Re: [DNG] [SOLVED] XFCE in Beowulf confuses left and right
Update!! Edit (the) Settings on my Taskbar. Edit Lock Taskbar (was enabled) "Drag & Drop" my Taskbar on primary... Done! *Big Thanks for your help & patience & attention* Michael Am 05.11.20 um 12:03 schrieb kernel panic!: dear terry hello all, Am 03.11.20 um 22:35 schrieb terryc: Do you have arandr loaded? yes => 0.1.9 This isn't a soluton, but 'works' for me, YMMV. In xfce -. right click -> Applications -> Settings -> Display Identify the displays. Set which one you want to be the primary. Make sure it the other is not set as primary. Drag each screen around to the L/R, or up/down relation ship you want. Note, depending on the hardware you have, you can also set resolution and refresh rates. What doesn't work for me is the every morning, I then have a pop up that asks e to chose between mirror or extend right, then I have to close two popups. What is in your dual-monitor.sh? #!/bin/sh xrandr --output VGA-1 --mode 1680x1050 --pos 925x1080 --rotate normal --output DP-2 --off --output DP-1 --off --output HDMI-1 --primary --mode 1920x1080 --pos 0x0 --rotate normal --output HDMI-2 --off After a long time of trial and error, I now have nearly my settings back. But, although the HDMI monitor is the primary in "arandr". Is my XFCE taskbar on the small monitor (VGA) If I could teach the XFCE to display the bar only on the primary monitor, I would be happy. ;-) BTW: my VGA "Card" is: VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) On my MoBo i have two Outputs: HDMI & VGA salve michael ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
Re: [DNG] XFCE in Beowulf confuses left and right
dear terry hello all, Am 03.11.20 um 22:35 schrieb terryc: Do you have arandr loaded? yes => 0.1.9 This isn't a soluton, but 'works' for me, YMMV. In xfce -. right click -> Applications -> Settings -> Display Identify the displays. Set which one you want to be the primary. Make sure it the other is not set as primary. Drag each screen around to the L/R, or up/down relation ship you want. Note, depending on the hardware you have, you can also set resolution and refresh rates. What doesn't work for me is the every morning, I then have a pop up that asks e to chose between mirror or extend right, then I have to close two popups. What is in your dual-monitor.sh? #!/bin/sh xrandr --output VGA-1 --mode 1680x1050 --pos 925x1080 --rotate normal --output DP-2 --off --output DP-1 --off --output HDMI-1 --primary --mode 1920x1080 --pos 0x0 --rotate normal --output HDMI-2 --off After a long time of trial and error, I now have nearly my settings back. But, although the HDMI monitor is the primary in "arandr". Is my XFCE taskbar on the small monitor (VGA) If I could teach the XFCE to display the bar only on the primary monitor, I would be happy. ;-) BTW: my VGA "Card" is: VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) On my MoBo i have two Outputs: HDMI & VGA salve michael ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
[DNG] Fwd: XFCE in Beowulf confuses left and right
hello terry, it was excatly what I'm doing! but, the "software" does not was i want... take a look to the pics. fig0 shows you what i see if i start arandr i drag and drop the 20" on the right place an activate it.. fig0 https://paste.pics/249c3c9442769f3adc16ec1c0a8762bc look fig1 - something pushes the two monitors on top of each other. and i can't change that anymore?! fig1 https://paste.pics/f906405255785a438f2ed66b63e98cb6 very strange: the same happens by arandr or xrandr !! clueless michael Am 03.11.20 um 22:35 schrieb terryc: On Tue, 3 Nov 2020 11:56:33 +0100 kernel panic! wrote: Update! I "dig" through my Backup(s) - Bingo! I found a File *dualmonitor.sh* I put it back to/home/$USER/.screenlayout/dualmonitor.sh Logout from XFCE, login back nothing happens Folder.screenlayout =drwxr-xr-x Filedualmonitor.sh = -rwx-- maybe it is someone of the permissions? desperate Michael Am 31.10.20 um 16:14 schrieb Michael K.: Heyho, I have setup a Desktop with Beowulf and XFCE. The install was done with only one Monitor (Acer 24" HDMI) I put on a other Monitor (Acer 20" VGA) and yes i get "Figure 3. Configure new displays dialog." (*) In this display dialog i see the first "confuses of left and right" The 20" stands *left* from 24" (for medical reasons i need it) I drag and drop the Icons to te right places, how my monitors are positioned. I set 24" as default. And XFCE use the 20" as default?! 