Adina > > > > On Tue, Aug 13, 2019 at 5:02 PM Aizhamal Nurmamat kyzy > > wrote: > > > > > Hey Sharan, > > > > > > Could we use Daniel's version of the logo for Airflow stickers > > > http://www.apache.org/logos/loveapache/airflow.png? The one I shared > > > is pixelated, Daniel's is much better. Sorry for causing so many > > troubles.. > > > :( > > > > > > On Tue, Aug 13, 2019 at 1:49 PM Sharan Foga wrote: > > > > > > > Hi Aizhamal > > > > > > > > Yes, those work. I have added them to the order. > > > > > > > > Thanks > > > > Sharan > > > > > > > > On 2019/08/13 20:42:11, Aizhamal Nurmamat kyzy > > > > > > > wrote: > > > > > Ah, not attachments are allowed. How about this > > > > > > > > > > > > > > https://drive.google.com/drive/folders/1r7aw8eKmbkBo41IE_PR_--MB-U6bwW8L?usp=sharing > > > > > ? > > > > > > > > > > > > > > > > > > > > > > > > > On Tue, Aug 13, 2019 at 1:34 PM Aizhamal Nurmamat kyzy < > > > > aizha...@google.com> > > > > > wrote: > > > > > > > > > > > Hi Sharan, > > > > > > > > > > > > How about these graphics for #LoveApache stickers? LMK if they work > > > :) > > > > > > > > > > > > > > > > > > On Tue, Aug 13, 2019 at 1:19 PM Daniel Gruno > > > > > > wrote: > > > > > > > > > > > >> On 8/13/19 10:15 PM, Sharan Foga wrote: > > > > > >> > Hi Daniel > > > > > >> > > > > > > >> > Absolutely brilliant! I can pick up the beam and airflow ones > > > that I > > > > > >> need from there. > > > > > >> > > > > > >> Airflow's logo has some serious padding on it that poses a > > problem. > > > > > >> Those should ideally be cut form the original svg first.. > > > > > >> > > > > > >> > > > > > > >> > Anyone else that wants them then please let me know. > > > > > >> > > > > > > >> > Thanks > > > > > >> > Sharan > > > > > >> > > > > > > >> > On 2019/08/13 20:02:24, Daniel Gruno > > > wrote: > > > > > >> >> On 8/13/19 9:45 PM, Sharan Foga wrote: > > > > > >> >>> Hi All > > > > > >> >>> > > > > > >> >>> If you would like some #LoveApache versions of your project > > > > stickers > > > > > >> available at the ASF booth for Apachecon then please make sure > > that > > > > you > > > > > >> create the graphic based on the instructions below > > > > > >> >>> > > > > > >> >>> https://www.apache.org/foundation/press/kit/#loveapache > > > > > >> >>> > > > > > >> >>> and then send me the graphic so I can use it for the sticker > > > > order. > > > > > >> >> > > > > > >> >> There's an auto-generator that runs and spits out images at: > > > > > >> >> http://www.apache.org/logos/loveapache/ > > > > > >> >> > > > > > >> >> it uses the same defaults as the Powered-By generator, that > > > is...if > > > > > >> >> there is an original called $project-pb.svg, it will use that > > > one, > > > > > >> >> otherwise it will find the most round/square logo and use that. > > > > > >> >> > > > > > >> >> it's currently running round one, images slowly coming up... > > > > > >> >> they're not the best fit for all projects, but it works for > > some > > > :) > > > > > >> >> > > > > > >> >>> > > > > > >> >>> Thanks > > > > > >> >>> Sharan > > > > > >> >>> > > > > > >> >>> > > > > - > > > > > >> >>> To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > > > > >> >>> For additional commands, e-mail: > > dev-h...@community.apache.org > > > > > >> >>> > > > > > >> >> > > > > > >> >> > > > > > >> >> > > > > - > > > > > >> >> To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > > > > >> >> For additional commands, e-mail: dev-h...@community.apache.org > > > > > >> >> > > > > > >> >> > > > > > >> > > > > > > >> > > > > > - > > > > > >> > To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > > > > >> > For additional commands, e-mail: dev-h...@community.apache.org > > > > > >> > > > > > > >> > > > > > >> > > > > > >> > > > - > > > > > >> To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > > > > >> For additional commands, e-mail: dev-h...@community.apache.org > > > > > >> > > > > > >> > > > > > > > > > > > > > - > > > > To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > > > For additional commands, e-mail: dev-h...@community.apache.org > > > > > > > > >
Re: #LoveApache Project Stickers
Hi Dmitriy No problem and will do. Thanks Sharan On Wed, 14 Aug 2019, 18:01 Dmitriy Pavlov, wrote: > Hi Sharan, > > I like an auto-generated version of a sticker for Apache Ignite, > > could you please add it to the order? > > http://www.apache.org/logos/loveapache/ignite.png > > Sincerely, > Dmitriy Pavlov > > > ср, 14 авг. 2019 г. в 17:27, Adina Crainiceanu : > > > Hi Sharan,. > > Could we add Daniel's version of #LoveApache for Rya to the order? > > http://www.apache.org/logos/loveapache/rya.png > > > > Thanks, > > Adina > > > > On Tue, Aug 13, 2019 at 5:02 PM Aizhamal Nurmamat kyzy > > wrote: > > > > > Hey Sharan, > > > > > > Could we use Daniel's version of the logo for Airflow stickers > > > http://www.apache.org/logos/loveapache/airflow.png? The one I shared > > > is pixelated, Daniel's is much better. Sorry for causing so many > > troubles.. > > > :( > > > > > > On Tue, Aug 13, 2019 at 1:49 PM Sharan Foga wrote: > > > > > > > Hi Aizhamal > > > > > > > > Yes, those work. I have added them to the order. > > > > > > > > Thanks > > > > Sharan > > > > > > > > On 2019/08/13 20:42:11, Aizhamal Nurmamat kyzy > > > > > > > wrote: > > > > > Ah, not attachments are allowed. How about this > > > > > > > > > > > > > > > https://drive.google.com/drive/folders/1r7aw8eKmbkBo41IE_PR_--MB-U6bwW8L?usp=sharing > > > > > ? > > > > > > > > > > > > > > > > > > > > > > > > > On Tue, Aug 13, 2019 at 1:34 PM Aizhamal Nurmamat kyzy < > > > > aizha...