Re: Siemens M20 and Kannel
I've tried restarting it about 10 times and unfortunately it hasn't made any difference. Does it matter if the smsbox is or isn't running? no it doesn't matter. BTW, you won't be able to start smsbox without previously running bearerbox :) Stipe [EMAIL PROTECTED] --- Wapme Systems AG Münsterstr. 248 40470 Düsseldorf Tel: +49-211-74845-0 Fax: +49-211-74845-299 E-Mail: [EMAIL PROTECTED] Internet: http://www.wapme-systems.de --- wapme.net - wherever you are
Re: Siemens M20 and Kannel
really strange, we do use M20T What type of firmware do you have ? - Original Message - From: Ronan Derby [EMAIL PROTECTED] To: Kannel Developers [EMAIL PROTECTED] Sent: Thursday, October 18, 2001 5:00 PM Subject: Siemens M20 and Kannel Hi, I'm trying to get Kannel to use a Siemens M20. The M20 is plugged into COM1 and if I connect using minicom I can send AT commands to the M20, and can send and read SMS messages. In the kannel.conf file I have: group = smsc smsc = at modemtype = siemens device = /dev/ttyS0 pin = 2004 And I when I start up the bearerbox I get this: 2001-10-18 14:43:37 [0] INFO: Debug_lvl = -1, log_file = none, log_lvl = 0 2001-10-18 14:43:37 [0] INFO: Reading configuration from /etc/kannel/smskannel.conf 2001-10-18 14:43:37 [0] INFO: 2001-10-18 14:43:37 [0] INFO: Kannel bearerbox II version 1.0.3 starting 2001-10-18 14:43:37 [0] DEBUG: Started thread 1 (gw/bb_http.c:httpadmin_run) Command: ATE0 2001-10-18 14:43:37 [1] DEBUG: HTTP: Creating a new server socket 13000. 2001-10-18 14:43:47 [0] PANIC: Cannot start with SMSC connection failing Can anyone give me any pointers as to what I might be doing wrong? Regards, Ronan.
RE: Siemens M20 and Kannel
Its revision 4.4 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Alexei Sent: 18 October 2001 16:41 To: Kannel Developers Subject: Re: Siemens M20 and Kannel really strange, we do use M20T What type of firmware do you have ? - Original Message - From: Ronan Derby [EMAIL PROTECTED] To: Kannel Developers [EMAIL PROTECTED] Sent: Thursday, October 18, 2001 5:00 PM Subject: Siemens M20 and Kannel Hi, I'm trying to get Kannel to use a Siemens M20. The M20 is plugged into COM1 and if I connect using minicom I can send AT commands to the M20, and can send and read SMS messages. In the kannel.conf file I have: group = smsc smsc = at modemtype = siemens device = /dev/ttyS0 pin = 2004 And I when I start up the bearerbox I get this: 2001-10-18 14:43:37 [0] INFO: Debug_lvl = -1, log_file = none, log_lvl = 0 2001-10-18 14:43:37 [0] INFO: Reading configuration from /etc/kannel/smskannel.conf 2001-10-18 14:43:37 [0] INFO: 2001-10-18 14:43:37 [0] INFO: Kannel bearerbox II version 1.0.3 starting 2001-10-18 14:43:37 [0] DEBUG: Started thread 1 (gw/bb_http.c:httpadmin_run) Command: ATE0 2001-10-18 14:43:37 [1] DEBUG: HTTP: Creating a new server socket 13000. 2001-10-18 14:43:47 [0] PANIC: Cannot start with SMSC connection failing Can anyone give me any pointers as to what I might be doing wrong? Regards, Ronan.
