Re: [digitalradio] Re: Yaesu FT-690
Thank you. From: jon_g4fut Sent: Tuesday, July 20, 2010 4:22 PM To: digitalradio@yahoogroups.com Subject: [digitalradio] Re: Yaesu FT-690 Rudi, No kicking from me...instead I'll defend you for the excellent information you sent... :-) Cheers Jon --- In digitalradio@yahoogroups.com, "Rudy Benner" wrote: > > Well, I think that is correct, but I seem to be getting my butt kicked all > day, so I decided to send you enough data to figure it out and come out > smelling rosy for a change. I think I get the Bonehead Award today. Don't > forget that you will need a cable for the receive, that part is easy. > > If you are going to kick me, please take a number and line up. No pushing. > > > From: jon_g4fut > Sent: Tuesday, July 20, 2010 1:45 PM > To: digitalradio@yahoogroups.com > Subject: [digitalradio] Re: Yaesu FT-690 > > > > Rudy, > I pressed the SEND button too soonfrom the list you kindly posted will > this cable SLCAB8R ...be the correct one for the connection from the > Signalink to the Yaesus 8 pin mike socket? > Regards > again > Jon > > --- In digitalradio@yahoogroups.com, "jon_g4fut" wrote: > > > > Thanks Rudy, > > Yes, I am very happy with Signalink, I use one with my ICOM 718 for data so > > wish to move onto 6 metres now > > Regards > > Jon > > > > > > --- In digitalradio@yahoogroups.com, "Rudy Benner" benner@ wrote: > > > > > > Part Numbers & Options: > > > SignaLink USB Part Numbers (please specify when ordering): > > > > > > a.. SLUSB4R - For 4-Pin Round Mic Connector > > > b.. SLUSB8R - For 8-Pin Round Mic Connector > > > c.. SLUSBRJ1 - For RJ-11 Mic Connector > > > d.. SLUSBRJ4 - For RJ-45 Mic Connector > > > > > > e.. SLUSB5PD - For 5-pin DIN Data / Accessory Port Connector > > > f.. SLUSB8PD - For 8-pin DIN Data / Accessory Port Connector > > > g.. SLUSB13I - For ICOM 13-pin DIN Accessory Port Connector > > > h.. SLUSB13K - For Kenwood 13-pin DIN Accessory Port Connector > > > i.. SLUSB6PM - For 6-pin mini DIN Data / Accessory Port Connector > > > j.. SLUSBK3 - For the Elecraft K3's rear panel Audio In/Out & PTT jacks > > > > > > k.. SLUSBNC - Un-terminated cable (bare wires on radio end) for building > > > your own cable > > > Extra Radio Cables: > > > > > > a.. SLCAB4R - For 4-Pin Round Mic Connector > > > b.. SLCAB8R - For 8-Pin Round Mic Connector > > > c.. SLCABRJ1 - For RJ-11 Mic Connector > > > d.. SLCABRJ4 - For RJ-45 Mic Connector > > > > > > e.. SLCAB5PD - For 5-Pin DIN Data / Accessory Port Connector > > > f.. SLCAB8PD - For 8-Pin DIN Data / Accessory Port Connector > > > g.. SLCAB13I - For ICOM 13-Pin DIN Accessory Port Connector > > > h.. SLCAB13K - For Kenwood 13-Pin DIN Accessory Port Connector > > > i.. SLCAB6PM - For 6-Pin mini DIN Data / Accessory Port Connector > > > j.. SLCABK3 - For the Elecraft K3's rear panel Audio In/Out & PTT jacks > > > > > > k.. SLCABNC - Un-terminated cable (bare wires on radio end) for building > > > your own cable > > > Accessories: > > > > > > a.. Plug & Play Jumper Modules - Click here for part numbers and radios > > > supported > > > b.. SLHEAD - SignaLink Programming Header for wiring your own jumper > > > module > > > The instructions will include details on the jumpers. You will need a > > > cable to go from the Signalink USB to the headphone jack also. > > > > > > I own 2 Signalink USB s and am very happy with them. > > > > > > > > > From: jon_g4fut > > > Sent: Tuesday, July 20, 2010 12:44 PM > > > To: digitalradio@yahoogroups.com > > > Subject: [digitalradio] Yaesu FT-690 > > > > > > > > > > > > Does anyone use the FT 690 for 50Mhz digital? Especially with the > > > Signalink. If so I'd like to know the equipment number of the connecting > > > serial cable which attaches both these units. > > > Jon G4FUT > > > > > > > > > > > > > > > > > > > > > -- > > > > > > > > > > > > No virus found in this incoming message. > > > Checked by AVG - www.avg.com > > > Version: 9.0.839 / Virus Database: 271.1.1/3017 - Release Date: 07/20/10 > > > 02:36:00 > > > > > > > > > > > -- > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.839 / Virus Database: 271.1.1/3017 - Release Date: 07/20/10 > 02:36:00 > No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.839 / Virus Database: 271.1.1/3018 - Release Date: 07/20/10 14:36:00
[digitalradio] Re: Yaesu FT-690
Rudi, No kicking from me...instead I'll defend you for the excellent information you sent... :-) Cheers Jon --- In digitalradio@yahoogroups.com, "Rudy Benner" wrote: > > Well, I think that is correct, but I seem to be getting my butt kicked all > day, so I decided to send you enough data to figure it out and come out > smelling rosy for a change. I think I get the Bonehead Award today. Don't > forget that you will need a cable for the receive, that part is easy. > > If you are going to kick me, please take a number and line up. No pushing. > > > From: jon_g4fut > Sent: Tuesday, July 20, 2010 1:45 PM > To: digitalradio@yahoogroups.com > Subject: [digitalradio] Re: Yaesu FT-690 > > > > Rudy, > I pressed the SEND button too soonfrom the list you kindly posted will > this cable SLCAB8R ...be the correct one for the connection from the > Signalink to the Yaesus 8 pin mike socket? > Regards > again > Jon > > --- In digitalradio@yahoogroups.com, "jon_g4fut" wrote: > > > > Thanks Rudy, > > Yes, I am very happy with Signalink, I use one with my ICOM 718 for data so > > wish to move onto 6 metres now > > Regards > > Jon > > > > > > --- In digitalradio@yahoogroups.com, "Rudy Benner" benner@ wrote: > > > > > > Part Numbers & Options: > > > SignaLink USB Part Numbers (please specify when ordering): > > > > > > a.. SLUSB4R - For 4-Pin Round Mic Connector > > > b.. SLUSB8R - For 8-Pin Round Mic Connector > > > c.. SLUSBRJ1 - For RJ-11 Mic Connector > > > d.. SLUSBRJ4 - For RJ-45 Mic Connector > > > > > > e.. SLUSB5PD - For 5-pin DIN Data / Accessory Port Connector > > > f.. SLUSB8PD - For 8-pin DIN Data / Accessory Port Connector > > > g.. SLUSB13I - For ICOM 13-pin DIN Accessory Port Connector > > > h.. SLUSB13K - For Kenwood 13-pin DIN Accessory Port Connector > > > i.. SLUSB6PM - For 6-pin mini DIN Data / Accessory Port Connector > > > j.. SLUSBK3 - For the Elecraft K3's rear panel Audio In/Out & PTT jacks > > > > > > k.. SLUSBNC - Un-terminated cable (bare wires on radio end) for building > > > your own cable > > > Extra Radio Cables: > > > > > > a.. SLCAB4R - For 4-Pin Round Mic Connector > > > b.. SLCAB8R - For 8-Pin Round Mic Connector > > > c.. SLCABRJ1 - For RJ-11 Mic Connector > > > d.. SLCABRJ4 - For RJ-45 Mic Connector > > > > > > e.. SLCAB5PD - For 5-Pin DIN Data / Accessory Port Connector > > > f.. SLCAB8PD - For 8-Pin DIN Data / Accessory Port Connector > > > g.. SLCAB13I - For ICOM 13-Pin DIN Accessory Port Connector > > > h.. SLCAB13K - For Kenwood 13-Pin DIN Accessory Port Connector > > > i.. SLCAB6PM - For 6-Pin mini DIN Data / Accessory Port Connector > > > j.. SLCABK3 - For the Elecraft K3's rear panel Audio In/Out & PTT