24" shows only the default XFCE Background. (***) "if i want to reach the monitor left with the mouse i have to move the mouse to the right." Although, the 24" is the *default* Monitor XFCE give me the Menu and other Desktop Items on the small one 20" ?? E.g. open Thunar I *disable* the Small on 20", and the Monitor Icon for the 20" goes automatically to the right side. See screenshot (**) I make this settings as a "normal user" non root privileges. (***) what can I do to make this program do what I want? Thank you in advance and have a nice weekend Michael Do you have arandr loaded? This isn't a soluton, but 'works' for me, YMMV. In xfce -. right click -> Applications -> Settings -> Display Identify the displays. Set which one you want to be the primary. Make sure it the other is not set as primary. Drag each screen around to the L/R, or up/down relation ship you want. Note, depending on the hardware you have, you can also set resolution and refresh rates. What doesn't work for me is the every morning, I then have a pop up that asks e to chose between mirror or extend right, then I have to close two popups. What is in your dual-monitor.sh? ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
Re: [DNG] XFCE in Beowulf confuses left and right
Update! I "dig" through my Backup(s) - Bingo! I found a File *dualmonitor.sh* I put it back to/home/$USER/.screenlayout/dualmonitor.sh Logout from XFCE, login back nothing happens Folder.screenlayout =drwxr-xr-x Filedualmonitor.sh = -rwx-- maybe it is someone of the permissions? desperate Michael Am 31.10.20 um 16:14 schrieb Michael K.: Heyho, I have setup a Desktop with Beowulf and XFCE. The install was done with only one Monitor (Acer 24" HDMI) I put on a other Monitor (Acer 20" VGA) and yes i get "Figure 3. Configure new displays dialog." (*) In this display dialog i see the first "confuses of left and right" The 20" stands *left* from 24" (for medical reasons i need it) I drag and drop the Icons to te right places, how my monitors are positioned. I set 24" as default. And XFCE use the 20" as default?! 24" shows only the default XFCE Background. (***) "if i want to reach the monitor left with the mouse i have to move the mouse to the right." Although, the 24" is the *default* Monitor XFCE give me the Menu and other Desktop Items on the small one 20" ?? E.g. open Thunar I *disable* the Small on 20", and the Monitor Icon for the 20" goes automatically to the right side. See screenshot (**) I make this settings as a "normal user" non root privileges. (***) what can I do to make this program do what I want? Thank you in advance and have a nice weekend Michael (*) https://docs.xfce.org/xfce/xfce4-settings/4.12/display (**) https://paste.pics/d4c5304aad0b59d810705756c06c5774 (***) https://paste.pics/22edd79281ed949a7d48419688d5c927 ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
Re: [DNG] PSI+ (Qt) on XFCE (GTK) on Beowulf
Thanks all Hello Guy's, I solved this on this way: Didier: "Don't know if it would work to add XDG_RUNTIME_DIR to this file. That's just some black magic I would try." "It works 4 me!" ;-) ¡Sigue libre! Michael Am 19.02.20 um 09:42 schrieb tom: > On Tue, 18 Feb 2020 10:30:11 +0100 > Didier Kryn wrote: > >> Le 18/02/2020 à 10:02, kernel panic! a écrit : >>> Hello freedom Heroes, >>> >>> i will use PSI+ on my Beowulf, XFCE. if i start it on XFCE "nothing >>> happend" The "XDG Runtime Dir" never exist on GTK? >>> >>> >>>> :~$ psi-plus >>>> [20200218 9:25:18] W:QStandardPaths: XDG_RUNTIME_DIR not set, >>>> defaulting to '/tmp/runtime-michael' (unknown:0, unknown) >>>> >>>> >>> Can i make this via hand? Or any other Idea? >>> >>> Thanks in Advaced >>> >>> Michael >>> >> Many XDG_*_DIR are declared in $HOME/.config/user-dirs.dirs >> >> I know that if you want one of them to *not* be created, it >> doesn't work to just delete the line; the only way is to declare it >> as some already existing directory, eg $HOME. >> >> Don't know if it would work to add XDG_RUNTIME_DIR to this file. >> That's just some black magic I would try. >> >> Happy if it helps. >> >> Didier >> >> >> ___ >> Dng mailing list >> Dng@lists.dyne.org >> https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng > > Hey, I don't know for sure if this is the same issue your having, but I > have compiled psi-plus by hand on ASCII and been in contact with the > devs. If you do it on ASCII you must set the chat type to BASIC not > WEBKIT. This is because there is some javascript functions in the > webkit edition that do not work with the older version of webkit that > comes with ASCII. BASIC is fine enough for most cases and certainly a > lot more ram efficient but this could also be fixed by someone > adjusting the javascript to not use such new functions. It just not has > been important enough to do yet for anyone and BASIC is good enough for > most. > ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
[DNG] [Solved] Re: Gajim an GnuPG Fuckup
Thanks Dimitris, Yes, in a upper Version Gajim works.. But, i have found a "other GNUpg" Bug. By solving this (erase *.lock files) gajim will work in beowulf again :-) Greetz Michael Am 18.02.20 um 14:43 schrieb Dimitris via Dng: > On 2/18/20 11:02 AM, kernel panic! wrote: >> I have "delete" the gajim-pgp extension (in synaptic) but the errormsg >> will remain the same.. > > > no problem in ceres. > just installed gajim-pgp from ceres (1.2.24-1) and already have gajim > version 1.1.3-2, without such errors. > maybe you have installed the plugin from plugin-installer inside gajim? > ( menu gajim -> plugins ) ? > > > ___ > Dng mailing list > Dng@lists.dyne.org > https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng > ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
[DNG] Gajim an GnuPG Fuckup
Hello freedom Heroes, I use: Beowulf (4.19.0-8-amd64) XFCE and Gajim 1.1.2-2 I have "delete" the gajim-pgp extension (in synaptic) but the errormsg will remain the same.. i can only kill gajim.. thanks for help michael > 18.02.2020 09:42:26 (D) gajim.c.gnupg stderr reader: initial daemon)> > 18.02.2020 09:42:26 (D) gajim.c.gnupg closed output, 897 bytes sent > 18.02.2020 09:42:26 (D) gajim.c.gnupg stdout reader: initial daemon)> > 18.02.2020 09:42:26 (D) gajim.c.gnupg [GNUPG:] NEWSIG > 18.02.2020 09:42:26 (D) gajim.c.gnupg message ignored: NEWSIG, > 18.02.2020 09:42:26 (D) gajim.c.gnupg gpg: Signatur vom Sa 15 Feb 2020 > 13:08:46 CET > 18.02.2020 09:42:26 (D) gajim.c.gnupg gpg:mittels > RSA-Schlüssel 23EEF484FDF8291CBA09A40625FE376FF17694A1 > 18.02.2020 09:42:26 (D) gajim.c.gnupg [GNUPG:] KEY_CONSIDERED > 23EEF484FDF8291CBA09A40625FE376FF17694A1 0 > 18.02.2020 09:42:26 (D) gajim.c.gnupg message ignored: KEY_CONSIDERED, > 23EEF484FDF8291CBA09A40625FE376FF17694A1 0 > 18.02.2020 09:42:26 (D) gajim.c.gnupg [GNUPG:] SIG_ID > 7lR977oRNmcWZ4o2ZOdav/ZEdrA 2020-02-15 1581768526 > 18.02.2020 09:42:26 (D) gajim.c.gnupg [GNUPG:] KEY_CONSIDERED > 23EEF484FDF8291CBA09A40625FE376FF17694A1 0 > 18.02.2020 09:42:26 (D) gajim.c.gnupg message ignored: KEY_CONSIDERED, > 23EEF484FDF8291CBA09A40625FE376FF17694A1 0 > 18.02.2020 09:42:27 (D) gajim.c.gnupg gpg: "Trust-DB" wird überprüft > 18.02.2020 09:42:33 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:42:33 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:42:41 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:42:41 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:42:57 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:43:13 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:43:13 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:43:29 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:43:29 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:43:37 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:43:37 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:43:53 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:44:09 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:44:09 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:44:25 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:44:25 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:44:33 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:44:33 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:44:49 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:45:05 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:45:05 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:45:21 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:45:21 