Re: Siemens M20 and Kannel
I'm trying to get Kannel to use a Siemens M20. The M20 is plugged into COM1 and if I connect using minicom I can send AT commands to the M20, and can send and read SMS messages. In the kannel.conf file I have: group = smsc smsc = at modemtype = siemens device = /dev/ttyS0 pin = 2004 And I when I start up the bearerbox I get this: 2001-10-18 14:43:37 [0] INFO: Debug_lvl = -1, log_file = none, log_lvl = 0 2001-10-18 14:43:37 [0] INFO: Reading configuration from /etc/kannel/smskannel.conf 2001-10-18 14:43:37 [0] INFO: 2001-10-18 14:43:37 [0] INFO: Kannel bearerbox II version 1.0.3 starting 2001-10-18 14:43:37 [0] DEBUG: Started thread 1 (gw/bb_http.c:httpadmin_run) Command: ATE0 2001-10-18 14:43:37 [1] DEBUG: HTTP: Creating a new server socket 13000. 2001-10-18 14:43:47 [0] PANIC: Cannot start with SMSC connection failing Can anyone give me any pointers as to what I might be doing wrong? yes, this effect is known for GSM modems connected to serial com lines. I can't tell you exactly why Kannel does not get the hook to the device at once, but we also have to fire up bearerbox at least 2 times before it recognizes the device at a serial com line. Simply retry a second or third time in the shell and you should get a hook. Stipe [EMAIL PROTECTED] --- Wapme Systems AG Münsterstr. 248 40470 Düsseldorf Tel: +49-211-74845-0 Fax: +49-211-74845-299 E-Mail: [EMAIL PROTECTED] Internet: http://www.wapme-systems.de --- wapme.net - wherever you are
Re: Siemens M20 and Kannel
Ok. The first thing = upgrade it to 5.4 or later firmware. Than check your conf file and connection. Try with minicom. Here's my bearerbox log (latest CVS, AT) 2001-10-18 18:27:07 [0] DEBUG: Started thread 4 (gw/bb_boxc.c:smsboxc_run)2001-10-18 18:27:07 [0] DEBUG: AT: Command: AT2001-10-18 18:27:07 [0] DEBUG: Read from modem: 'OK'2001-10-18 18:27:07 [0] DEBUG: AT: Command: ATF2001-10-18 18:27:07 [0] DEBUG: Read from modem: 'OK'2001-10-18 18:27:07 [0] DEBUG: AT: Command: AT2001-10-18 18:27:08 [0] DEBUG: Read from modem: 'AT OK'2001-10-18 18:27:08 [0] DEBUG: AT: Command: ATE02001-10-18 18:27:08 [0] DEBUG: Read from modem: 'ATE0 OK'2001-10-18 18:27:08 [0] DEBUG: AT: Command: ATI2001-10-18 18:27:08 [0] DEBUG: Read from modem: 'SIEMENS M20 Revision: 5.4, 13.12.00 13:15 OK'2001-10-18 18:27:09 [0] DEBUG: AT: Command: ATI12001-10-18 18:27:09 [0] DEBUG: Read from modem: 'SIEMENS M20 Revision: 5.4, 13.12.00 13:15 OK'2001-10-18 18:27:10 [0] DEBUG: AT: Command: ATI22001-10-18 18:27:10 [0] DEBUG: Read from modem: 'SIEMENS M20 Revision: 5.4, 13.12.00 13:15 OK'2001-10-18 18:27:11 [0] DEBUG: AT: Command: ATI32001-10-18 18:27:11 [0] DEBUG: Read from modem: 'SIEMENS M20 Revision: 5.4, 13.12.00 13:15 OK'2001-10-18 18:27:12 [0] DEBUG: AT: Command: ATI42001-10-18 18:27:12 [0] DEBUG: Read from modem: 'SIEMENS M20 Revision: 5.4, 13.12.00 13:15 OK'2001-10-18 18:27:13 [0] DEBUG: AT: Command: AT+CPIN?2001-10-18 18:27:14 [0] DEBUG: Read from modem: '+CPIN: READY'2001-10-18 18:27:14 [0] DEBUG: AT: Command: AT+CMGF=02001-10-18 18:27:14 [0] DEBUG: Read from modem: 'OK'2001-10-18 18:27:15 [0] DEBUG: AT: Command: AT+CNMI=1,2,0,0,02001-10-18 18:27:15 [0] DEBUG: Read from modem: 'OK'2001-10-18 18:27:15 [0] INFO: AT SMSC successfully opened. - Original Message - From: "Ronan Derby" [EMAIL PROTECTED] To: "Kannel Developers" [EMAIL PROTECTED] Sent: Thursday, October 18, 2001 5:53 PM Subject: RE: Siemens M20 and Kannel Its revision 4.4 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Alexei Sent: 18 October 2001 16:41 To: Kannel Developers Subject: Re: Siemens M20 and Kannel really strange, we do use M20T What type of firmware do you have ? - Original Message - From: "Ronan Derby" [EMAIL PROTECTED] To: "Kannel Developers" [EMAIL PROTECTED] Sent: Thursday, October 18, 2001 5:00 PM Subject: Siemens M20 and KannelHi, I'm trying to get Kannel to use a Siemens M20. The M20 is plugged into COM1 and if I connect using minicom I can send AT commands to the M20, and can send and read SMS messages. In the kannel.conf file I have: group = smsc smsc = at modemtype = siemens device = /dev/ttyS0 pin = 2004 And I when I start up the bearerbox I get this: 2001-10-18 14:43:37 [0] INFO: Debug_lvl = -1, log_file = none, log_lvl = 0 2001-10-18 14:43:37 [0] INFO: Reading configuration from /etc/kannel/smskannel.conf 2001-10-18 14:43:37 [0] INFO: 2001-10-18 14:43:37 [0] INFO: Kannel bearerbox II version 1.0.3 starting 2001-10-18 14:43:37 [0] DEBUG: Started thread 1 (gw/bb_http.c:httpadmin_run) Command: ATE0 2001-10-18 14:43:37 [1] DEBUG: HTTP: Creating a new server socket 13000. 2001-10-18 14:43:47 [0] PANIC: Cannot start with SMSC connection failing Can anyone give me any pointers as to what I might be doing wrong? Regards, Ronan.
