Re: [slim] Confused by Alarm Clock Behavior
wl1 wrote: > I'd suggest not syncing all devices for a few days to confirm if that is > part of your problem (or at least the Boom, as that is the oddball of > the three). My Alarm works since the early days (somewhere around 2006/7) without any odd behavior. It starts every weekday with an internal playlist and stops like it should. The only addon for the alarm thats on my personal wishlist is a "dont wake me up on a National holiday". Of curse i added this feature in a external bash script. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=110612 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Search issue
RonM wrote: > > Back to the search, using Squeeze Cntrl on Android, and both artist and > album searches worked fine, but song search produces the same error > message. AFAIK Squeeze Cntrl caches some library parts on the device for faster albumartwork. see https://angrygoatapps.com/sqzctrl_android.html > Incremental list loading for fast navigation through the menus. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=110574 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Windows 10: Master volume amplified
I have no clue about your sound device but the smartest task whenever "Conexant SmartAudio HD" is involved is get rid of the driver and use another one instead. "The Driver" not the hardware sound device! DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=110319 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Linux
NE5 wrote: > which is the best ? The one that fit all your needings and you can operate. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=110137 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Auto sync players and auto start stream with Raspberry Pi
advancedcommil wrote: > I was planning on just putting a startup.sh script on the desktop of the > pi putting a line to get it to auto sync any new players and then play a > track The benefit of asking complicated questions in a single line is always a good startingpoint of a very long thread.:mad: DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=110203 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] VNC for piCoreplayer?
Afaik vnc and its derivates needs X-server and picore doesnt have a X Server. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=110206 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Auto sync players and auto start stream with Raspberry Pi
advancedcommil wrote: > I'm using a Raspberry Pi and was wondering if it was possible to create > a startup script that will detect and synchronize all of the available > recievers and play a designated audio steam Since some of us did - it its possible. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=110203 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Linux
NE5 wrote: > how exactly do these linux distros not need security updates ? WHAAAT?? Forget that nonsense ASAP!! NE5 wrote: > so does running linux etc expose that in any way ? > > How long does it take to convert to linux, a few hours, longer ? As I > will need to be at home and allocate however long it might take rather > than leave the job halfway through. Buy a cheap rpi3 or nanopi4m and run that 24/7 for lms only. Dont mix your normal stuff with it and your fine. How long do you need to calculate the 17th position of pi? -> Depends on your math skills! Same as windows -> linux. And a cheap RPI is small and handy you can fiddle thing out everywhere. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=110137 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Linux
NE5 wrote: > Does anybody use Linux and Squeezebox classic ? Does it have any > problems with anything ? linux is a big field to dig - any chance of a more precise question? If you use a linux distri and that matches the needed Perl Version and architecture from a version of LMS why should we got a problem? DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=110137 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: Extend the alarm�s fade in time for philips hue lights
stig wrote: > that’s a shame it would have been nice addition to my smart home > to have the Hue light fade in in the morning with some nature sounds > slowly getting louder to wake you gently. > could you point me to how to extend the alarm to 20 seconds Its already hardcoded to 20seconds. btw: lets think about the end is like Volume up to 100% 30(min) / 100(percent) = 0.33 percent per minute that means in 3 minutes the Volume must jump from 0.0 Mute to 1% - that means you wouldnt hear anything unless ... minutes (depends on your amp) Some things sometimes doesnt make sense. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=110084 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Default Cover Art Hi-jacked.
RobbH wrote: > This sounds like behavior I've observed in the past with files that had > "No Album" as the album title. LMS would sometimes pick up an image file > from the directory containing one of the "No Album" files and use it for > all "No Album" files. The image file was not necessarily named > "cover.jpg", but that's the name LMS uses when it serves it. +1 but a long time member from 2007 should already knew that? btw: you can try to change http://lms.ip:9000/settings/server/formatting.html? the values so lms can guess tags - but tagging the files should be the better solution. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=110021 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Default Cover Art Hi-jacked.
Club1820 wrote: > or how I can get it to stop being displayed as the default? > > thanks in advance. check your log files ! DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=110021 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] 6 SATA Hard Drives full of FLAC files - need suggestions
12 TB thats pretty bad... ..because i run a wd red 10TB Disk for small cash. and a single drive fits proper in a single disk case. but 12 TB doesnt fit in the 8.8TB drive labeld as 10TB. Since your able to backup one drive after another i dont think you're using any raid just a bunch of disks? teracopy looks like you running Windows. Rsync can handle a bandwith limit but the rsync windows version cant handle UTF8. So rsync isnt a good idea... DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109946 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Library appears to be completely empty and cannot rescan
bzlrbi wrote: > Partial success. I went out of town about 30 hours ago and the scan is > still showing the same folder. Did you removed or added the "other" stuff like Pictures and videos (my lms runs with "--nomysqueezebox --noimage --novideo) for scanning? DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109832 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] OH NO! I may have fried my SB3
slartibartfast wrote: > If these big capacitors are on the DC side of a rectifier how would they > send power back to the power lines? remember most of these "cheap" devices doesnt have a Transformer Protector Diode like a laboratory power supply. Only this diode will stop the current to go back. Anyway The only thing that solves his proble is dismantle the PSU, check everything or buy a new one. There are too many may and be s what really happend. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109831 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] OH NO! I may have fried my SB3
Fizbin wrote: > Strange how turning a breaking off and on would do that. I wonder if the > outcome would have been the same if the power (lines) went off and on? Thats everything else but strange... If you got some devices with big capacitors in that line and kick the breaker the capacitors from that device sends their power back to the powerlines. And theses breakers are not supposed to act like a switch - they should safe you not your devices. And that can bring a "10% faulty device to a 100% faulty device". DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109831 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] SqueezeBox changing volume and music by itself! =/
MAlgol wrote: > My router should be all close from the outside. =/ Are you using a later / up2date Version of lms? In this case *resets to classic theme* isnt posible over the internet cause the settings are a little bit better -secured-. So if your using a later Version and "resets to classic theme" still your problem its another thing. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109800 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] How to retain active playlist when squeezebox service is restarted
And i found another usecase for it.. I do run Alarms on some players. Whenever that Alarm is active it wipes the last playlist from that player and adds the alarmplaylist/file as its playlist. So it doesnt matter if that particular DSTM is a bug or a feature. If you really what do "save" your last active playlist when using alarms - you need to save it by hand or script. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109712 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] How to retain active playlist when squeezebox service is restarted
gregklanderman wrote: > Nice that you found that work-around, but it really seems to just be a > bug in DSTM. > i am pretty sure its a feature not a bug eg /plugins/playhistory (also from Michael) do show these tracks. There was a discussion about "i started with this track and dtsm drifts away from my track" so the feature (i believe so) is - "if you dont touch the playlist made from dtsm and you restart your server - dtsm will start from scratch with your "touched" playlist not with its own. Anyway i am happy with it (and i even have No worries to hack the "add track button" out of my skin) If you think its a issue ask Michael about it. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109712 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] How to retain active playlist when squeezebox service is restarted
DJanGo wrote: > save the script, make it executable and let it run > btw: there is a "issue" in the script it always move the first tracks to 2.nd postion when there is a 2nd Track and moves it back to its org. position to ensure dstm filled playlists are updated. By doing this the filestamp of the playlist is changed before copied to the playlistdir. And that makes the check for newer files later a little bit useless. Other than that it should work DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109712 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] How to retain active playlist when squeezebox service is restarted
tuc wrote:
> Sometimes I (or friends) accidentally zap the active playlist by
> pressing "play" to an item found by a search in the music library. I
> would like to be able to "go back" to the previous active playlist. Now,
> this is quite tricky since it would require every update to the active
> playlist to be "saved to disk" and also require functionality to make
> the "playlist saved to disk available".
