RE: [e-smith-devinfo] Installing SG3 (was SG3)
This software comes without warranty. Use at your own risk. It should work for (4.x and 5.x servers) To install the SquidGuard Panel, you must access the server in console mode. This means plugging in a keyboard and mouse into the back of your server or you can also use SSH to remotely install the software as well. From the console mode, access the command prompt by holding down your ALT key and pressing F2. Log in as root press enter and type your system password when prompted. Enter these commands from the prompt: mkdir /sg3 cd /sg3 wget ftp://ftp.e-smith.com/pub/e-smith/contrib/TrevorOuellette/squidguard30.tar.g z tar -zxf squidguard30.tar.gz ./install.sh You will now have to reboot your server. You can do this from the command line console by typing in reboot and pressing enter. You will be able to access the interface from your server-manager. Trev. -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
Re: [e-smith-devinfo] Installing SG3 (was SG3)
- Original Message - From: Trevor Ouellette [EMAIL PROTECTED] To: Devinfo@Lists. E-Smith. Org [EMAIL PROTECTED] Sent: Wednesday, February 13, 2002 11:13 AM Subject: RE: [e-smith-devinfo] Installing SG3 (was SG3) This software comes without warranty. Use at your own risk. It should work for (4.x and 5.x servers) Tried it on a new installed 5.1.2 - did not work! a. Cannot access the content Filtering link - Page cannot be found! Security Password Remote access Local networks Content Filtering b. http://192.168.1.2/squidguard You are not authorized to view this page You might not have permission to view this directory or page using the credentials you supplied. A number of errors occured during installation. Will try to capture all meaasges for review. I guess its back to the drawing board on this one. Orville Carter NYC -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
RE: [e-smith-devinfo] Installing SG3 (was SG3)
Orville, 4.1.2 works perfectly with squidguard. Someone will have to make it SME5 compatible. I thought I had it, but if you want to publish the error messages to the devlist, someone with SME5 can take a look and make the appropriate changes. I would be happy to direct or help anyone who is interested in making the changes. But I don't have time to install and test every version of SME that comes out. Trev. -Original Message- From: Orville Carter [mailto:[EMAIL PROTECTED]] Sent: Wednesday, February 13, 2002 11:46 AM To: Trevor Ouellette; Devinfo@Lists. E-Smith. Org Subject: Re: [e-smith-devinfo] Installing SG3 (was SG3) - Original Message - To: Devinfo@Lists. E-Smith. Org [EMAIL PROTECTED] Sent: Wednesday, February 13, 2002 11:13 AM Subject: RE: [e-smith-devinfo] Installing SG3 (was SG3) This software comes without warranty. Use at your own risk. It should work for (4.x and 5.x servers) Tried it on a new installed 5.1.2 - did not work! a. Cannot access the content Filtering link - Page cannot be found! Security Password Remote access Local networks Content Filtering b. http://192.168.1.2/squidguard You are not authorized to view this page You might not have permission to view this directory or page using the credentials you supplied. A number of errors occured during installation. Will try to capture all meaasges for review. I guess its back to the drawing board on this one. Orville Carter NYC -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
Re: [e-smith-devinfo] Installing SG3 (was SG3)
Trevor, Everything seem to be ok up to this point. I have the complete list of messages if you need it. Some of the line below occured because this was a reinstall to see error messages. snip ... ... Server software version: 5.1.2 Installing web-panels for version 5.1.2... `variables/functions/SME5/squidguard' - `/etc/e-smith/web/functions/squidguard' ln: `/etc/e-smith/web/panels/manager/cgi-bin/squidguard': File exists ln: `/home/e-smith/squidguard/trusted': File exists ln: `/home/e-smith/squidguard/untrusted': File exists ln: `/var/log/squidGuard.log': File exists Initialize SquidGuard 3.0 Interface (this may take a while)... SquidGuard Filter Interface 3.0 Copyright (c) Trevor Ouellette, 2002 This program may be freely distributed and/or modified. downloading blacklist... http://ftp.ost.eltele.no/pub/www/proxy/squidGuard/contrib/blacklists.tar.gz ftp.ost.eltele.no: Host not found. tar (child): *: Cannot open: No such file or directory tar (child): Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors Installing Blacklist... cp: cannot stat `blacklists/*': No such file or directory Restarting Squid... Stopping squid: .