Re: Siemens M20 and Kannel
I have uploaded the upgrade software and some docs on siemens M20 to : www.pashkovsky.com/siemens/ In order to upgrade you will have to open the M20 terminal. The software works from Windows OS, so you will have to connect your M20 to some win98/2000 host. Detailed instructions are inside. - Original Message - From: Ronan Derby To: Alexei Sent: Thursday, October 18, 2001 6:39 PM Subject: RE: Siemens M20 and Kannel Where can I get the firmware upgrade, and whats involved in upgrading? -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of AlexeiSent: 18 October 2001 17:29To: Kannel DevelopersSubject: Re: Siemens M20 and Kannel Ok. The first thing = upgrade it to 5.4 or later firmware. Than check your conf file and connection. Try with minicom. Here's my bearerbox log (latest CVS, AT) 2001-10-18 18:27:07 [0] DEBUG: Started thread 4 (gw/bb_boxc.c:smsboxc_run)2001-10-18 18:27:07 [0] DEBUG: AT: Command: AT2001-10-18 18:27:07 [0] DEBUG: Read from modem: 'OK'2001-10-18 18:27:07 [0] DEBUG: AT: Command: ATF2001-10-18 18:27:07 [0] DEBUG: Read from modem: 'OK'2001-10-18 18:27:07 [0] DEBUG: AT: Command: AT2001-10-18 18:27:08 [0] DEBUG: Read from modem: 'AT OK'2001-10-18 18:27:08 [0] DEBUG: AT: Command: ATE02001-10-18 18:27:08 [0] DEBUG: Read from modem: 'ATE0 OK'2001-10-18 18:27:08 [0] DEBUG: AT: Command: ATI2001-10-18 18:27:08 [0] DEBUG: Read from modem: 'SIEMENS M20 Revision: 5.4, 13.12.00 13:15 OK'2001-10-18 18:27:09 [0] DEBUG: AT: Command: ATI12001-10-18 18:27:09 [0] DEBUG: Read from modem: 'SIEMENS M20 Revision: 5.4, 13.12.00 13:15 OK'2001-10-18 18:27:10 [0] DEBUG: AT: Command: ATI22001-10-18 18:27:10 [0] DEBUG: Read from modem: 'SIEMENS M20 Revision: 5.4, 13.12.00 13:15 OK'2001-10-18 18:27:11 [0] DEBUG: AT: Command: ATI32001-10-18 18:27:11 [0] DEBUG: Read from modem: 'SIEMENS M20 Revision: 5.4, 13.12.00 13:15 OK'2001-10-18 18:27:12 [0] DEBUG: AT: Command: ATI42001-10-18 18:27:12 [0] DEBUG: Read from modem: 'SIEMENS M20 Revision: 5.4, 13.12.00 13:15 OK'2001-10-18 18:27:13 [0] DEBUG: AT: Command: AT+CPIN?2001-10-18 18:27:14 [0] DEBUG: Read from modem: '+CPIN: READY'2001-10-18 18:27:14 [0] DEBUG: AT: Command: AT+CMGF=02001-10-18 18:27:14 [0] DEBUG: Read from modem: 'OK'2001-10-18 18:27:15 [0] DEBUG: AT: Command: AT+CNMI=1,2,0,0,02001-10-18 18:27:15 [0] DEBUG: Read from modem: 'OK'2001-10-18 18:27:15 [0] INFO: AT SMSC successfully opened. - Original Message - From: "Ronan Derby" [EMAIL PROTECTED] To: "Kannel Developers" [EMAIL PROTECTED] Sent: Thursday, October 18, 2001 5:53 PM Subject: RE: Siemens M20 and Kannel Its revision 4.4 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Alexei Sent: 18 October 2001 16:41 To: Kannel Developers Subject: Re: Siemens M20 and Kannel really strange, we do use M20T What type of firmware do you have ? - Original Message - From: "Ronan Derby" [EMAIL PROTECTED] To: "Kannel Developers" [EMAIL PROTECTED] Sent: Thursday, October 18, 2001 5:00 PM Subject: Siemens M20 and KannelHi, I'm trying to get Kannel to use a Siemens M20. The M20 is plugged into COM1 and if I connect using minicom I can send AT commands to the M20, and can send and read SMS messages. In the kannel.conf file I have: group = smsc smsc = at modemtype = siemens device = /dev/ttyS0 pin = 2004 And I when I start up the bearerbox I get this: 2001-10-18 14:43:37 [0] INFO: Debug_lvl = -1, log_file = none, log_lvl = 0 2001-10-18 14:43:37 [0] INFO: Reading configuration from /etc/kannel/smskannel.conf 2001-10-18 14:43:37 [0] INFO: 2001-10-18 14:43:37 [0] INFO: Kannel bearerbox II version 1.0.3 starting 2001-10-18 14:43:37 [0] DEBUG: Started thread 1 (gw/bb_http.c:httpadmin_run) Command: ATE0 2001-10-18 14:43:37 [1] DEBUG: HTTP: Creating a new server socket 13000. 2001-10-18 14:43:47 [0] PANIC: Cannot start with SMSC connection failing Can anyone give me any pointers as to what I might be doing wrong? Regards, Ronan.