> PPS: Long live LMS :-)
tuc wrote:
> PS: I will try your solution to my original post later today and let you
> know how it went.
> PPS: Long live LMS :-)
first please make sure you've got an answer
Code:
which nc
which sed
otherwise you need to install nc / sed before any further action.
save the script, make it executable and let it run
The last line is not working because of the # in front
If you remove that # your lms starts scanning your playlists - snce your
runing a rpi i wasnt sure if you really want that.
Feel free to test it before you add it as a cronjob. You should end in a
playlist in your playlistfolder for every player named
playername_hour.m3u.
If you run it always @ the same hour it should do what you want.
Code:
#!/bin/bash
##vars
port=9090
server=127.0.0.1
hour=`date +%H`
playlistdir=$(grep "playlistdir:"
/var/lib/squeezeboxserver/prefs/server.prefs|grep '/'|cut -d ' ' -f2)
players=$(printf "player count ?\nexit\n" | nc $server $port | cut -d ' ' -f
3)
for((i=0; i<$players; i++))
do
playerID=$(printf "player id $i ?\nexit\n"|nc $server $port|cut -d ' ' -f
4|sed 's/%3A/:/g')
player_ID=$(echo $playerID|sed 's/://g')
playername=$(printf "$playerID name ?\nexit\n" | nc $server $port | cut -d '
' -f 3)
printf "$playerID playlist move 0 1\n $playerID playlist move 1 0\nexit
\n"|nc $server $port
if [ `wc -l /var/lib/squeezeboxserver/prefs/clientplaylist_$player_ID.m3u |
awk '{print $1}'` -ge "4" ]
then
cp -p /var/lib/squeezeboxserver/prefs/clientplaylist_$player_ID.m3u
"$playlistdir/$playername"_$hour.m3u"
fi
done
scanstatus=$(printf "rescan ?\nexit\n"|nc $server $port|cut -d ' ' -f2)
if [ "$scanstatus" = "1" ]
then
echo "lms is already scanning ..aborting"
exit 0
fi
#find "$playlistdir/" -iname "*_$hour.m3u" -mtime 0 &&
squeezeboxserver-scanner --playlists --novideo --noimage --priority 20
>/dev/null
DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516
View this thread: http://forums.slimdevices.com/showthread.php?t=109712
___
discuss mailing list
discuss@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] How to retain active playlist when squeezebox service is restarted
tuc wrote:
> PS: I will try your solution to my original post later today and let you
> know how it went.
> PPS: Long live LMS :-)
first please make sure you've got an answer
Code:
which nc
which sed
otherwise you need to install nc / sed before any further action.
Code:
#!/bin/bash
##vars
port=9090
server=127.0.0.1
hour=`date +%H`
playlistdir=$(grep "playlistdir:"
/var/lib/squeezeboxserver/prefs/server.prefs|grep '/'|cut -d ' ' -f2)
players=$(printf "player count ?\nexit\n" | nc $server $port | cut -d ' ' -f
3)
for((i=0; i<$players; i++))
do
playerID=$(printf "player id $i ?\nexit\n"|nc $server $port|cut -d ' ' -f
4|sed 's/%3A/:/g')
player_ID=$(echo $playerID|sed 's/://g')
playername=$(printf "$playerID name ?\nexit\n" | nc $server $port | cut -d '
' -f 3)
if [ `wc -l /var/lib/squeezeboxserver/prefs/clientplaylist_$player_ID.m3u |
awk '{print $1}'` -ge "4" ]
then
cp -p /var/lib/squeezeboxserver/prefs/clientplaylist_$player_ID.m3u
"$playlistdir/$playername"_$hour.m3u
fi
done
scanstatus=$(printf "rescan ?\nexit\n"|nc $server $port|cut -d ' ' -f2)
if [ "$scanstatus" = "1" ]
then
echo "lms is already scanning ..aborting"
exit 0
fi
find "$playlistdir/" -iname "*_$hour.m3u" -mtime 0 &&
squeezeboxserver-scanner --playlists --novideo --noimage --priority 20
>/dev/null
DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516
View this thread: http://forums.slimdevices.com/showthread.php?t=109712
___
discuss mailing list
discuss@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] How to retain active playlist when squeezebox service is restarted
tuc wrote: > Wow, so cool! Thanks! > Just to be sure. We are talking/writing about the same. A saved Playlist- is an entirely different kind of flying altogether!- ;-) DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109712 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] How to retain active playlist when squeezebox service is restarted
tuc wrote: > I do use "Dont stop the music". I will try your suggestion. Thanks very > much. > > I have a crontab entry that makes the server reboot at night (perhaps > overkill on a linux based system :-)) so it would be even better if I > didn't have to do anything. Or perhaps I could do another crontab job > that casued the playlist to be stored immediately before the reboot. > > -thomas add two lines in front of your crontab similar to this: Code: printf "pl:ay:er:ma:ca:dd:re:ss playlist move 0 1\nexit \n"|nc 127.0.0.0 9090 printf "pl:ay:er:ma:ca:dd:re:ss playlist move 1 0\nexit \n"|nc 127.0.0.0 9090 That moves the 1st file to 2.nd place and back again. And that move is recon by lms and it saves the cached playlist. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109712 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] How to retain active playlist when squeezebox service is restarted
Do you use Dont Stop The Music / Lastmix? If yes - just add another / remove any track on your own to the playlist before you stop lms. Adding tracks from dstm didnt didnt trigger "change the cached / stored playlist". DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109712 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezeplay for Linux?