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:45:29 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:45:29 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:45:45 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:46:01 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:46:01 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:46:17 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:46:17 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:46:25 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:46:25 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:46:41 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:46:58 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:46:58 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:47:14 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:47:14 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:47:22 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:47:22 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:47:38 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:47:54 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:47:54 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:48:10 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09:48:10 (D) gajim.c.gnupg gpg: waiting for lock (held by 7306) ... > 18.02.2020 09
[DNG] PSI+ (Qt) on XFCE (GTK) on Beowulf
Hello freedom Heroes, i will use PSI+ on my Beowulf, XFCE. if i start it on XFCE "nothing happend" The "XDG Runtime Dir" never exist on GTK? > :~$ psi-plus > [20200218 9:25:18] W:QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to > '/tmp/runtime-michael' (unknown:0, unknown) > > Can i make this via hand? Or any other Idea? Thanks in Advaced Michael -- In a world without fences, who needs GATES? In a world without walls, who needs WINDOWS? ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
[DNG] pulseaudio - No Sytemsounds
Dear Readers, what must i do to get systemsounds on Devuan? (ASCII) Yes, i have turn "ON" systemsounds in my XFCE Setting. pls, download or take a look to my pulsaudio-mike.txt file from our LUG (Nextcloud, Self Hostet) https://cloud.belug.de/nextcloud/index.php/s/jStHAsTGQPNC2Mp THX! Michael ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
Re: [DNG] A telegram group
What is your Problem whit IRC?? https://botbot.me/freenode/devuan/ Am 27.06.2018 um 08:07 schrieb Elvis Contreras: > Hi guys I've just opened a telegram group in order to share experiences >and > all kind of stuff related to devuan. You can join if you are >interested to > https://t.me/joinchat/CHt0wxJ3lbwrWoW aaand, by the way: https://media.ccc.de/v/gpn16-7582-run_your_own_fucking_infrastructure Ahoj Michael #fuckoffgoogle https://fuckoffgoogle.de/ ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
[DNG] always: i can't open a Link in a email
Hello again, my problem still alive: I cann't open a Link (URL) by click in a Thunderbird message with my default Browser (Firefox) My investigation has shown thats my MIME Table is (maybe) "broken" When I start Thunderbird and take a look at the Settings for MIME I get an *empty* Window. Pls, take a look at the Screenshot here (Also in a fresh and clean Profile!) https://support.mozilla.org/de/questions/1218689 I put an "old mimetype.rdf" File (from a Backup to my /home/username/.thunderbird Folder. (In my actual Profile I haven't had a mimetype.rdf file?) But that didn't help. On a (Bash) Shell I attempted to repair the MIME Types > :~$ thunderbird --fixmime > INFO -> No fix up for /home/user/.thunderbird/fp37v4sr.default/mimeTypes.rdf > needed. > INFO -> No fix up for /home/user/.config/mimeapps.list needed. > INFO -> No fix up for /home/user/.local/share/applications/mimeapps.list > needed. > find: ‘/home/user/.local/share/applications/’: Datei oder Verzeichnis nicht > gefunden > INFO -> No backups related to the Icedove to Thunderbird transition found. The fixmime command searched in different folders than my MIME Settings are?! (I use XFCE from Devuan Pacets) I have the path: /home/user/.local/share/mime/application/(Empty Folder) A search through my whole system shows me: I don't have a file named "mimeapps.list" in any folder?! What can I do to get back the feature: click on a link in a (thunderbird) message to open this link in my default (firefox) Browser? Thanks 4 any hints desperate Mike ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