[ OK ] Starting squid: [ OK ] Finished. SquidGuard Interface 3.0 Installation Complete. You may reboot your server now. snip - Original Message - From: Trevor Ouellette [EMAIL PROTECTED] To: Devinfo@Lists. E-Smith. Org [EMAIL PROTECTED] Sent: Wednesday, February 13, 2002 11:13 AM Subject: RE: [e-smith-devinfo] Installing SG3 (was SG3) This software comes without warranty. Use at your own risk. It should work for (4.x and 5.x servers) To install the SquidGuard Panel, you must access the server in console mode. This means plugging in a keyboard and mouse into the back of your server or you can also use SSH to remotely install the software as well. From the console mode, access the command prompt by holding down your ALT key and pressing F2. Log in as root press enter and type your system password when prompted. Enter these commands from the prompt: mkdir /sg3 cd /sg3 wget ftp://ftp.e-smith.com/pub/e-smith/contrib/TrevorOuellette/squidguard30.tar.g z tar -zxf squidguard30.tar.gz ./install.sh You will now have to reboot your server. You can do this from the command line console by typing in reboot and pressing enter. You will be able to access the interface from your server-manager. Trev. -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
RE: [e-smith-devinfo] Installing SG3 (was SG3)
Good, it detected your software OS version. Don't worry about the File exists error messages. The links already exist. However, the blacklist download script is having a few issues... that's interesting. The script is located at: /usr/local/squidGuard/supdate Orville, I just ran my supdate (to update blacklists) from the console and it worked fine. Try run the script from the command line. - /usr/local/squidGuard/supdate Trev. snip ... ... Server software version: 5.1.2 Installing web-panels for version 5.1.2... `variables/functions/SME5/squidguard' - `/etc/e-smith/web/functions/squidguard' ln: `/etc/e-smith/web/panels/manager/cgi-bin/squidguard': File exists ln: `/home/e-smith/squidguard/trusted': File exists ln: `/home/e-smith/squidguard/untrusted': File exists ln: `/var/log/squidGuard.log': File exists Initialize SquidGuard 3.0 Interface (this may take a while)... SquidGuard Filter Interface 3.0 This program may be freely distributed and/or modified. downloading blacklist... http://ftp.ost.eltele.no/pub/www/proxy/squidGuard/contrib/blacklis ts.tar.gz ftp.ost.eltele.no: Host not found. tar (child): *: Cannot open: No such file or directory tar (child): Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors Installing Blacklist... cp: cannot stat `blacklists/*': No such file or directory Restarting Squid... Stopping squid: .[ OK ] Starting squid: [ OK ] Finished. SquidGuard Interface 3.0 Installation Complete. You may reboot your server now. snip - Original Message - To: Devinfo@Lists. E-Smith. Org [EMAIL PROTECTED] Sent: Wednesday, February 13, 2002 11:13 AM Subject: RE: [e-smith-devinfo] Installing SG3 (was SG3) This software comes without warranty. Use at your own risk. It should work for (4.x and 5.x servers) To install the SquidGuard Panel, you must access the server in console mode. This means plugging in a keyboard and mouse into the back of your server or you can also use SSH to remotely install the software as well. From the console mode, access the command prompt by holding down your ALT key and pressing F2. Log in as root press enter and type your system password when prompted. Enter these commands from the prompt: mkdir /sg3 cd /sg3 wget ftp://ftp.e-smith.com/pub/e-smith/contrib/TrevorOuellette/squidgua rd30.tar.g z tar -zxf squidguard30.tar.gz ./install.sh You will now have to reboot your server. You can do this from the command line console by typing in reboot and pressing enter. You will be able to access the interface from your server-manager. Trev. -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
Re: [e-smith-devinfo] Installing SG3 (was SG3)