steve-g wrote: > I've swapped over to linux (mint) on one of my computers and I've been > looking for a program to play music from my LMS system but haven't been > able to find anything. > > I use squezeplay on windows - is there something similar for linux? > > Thanks > > Steve http://your.lms.server.ip:9000/html/softsqueeze/index.html DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109608 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Wiki rechapta v1 is shutdown
ahhh... The used Extension:ConfirmEdit needs MediaWiki 1.25+ we're on 1.18 DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109535 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Wiki rechapta v1 is shutdown
mherger wrote: > This sucks... I never get to see the recaptcha for whatever reason. And > > the new version made the server fail the page handler without giving any > error message at all :-(. > > -- > > Michael Michael, did you follow these steps? https://www.google.com/recaptcha/admin#list Since your the Bureaucrat of the wiki you never get the rechapta. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109535 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Wiki rechapta v1 is shutdown
Michael, login works now, but its still the same v1 rechapta server used. So no difference.. How to get to the error Add somewhere something like Code: url="http://www.mysqueezebox.com/update/?version=7.9.2&revision=1&geturl=1&os=deb$os"; > Your edit includes new external links. To help protect against automated > spam, please type the two words you see in the box below: DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109535 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Wiki rechapta v1 is shutdown
mherger wrote: > Could you please try again? sorry mate... now http://wiki.slimdevices.com/index.php/Special:UserLogin renders to an empty page i cant login :( DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109535 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Wiki rechapta v1 is shutdown
since you cant read edits What happens to reCAPTCHA v1? Any calls to the v1 API will not work after March 31, 2018. https://developers.google.com/recaptcha/docs/faq DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109535 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Wiki rechapta v1 is shutdown
DJanGo wrote: > Hi Michael, > > i cant add/change the wiki - the chapta server is > down.25731 I' ve added http://wiki.slimdevices.com/index.php/Debian_Package#installing_7.9.2 - but cant add the "whole" script cause there is a url involved that requires me to type a chapta - and the chapta server is down. Could you fix this please? May your not required to use a chapta. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109535 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
[slim] Wiki rechapta v1 is shutdown
Hi Michael, i cant add/change the wiki - the chapta server is down.25731 +---+ |Filename: v1_unsupported.png | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=25731| +---+ DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109535 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] No radio stations will play
pkfox wrote: > Who ? Someone who can change stuff in http://somafm.com. btw: that bbc link works for me DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109520 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] No radio stations will play
pkfox wrote: > So what can I do ? Someone already fixed it. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109520 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] No radio stations will play
pkfox wrote: > Error: Couldn't create command line for mp3 playback > for [http://ice1.somafm.com/groovesalad-128-mp3] http://somafm.com/groovesalad/directstreamlinks.html http://somafm.com/m3u/groovesalad.m3u DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109520 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Server disconnections - help needed ;-)
@bpa: didjean wrote: > I use Max2Play on a Raspberry *Pi 3* to host my LMS to feed several > Squeezes. are you using wlan? How did you disable mysqb? With SLIMOPTIONS="--nomysqueezebox --noimage --novideo" in the configfile? DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109497 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Play particular pause tone mp3 between songs in playlist
Hi is this a single player or synced players? in case of a single player (with alsa) you only need to kill the squeezelitesession play that beep with aplayer or whatever other audioplayer max2play deliveres and restart squeezelite again. in case of synced players you need a little bit more. playlist preview & play (your beep) & playlist resume lms:9000/html/docs/cli-api.html wrote: > > playlist preview > > When called without a cmd param of stop, replace the current playlist > with the playlist specified by url, but save the current playlist to > tempplaylist_.m3u for later retrieval. When called with the > cmd param of stop, stops the currently playing playlist and loads (if > possible) the previous playlist. Restored playlist jumps to beginning of > CURTRACK when present in m3u file, and does not autoplay restored > playlist. > > Examples: > > Request: "04:20:00:12:23:45 playlist preview > url:db:album.titlesearch=A%20FEAST%20OF%20WIRE > title:A%20Feast%20Of%20Wire" > Response: "04:20:00:12:23:45 playlist preview > url:db:album.titlesearch=A%20FEAST%20OF%20WIRE > title:A%20Feast%20Of%20Wire" > > Request: "04:20:00:12:23:45 playlist preview cmd:stop" > Response: "04:20:00:12:23:45 playlist preview cmd:stop" > > > playlist resume > > Replace the current playlist with the playlist specified by p2, starting > at the song that was playing when the file was saved. (Resuming works > only with M3U files saved with the "playlist save" command below.) > Shortcut: use a bare playlist name (without leading directories or > trailing .m3u suffix) to load a playlist in the saved playlists folder. > > Optional tagged parameters are noplay, which when non-zero will not > auto-start the track, and wipePlaylist, which will destroy the saved > playlist from both the filesystem and from the DB (these tagged params > are typically used for resuming a temporarily cached playlist, e.g. > after exiting alarm sound preview on squeezeplay devices). > > Examples: > > Request: "04:20:00:12:23:45 playlist resume abba" > Response: "04:20:00:12:23:45 playlist resume abba" > > DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109494 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Why is LMS using such an old SQLite version?
DJanGo wrote: > Hi Michael, To answer my own "question" - maybe... eg running a clean scan from scratch -> no library.db (with the std. "old" Sqlite Version) on 7.92 (latest) needs 38min. running a clean scan over the gui on the same hardware/software needs 22 mins. The is some very little minor difference if using DROP TABLE IF EXISTS fulltext and DROP TABLE IF EXISTS fulltext_terms; or not. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109325 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Why is LMS using such an old SQLite version?