@google.com> > > > > > wrote: > > > > > > > > > > > Hi Sharan, > > > > > > > > > > > > How about these graphics for #LoveApache stickers? LMK if they > work > > > :) > > > > > > > > > > > > > > > > > > On Tue, Aug 13, 2019 at 1:19 PM Daniel Gruno < > humbed...@apache.org > > > > > > > wrote: > > > > > > > > > > > >> On 8/13/19 10:15 PM, Sharan Foga wrote: > > > > > >> > Hi Daniel > > > > > >> > > > > > > >> > Absolutely brilliant! I can pick up the beam and airflow ones > > > that I > > > > > >> need from there. > > > > > >> > > > > > >> Airflow's logo has some serious padding on it that poses a > > problem. > > > > > >> Those should ideally be cut form the original svg first.. > > > > > >> > > > > > >> > > > > > > >> > Anyone else that wants them then please let me know. > > > > > >> > > > > > > >> > Thanks > > > > > >> > Sharan > > > > > >> > > > > > > >> > On 2019/08/13 20:02:24, Daniel Gruno > > > wrote: > > > > > >> >> On 8/13/19 9:45 PM, Sharan Foga wrote: > > > > > >> >>> Hi All > > > > > >> >>> > > > > > >> >>> If you would like some #LoveApache versions of your project > > > > stickers > > > > > >> available at the ASF booth for Apachecon then please make sure > > that > > > > you > > > > > >> create the graphic based on the instructions below > > > > > >> >>> > > > > > >> >>> https://www.apache.org/foundation/press/kit/#loveapache > > > > > >> >>> > > > > > >> >>> and then send me the graphic so I can use it for the sticker > > > > order. > > > > > >> >> > > > > > >> >> There's an auto-generator that runs and spits out images at: > > > > > >> >> http://www.apache.org/logos/loveapache/ > > > > > >> >> > > > > > >> >> it uses the same defaults as the Powered-By generator, that > > > is...if > > > > > >> >> there is an original called $project-pb.svg, it will use that > > > one, > > > > > >> >> otherwise it will find the most round/square logo and use > that. > > > > > >> >> > > > > > >> >> it's currently running round one, images slowly coming up... > > > > > >> >> they're not the best fit for all projects, but it works for > > some > > > :) > > > > > >> >> > > > > > >> >>> > > > > > >> >>> Thanks > > > > > >> >>> Sharan > > > > > >> >>> > > > > > >> >>> > > > > - > > > > > >> >>> To unsubscribe, e-mail: > dev-unsubscr...@community.apache.org > > > > > >> >>> For additional commands, e-mail: > > dev-h...@community.apache.org > > > > > >> >>> > > > > > >> >> > > > > > >> >> > > > > > >> >> > > > > - > > > > > >> >> To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > > > > >> >> For additional commands, e-mail: > dev-h...@community.apache.org > > > > > >> >> > > > > > >> >> > > > > > >> > > > > > > >> > > > > > - > > > > > >> > To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > > > > >> > For additional commands, e-mail: > dev-h...@community.apache.org > > > > > >> > > > > > > >> > > > > > >> > > > > > >> > > > - > > > > > >> To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > > > > >> For additional commands, e-mail: dev-h...@community.apache.org > > > > > >> > > > > > >> > > > > > > > > > > > > > - > > > > To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > > > For additional c
Re: #LoveApache Project Stickers
Hi Adina Sure and will do. Thanks Sharan On Wed, 14 Aug 2019, 16:27 Adina Crainiceanu, wrote: > Hi Sharan,. > Could we add Daniel's version of #LoveApache for Rya to the order? > http://www.apache.org/logos/loveapache/rya.png > > Thanks, > Adina > > On Tue, Aug 13, 2019 at 5:02 PM Aizhamal Nurmamat kyzy > wrote: > > > Hey Sharan, > > > > Could we use Daniel's version of the logo for Airflow stickers > > http://www.apache.org/logos/loveapache/airflow.png? The one I shared > > is pixelated, Daniel's is much better. Sorry for causing so many > troubles.. > > :( > > > > On Tue, Aug 13, 2019 at 1:49 PM Sharan Foga wrote: > > > > > Hi Aizhamal > > > > > > Yes, those work. I have added them to the order. > > > > > > Thanks > > > Sharan > > > > > > On 2019/08/13 20:42:11, Aizhamal Nurmamat kyzy > > > > > wrote: > > > > Ah, not attachments are allowed. How about this > > > > > > > > > > https://drive.google.com/drive/folders/1r7aw8eKmbkBo41IE_PR_--MB-U6bwW8L?usp=sharing > > > > ? > > > > > > > > > > > > > > > > > > > > On Tue, Aug 13, 2019 at 1:34 PM Aizhamal Nurmamat kyzy < > > > aizha...@google.com> > > > > wrote: > > > > > > > > > Hi Sharan, > > > > > > > > > > How about these graphics for #LoveApache stickers? LMK if they work > > :) > > > > > > > > > > > > > > > On Tue, Aug 13, 2019 at 1:19 PM Daniel Gruno > > > > wrote: > > > > > > > > > >> On 8/13/19 10:15 PM, Sharan Foga wrote: > > > > >> > Hi Daniel > > > > >> > > > > > >> > Absolutely brilliant! I can pick up the beam and airflow ones > > that I > > > > >> need from there. > > > > >> > > > > >> Airflow's logo has some serious padding on it that poses a > problem. > > > > >> Those should ideally be cut form the original svg first.. > > > > >> > > > > >> > > > > > >> > Anyone else that wants them then please let me know. > > > > >> > > > > > >> > Thanks > > > > >> > Sharan > > > > >> > > > > > >> > On 2019/08/13 20:02:24, Daniel Gruno > > wrote: > > > > >> >> On 8/13/19 9:45 PM, Sharan Foga wrote: > > > > >> >>> Hi All > > > > >> >>> > > > > >> >>> If you would like some #LoveApache versions of your project > > > stickers > > > > >> available at the ASF booth for Apachecon then please make sure > that > > > you > > > > >> create the graphic based on the instructions below > > > > >> >>> > > > > >> >>> https://www.apache.org/foundation/press/kit/#loveapache > > > > >> >>> > > > > >> >>> and then send me the graphic so I can use it for the sticker > > > order. > > > > >> >> > > > > >> >> There's an auto-generator that runs and spits out images at: > > > > >> >> http://www.apache.org/logos/loveapache/ > > > > >> >> > > > > >> >> it uses the same defaults as the Powered-By generator, that > > is...if > > > > >> >> there is an original called $project-pb.svg, it will use that > > one, > > > > >> >> otherwise it will find the most round/square logo and use that. > > > > >> >> > > > > >> >> it's currently running round one, images slowly coming up... > > > > >> >> they're not the best fit for all projects, but it works for > some > > :) > > > > >> >> > > > > >> >>> > > > > >> >>> Thanks > > > > >> >>> Sharan > > > > >> >>> > > > > >> >>> > > > - > > > > >> >>> To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > > > >> >>> For additional commands, e-mail: > dev-h...