[Drakelist] 10 meters for the Drake L7

2012-06-30 Thread Gudguyham
Hello everyone,  new to the list.  I'd like to know if anyone has  or knows 
where to get an authorized bulletin from Drake outlining the procedure  for 
enabling 10 meters on the L7 amplifier.  I've seen a blurb about it  on 
the Internet but nothing that seems to be Drake authorized.  Although I  have 
done the modification as shown in the blurb I am not liking the input swr  
results I am getting on 15 and 10 meters now.  On 160-20m my amp has a dead  
flat input swr, but not on 15 and 10.  I have questions.  If no  bulletins 
had been issued and anyone has done this mod with greater success than  I, 
please let me know.  Thanks, 73 Lou W1QJ___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist


Re: [Drakelist] 10 meters for the Drake L7

2012-06-30 Thread K9sqg
Lou,


Well, it depends.  There are at least three ways the L7 bandswich was locked 
out from 10 meters; I assume you found the way to undo yours.



For the L7s I've serviced, I found two different results with no consistent 
explanation for the differences.  In one case, you do the mod by adding the two 
68 pf caps, etc. and then retune the input coil per the instructions.  In the 
other case, adding the 68 pf caps is not necessary, and the input coil doesn't 
always need to be adjusted.  Both procedures seem to work, depending...



73,




Evan, K9SQG


-Original Message-
From: Gudguyham gudguy...@aol.com
To: drakelist drakelist@zerobeat.net
Sent: Sun, Jul 1, 2012 12:01 am
Subject: [Drakelist] 10 meters for the Drake L7


Hello everyone,  new to the list.  I'd like to know if anyone has or knows 
where to get an authorized bulletin from Drake outlining the procedure for 
enabling 10 meters on the L7 amplifier.  I've seen a blurb about it on the 
Internet but nothing that seems to be Drake authorized.  Although I have done 
the modification as shown in the blurb I am not liking the input swr results I 
am getting on 15 and 10 meters now.  On 160-20m my amp has a dead flat input 
swr, but not on 15 and 10.  I have questions.  If no bulletins had been issued 
and anyone has done this mod with greater success than I, please let me know.  
Thanks, 73 Lou W1QJ
 
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist

 
___
Drakelist mailing list
Drakelist@zerobeat.net
http://mailman.zerobeat.net/mailman/listinfo/drakelist