jacks > > > > > > k.. SLCABNC - Un-terminated cable (bare wires on radio end) for building > > > your own cable > > > Accessories: > > > > > > a.. Plug & Play Jumper Modules - Click here for part numbers and radios > > > supported > > > b.. SLHEAD - SignaLink Programming Header for wiring your own jumper > > > module > > > The instructions will include details on the jumpers. You will need a > > > cable to go from the Signalink USB to the headphone jack also. > > > > > > I own 2 Signalink USB s and am very happy with them. > > > > > > > > > From: jon_g4fut > > > Sent: Tuesday, July 20, 2010 12:44 PM > > > To: digitalradio@yahoogroups.com > > > Subject: [digitalradio] Yaesu FT-690 > > > > > > > > > > > > Does anyone use the FT 690 for 50Mhz digital? Especially with the > > > Signalink. If so I'd like to know the equipment number of the connecting > > > serial cable which attaches both these units. > > > Jon G4FUT > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > No virus found in this incoming message. > > > Checked by AVG - www.avg.com > > > Version: 9.0.839 / Virus Database: 271.1.1/3017 - Release Date: 07/20/10 > > > 02:36:00 > > > > > > > > > > > > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.839 / Virus Database: 271.1.1/3017 - Release Date: 07/20/10 > 02:36:00 >
Re: [digitalradio] Re: Yaesu FT-690
Well, I think that is correct, but I seem to be getting my butt kicked all day, so I decided to send you enough data to figure it out and come out smelling rosy for a change. I think I get the Bonehead Award today. Don't forget that you will need a cable for the receive, that part is easy. If you are going to kick me, please take a number and line up. No pushing. From: jon_g4fut Sent: Tuesday, July 20, 2010 1:45 PM To: digitalradio@yahoogroups.com Subject: [digitalradio] Re: Yaesu FT-690 Rudy, I pressed the SEND button too soonfrom the list you kindly posted will this cable SLCAB8R ...be the correct one for the connection from the Signalink to the Yaesus 8 pin mike socket? Regards again Jon --- In digitalradio@yahoogroups.com, "jon_g4fut" wrote: > > Thanks Rudy, > Yes, I am very happy with Signalink, I use one with my ICOM 718 for data so > wish to move onto 6 metres now > Regards > Jon > > > --- In digitalradio@yahoogroups.com, "Rudy Benner" benner@ wrote: > > > > Part Numbers & Options: > > SignaLink USB Part Numbers (please specify when ordering): > > > > a.. SLUSB4R - For 4-Pin Round Mic Connector > > b.. SLUSB8R - For 8-Pin Round Mic Connector > > c.. SLUSBRJ1 - For RJ-11 Mic Connector > > d.. SLUSBRJ4 - For RJ-45 Mic Connector > > > > e.. SLUSB5PD - For 5-pin DIN Data / Accessory Port Connector > > f.. SLUSB8PD - For 8-pin DIN Data / Accessory Port Connector > > g.. SLUSB13I - For ICOM 13-pin DIN Accessory Port Connector > > h.. SLUSB13K - For Kenwood 13-pin DIN Accessory Port Connector > > i.. SLUSB6PM - For 6-pin mini DIN Data / Accessory Port Connector > > j.. SLUSBK3 - For the Elecraft K3's rear panel Audio In/Out & PTT jacks > > > > k.. SLUSBNC - Un-terminated cable (bare wires on radio end) for building > > your own cable > > Extra Radio Cables: > > > > a.. SLCAB4R - For 4-Pin Round Mic Connector > > b.. SLCAB8R - For 8-Pin Round Mic Connector > > c.. SLCABRJ1 - For RJ-11 Mic Connector > > d.. SLCABRJ4 - For RJ-45 Mic Connector > > > > e.. SLCAB5PD - For 5-Pin DIN Data / Accessory Port Connector > > f.. SLCAB8PD - For 8-Pin DIN Data / Accessory Port Connector > > g.. SLCAB13I - For ICOM 13-Pin DIN Accessory Port