mherger wrote: > That's an odd one. In my previous tests this was constant. Every test I > did was a massive slow down in FTS. But I always did delete the > library.db to start from scratch for every test. Now I repeated the test > > for the same collection, without deleting that file, and performance was > > as before (plus speed up in other aspects). As if re-using a file was > much faster than growing it from zero.-- > > Michael Hi Michael, is that because of /usr/share/squeezeboxserver/lib/DBIx/Migration.pm that calls /usr/share/squeezeboxserver/SQL/SQLite/schema_20_up.sql Code: DROP TABLE IF EXISTS fulltext; and DROP TABLE IF EXISTS fulltext_terms; DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109325 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] BT Hub stopping my ipad accessing LMS
mandryka wrote: > I would prefer to be connected to the BT hub because it's faster in my > listening room. Anyway things are clearly not right. > > Suggestions appreciated! > you need to add some more info.. it "seems" your running two networks - both have a route to the internet but the bluetooth didnt have a route to your local lan ->your netgear router. You need to add routings from the bt to the lan and vive versa from lan to bt. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109424 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Empty albums in virtual library
DJanGo wrote: > I am running debian. > > > > - Browse Artists = use *single*, configurable list - Composer, Conductor, Band/Orchestra *un*checked - List compilation albums *As Group* - Treat TPE2 MP3 Tag as *Band* - No error message(s) in the server.log > > > > > I am seaching for Genre Soul and found John Wirtz. That link was empty. Since i knew some of my stuff i found rge John Wirtz Soul Track. He is one of the composers from the Track Al Green/Love is Reality/Why? After changing > > Composer, Conductor, Band/Orchestra *checked* That (and some more tracks) are now listed under Soul / John Wirtz. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109367 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Empty albums in virtual library
afriend wrote: > I'd say that's a different problem. I have no missing or blank named > genres. Only (for example) artists that show in the wrong genre, just > because they are part of a compilation where some other artist has a > track that's in this genre. Hmmm... thats what i understand: All tracks on your sampler got the same Value in TPE2. That means a Artist like "Air" and "Various Artists" sharing the same Track and therefore the same genres, years and so on. Please ask Michael Herger whats he thinks about that. If someone really doesnt need to think about it cause he already knows it- its him. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109367 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Empty albums in virtual library
afriend wrote: > If TPE2 Tag = album artist tag, then yes, all of my tracks have this one > (I use iTunes to manage my tracks). > If it's -not- a compilation, then *album artist = artist* - if it's a > compilation, then -album artist = Various Artists-. > if your name for the compilationsgroup is even *Various Artists* then you should change that... I know about the 'genre' (https://forums.slimdevices.com/showthread.php?104911-Missing-empty-genres) ;-) DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109367 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Empty albums in virtual library
afriend wrote: > Hey DJanGo: > > like I said, toggling the setting how the compilations should be grouped > doesn't change anything (even after clean LMS reinstall!). It was one of > the first things I looked at because it seems like a natural candidate. Did you check these files for an TPE2 Tag? afriend wrote: > And it's not just limited to my plugin. I can reproduce this with the > advanced search GUI as well: since you ve got that sqlite statement from the advanced search (like you mentioned in the plugin Thread) - any other behavior is not expected. afriend wrote: > (I really hope it's not OS related) I dont now therefore i added my OS to my answer. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109367 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Empty albums in virtual library
afriend wrote: > > - in the *Settings > My Music* my settings are: > > > > - Browse Artists = use *single*, configurable list - Composer, Conductor, Band/Orchestra *un*checked - List compilation albums *under each artist* (switching this to the > alternative settings has no effect regarding the empty album > problem) - Treat TPE2 MP3 Tag as *Album Artist* - No error message(s) in the server.log > > > > > > And now here's where it gets interesting/weird: I've installed LMS > with a part of my music files in a virtual machine (macOS 10.12.6). > I've tried to use the exact same settings. I am running debian. - Browse Artists = use *single*, configurable list - Composer, Conductor, Band/Orchestra *un*checked - List compilation albums [Bas group[/B] - Treat TPE2 MP3 Tag as *Band* - No error message(s) in the server.log If these settings (after a cleanup & rescan) doesnt help - post your plugin.pm DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109367 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Radio with battery: standby mode possible?
slartibartfast wrote: > Outlets in the bathroom are not allowed in the UK. > > Sent from my SM-G900F using Tapatalk Nope. > Sockets are not allowed in bathrooms or shower rooms (apart from > shaver-supply units) ::unless they can be fitted at least three metres > from the bath or shower::. 'source' (https://www.electricalsafetyfirst.org.uk/guides-and-advice/around-the-home/bathroom-safety/) DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109350 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Virtual Libraries - help beginner please
afriend wrote: > One oddity: in the artists menu for this virtual ibrary, some artists > have - in addition to the correct albums - empty albums listed (when you > click on them, it says empty). That happens also if I create such a > library with the advanced search UI. Any idea how to get rid of those? please check these artists for "member of a sampler/compilation" Do you use one or two lists? -> settings/my music / browse artists I believe your using two - try one and these emptry artists are gone. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109334 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Why Do We Still Call It "Logitech Media Server?"
mherger wrote:
>
> But the reason why LMS is still called LMS is much simpler: renaming it
> is useless effort only, a waste of resources imho.
its even better...
the change from something TO logitechmediaserver isnt even done
everywhere...
eg:
> PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
> DESC="Logitech Media Server"
> NAME=squeezeboxserver
> NEWNAME=logitechmediaserver
> DAEMON=/usr/sbin/$NAME
> DAEMON_SAFE=/usr/sbin/${NAME}_safe
> PIDFILE=/var/run/$NEWNAME.pid
> SCRIPTNAME=/etc/init.d/$NEWNAME
> SLIMUSER=$NAME
>
DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516
View this thread: http://forums.slimdevices.com/showthread.php?t=109337
___
discuss mailing list
discuss@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Virtual Libraries - help beginner please
i cant tell to your #2 question -but #1 > 1) where are the mistakes in my SQL? seems fine to me... What exactly do you want aaa is really aaa or also something like baaad? I would open a sqlite shell and run your sql statement with -limit 1 Code: sqlite> select tracks.id from tracks LEFT JOIN comments comments ON comments.track = tracks.id where comments.value LIKE 'aaa' limit 1; That should show one match. copy that value add it in a browserlink http://lms:9000/trackinfo.html?sess=that_id you should see a track with the comment aaa works for me DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109334 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Virtual Libraries - help beginner please
did you restart lms after these changes? Its a long time ago - so i am not 100% sure - but i -think- a rescan was needed and i used the playlist version. Not sure about that. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109334 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Virtual Libraries - help beginner please
afriend wrote: > comments.track=tracks.id and > comments.value like > '%BBB%' and > comments.value > like '%CCC%' you need to change a single % to double %% like this > comments.track=tracks.id and > comments.value like > '%%BBB%%' and > comments.value > like '%%CCC%%' and another little tip - first try to add a single library and after you find out -add more with the plugin. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109334 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: New music is not in �New Music�
Paul Webster wrote: > I think it is based on the last modified date of the audio file. Thats exactly how it works. But: if someone set the value for show new tracks to eg 1 there is only a single track. or using "backups" from somewhere and copy the files with the timestamps - it never apears under new unless these files are newer than (set counter) than any other track. Just edit the tags of the files, do a rescan and voila. In this case LMS is very reliable if you understood the logic behind it. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109275 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] HDMI input
Bob01 wrote: > My question is whether it is possible to use the HDMI port on the > Raspberry Pi as an audio input source, and route the audio out through > the hifiberry amp? HDMI Device is output only. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109221 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] CDs rapid Demise
SlimChances wrote: > Surely there is a much greater cost to produce and ship CDs to stores > than to provide a download Hmm Are you working for a distributor or have any more than std. Pub knowledge about that? I dont think so. You didnt believe the backgrounds and the infrastructure involved to provide downloads. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=109154 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] How to connect player to LMS from outside of my network?