@community.apache.org > > > > >> >>> > > > > >> >> > > > > >> >> > > > > >> >> > > > - > > > > >> >> To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > > > >> >> For additional commands, e-mail: dev-h...@community.apache.org > > > > >> >> > > > > >> >> > > > > >> > > > > > >> > > > > - > > > > >> > To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > > > >> > For additional commands, e-mail: dev-h...@community.apache.org > > > > >> > > > > > >> > > > > >> > > > > >> > > - > > > > >> To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > > > >> For additional commands, e-mail: dev-h...@community.apache.org > > > > >> > > > > >> > > > > > > > > > > - > > > To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > > For additional commands, e-mail: dev-h...@community.apache.org > > > > > > > > > > > -- > Dr. Adina Crainiceanu > Associate Professor > Computer Science Department > United States Naval Academy > 410-293-6822 > ad...@usna.edu > http://www.usna.edu/Users/cs/adina/ >
Re: #LoveApache Project Stickers
Hi Sharan, I like an auto-generated version of a sticker for Apache Ignite, could you please add it to the order? http://www.apache.org/logos/loveapache/ignite.png Sincerely, Dmitriy Pavlov ср, 14 авг. 2019 г. в 17:27, Adina Crainiceanu : > Hi Sharan,. > Could we add Daniel's version of #LoveApache for Rya to the order? > http://www.apache.org/logos/loveapache/rya.png > > Thanks, > Adina > > On Tue, Aug 13, 2019 at 5:02 PM Aizhamal Nurmamat kyzy > wrote: > > > Hey Sharan, > > > > Could we use Daniel's version of the logo for Airflow stickers > > http://www.apache.org/logos/loveapache/airflow.png? The one I shared > > is pixelated, Daniel's is much better. Sorry for causing so many > troubles.. > > :( > > > > On Tue, Aug 13, 2019 at 1:49 PM Sharan Foga wrote: > > > > > Hi Aizhamal > > > > > > Yes, those work. I have added them to the order. > > > > > > Thanks > > > Sharan > > > > > > On 2019/08/13 20:42:11, Aizhamal Nurmamat kyzy > > > > > wrote: > > > > Ah, not attachments are allowed. How about this > > > > > > > > > > https://drive.google.com/drive/folders/1r7aw8eKmbkBo41IE_PR_--MB-U6bwW8L?usp=sharing > > > > ? > > > > > > > > > > > > > > > > > > > > On Tue, Aug 13, 2019 at 1:34 PM Aizhamal Nurmamat kyzy < > > > aizha...@google.com> > > > > wrote: > > > > > > > > > Hi Sharan, > > > > > > > > > > How about these graphics for #LoveApache stickers? LMK if they work > > :) > > > > > > > > > > > > > > > On Tue, Aug 13, 2019 at 1:19 PM Daniel Gruno > > > > wrote: > > > > > > > > > >> On 8/13/19 10:15 PM, Sharan Foga wrote: > > > > >> > Hi Daniel > > > > >> > > > > > >> > Absolutely brilliant! I can pick up the beam and airflow ones > > that I > > > > >> need from there. > > > > >> > > > > >> Airflow's logo has some serious padding on it that poses a > problem. > > > > >> Those should ideally be cut form the original svg first.. > > > > >> > > > > >> > > > > > >> > Anyone else that wants them then please let me know. > > > > >> > > > > > >> > Thanks > > > > >> > Sharan > > > > >> > > > > > >> > On 2019/08/13 20:02:24, Daniel Gruno > > wrote: > > > > >> >> On 8/13/19 9:45 PM, Sharan Foga wrote: > > > > >> >>> Hi All > > > > >> >>> > > > > >> >>> If you would like some #LoveApache versions of your project > > > stickers > > > > >> available at the ASF booth for Apachecon then please make sure > that > > > you > > > > >> create the graphic based on the instructions below > > > > >> >>> > > > > >> >>> https://www.apache.org/foundation/press/kit/#loveapache > > > > >> >>> > > > > >> >>> and then send me the graphic so I can use it for the sticker > > > order. > > > > >> >> > > > > >> >> There's an auto-generator that runs and spits out images at: > > > > >> >> http://www.apache.org/logos/loveapache/ > > > > >> >> > > > > >> >> it uses the same defaults as the Powered-By generator, that > > is...if > > > > >> >> there is an original called $project-pb.svg, it will use that > > one, > > > > >> >> otherwise it will find the most round/square logo and use that. > > > > >> >> > > > > >> >> it's currently running round one, images slowly coming up... > > > > >> >> they're not the best fit for all projects, but it works for > some > > :) > > > > >> >> > > > > >> >>> > > > > >> >>> Thanks > > > > >> >>> Sharan > > > > >> >>> > > > > >> >>> > > > - > > > > >> >>> To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > > > >> >>> For additional commands, e-mail: > dev-h...@community.apache.org > > > > >> >>> > > > > >> >> > > > > >> >> > > > > >> >> > > > - > > > > >> >> To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > > > >> >> For additional commands, e-mail: dev-h...@community.apache.org > > > > >> >> > > > > >> >> > > > > >> > > > > > >> > > > > - > > > > >> > To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > > > >> > For additional commands, e-mail: dev-h...@community.apache.org > > > > >> > > > > > >> > > > > >> > > > > >> > > - > > > > >> To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > > > >> For additional commands, e-mail: dev-h...@community.apache.org > > > > >> > > > > >> > > > > > > > > > > - > > > To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > > For additional commands, e-mail: dev-h...@community.apache.org > > > > > > > > > > > -- > Dr. Adina Crainiceanu > Associate Professor > Computer Science Department > United States Naval Academy > 410-293-6822 > ad...@usna.edu > http://www.usna.edu/Users/cs/adina/ >