If I only had half a brain, I would be dangerous! Wow! Sometimes I dont know why they call me an engineer. Sheech! The port IP address is connected to my laptop - not to the test server. How the heck can I FTP if the test server is NOT connected to the internet! What am I, a Moron! Sorry Trevor. Really scared yuh there. ;-) All is well! Orville Carter (All washed Up in NYC) - Original Message - From: Trevor Ouellette [EMAIL PROTECTED] To: Orville Carter [EMAIL PROTECTED]; Devinfo@Lists. E-Smith. Org [EMAIL PROTECTED] Sent: Wednesday, February 13, 2002 2:01 PM Subject: RE: [e-smith-devinfo] Installing SG3 (was SG3) Good, it detected your software OS version. Don't worry about the File exists error messages. The links already exist. However, the blacklist download script is having a few issues... that's interesting. The script is located at: /usr/local/squidGuard/supdate Orville, I just ran my supdate (to update blacklists) from the console and it worked fine. Try run the script from the command line. - /usr/local/squidGuard/supdate Trev. snip ... ... Server software version: 5.1.2 Installing web-panels for version 5.1.2... `variables/functions/SME5/squidguard' - `/etc/e-smith/web/functions/squidguard' ln: `/etc/e-smith/web/panels/manager/cgi-bin/squidguard': File exists ln: `/home/e-smith/squidguard/trusted': File exists ln: `/home/e-smith/squidguard/untrusted': File exists ln: `/var/log/squidGuard.log': File exists Initialize SquidGuard 3.0 Interface (this may take a while)... SquidGuard Filter Interface 3.0 This program may be freely distributed and/or modified. downloading blacklist... http://ftp.ost.eltele.no/pub/www/proxy/squidGuard/contrib/blacklis ts.tar.gz ftp.ost.eltele.no: Host not found. tar (child): *: Cannot open: No such file or directory tar (child): Error is not recoverable: exiting now tar: Child returned status 2 tar: Error exit delayed from previous errors Installing Blacklist... cp: cannot stat `blacklists/*': No such file or directory Restarting Squid... Stopping squid: .[ OK ] Starting squid: [ OK ] Finished. SquidGuard Interface 3.0 Installation Complete. You may reboot your server now. snip - Original Message - To: Devinfo@Lists. E-Smith. Org [EMAIL PROTECTED] Sent: Wednesday, February 13, 2002 11:13 AM Subject: RE: [e-smith-devinfo] Installing SG3 (was SG3) This software comes without warranty. Use at your own risk. It should work for (4.x and 5.x servers) To install the SquidGuard Panel, you must access the server in console mode. This means plugging in a keyboard and mouse into the back of your server or you can also use SSH to remotely install the software as well. From the console mode, access the command prompt by holding down your ALT key and pressing F2. Log in as root press enter and type your system password when prompted. Enter these commands from the prompt: mkdir /sg3 cd /sg3 wget ftp://ftp.e-smith.com/pub/e-smith/contrib/TrevorOuellette/squidgua rd30.tar.g z tar -zxf squidguard30.tar.gz ./install.sh You will now have to reboot your server. You can do this from the command line console by typing in reboot and pressing enter. You will be able to access the interface from your server-manager. Trev. -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
RE: [e-smith-devinfo] Installing SG3 (was SG3)
Glad to hear that you are up and running. Trev. If I only had half a brain, I would be dangerous! Wow! Sometimes I dont know why they call me an engineer. Sheech! The port IP address is connected to my laptop - not to the test server. How the heck can I FTP if the test server is NOT connected to the internet! -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
RE: [e-smith-devinfo] Installing SG3 (was SG3)
I just installed Squidguard3 and it works great. The only thing that does not work is the server manager the content filtering will fail. I can modified with login at the 192.168.1.1/squidguard. You even change the color to blue to match Mitel screen and added new features Thank You -- jose velez -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
RE: [e-smith-devinfo] Installing SG3 (was SG3)
Hi Jose, This is the /etc/e-smith/web/functions/squidguard file that you modified right? That's good. Yes, some new features have been added (log, blacklist location, etc.). As far as the color goes... I just happen to like the color blue. It is nicer to look at then gray and it is just a coincidence that our color scheme's are both the same. Send me your /etc/e-smith/web/functions/squidguard file when you have a chance, Jose. I will update my installation when I have some time. It really is suppose to auto-detect versions and install the correct panel. Trev. -Original Message- From: jose velez [mailto:[EMAIL PROTECTED]] Sent: Wednesday, February 13, 2002 3:55 PM To: Trevor Ouellette; Devinfo@Lists. E-Smith. Org Subject: RE: [e-smith-devinfo] Installing SG3 (was SG3) I just installed Squidguard3 and it works great. The only thing that does not work is the server manager the content filtering will fail. I can modified with login at the 192.168.1.1/squidguard. You even change the color to blue to match Mitel screen and added new features Thank You -- jose velez -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org