tutejszy wrote: > Finally, I think i found perfect solution. Hi, - get a raspberry pi 3 or 3+ (even an RPI2 should work) - install rasbian - go to 'pivpn' (http://www.pivpn.io/) - install and run the pivpn setup from the 'howto' (https://www.youtube.com/watch?v=pUBMcsvJfe4) - open a single port on your Router eg 1194 and net it to your rpi with pivpn - remove /close all the previous opened ports - transfer the vpn config to your devices that should connect to your lms - your done That i simple safe and you can also run a squeezelite on that system - so not ending with a additional device that only can handle a single job. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=108857 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Ratings to files
Roland0 wrote: > Paths are stored urlencoded in whatever encoding LMS is using. *lol* - I should update my internal python 2 brain decoder - or run your script not with my virtual brain decoder but with the one from my computer before "posting" Nice - very nice DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=108896 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Ratings to files
Hi, since he already had that csv - the main question is: Is that a onetime task only or a aldayrunner? A onetime solution (minimal) should look like: Export 10 playlists each for a rating. Import that playlist with eg, mp3tag and mark all tracks and add a tag (popm whatever) with 1 or similar rating. Repeat these steps for all playlists. A alltime runner should also check is the rating already in the tag if not change / add that rating to the file. I would prefer a simple cmd for that - the python demo from Roland (IMHO) only make sense if the Filenames/paths are UTF-8 like > x:\Røyksopp\The Girl and The Robot\Røyksopp - The Girl and The Robot - > 01 - The Girl and The Robot (Album Version).mp3 Changing strings like that is a mess with vbs/cmd/powershell and a fun with python. If "thats" not needed - python is too complex for a "excel is a database" user. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=108896 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Ratings to files
Robbyell wrote: > > d) find what input format the desired player can take (csv, XL html(?) > etc) > e) convert my 2 columns to that format? > > Am I on the right track?! d) find a tag program, that runs with parameters (commandline) e) write a script that f) handle step: - swap all the %20s / %27s for spaces etc - and runs c) g) forget about excel DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=108896 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] What are your long-term SqueezeBox solutions?
w3wilkes wrote: > The big issue is the ripping and meticulous tagging of your music that's > required. The proper tagging of your music can make or break the ease of > use of SB. ? My "real" library is stored in many boxes with a printed label on it. sorting my "real" library is a bigger mess than adding some tags to the ripped files. Most ( >75% of my "real" library) is on vinyl even that wasnt a big issue it was fun because i knew the benefefits of that work. Back to Topic: What is the meaning of long term? I just walked with my kid and my parents Dogs around my parents town and we found some boxes full with VHS Tapes at a corner on the street. When i was that old as my kid is now everyone had these vhs Tapes - today i had to explain my little daughter what she just saw in the rubbish... DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=108823 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Ratings to files
Hi, looks like a pretty simple job, but it isnt simple. eg Excel isnt a database (that statement alone tells me about your IT Knowledge) Since LMS never ever touches /changes tags only reads them - there is IMHO no way to do that with a plugin. cause that would break the "never change tags with lms behavior" you need: - A commandline tagger for your files and os. excel runs on osx and windows - not native on linux. you os is??? - A prefered tag to use (there are some to use) - a csv file with your ratings nd your filepath/names - some script that changes the tags for each filename with the ratings - that script must check "if exist file then" cause some special chars in the lms db are not the real one -> " " is called %20 and so on - some debugging you see its not that simple as it looks on the first place but its not impossible. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=108896 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] downloading files from LMS
muksuluuri wrote:
> My LMS resides on my linux mint box.
Hi,
source is your Music store
dest is your backupdisk
to only copy files larger than 1MB ->
find *source* -type f -size +1024k -exec cp {} *dest* \;
if you have jpg in the folders you should run a
find *source* -type f -name '*.jpg' -exec cp {} *dest* \;
afterwards
But dont delete the old sourcefiles !
I do own much stuff thats under 1MB in size and these files are just
shorter tracks / Intros outros
DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516
View this thread: http://forums.slimdevices.com/showthread.php?t=108619
___
discuss mailing list
discuss@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] downloading files from LMS
muksuluuri wrote: > Is there a way to download/copy all files from LMS? > > Now I'd like to find a way to safely copy the music to another > destination, and then delete the original files and rebuild the library. > > Muksuluuri Hi, 1: no way 2: did you do a cleanup and rebuild databse from scratch already? 3: What System? There are many of them and each one uses other ways to only copy files larger than x bytes. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=108619 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] CLI/web command to search for track from specific album?
DJanGo wrote:
>
> I dont know if you need all of these empty requests.
now i know - you' not need them..
> params = (
> ('player', 'your.player.mac.id'),
> ('action', ''),
> ('search.me_titlesearch', 'papa was a rolling'),
> ('search.album_titlesearch', 'All Directions'),
> ('saveSearch', ''),
> ('submitAdvSearch', 'Suchen'),
> ('searchType', 'Track'),
> )
DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516
View this thread: http://forums.slimdevices.com/showthread.php?t=108606
___
discuss mailing list
discuss@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] CLI/web command to search for track from specific album?
itm wrote:
> I've been automating my LMS playback using web requests using the
> Titlesearch command. I often request tracks that exist on many albums
> (e.g. studio, live, cover versions by different artists...). Is there a
> way of searching for a specific track on a specific album?
Hi, thats a tough one...
to find the Track Papa was a Rolling Stone from the Album All Directions
you need to build a json like this:
> params = (
> ('player', 'your.player.mac.id'),
> ('action', ''),
> *('search.me_titlesearch', 'papa was a rolling'),*
> ('search.contributor_namesearch', ''),
> ('search.contributor_namesearch.active1', '1'),
> ('search.contributor_namesearch.active2', '1'),
> ('search.contributor_namesearch.active4', '1'),
> ('search.contributor_namesearch.active5', '1'),
> *('search.album_titlesearch', 'All Directions'),*
> ('search.genre', ''),
> ('search.genre_name', ''),
> ('search.secs.op', '='),
> ('search.secs', ''),
> ('search.tracknum.op', '='),
> ('search.tracknum', ''),
> ('search.year.op', '='),
> ('search.year', ''),
> ('search.persistent_playcount.op', '='),
> ('search.persistent_playcount', ''),
> ('search.persistent_rating.op', '='),
> ('search.persistent_rating', ''),
> ('search.timestamp.op', '='),
> ('search.timestamp', ''),
> ('search.bitrate.op', '='),
> ('search.bitrate', ''),
> ('search.samplerate.op', '='),
> ('search.samplerate', ''),
> ('search.content_type', ''),
> ('search.url', ''),
> ('search.filesize.op', '='),
> ('search.filesize', ''),
> ('search.comments_value', ''),
> ('search.lyrics', ''),
> ('saveSearch', ''),
> ('submitAdvSearch', 'Suchen'),
> ('searchType', 'Track'),
> )
>
I dont know if you need all of these empty requests.
edit Michael was faster.. ;-)
DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516
View this thread: http://forums.slimdevices.com/showthread.php?t=108606
___
discuss mailing list
discuss@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] IMPORTANT: Stop forwarding your LMS ports to the internet!