Re: #LoveApache Project Stickers
Hi Sharan,. Could we add Daniel's version of #LoveApache for Rya to the order? http://www.apache.org/logos/loveapache/rya.png Thanks, Adina On Tue, Aug 13, 2019 at 5:02 PM Aizhamal Nurmamat kyzy wrote: > Hey Sharan, > > Could we use Daniel's version of the logo for Airflow stickers > http://www.apache.org/logos/loveapache/airflow.png? The one I shared > is pixelated, Daniel's is much better. Sorry for causing so many troubles.. > :( > > On Tue, Aug 13, 2019 at 1:49 PM Sharan Foga wrote: > > > Hi Aizhamal > > > > Yes, those work. I have added them to the order. > > > > Thanks > > Sharan > > > > On 2019/08/13 20:42:11, Aizhamal Nurmamat kyzy > > > wrote: > > > Ah, not attachments are allowed. How about this > > > > > > https://drive.google.com/drive/folders/1r7aw8eKmbkBo41IE_PR_--MB-U6bwW8L?usp=sharing > > > ? > > > > > > > > > > > > > > > On Tue, Aug 13, 2019 at 1:34 PM Aizhamal Nurmamat kyzy < > > aizha...@google.com> > > > wrote: > > > > > > > Hi Sharan, > > > > > > > > How about these graphics for #LoveApache stickers? LMK if they work > :) > > > > > > > > > > > > On Tue, Aug 13, 2019 at 1:19 PM Daniel Gruno > > wrote: > > > > > > > >> On 8/13/19 10:15 PM, Sharan Foga wrote: > > > >> > Hi Daniel > > > >> > > > > >> > Absolutely brilliant! I can pick up the beam and airflow ones > that I > > > >> need from there. > > > >> > > > >> Airflow's logo has some serious padding on it that poses a problem. > > > >> Those should ideally be cut form the original svg first.. > > > >> > > > >> > > > > >> > Anyone else that wants them then please let me know. > > > >> > > > > >> > Thanks > > > >> > Sharan > > > >> > > > > >> > On 2019/08/13 20:02:24, Daniel Gruno > wrote: > > > >> >> On 8/13/19 9:45 PM, Sharan Foga wrote: > > > >> >>> Hi All > > > >> >>> > > > >> >>> If you would like some #LoveApache versions of your project > > stickers > > > >> available at the ASF booth for Apachecon then please make sure that > > you > > > >> create the graphic based on the instructions below > > > >> >>> > > > >> >>> https://www.apache.org/foundation/press/kit/#loveapache > > > >> >>> > > > >> >>> and then send me the graphic so I can use it for the sticker > > order. > > > >> >> > > > >> >> There's an auto-generator that runs and spits out images at: > > > >> >> http://www.apache.org/logos/loveapache/ > > > >> >> > > > >> >> it uses the same defaults as the Powered-By generator, that > is...if > > > >> >> there is an original called $project-pb.svg, it will use that > one, > > > >> >> otherwise it will find the most round/square logo and use that. > > > >> >> > > > >> >> it's currently running round one, images slowly coming up... > > > >> >> they're not the best fit for all projects, but it works for some > :) > > > >> >> > > > >> >>> > > > >> >>> Thanks > > > >> >>> Sharan > > > >> >>> > > > >> >>> > > - > > > >> >>> To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > > >> >>> For additional commands, e-mail: dev-h...@community.apache.org > > > >> >>> > > > >> >> > > > >> >> > > > >> >> > > - > > > >> >> To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > > >> >> For additional commands, e-mail: dev-h...@community.apache.org > > > >> >> > > > >> >> > > > >> > > > > >> > > > - > > > >> > To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > > >> > For additional commands, e-mail: dev-h...@community.apache.org > > > >> > > > > >> > > > >> > > > >> > - > > > >> To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > > >> For additional commands, e-mail: dev-h...@community.apache.org > > > >> > > > >> > > > > > > > - > > To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > For additional commands, e-mail: dev-h...@community.apache.org > > > > > -- Dr. Adina Crainiceanu Associate Professor Computer Science Department United States Naval Academy 410-293-6822 ad...@usna.edu http://www.usna.edu/Users/cs/adina/
Re: #LoveApache Project Stickers
Hey Sharan, Could we use Daniel's version of the logo for Airflow stickers http://www.apache.org/logos/loveapache/airflow.png? The one I shared is pixelated, Daniel's is much better. Sorry for causing so many troubles.. :( On Tue, Aug 13, 2019 at 1:49 PM Sharan Foga wrote: > Hi Aizhamal > > Yes, those work. I have added them to the order. > > Thanks > Sharan > > On 2019/08/13 20:42:11, Aizhamal Nurmamat kyzy > wrote: > > Ah, not attachments are allowed. How about this > > > https://drive.google.com/drive/folders/1r7aw8eKmbkBo41IE_PR_--MB-U6bwW8L?usp=sharing > > ? > > > > > > > > > > On Tue, Aug 13, 2019 at 1:34 PM Aizhamal Nurmamat kyzy < > aizha...