Re: [OSGeo-Discuss] Generating html clickable image maps from polygons
Thanks to all who replied. This is great to learn many open source software can do it. We'll definitely use one of them. For the benefits of the community, I published a short summary of the findings on Slashgeo: http://slashgeo.org/article.pl?sid=09/01/07/1828208 Slashgeo regularly covers OSGeo software, with 35,000 daily hits and thousands of unique IP addresses reached every day, it can only help open source geospatial software get even more publicity. Cheers, Alex -- Alexandre Leroux, M.Sc., Ing. Environnement Canada / Environment Canada Centre météorologique canadien / Canadian Meteorological Centre Section de la réponse aux urgences environnementales / Environmental Emergency Response Section alexandre.ler...@ec.gc.ca On 01/05/09 16:26, Steve Lime wrote: For completeness, MapServer can generate them two ways, using the image map driver David mentions and using templated query outputs. Here's an example that has 3 of 'em... http://www.dnr.state.mn.us/ecs/index.html Steve On 1/5/2009 at 3:13 PM, in message <6246727221874a4fb8d3f9bbc37d9bd5056da...@s-sp22.pca.state.mn.us>, "Fawcett, David" wrote: Alex, You can use MapServer to generate imagemaps. See http://mapserver.org/output/imagemaps.html David. -Original Message- From: discuss-boun...@lists.osgeo.org [mailto:discuss-boun...@lists.osgeo.org] On Behalf Of Alexandre Leroux Sent: Monday, January 05, 2009 2:37 PM To: OSGeo Discussions Subject: [OSGeo-Discuss] Generating html clickable image maps from polygons Hi list, A rather technical question. I was able to find a potential solution with GRASS GIS, but want to know if there are other solutions involving FOSS4G software. Which other FOSS4G software can generate html clickable image maps out of polygons? The challenge is simple: a colleague has many polygons that must be exported to several clickable PNGs like the example on this page: http://www.weatheroffice.gc.ca/warnings/sqc_e.html (A webmap tool such as OpenLayers would be much more powerful, but in some cases we do need clickable PNGs.) I found out it seems GRASS GIS 6.3+ can do it via its HTMLMAP driver: http://www.phygeo.uni-hannover.de/grass/grass63/manuals/html63_user/htmlmapdri ver.html Can any other OSGeo software do the same? Thanks for any reply! Alex ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss
Re: [OSGeo-Discuss] Generating html clickable image maps from polygons
Mapserver as well: http://www.mapserver.org/output/imagemaps.html Best regards, Bart > Alexandre Leroux ha scritto: >> I found out it seems GRASS GIS 6.3+ can do it via its HTMLMAP driver: >> http://www.phygeo.uni-hannover.de/grass/grass63/manuals/html63_user/htmlmapdriver.html >> >> Can any other OSGeo software do the same? > > Hi. > QGIS has a plugin that produces html clickable maps: > http://www.duif.net/qgis/ > All the best. > pc > -- > Paolo Cavallini: http://faunalia.it/pc > ___ > Discuss mailing list > Discuss@lists.osgeo.org > http://lists.osgeo.org/mailman/listinfo/discuss > ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss
Re: [OSGeo-Discuss] Generating html clickable image maps from polygons
Alexandre Leroux ha scritto: > I found out it seems GRASS GIS 6.3+ can do it via its HTMLMAP driver: > http://www.phygeo.uni-hannover.de/grass/grass63/manuals/html63_user/htmlmapdriver.html > > Can any other OSGeo software do the same? Hi. QGIS has a plugin that produces html clickable maps: http://www.duif.net/qgis/ All the best. pc -- Paolo Cavallini: http://faunalia.it/pc ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss
Re: [OSGeo-Discuss] Generating html clickable image maps from polygons
Someone recently contributed an html imagemap module for GeoServer. http://geoserver.org/display/GEOS/HTML+ImageMap+support An example of it in action here: http://geo.openplans.org/states.html -Justin Alexandre Leroux wrote: Hi list, A rather technical question. I was able to find a potential solution with GRASS GIS, but want to know if there are other solutions involving FOSS4G software. Which other FOSS4G software can generate html clickable image maps out of polygons? The challenge is simple: a colleague has many polygons that must be exported to several clickable PNGs like the example on this page: http://www.weatheroffice.gc.ca/warnings/sqc_e.html (A webmap tool such as OpenLayers would be much more powerful, but in some cases we do need clickable PNGs.) I found out it seems GRASS GIS 6.3+ can do it via its HTMLMAP driver: http://www.phygeo.uni-hannover.de/grass/grass63/manuals/html63_user/htmlmapdriver.html Can any other OSGeo software do the same? Thanks for any reply! Alex -- Justin Deoliveira OpenGeo - http://opengeo.org Enterprise support for open source geospatial. ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss
RE: [OSGeo-Discuss] Generating html clickable image maps from polygons
For completeness, MapServer can generate them two ways, using the image map driver David mentions and using templated query outputs. Here's an example that has 3 of 'em... http://www.dnr.state.mn.us/ecs/index.html Steve >>> On 1/5/2009 at 3:13 PM, in message <6246727221874a4fb8d3f9bbc37d9bd5056da...@s-sp22.pca.state.mn.us>, "Fawcett, David" wrote: > Alex, > > You can use MapServer to generate imagemaps. See > http://mapserver.org/output/imagemaps.html > > David. > > -Original Message- > From: discuss-boun...@lists.osgeo.org > [mailto:discuss-boun...@lists.osgeo.org] > On Behalf Of Alexandre Leroux > Sent: Monday, January 05, 2009 2:37 PM > To: OSGeo Discussions > Subject: [OSGeo-Discuss] Generating html clickable image maps from polygons > > > > Hi list, > > A rather technical question. I was able to find a potential solution > with GRASS GIS, but want to know if there are other solutions involving > FOSS4G software. > > Which other FOSS4G software can generate html clickable image maps out > of polygons? The challenge is simple: a colleague has many polygons that > must be exported to several clickable PNGs like the example on this > page: http://www.weatheroffice.gc.ca/warnings/sqc_e.html > (A webmap tool such as OpenLayers would be much more powerful, but in > some cases we do need clickable PNGs.) > > I found out it seems GRASS GIS 6.3+ can do it via its HTMLMAP driver: > http://www.phygeo.uni-hannover.de/grass/grass63/manuals/html63_user/htmlmapdri > > ver.html > Can any other OSGeo software do the same? > > > Thanks for any reply! > > Alex ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss
Re: [OSGeo-Discuss] Generating html clickable image maps from polygons
MapServer can do this via Templates. We use it in our GISmo (GeoMoose) interface quite a bit for Popups. you can see it action here: http://gis.ci.stpaul.mn.us/gis/gismo_public/html/ Just zoom in a ways, a couple of blocks, turn on the Address Point layer, and then switch to the "Visible Layers" tab, and make the Address layer imagemap active, it should be highlighted in Blue in the right hand control panel if you have zoomed in enough on the map. Just toggle it on and mouse over the Address Points. If you want the technical peak at things, here is the imagemap output call from Mapserver (that GeoMoose builds): http://gis.ci.stpaul.mn.us/datasets/DB/SAINT_PAUL/PUBLIC_WORKS/ADDRESS/STAMP-active_public.map?mapext=587340.1267982177%20162002.83410579615%20588032.8548504771%20162477.73387889678&mapsize=1218%20835&mode=nquery&searchmap=true The above link generates a Imagemap (only) fragment for use by GeoMoose. MapServer builds it based on Templates, as described in the MapServer docs in someone else's reply. bobb >>> Alexandre Leroux 01/05/09 3:07 PM >>> Hi list, A rather technical question. I was able to find a potential solution with GRASS GIS, but want to know if there are other solutions involving FOSS4G software. Which other FOSS4G software can generate html clickable image maps out of polygons? The challenge is simple: a colleague has many polygons that must be exported to several clickable PNGs like the example on this page: http://www.weatheroffice.gc.ca/warnings/sqc_e.html (A webmap tool such as OpenLayers would be much more powerful, but in some cases we do need clickable PNGs.) I found out it seems GRASS GIS 6.3+ can do it via its HTMLMAP driver: http://www.phygeo.uni-hannover.de/grass/grass63/manuals/html63_user/htmlmapdriver.html Can any other OSGeo software do the same? Thanks for any reply! Alex -- Alexandre Leroux, M.Sc., Ing. Environnement Canada / Environment Canada Centre météorologique canadien / Canadian Meteorological Centre Section de la réponse aux urgences environnementales / Environmental Emergency Response Section alexandre.ler...@ec.gc.ca ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss
RE: [OSGeo-Discuss] Generating html clickable image maps from polygons
Alex, You can use MapServer to generate imagemaps. See http://mapserver.org/output/imagemaps.html David. -Original Message- From: discuss-boun...@lists.osgeo.org [mailto:discuss-boun...@lists.osgeo.org] On Behalf Of Alexandre Leroux Sent: Monday, January 05, 2009 2:37 PM To: OSGeo Discussions Subject: [OSGeo-Discuss] Generating html clickable image maps from polygons Hi list, A rather technical question. I was able to find a potential solution with GRASS GIS, but want to know if there are other solutions involving FOSS4G software. Which other FOSS4G software can generate html clickable image maps out of polygons? The challenge is simple: a colleague has many polygons that must be exported to several clickable PNGs like the example on this page: http://www.weatheroffice.gc.ca/warnings/sqc_e.html (A webmap tool such as OpenLayers would be much more powerful, but in some cases we do need clickable PNGs.) I found out it seems GRASS GIS 6.3+ can do it via its HTMLMAP driver: http://www.phygeo.uni-hannover.de/grass/grass63/manuals/html63_user/htmlmapdriver.html Can any other OSGeo software do the same? Thanks for any reply! Alex -- Alexandre Leroux, M.Sc., Ing. Environnement Canada / Environment Canada Centre météorologique canadien / Canadian Meteorological Centre Section de la réponse aux urgences environnementales / Environmental Emergency Response Section alexandre.ler...@ec.gc.ca ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss
[OSGeo-Discuss] Generating html clickable image maps from polygons
Hi list, A rather technical question. I was able to find a potential solution with GRASS GIS, but want to know if there are other solutions involving FOSS4G software. Which other FOSS4G software can generate html clickable image maps out of polygons? The challenge is simple: a colleague has many polygons that must be exported to several clickable PNGs like the example on this page: http://www.weatheroffice.gc.ca/warnings/sqc_e.html (A webmap tool such as OpenLayers would be much more powerful, but in some cases we do need clickable PNGs.) I found out it seems GRASS GIS 6.3+ can do it via its HTMLMAP driver: http://www.phygeo.uni-hannover.de/grass/grass63/manuals/html63_user/htmlmapdriver.html Can any other OSGeo software do the same? Thanks for any reply! Alex -- Alexandre Leroux, M.Sc., Ing. Environnement Canada / Environment Canada Centre météorologique canadien / Canadian Meteorological Centre Section de la réponse aux urgences environnementales / Environmental Emergency Response Section alexandre.ler...@ec.gc.ca ___ Discuss mailing list Discuss@lists.osgeo.org http://lists.osgeo.org/mailman/listinfo/discuss