PasTim wrote: > I'm not trying to be clever or better, just trying to understand my > options. I'm the only (valid) user. Why would I need to change a > setting on an update? > > I don't really understand what or who you mean about the "clever" guys > (and presumably gals) and Michael changing settings for them, but it > doesn't matter. @Tim: The "clever" People are the People that causes Michael to open this Thread and thinks about a "solution" or minimize the worst case szenario. AFAIK Michael wants a solution that the settings from LMS (even when the LMS Server IP & Ports are forwarded to the Internet) are "safer" then now. Your idea (completly disable the access except for "known" IPs) sounds clever and might be a better solution, but (the people we are talking about) would redo these changes (if MIcheal would add them in a next Version) cause that would stopp these people to access their LMS from allover the World. Since setting up a VPN isnt that easy/simple and we're dealing with lots of different devices and usecases.. @d6jg There are only two options - The more common "easy" Way: The Router handles Gateway and VPN - The "special" Szenario with a *d*e*m*ilitarized *z*one - used by Techies where Router & Firewall are separate devices DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=107165 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] IMPORTANT: Stop forwarding your LMS ports to the internet!
PasTim wrote: > Notwithstanding the recent LMS security improvements, I assume that > explicitly specifying each of the local IP addresses that might use LMS > in the 'Allowed' list, and not including the router, will achieve much > the same effect, so I don't need to use the CLI password. If an SSH or > VPN server is on the home network that could be explicitly included or > excluded as required. Hi, sounds like a "clever" idea but 1) Who should change that setting? The Installer/updater on a clean install -> yes The Installer/updater on a update install -> The Installer/updater on a update install where -allowedHosts: 127.*,- not in the Server.prefs-> yes 2) Remember the guys we are talking about are "clever" - when Michael changes these settings for them -> They cant use lms from outside (and these clever guys are stupid enough to change that setting back to something they think of) IMHO Michael had the "better" Idea with "lms is available from everywhere but the settings are only from internal except Gateway DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=107165 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] IMPORTANT: Stop forwarding your LMS ports to the internet!
DJanGo wrote:
> And thats exactly how it works.
>
> own PC -> private IP Adress -> Router ISP official IP Adress ->
> {Internet} <- Router external IP <- foreign private IP.
>
> Its the MAC Adress thats changed to the router not the IP.
mea culpa i just forget the NAT/Routing Mode from some devices
There is the transparent Mode and the NAT/Routing Mode thats the one
Michael is using. That Mode really translates the external IP from
sender/receiver to the router.
DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516
View this thread: http://forums.slimdevices.com/showthread.php?t=107165
___
discuss mailing list
discuss@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] IMPORTANT: Stop forwarding your LMS ports to the internet!
paul- wrote:
> Not that I do this, but I opened up the ports to do some testing. On my
> netgear router, when it lets the traffic in, the connection at the
> server is shown as whatever the external device address.
And thats exactly how it works.
own PC -> private IP Adress -> Router ISP official IP Adress ->
{Internet} <- Router external IP <- foreign private IP.
Its the MAC Adress thats changed to the router not the IP.
DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516
View this thread: http://forums.slimdevices.com/showthread.php?t=107165
___
discuss mailing list
discuss@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] IMPORTANT: Stop forwarding your LMS ports to the internet!
slartibartfast wrote: > That does target devices with the default password though. -You- would > normally change it. Is -You- Average Joe ? How many additional lines are needed no sending the std. passwort but prase from a dictionary? The Answer is: one additional line of source code. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=107165 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] IMPORTANT: Stop forwarding your LMS ports to the internet!
since michael didnt see edits. just a not so old example http://www.zdnet.com/article/linux-malware-enslaves-raspberry-pi-to-mine-cryptocurrency/ DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=107165 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] IMPORTANT: Stop forwarding your LMS ports to the internet!
mherger wrote: > But then, please tell Joe Average what safe method there is to access > his network from the outside. > If ssh isn't, then don't even start to type the other three letters > starting > with "V". > > -- > > Michael Hi, whatever Joe uses it must be somewhere up2date. And needs some minimal security. Using VPN or not is a big difference. Cracker Jimboy needs to crack/hack/socialengineering your vpn settings. Thats a big step for him - unless Joe uses some very old methods for his vpn. Simply natting a vpn port to the world - is a bad idea - whatever port your natting everyone who scans for open ports finds the real service behind that very soon and very easy. I dont think any Joe on linux is using tools like faillock or something else. Maybe some using something like iptables to only allow ssh from special ips only. So what do you expect me to do? Tell joe what do to on his 512MB NAS ? Tell joe dont do it unless you really know what your doing? DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=107165 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] IMPORTANT: Stop forwarding your LMS ports to the internet!
mherger wrote: > > Is opening those ports in this way likely to expose me to much risk? > > SSH should be fine if it's well configured and maintained. > > -- > > Michael mea culpa Michael, but thats a little bit tooo short Remember under a actual version of Raspbian ssh isnt activated out of the box any more because of security reasons. Its not a question of a well configured ssh- its a matter of strong passwords for users that could access ssh. Since i am in charge for the computer stuff in my company and should know some tricks and basics - i cant say ssh from outside is somewhere near safe. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=107165 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] deleting WiFi connection
Robert Lauriston wrote: > In trying to resolve a Pandora issue, Eero support suggested I try > "completely forgetting the network settings." Is there any way to do > that short of restoring factory settings? > > I have ssh access. Maybe delete or edit something in /etc/network? Filed under "General Discussion" and no Hardware Infos provided.. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=108440 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Playlist Generator?
hmmm..
after fiddling around with that plugin i've set the logging for that
plugin to debug
> [17-12-22 15:57:07.5507]
> Plugins::PlaylistGenerator::ConfigManager::BaseParser::parseContent
> (121) Skipping test:
> [17-12-22 15:57:07.5509]
> Plugins::PlaylistGenerator::ConfigManager::WebAdminMethods::saveItem
> (1188) Opening configuration file:
> /media/music/[playlist]/demo.playlistdefinition.xml
> [17-12-22 15:57:11.3107]
> Plugins::PlaylistGenerator::ConfigManager::BaseParser::parseContentImplementation
> (501) Failed to parse configuration (test) because:
> File does not exist: select tracks.url from tracks
> join genre_track on
> tracks.id=genre_track.track
> join genres on
> genre_track.genre=genres.id
> left join dynamicplaylist_history on
> tracks.id=dynamicplaylist_history.id and
> dynamicplaylist_history.client='PlaylistPlayer'
> where
> audio=1
> and dynamicplaylist_history.id is null
> and genres.name in ('Pop/Rock','Rock','Rock & Roll','Pop')
> and (tracks.bpm > 127 and tracks.bpm < 130) ; at
> /var/lib/squeezeboxserver/cache/InstalledPlugins/Plugins/PlaylistGenerator/ConfigManager/BaseParser.pm
> line 498.
>
If i want to save a playlist it always ends (in the gui) with
permissions denied even when the folder is owned by nouser:nogroup
sorry cant help you any further
DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516
View this thread: http://forums.slimdevices.com/showthread.php?t=108436
___
discuss mailing list
discuss@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Playlist Generator?
w3wilkes wrote:
> Does anybody have a "SQLite Expert Personal" shell I could plug this
> Select into to generate a playlist?