@google.com> > > wrote: > > > > > Hi Sharan, > > > > > > How about these graphics for #LoveApache stickers? LMK if they work :) > > > > > > > > > On Tue, Aug 13, 2019 at 1:19 PM Daniel Gruno > wrote: > > > > > >> On 8/13/19 10:15 PM, Sharan Foga wrote: > > >> > Hi Daniel > > >> > > > >> > Absolutely brilliant! I can pick up the beam and airflow ones that I > > >> need from there. > > >> > > >> Airflow's logo has some serious padding on it that poses a problem. > > >> Those should ideally be cut form the original svg first.. > > >> > > >> > > > >> > Anyone else that wants them then please let me know. > > >> > > > >> > Thanks > > >> > Sharan > > >> > > > >> > On 2019/08/13 20:02:24, Daniel Gruno wrote: > > >> >> On 8/13/19 9:45 PM, Sharan Foga wrote: > > >> >>> Hi All > > >> >>> > > >> >>> If you would like some #LoveApache versions of your project > stickers > > >> available at the ASF booth for Apachecon then please make sure that > you > > >> create the graphic based on the instructions below > > >> >>> > > >> >>> https://www.apache.org/foundation/press/kit/#loveapache > > >> >>> > > >> >>> and then send me the graphic so I can use it for the sticker > order. > > >> >> > > >> >> There's an auto-generator that runs and spits out images at: > > >> >> http://www.apache.org/logos/loveapache/ > > >> >> > > >> >> it uses the same defaults as the Powered-By generator, that is...if > > >> >> there is an original called $project-pb.svg, it will use that one, > > >> >> otherwise it will find the most round/square logo and use that. > > >> >> > > >> >> it's currently running round one, images slowly coming up... > > >> >> they're not the best fit for all projects, but it works for some :) > > >> >> > > >> >>> > > >> >>> Thanks > > >> >>> Sharan > > >> >>> > > >> >>> > - > > >> >>> To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > >> >>> For additional commands, e-mail: dev-h...@community.apache.org > > >> >>> > > >> >> > > >> >> > > >> >> > - > > >> >> To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > >> >> For additional commands, e-mail: dev-h...@community.apache.org > > >> >> > > >> >> > > >> > > > >> > > - > > >> > To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > >> > For additional commands, e-mail: dev-h...@community.apache.org > > >> > > > >> > > >> > > >> - > > >> To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > >> For additional commands, e-mail: dev-h...@community.apache.org > > >> > > >> > > > > - > To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > For additional commands, e-mail: dev-h...@community.apache.org > >
Re: #LoveApache Project Stickers
On 8/13/19 10:42 PM, Aizhamal Nurmamat kyzy wrote: Ah, not attachments are allowed. How about this https://drive.google.com/drive/folders/1r7aw8eKmbkBo41IE_PR_--MB-U6bwW8L?usp=sharing ? Please see http://www.apache.org/logos/loveapache/airflow.png now. I took the liberty of touching up the airflow logo, the colors needed a bunch of work. The standard logo was also refreshed, www.apache.org/logos/#airflow On Tue, Aug 13, 2019 at 1:34 PM Aizhamal Nurmamat kyzy wrote: Hi Sharan, How about these graphics for #LoveApache stickers? LMK if they work :) On Tue, Aug 13, 2019 at 1:19 PM Daniel Gruno wrote: On 8/13/19 10:15 PM, Sharan Foga wrote: Hi Daniel Absolutely brilliant! I can pick up the beam and airflow ones that I need from there. Airflow's logo has some serious padding on it that poses a problem. Those should ideally be cut form the original svg first.. Anyone else that wants them then please let me know. Thanks Sharan On 2019/08/13 20:02:24, Daniel Gruno wrote: On 8/13/19 9:45 PM, Sharan Foga wrote: Hi All If you would like some #LoveApache versions of your project stickers available at the ASF booth for Apachecon then please make sure that you create the graphic based on the instructions below https://www.apache.org/foundation/press/kit/#loveapache and then send me the graphic so I can use it for the sticker order. There's an auto-generator that runs and spits out images at: http://www.apache.org/logos/loveapache/ it uses the same defaults as the Powered-By generator, that is...if there is an original called $project-pb.svg, it will use that one, otherwise it will find the most round/square logo and use that. it's currently running round one, images slowly coming up... they're not the best fit for all projects, but it works for some :) Thanks Sharan - To unsubscribe, e-mail: dev-unsubscr...@community.apache.org For additional commands, e-mail: dev-h...@community.apache.org - To unsubscribe, e-mail: dev-unsubscr...@community.apache.org For additional commands, e-mail: dev-h...@community.apache.org - To unsubscribe, e-mail: dev-unsubscr...@community.apache.org For additional commands, e-mail: dev-h...@community.apache.org - To unsubscribe, e-mail: dev-unsubscr...@community.apache.org For additional commands, e-mail: dev-h...@community.apache.org - To unsubscribe, e-mail: dev-unsubscr...@community.apache.org For additional commands, e-mail: dev-h...@community.apache.org
Re: #LoveApache Project Stickers
Hi Aizhamal Yes, those work. I have added them to the order. Thanks Sharan On 2019/08/13 20:42:11, Aizhamal Nurmamat kyzy wrote: > Ah, not attachments are allowed. How about this > https://drive.google.com/drive/folders/1r7aw8eKmbkBo41IE_PR_--MB-U6bwW8L?usp=sharing > ? > > > > > On Tue, Aug 13, 2019 at 1:34 PM Aizhamal Nurmamat kyzy > wrote: > > > Hi Sharan, > > > > How about these graphics for #LoveApache stickers? LMK if they work :) > > > > > > On Tue, Aug 13, 2019 at 1:19 PM Daniel Gruno wrote: > > > >> On 8/13/19 10:15 PM, Sharan Foga wrote: > >> > Hi Daniel > >> > > >> > Absolutely brilliant! I can pick up the beam and airflow ones that I > >> need from there. > >> > >> Airflow's logo has some serious padding on it that poses a problem. > >> Those should ideally be cut form the original svg first.. > >> > >> > > >> > Anyone else that wants them then please let me know. > >> > > >> > Thanks > >> > Sharan > >> > > >> > On 2019/08/13 20:02:24, Daniel Gruno wrote: > >> >> On 8/13/19 9:45 PM, Sharan Foga wrote: > >> >>> Hi All > >> >>> > >> >>> If you would like some #LoveApache versions of your project stickers > >> available at the ASF booth for Apachecon then please make sure that you > >> create the graphic based on the instructions below > >> >>> > >> >>> https://www.apache.org/foundation/press/kit/#loveapache > >> >>> > >> >>> and then send me the graphic so I can use it for the sticker order. > >> >> > >> >> There's an auto-generator that runs and spits out images at: > >> >> http://www.apache.org/logos/loveapache/ > >> >> > >> >> it uses the same defaults as the Powered-By generator, that is...if > >> >> there is an original called $project-pb.svg, it will use that one, > >> >> otherwise it will find the most round/square logo and use that. > >> >> > >> >> it's currently running round one, images slowly coming up... > >> >> they're not the best fit for all projects, but it works for some :) > >> >> > >> >>> > >> >>> Thanks > >> >>> Sharan > >> >>> > >> >>> - > >> >>> To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > >> >>> For additional commands, e-mail: dev-h...@community.apache.org > >> >>> > >> >> > >> >> > >> >> - > >> >> To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > >> >> For additional commands, e-mail: dev-h...@community.apache.org > >> >> > >> >> > >> > > >> > - > >> > To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > >> > For additional commands, e-mail: dev-h...@community.apache.org > >> > > >> > >> > >> - > >> To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > >> For additional commands, e-mail: dev-h...@community.apache.org > >> > >> > - To unsubscribe, e-mail: dev-unsubscr...@community.apache.org For additional commands, e-mail: dev-h...@community.apache.org
Re: #LoveApache Project Stickers
Hi Aizhamal The Beam one is fine, and as Daniel says the Airflow one needs some work. It's too small and looks odd, so if there is anything you can do there, that would be good. Thanks Sharan On 2019/08/13 20:34:51, Aizhamal Nurmamat kyzy wrote: > Hi Sharan, > > How about these graphics for #LoveApache stickers? LMK if they work :) > > > On Tue, Aug 13, 2019 at 1:19 PM Daniel Gruno wrote: > > > On 8/13/19 10:15 PM, Sharan Foga wrote: > > > Hi Daniel > > > > > > Absolutely brilliant! I can pick up the beam and airflow ones that I > > need from there. > > > > Airflow's logo has some serious padding on it that poses a problem. > > Those should ideally be cut form the original svg first.. > > > > > > > > Anyone else that wants them then please let me know. > > > > > > Thanks > > > Sharan > > > > > > On 2019/08/13 20:02:24, Daniel Gruno wrote: > > >> On 8/13/19 9:45 PM, Sharan Foga wrote: > > >>> Hi All > > >>> > > >>> If you would like some #LoveApache versions of your project stickers > > available at the ASF booth for Apachecon then please make sure that you > > create the graphic based on the instructions below > > >>> > > >>> https://www.apache.org/foundation/press/kit/#loveapache > > >>> > > >>> and then send me the graphic so I can use it for the sticker order. > > >> > > >> There's an auto-generator that runs and spits out images at: > > >> http://www.apache.org/logos/loveapache/ > > >> > > >> it uses the same defaults as the Powered-By generator, that is...if > > >> there is an original called $project-pb.svg, it will use that one, > > >> otherwise it will find the most round/square logo and use that. > > >> > > >> it's currently running round one, images slowly coming up... > > >> they're not the best fit for all projects, but it works for some :) > > >> > > >>> > > >>> Thanks > > >>> Sharan > > >>> > > >>> - > > >>> To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > >>> For additional commands, e-mail: dev-h...@community.apache.org > > >>> > > >> > > >> > > >> - > > >> To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > >> For additional commands, e-mail: dev-h...@community.apache.org > > >> > > >> > > > > > > - > > > To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > > For additional commands, e-mail: dev-h...@community.apache.org > > > > > > > > > - > > To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > For additional commands, e-mail: dev-h...@community.apache.org > > > > > - To unsubscribe, e-mail: dev-unsubscr...@community.apache.org For additional commands, e-mail: dev-h...@community.apache.org
Re: #LoveApache Project Stickers
Ah, not attachments are allowed. How about this https://drive.google.com/drive/folders/1r7aw8eKmbkBo41IE_PR_--MB-U6bwW8L?usp=sharing ? On Tue, Aug 13, 2019 at 1:34 PM Aizhamal Nurmamat kyzy wrote: > Hi Sharan, > > How about these graphics for #LoveApache stickers? LMK if they work :) > > > On Tue, Aug 13, 2019 at 1:19 PM Daniel Gruno wrote: > >> On 8/13/19 10:15 PM, Sharan Foga wrote: >> > Hi Daniel >> > >> > Absolutely brilliant! I can pick up the beam and airflow ones that I >> need from there. >> >> Airflow's logo has some serious padding on it that poses a problem. >> Those should ideally be cut form the original svg first.. >> >> > >> > Anyone else that wants them then please let me know. >> > >> > Thanks >> > Sharan >> > >> > On 2019/08/13 20:02:24, Daniel Gruno wrote: >> >> On 8/13/19 9:45 PM, Sharan Foga wrote: >> >>> Hi All >> >>> >> >>> If you would like some #LoveApache versions of your project stickers >> available at the ASF booth for Apachecon then please make sure that you >> create the graphic based on the instructions below >> >>> >> >>> https://www.apache.org/foundation/press/kit/#loveapache >> >>> >> >>> and then send me the graphic so I can use it for the sticker order. >> >> >> >> There's an auto-generator that runs and spits out images at: >> >> http://www.apache.org/logos/loveapache/ >> >> >> >> it uses the same defaults as the Powered-By generator, that is...if >> >> there is an original called $project-pb.svg, it will use that one, >> >> otherwise it will find the most round/square logo and use that. >> >> >> >> it's currently running round one, images slowly coming up... >> >> they're not the best fit for all projects, but it works for some :) >> >> >> >>> >> >>> Thanks >> >>> Sharan >> >>> >> >>> - >> >>> To unsubscribe, e-mail: dev-unsubscr...