Re: [DNG] Thunderbird don't open Links in Firefox
Hello, Am 23.05.2018 um 10:35 schrieb Irrwahn: > I remember having had a somewhat similar issue before. In my case it > was caused by apparmor rules for Thunderbird. No idea if this could > be the root for your problem, too. i have take a look... on my system in /etc/appamor.d/ => i have a file "usr.bin.thunderbird" But, also in /etc/appamor.d/disabled => a file name: @usr.bin.thunderbird Maybe i must only delete the disable "rule" and make a reboot ?! 8-) Greetz Mike ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng
[DNG] Thunderbird don't open Links in Firefox
Hello all, i use the default Devuan Setup whit XFCE Desktop. My default Mailhandler is Thunderbird (from Devuan Source) and my default Browser is Firefox (also from Devuan Source) I can't open any Link in a Mail on "a click" I have no glue why. Yesterday i open a Question on Mozilla Support (0) But, maybe the problem is deper inside?! You can see in the Link a screenshot from Thunderbird. My "Attatchment panel" is empty!? My xfce4-verbose.log (on /home/$USER) > TRACE[xfsm-properties.c:629] xfsm_properties_set_from_smprop(): -> Set strv > (RestartCommand) > TRACE[xfsm-properties.c:629] xfsm_properties_set_from_smprop(): -> Set strv > (CloneCommand) > TRACE[xfsm-properties.c:489] xfsm_properties_set_string(): -> Set string > (Program, thunderbird) > TRACE[xfsm-properties.c:489] xfsm_properties_set_string(): -> Set string > (UserID, michael) > TRACE[sm-layer.c:304] sm_save_yourself_done(): Client Id = > 2e2b8875e-fd80-4e33-ab0e-2244e57bca58, received SAVE YOURSELF DONE [Success = > True] > > TRACE[xfsm-manager.c:1295] xfsm_manager_save_yourself_done(): > enteringTRACE[sm-layer.c:162] sm_new_client(): ICE connection fd = 23, > received NEW CLIENT > > TRACE[sm-layer.c:213] sm_register_client(): ICE connection fd = 23, received > REGISTER CLIENT [Previous Id = None] > > TRACE[xfsm-properties.c:629] xfsm_properties_set_from_smprop(): -> Set strv > (RestartCommand) > TRACE[xfsm-properties.c:629] xfsm_properties_set_from_smprop(): -> Set strv > (CloneCommand) > TRACE[xfsm-properties.c:489] xfsm_properties_set_string(): -> Set string > (Program, firefox) > TRACE[xfsm-properties.c:489] xfsm_properties_set_string(): -> Set string > (UserID, michael) > TRACE[sm-layer.c:304] sm_save_yourself_done(): Client Id = > 23beae1cd-5616-4b2f-898d-351e1d00c048, received SAVE YOURSELF DONE [Success = > True] > > TRACE[xfsm-manager.c:1295] xfsm_manager_save_yourself_done(): > enteringTRACE[xfsm-manager.c:428] xfsm_manager_handle_failed_properties(): > Client Id 23beae1cd-5616-4b2f-898d-351e1d00c048 exited, removing from session. > TRACE[sm-layer.c:162] sm_new_client(): ICE connection fd = 23, received NEW > CLIENT > > TRACE[sm-layer.c:213] sm_register_client(): ICE connection fd = 23, received > REGISTER CLIENT [Previous Id = None] > > TRACE[xfsm-properties.c:629] xfsm_properties_set_from_smprop(): -> Set strv > (RestartCommand) > TRACE[xfsm-properties.c:629] xfsm_properties_set_from_smprop(): -> Set strv > (CloneCommand) > TRACE[xfsm-properties.c:489] xfsm_properties_set_string(): -> Set string > (Program, firefox) > TRACE[xfsm-properties.c:489] xfsm_properties_set_string(): -> Set string > (UserID, michael) > TRACE[sm-layer.c:304] sm_save_yourself_done(): Client Id = > 270270ee3-cc60-456b-8dc0-a621e85fc3b6, received SAVE YOURSELF DONE [Success = > True] > > TRACE[xfsm-manager.c:1295] xfsm_manager_save_yourself_done(): entering Today i have see my "clipbord get crasy" Copy and Paste *don't work only between Thunderbird and Firefox" ? Here a part of my xerrors log > (xfce4-clipman:3162): Gdk-CRITICAL **: gdk_window_get_device_position_double: > assertion 'GDK_IS_WINDOW (window)' failed > > (xfce4-clipman:3162): Gdk-CRITICAL **: gdk_window_get_device_position_double: > assertion 'GDK_IS_WINDOW (window)' failed > > (xfce4-clipman:3162): Gdk-CRITICAL **: gdk_window_get_device_position_double: > assertion 'GDK_IS_WINDOW (window)' failed What must i do to get a "working system" between Thunderbird and Firefox? Thanks in Advaced Michael (0) https://support.mozilla.org/en-US/questions/1218689#answer-1114335 ___ Dng mailing list Dng@lists.dyne.org https://mailinglists.dyne.org/cgi-bin/mailman/listinfo/dng