Connector > > h.. SLCAB13K - For Kenwood 13-Pin DIN Accessory Port Connector > > i.. SLCAB6PM - For 6-Pin mini DIN Data / Accessory Port Connector > > j.. SLCABK3 - For the Elecraft K3's rear panel Audio In/Out & PTT jacks > > > > k.. SLCABNC - Un-terminated cable (bare wires on radio end) for building > > your own cable > > Accessories: > > > > a.. Plug & Play Jumper Modules - Click here for part numbers and radios > > supported > > b.. SLHEAD - SignaLink Programming Header for wiring your own jumper module > > The instructions will include details on the jumpers. You will need a cable > > to go from the Signalink USB to the headphone jack also. > > > > I own 2 Signalink USB s and am very happy with them. > > > > > > From: jon_g4fut > > Sent: Tuesday, July 20, 2010 12:44 PM > > To: digitalradio@yahoogroups.com > > Subject: [digitalradio] Yaesu FT-690 > > > > > > > > Does anyone use the FT 690 for 50Mhz digital? Especially with the > > Signalink. If so I'd like to know the equipment number of the connecting > > serial cable which attaches both these units. > > Jon G4FUT > > > > > > > > > > > > > > > > > > > > > > No virus found in this incoming message. > > Checked by AVG - www.avg.com > > Version: 9.0.839 / Virus Database: 271.1.1/3017 - Release Date: 07/20/10 > > 02:36:00 > > > No virus found in this incoming message. Checked by AVG - www.avg.com Version: 9.0.839 / Virus Database: 271.1.1/3017 - Release Date: 07/20/10 02:36:00
[digitalradio] Re: Yaesu FT-690
Rudy, I pressed the SEND button too soonfrom the list you kindly posted will this cable SLCAB8R ...be the correct one for the connection from the Signalink to the Yaesus 8 pin mike socket? Regards again Jon --- In digitalradio@yahoogroups.com, "jon_g4fut" wrote: > > Thanks Rudy, > Yes, I am very happy with Signalink, I use one with my ICOM 718 for data so wish to move onto 6 metres now > Regards > Jon > > > --- In digitalradio@yahoogroups.com, "Rudy Benner" benner@ wrote: > > > > Part Numbers & Options: > > SignaLink USB Part Numbers (please specify when ordering): > > > > a.. SLUSB4R - For 4-Pin Round Mic Connector > > b.. SLUSB8R - For 8-Pin Round Mic Connector > > c.. SLUSBRJ1 - For RJ-11 Mic Connector > > d.. SLUSBRJ4 - For RJ-45 Mic Connector > > > > e.. SLUSB5PD - For 5-pin DIN Data / Accessory Port Connector > > f.. SLUSB8PD - For 8-pin DIN Data / Accessory Port Connector > > g.. SLUSB13I - For ICOM 13-pin DIN Accessory Port Connector > > h.. SLUSB13K - For Kenwood 13-pin DIN Accessory Port Connector > > i.. SLUSB6PM - For 6-pin mini DIN Data / Accessory Port Connector > > j.. SLUSBK3 - For the Elecraft K3's rear panel Audio In/Out & PTT jacks > > > > k.. SLUSBNC - Un-terminated cable (bare wires on radio end) for building your own cable > > Extra Radio Cables: > > > > a.. SLCAB4R - For 4-Pin Round Mic Connector > > b.. SLCAB8R - For 8-Pin Round Mic Connector > > c.. SLCABRJ1 - For RJ-11 Mic Connector > > d.. SLCABRJ4 - For RJ-45 Mic Connector > > > > e.. SLCAB5PD - For 5-Pin DIN Data / Accessory Port Connector > > f.. SLCAB8PD - For 8-Pin DIN Data / Accessory Port Connector > > g.. SLCAB13I - For ICOM 13-Pin DIN Accessory Port Connector > > h.. SLCAB13K - For Kenwood 13-Pin DIN Accessory Port Connector > > i.. SLCAB6PM - For 6-Pin mini DIN Data / Accessory Port Connector > > j.. SLCABK3 - For the Elecraft K3's rear panel Audio In/Out & PTT jacks > > > > k.. SLCABNC - Un-terminated cable (bare wires on radio end) for building your own cable > > Accessories: > > > > a.. Plug & Play Jumper Modules - Click here for part numbers and radios supported > > b.. SLHEAD - SignaLink Programming Header for wiring your own jumper module > > The instructions will include details on the jumpers. You will need a cable to go from the Signalink USB to the headphone jack also. > > > > I own 2 Signalink USB s and am very happy with them. > > > > > > From: jon_g4fut > > Sent: Tuesday, July 20, 2010 12:44 PM > > To: digitalradio@yahoogroups.com > > Subject: [digitalradio] Yaesu FT-690 > > > > > > > > Does anyone use the FT 690 for 50Mhz digital? Especially with the Signalink. If so I'd like to know the equipment number of the connecting serial cable which attaches both these units. > > Jon G4FUT > > > > > > > > > > > > > > \ > > > > > > > > No virus found in this incoming message. > > Checked by AVG - www.avg.com > > Version: 9.0.839 / Virus Database: 271.1.1/3017 - Release Date: 07/20/10 02:36:00 > > >
[digitalradio] Re: Yaesu FT-690
Thanks Rudy, Yes, I am very happy with Signalink, I use one with my ICOM 718 for data so wish to move onto 6 metres now Regards Jon --- In digitalradio@yahoogroups.com, "Rudy Benner" wrote: > > Part Numbers & Options: > SignaLink USB Part Numbers (please specify when ordering): > > a.. SLUSB4R - For 4-Pin Round Mic Connector > b.. SLUSB8R - For 8-Pin Round Mic Connector > c.. SLUSBRJ1 - For RJ-11 Mic Connector > d.. SLUSBRJ4 - For RJ-45 Mic Connector > > e.. SLUSB5PD - For 5-pin DIN Data / Accessory Port Connector > f.. SLUSB8PD - For 8-pin DIN Data / Accessory Port Connector > g.. SLUSB13I - For ICOM 13-pin DIN Accessory Port Connector > h.. SLUSB13K - For Kenwood 13-pin DIN Accessory Port Connector > i.. SLUSB6PM - For 6-pin mini DIN Data / Accessory Port Connector > j.. SLUSBK3 - For the Elecraft K3's rear panel Audio In/Out & PTT jacks > > k.. SLUSBNC - Un-terminated cable (bare wires on radio end) for building > your own cable > Extra Radio Cables: > > a.. SLCAB4R - For 4-Pin Round Mic Connector > b.. SLCAB8R - For 8-Pin Round Mic Connector > c.. SLCABRJ1 - For RJ-11 Mic Connector > d.. SLCABRJ4 - For RJ-45 Mic Connector > > e.. SLCAB5PD - For 5-Pin DIN Data / Accessory Port Connector > f.. SLCAB8PD - For 8-Pin DIN Data / Accessory Port Connector > g.. SLCAB13I - For ICOM 13-Pin DIN Accessory Port Connector > h.. SLCAB13K - For Kenwood 13-Pin DIN Accessory Port Connector > i.. SLCAB6PM - For 6-Pin mini DIN Data / Accessory Port Connector > j.. SLCABK3 - For the Elecraft K3's rear panel Audio In/Out & PTT jacks > > k.. SLCABNC - Un-terminated cable (bare wires on radio end) for building > your own cable > Accessories: > > a.. Plug & Play Jumper Modules - Click here for part numbers and radios > supported > b.. SLHEAD - SignaLink Programming Header for wiring your own jumper module > The instructions will include details on the jumpers. You will need a cable > to go from the Signalink USB to the headphone jack also. > > I own 2 Signalink USB s and am very happy with them. > > > From: jon_g4fut > Sent: Tuesday, July 20, 2010 12:44 PM > To: digitalradio@yahoogroups.com > Subject: [digitalradio] Yaesu FT-690 > > > > Does anyone use the FT 690 for 50Mhz digital? Especially with the Signalink. > If so I'd like to know the equipment number of the connecting serial cable > which attaches both these units. > Jon G4FUT > > > > > > > > > > > No virus found in this incoming message. > Checked by AVG - www.avg.com > Version: 9.0.839 / Virus Database: 271.1.1/3017 - Release Date: 07/20/10 > 02:36:00 >