@community.apache.org >> >>> For additional commands, e-mail: dev-h...@community.apache.org >> >>> >> >> >> >> >> >> - >> >> To unsubscribe, e-mail: dev-unsubscr...@community.apache.org >> >> For additional commands, e-mail: dev-h...@community.apache.org >> >> >> >> >> > >> > - >> > To unsubscribe, e-mail: dev-unsubscr...@community.apache.org >> > For additional commands, e-mail: dev-h...@community.apache.org >> > >> >> >> - >> To unsubscribe, e-mail: dev-unsubscr...@community.apache.org >> For additional commands, e-mail: dev-h...@community.apache.org >> >>
Re: #LoveApache Project Stickers
Hi Sharan, How about these graphics for #LoveApache stickers? LMK if they work :) On Tue, Aug 13, 2019 at 1:19 PM Daniel Gruno wrote: > On 8/13/19 10:15 PM, Sharan Foga wrote: > > Hi Daniel > > > > Absolutely brilliant! I can pick up the beam and airflow ones that I > need from there. > > Airflow's logo has some serious padding on it that poses a problem. > Those should ideally be cut form the original svg first.. > > > > > Anyone else that wants them then please let me know. > > > > Thanks > > Sharan > > > > On 2019/08/13 20:02:24, Daniel Gruno wrote: > >> On 8/13/19 9:45 PM, Sharan Foga wrote: > >>> Hi All > >>> > >>> If you would like some #LoveApache versions of your project stickers > available at the ASF booth for Apachecon then please make sure that you > create the graphic based on the instructions below > >>> > >>> https://www.apache.org/foundation/press/kit/#loveapache > >>> > >>> and then send me the graphic so I can use it for the sticker order. > >> > >> There's an auto-generator that runs and spits out images at: > >> http://www.apache.org/logos/loveapache/ > >> > >> it uses the same defaults as the Powered-By generator, that is...if > >> there is an original called $project-pb.svg, it will use that one, > >> otherwise it will find the most round/square logo and use that. > >> > >> it's currently running round one, images slowly coming up... > >> they're not the best fit for all projects, but it works for some :) > >> > >>> > >>> Thanks > >>> Sharan > >>> > >>> - > >>> To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > >>> For additional commands, e-mail: dev-h...@community.apache.org > >>> > >> > >> > >> - > >> To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > >> For additional commands, e-mail: dev-h...@community.apache.org > >> > >> > > > > - > > To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > For additional commands, e-mail: dev-h...@community.apache.org > > > > > - > To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > For additional commands, e-mail: dev-h...@community.apache.org > > - To unsubscribe, e-mail: dev-unsubscr...@community.apache.org For additional commands, e-mail: dev-h...@community.apache.org
Re: #LoveApache Project Stickers
On 8/13/19 10:15 PM, Sharan Foga wrote: Hi Daniel Absolutely brilliant! I can pick up the beam and airflow ones that I need from there. Airflow's logo has some serious padding on it that poses a problem. Those should ideally be cut form the original svg first.. Anyone else that wants them then please let me know. Thanks Sharan On 2019/08/13 20:02:24, Daniel Gruno wrote: On 8/13/19 9:45 PM, Sharan Foga wrote: Hi All If you would like some #LoveApache versions of your project stickers available at the ASF booth for Apachecon then please make sure that you create the graphic based on the instructions below https://www.apache.org/foundation/press/kit/#loveapache and then send me the graphic so I can use it for the sticker order. There's an auto-generator that runs and spits out images at: http://www.apache.org/logos/loveapache/ it uses the same defaults as the Powered-By generator, that is...if there is an original called $project-pb.svg, it will use that one, otherwise it will find the most round/square logo and use that. it's currently running round one, images slowly coming up... they're not the best fit for all projects, but it works for some :) Thanks Sharan - To unsubscribe, e-mail: dev-unsubscr...@community.apache.org For additional commands, e-mail: dev-h...@community.apache.org - To unsubscribe, e-mail: dev-unsubscr...@community.apache.org For additional commands, e-mail: dev-h...@community.apache.org - To unsubscribe, e-mail: dev-unsubscr...@community.apache.org For additional commands, e-mail: dev-h...@community.apache.org - To unsubscribe, e-mail: dev-unsubscr...@community.apache.org For additional commands, e-mail: dev-h...@community.apache.org
Re: #LoveApache Project Stickers