>
> select tracks.url from tracks
> join genre_track on
> tracks.id=genre_track.track
> join genres on
> genre_track.genre=genres.id
> left join dynamicplaylist_history on
> tracks.id=dynamicplaylist_history.id and
> dynamicplaylist_history.client='PlaylistPlayer'
> where
> audio=1
> and dynamicplaylist_history.id is null
> and genres.name in ('Pop/Rock','Rock','Rock & Roll','Pop')
> and (tracks.bpm > 127 and tracks.bpm < 130)*;*
Hi just added that plugin and other than adding a ; at the end - its
running fine ..
DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516
View this thread: http://forums.slimdevices.com/showthread.php?t=108436
___
discuss mailing list
discuss@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Cross referencing 2 large music collections ?
dasmueller wrote: > no hidden files a simple -dir /AH /B /S k:\- could proove if you're right or wrong... DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=106109 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] LMS stopped starting
ezekieldas wrote: > [17-11-11 12:40:09.5362] main::init (387) Starting Logitech Media Server > (v7.9.1, 1509357021, Mon Oct 30 10:09:05 UTC 2017) perl 5.016003 - > x86_64-linux-thread-multi > [17-11-11 12:40:09.5484] Slim::Utils::PluginDownloader::extract (81) > unable to install NPRRadio - > /var/lib/squeezeboxserver/cache/DownloadedPlugins/NPRRadio.zip does not > exist Hi, if you update / download / activate plugins - please wait after a action like this some secs to allow lms to download all the plugins before hitting the restart lms button. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=108249 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Scanning time for LMS varies widely
jimzak wrote: > I know this doesn't rule out the "Windows theory" but I see a pattern. > > The first rescan of the day is fast and subsequent scans are slower. > > Just observations. I don't have a good theory to explain them. ? jimzak wrote: > Thanks for your reply. > > My cache is on a RAM drive because it's so large. > > I don't notice any problems with performance after a full rescan. ??? [/1/2 OT] I my younger Days i experimented a lot (more than now). Even when i found LMS 7.9 is really fast i'd tried to run my cache in a RAMDisk (in my older days i just run the db in a Ramdisk) I didnt found any difference - except the boot and reboot needs more time to save the RAMdisk to the Harddisk by shutdown and vice verse on a startup. [\1/2 OT] - DONT use a RAMDISK in Windows - Winblows cant handle a RAMdisk - DONT use a RAMDISK on LMS > 7.9 - The DB is already in the RAM DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=108196 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Big argument in favor of doing a full rescan
I do full rescans on a regular base - since lms 7.9 its even faster than ever. But you must not forget that a clean scan always deletes more than just your db. All the cached sites are wiped also - that means the webgui from lms is a little bit slower, cause everything in ./templates had to be rewritten. If you reorganize a bunch from your library files/folders a clean scan is (my) way to go. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=108235 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Podcasts broken again
bullgod wrote: > > > - if only to stop all the what are you running on time-wasting. - I shouldn't need to install dev packages and a compiler onto a > media server. - Now anyone what to fix the failure to parse the rss feed? > > > > - AFAIK listening to Podcasts for Football looks quite similar to this - Nobody told you to do such things... 3.mherger wrote: > *Make sure you install *IO::Socket::SSL *using your package manager*. Mr. Michael aka anybody told you what to fix. Btw: A simple apt-get install libio-socket-ssl-perl is all what you need. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=108195 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Listing All Songs Starting With The Same Letter
steve-g wrote: > Thanks DJanGo - I was hoping to avoid having to use sqlite but it looks > like thats the only way to do it - so thanks for the info on how to do > it. Yapp - maybe Michael is smarter than me, cause i just found the extended search (using title "p%" ) also finds Tracks where any part in the tracknahme starts with P - not only the Track itself. > > Ennio Morricone and Others - Western Graffiti - 114 - 100 000 Dollari > *p*er Ringo (Bruno Nicolai) > Crystal Waters - Ben Liebrand Grandmix 90s Edition - 122 - 100% *P*ure > Love > Yello - Solid Pleasure - 10 - 10 Coast To *P*olka But using sqlite is quite simple. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=108194 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Scanning time for LMS varies widely
jimzak wrote: > Why does it scan at different rates at different times? if you using some plugins like artist information and you add only tracks from already known artists - that plugin didnt need to fetch and manage artist info for these Artists anymore. If you add fresh artist - it had to and needs time. If you using a "dedicated" LMS Server with free ram - (like me) you could expect always nearly the same amount of time for a scan. If you didnt - you cant expect that. If you reboot your lms Server System and do a rescan - it may be faster than a rescan with some ram usage of eg. firefox or similar. In my long time with lms i can tell you RAM & CPU and the way your library is attached to the lms system - that matters for scantime. Debian Strech 81.453 Tracks from 2.549 on a I7 3.8 Ghz System with 8GB Ram needs 31 minutes. Debian Strech 81.453 Tracks from 2.549 on a Pentium M 1.8 Ghz System with 4 GB Ram needs 51 minutes. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=108196 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Listing All Songs Starting With The Same Letter
steve-g wrote: > I'm putting together a quiz for which I need to select some songs whose > title begins with a particular letter. > > I was hoping to do a simple search for say 'P' and get a list of all > titles starting with P - but this doesn't work. > > Can anyone give me any help on how this can be done > > Thanks > > Steve If you use sqlite its quite easy.. Code: select titlesort from tracks where title like 'P%%'; > ..out put tooo long to fit here... DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=108194 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Album art full screen
atca wrote: > Finally solved and working, in browser it looks like below when set to > full screen. Looks great on a large TV and auto updates when the track > changes. > > Accessed by: > http://URL_TO_SERVER:9000/html/SqueezeJS/now.html > > Hi. if you are using more than one player - the url shows always the last used player... Saver way is to add ?player=yo:ur:pl:ay:er:id to the link. eg http://URL_TO_SERVER:9000/html/SqueezeJS/now.html?player=ca:fe:04:dj:an:g0 DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=107963 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Album art full screen
atca wrote:
>
> Screenshot
> 23810
>
funny ...