Hi Sharan, I am preparing one for Airflow and Beam atm.. I will try to put the logos in the middle without text to see if they look prominent. Can you give me 20 min? Thank you :) On Tue, Aug 13, 2019 at 1:15 PM Sharan Foga wrote: > Hi Daniel > > Absolutely brilliant! I can pick up the beam and airflow ones that I need > from there. > > Anyone else that wants them then please let me know. > > Thanks > Sharan > > On 2019/08/13 20:02:24, Daniel Gruno wrote: > > On 8/13/19 9:45 PM, Sharan Foga wrote: > > > Hi All > > > > > > If you would like some #LoveApache versions of your project stickers > available at the ASF booth for Apachecon then please make sure that you > create the graphic based on the instructions below > > > > > > https://www.apache.org/foundation/press/kit/#loveapache > > > > > > and then send me the graphic so I can use it for the sticker order. > > > > There's an auto-generator that runs and spits out images at: > > http://www.apache.org/logos/loveapache/ > > > > it uses the same defaults as the Powered-By generator, that is...if > > there is an original called $project-pb.svg, it will use that one, > > otherwise it will find the most round/square logo and use that. > > > > it's currently running round one, images slowly coming up... > > they're not the best fit for all projects, but it works for some :) > > > > > > > > Thanks > > > Sharan > > > > > > - > > > To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > > For additional commands, e-mail: dev-h...@community.apache.org > > > > > > > > > - > > To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > For additional commands, e-mail: dev-h...@community.apache.org > > > > > > - > To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > For additional commands, e-mail: dev-h...@community.apache.org > >
Re: #LoveApache Project Stickers
Hi Daniel Absolutely brilliant! I can pick up the beam and airflow ones that I need from there. Anyone else that wants them then please let me know. Thanks Sharan On 2019/08/13 20:02:24, Daniel Gruno wrote: > On 8/13/19 9:45 PM, Sharan Foga wrote: > > Hi All > > > > If you would like some #LoveApache versions of your project stickers > > available at the ASF booth for Apachecon then please make sure that you > > create the graphic based on the instructions below > > > > https://www.apache.org/foundation/press/kit/#loveapache > > > > and then send me the graphic so I can use it for the sticker order. > > There's an auto-generator that runs and spits out images at: > http://www.apache.org/logos/loveapache/ > > it uses the same defaults as the Powered-By generator, that is...if > there is an original called $project-pb.svg, it will use that one, > otherwise it will find the most round/square logo and use that. > > it's currently running round one, images slowly coming up... > they're not the best fit for all projects, but it works for some :) > > > > > Thanks > > Sharan > > > > - > > To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > > For additional commands, e-mail: dev-h...@community.apache.org > > > > > - > To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > For additional commands, e-mail: dev-h...@community.apache.org > > - To unsubscribe, e-mail: dev-unsubscr...@community.apache.org For additional commands, e-mail: dev-h...@community.apache.org
Re: #LoveApache Project Stickers
Thank you Daniel, this is awesome! Am 13.08.19, 22:02 schrieb "Daniel Gruno" : On 8/13/19 9:45 PM, Sharan Foga wrote: > Hi All > > If you would like some #LoveApache versions of your project stickers available at the ASF booth for Apachecon then please make sure that you create the graphic based on the instructions below > > https://www.apache.org/foundation/press/kit/#loveapache > > and then send me the graphic so I can use it for the sticker order. There's an auto-generator that runs and spits out images at: http://www.apache.org/logos/loveapache/ it uses the same defaults as the Powered-By generator, that is...if there is an original called $project-pb.svg, it will use that one, otherwise it will find the most round/square logo and use that. it's currently running round one, images slowly coming up... they're not the best fit for all projects, but it works for some :) > > Thanks > Sharan > > - > To unsubscribe, e-mail: dev-unsubscr...@community.apache.org > For additional commands, e-mail: dev-h...@community.apache.org > - To unsubscribe, e-mail: dev-unsubscr...@community.apache.org For additional commands, e-mail: dev-h...@community.apache.org - To unsubscribe, e-mail: dev-unsubscr...@community.apache.org For additional commands, e-mail: dev-h...@community.apache.org
Re: #LoveApache Project Stickers
On 8/13/19 9:45 PM, Sharan Foga wrote: Hi All If you would like some #LoveApache versions of your project stickers available at the ASF booth for Apachecon then please make sure that you create the graphic based on the instructions below https://www.apache.org/foundation/press/kit/#loveapache and then send me the graphic so I can use it for the sticker order. There's an auto-generator that runs and spits out images at: http://www.apache.org/logos/loveapache/ it uses the same defaults as the Powered-By generator, that is...if there is an original called $project-pb.svg, it will use that one, otherwise it will find the most round/square logo and use that. it's currently running round one, images slowly coming up... they're not the best fit for all projects, but it works for some :) Thanks Sharan - To unsubscribe, e-mail: dev-unsubscr...@community.apache.org For additional commands, e-mail: dev-h...@community.apache.org - To unsubscribe, e-mail: dev-unsubscr...@community.apache.org For additional commands, e-mail: dev-h...@community.apache.org
#LoveApache Project Stickers
Hi All If you would like some #LoveApache versions of your project stickers available at the ASF booth for Apachecon then please make sure that you create the graphic based on the instructions below https://www.apache.org/foundation/press/kit/#loveapache and then send me the graphic so I can use it for the sticker order. Thanks Sharan - To unsubscribe, e-mail: dev-unsubscr...@community.apache.org For additional commands, e-mail: dev-h...@community.apache.org