These are some lines out of your now.html
Code:
background: url("https://sxt.cdn.skype.com/assets/dropzone/saved.png";)
1. Hello
Hello
Adele
DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516
View this thread: http://forums.slimdevices.com/showthread.php?t=107963
___
discuss mailing list
discuss@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Album art full screen
d6jg wrote: > Tried that and it works but how do you determine which player ? Simply by adding the mac adress from the player eg: http://lms-server:9000/music/current/cover.jpg?player=ca:fe:04:dj:an:g0 DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=107963 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Router Issue (MODERATER: Please move post if there is a better section to be in)
If you use the ip from your lms without the port -there is no answer back from the server cause he only uses this port for http. OPen a shell and try to ping the servers ip. Did you use http://ip:9000 or just ip:9000? Use the correct way with http:// DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=107394 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Vortexbox forums & VB Wiki domains dead?
wortgefecht wrote: > I also noticed, the LocalPlayer that comes ootb is called Player1. I can > rename it, but after every reboot, it's called Player1 again. Why? And > how can I change that? are you talking about Vortexbox ootb ? If yes please ask there - imho the vb forums is not offline anymore. If not - where did you change the playername? is there any option like -n player in the localplayerpluginsettingspage set? DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=106668 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] What do I enter under Subject of Interest
th00ht wrote: > Oh, there is a new field in the profile settings dialog: Subject of > interest. What do I write here? Everything I enter gets rejected. ?Here in the Forum? I dont think that the forum is updated cause most of the links in the head are dead. btw: > InterestsEdit Value > Technics; Technix; Linux; Mobiles Is exact the text i'd wrote after i registered here 2006 so the "new" settings are .:confused: DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=107105 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] SB forum Stats
I wouldnt give any money to the Forum stats. Even crawlers are "Users". Since the Vortexboxguys didnt manage to get their Forum up again - some of their Customers are now searching for help here. Btw: All the Links in the Head are outdated. - http://www.logitech.com/speakers_audio/wireless_music_systems - http://www.logitech.com/support DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=106991 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Lost plugins
Hi, if youre using this repo -http://triodeplugins.googlecode.com/svn/trunk/testrepo.xml- - thats gone and may the cause of the lost plugin. Search for some other Versions or fetch the plugin from our Backup. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=106792 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Audio Cross-fading
cparker wrote: > I guess there is some reason for that behaviour but hence the > confusion. > > Thanks for your help AFAIK the players need to "merge" the two audiotracks to one. That needs to be sorted before the next track ist on the way to the player. IMHO the blend works when adding the next track while the actual is playing less than 1/3 or less than the overblendtime. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=106722 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] RadioStream stopps after 20sec. playing and never resumes
Grossmann200 wrote: > The Squeezebox-Receiver connects to the Wlan via DHCP. DHCP is only > activated at the Host-Router from the Client-Bridge-Configuration. > Hence, all Squeezeboxes are connected with the Host-Router. The > Host-Router dd-wrt-WebGui also confirms this and lists all Squeezeboxes. > > *nope* you didnt understand our question there is a room called ssid with two entrances. We "knew" that all your stuff should be in that room called ssid. But we want to know - in which entrace that one device had entered your room. To make this post short: Grab yourself some powerlan devices like TP-Link TL-PA4010PKIT AV500 Powerline Netzwerkadapter and put one into your ISP Router and the other to your Host Bridge (main wlan router) and move these two devices in the neighbourhood of your living room. If you buy them online you can send them back - if its not working - but believe me - its working far better than your actual setup. btw: its always a wise idea to use static ip addresses for static devices. you should limit the dhcp range from eg. 101 to 254 and use static ips for all your non mobile stuff below 100 and leave the rest of the range for your tablets, smartphones whatever. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=106693 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] RadioStream stopps after 20sec. playing and never resumes
Salve, also die "olle" analoge zweidraht Technik hast Du nicht - das hätte es einfacher gemacht. Meine wichtigste oder besser zielführenden Fragen hast du leider übersehen - egal nochmal. Wo hängt der fragliche Player dran ? Sicher an dem Accespoint der daneben steht? Sollte man meinen - muß aber nicht. Häng doch zum Test einfach den einen accespoint (router) ab und reboote den Player, nachdem du ihn näher an den anderen gestellt hast. Und wegen "funktioniert doch ausser..." *lach* ja nee die Technik ist manchmal etwas komplexer, hat aber trotzdem große Reserven auch wenns nicht richtig läuft - merkt man erst bei einem "hochwertigen" Anwendungsfall das es -Grütze- ist - das ist bei dem Gedöhnse halt so. Dieses Wlan ist halt Teufelszeugs - du kannst nie (außer du wohnst in einer verlassenen Gegend wie ich) davon ausgehen, das die kein Nachbar ins Netz spuckt. Obwohl - ein neuer Nachbar - drei neue ssids - jetzt hab ich auch wieder aufrüsten müssen... DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=106693 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] RadioStream stopps after 20sec. playing and never resumes
Grossmann200 wrote: > Regarding my setup? > Well ... I am not a networker and usually I have to fix my technical > "home" problems with the help of the internet :-). I have the situation > that the modem of my ISP is very far away from my desktop computer, > network storage etc. Because of that I connected to ISP-modem a router > configured as a host and in the other room another router configured as > a client. On the client-router I have now connected all my "stuff" > including the RaspberryPi with the Logitech Media Server. If this is a > 1a setup ... I don't know. But it is working. ok how is your isp Router connected? Coax "Cable" or two line "Telephone"? You have to know - how your setup is working and that your 2.nd "router" (its a routing Bridge) in fact halfs your Bandwith cause its acting as sender abd reciever over wlan. I would move the ISP router to your desktop router in case of two wire its a peace of cake in case of coax you'll need the help from the cable provider (the shield between the in House ISP Connection point and your ISP provided Router) must be ~ 95 dB!!! You cannot lengthen or shorten it whitout changing the internal resitor. Or buy some lan over power devices between the ISP Roter and your two Wlan Bridges. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=106693 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] RadioStream stopps after 20sec. playing and never resumes
bpa wrote: > I don't fully understand your network setup. me too ;-) bpa wrote: > How are the two ddwrt connected ? > Do each ddwrt have a wifi nertwork ? > If both ddwrt have a wifi network - do they have differeent ssid ? He talks about Client Bridge Mode -> thats a wlan2wla connection between both bridges (wlan devices) the log told us - dns hickups - that might be "ok" if its @ the same time his ISP gets him a new ip - but who knows. Could you please check that? Error occours @ the same time your ip lease ix new. Please look at your ddwrt - where is the "buggy" device attached to? Do you use same or different channels? DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=106693 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] RadioStream stopps after 20sec. playing and never resumes
Hi, dont go to http://www.mysqueezebox.com/download, - go to http://downloads.slimdevices.com/ your wlan looks very interesting - are you sure its a 1a setup? (i wouldnt do that but of course i am a networker) Is your ddwrt higher than sp1? - if not ->you got it. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=106693 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Synching issues in move from LMS 7.8 to 7.9
donmacn wrote: > > As always, any advice and assistance gratefully received. Hi, a "upgrade" is sometimes not a good idea. Please make a screenshoot from your Plugins - delete all your Plugins and start from scratch. "old" plugins where updated all the time when a newer Version is there. But "old" plugins that are not supported anymore - may causing a busy system. These were not deleted when you upgrade from an "very old" system. DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=106353 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Make my system load the LMS faster please!
mandryka wrote: > The last time I restarted it took 15 minutes for the server to fire up. > what is running in your autostart and services? dhcp or static ip? use static power off your lms server get another system and ping your lms with parameter -t get a smartphone with some timer app start the lms server and start the timer stop the timer when there is a answer tell us that time DJanGo's Profile: http://forums.slimdevices.com/member.php?userid=1516 View this thread: http://forums.slimdevices.com/showthread.php?t=106262 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
