Re: [drakelist] Re-attaching Drake MS-4 Logo to Speaker Grill
Hi Wade, A thin application of silicone sealant betwixt the two surfaces should do the job A-OK, and THEN some... ~73!~ Eddy VE3CUI - VE3XZ * - Original Message - From: wmacleod To: [EMAIL PROTECTED] Sent: Saturday, April 12, 2008 3:29 PM Subject: [drakelist] Re-attaching Drake MS-4 Logo to Speaker Grill Hi Drakelist Does anyone have any suggestions on the best way to re-attach the Drake MS-4 Logo to the speaker grill? The original backing was a form of adhesive which has dried out over the years. I was thinking about the following alternatives: (1) Double sided tape - might leave a gap between the logo and the metal grill? (2) Soft glue stick like the kind used on scrapbook projects - would it last? (3) Crazy Glue - might be a problem if it did not adhere to the metal paint? Appreciate any recommendations. thanks Wade
RE: [drakelist] Re-attaching Drake MS-4 Logo to Speaker Grill
An excellent idea! That stuff is soft when it goes on, doesn't dry right away so I get a chance to position it correctly and adheres to almost any surface. Thanks Eddy! 73 Wade VA3HM _ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of EP Swynar Sent: April 12, 2008 3:47 PM To: [EMAIL PROTECTED] Subject: Re: [drakelist] Re-attaching Drake MS-4 Logo to Speaker Grill Hi Wade, A thin application of silicone sealant betwixt the two surfaces should do the job A-OK, and THEN some... ~73!~ Eddy VE3CUI - VE3XZ * - Original Message - From: wmacleod mailto:[EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Saturday, April 12, 2008 3:29 PM Subject: [drakelist] Re-attaching Drake MS-4 Logo to Speaker Grill Hi Drakelist Does anyone have any suggestions on the best way to re-attach the Drake MS-4 Logo to the speaker grill? The original backing was a form of adhesive which has dried out over the years. I was thinking about the following alternatives: (1) Double sided tape - might leave a gap between the logo and the metal grill? (2) Soft glue stick like the kind used on scrapbook projects - would it last? (3) Crazy Glue - might be a problem if it did not adhere to the metal paint? Appreciate any recommendations. thanks Wade
Re: [drakelist] Re-attaching Drake MS-4 Logo to Speaker Grill
A few small dabs of hot glue will work also, dries fast not much needed. 73... Rich WA2RQY PS- i've used double sided tape also, eh, ok! ** It's Tax Time! Get tips, forms and advice on AOL Money amp; Finance. (http://money.aol.com/tax?NCID=aolcmp0030002850)
Re: [drakelist] Re-attaching Drake MS-4 Logo to Speaker Grill
john [EMAIL PROTECTED] made an utterance to the drakelist gang -- Or a couple dabs of rubber cement... John K5MO At 03:47 PM 4/12/2008, you wrote: Hi Wade, A thin application of silicone sealant betwixt the two surfaces should = do the job A-OK, and THEN some... ~73!~ Eddy VE3CUI - VE3XZ * WARNING: The remainder of this message has not been transferred. The estimated size of this message is 10909 bytes. Click on the Retrieve From Server icon above and check mail again to get the whole thing. (If you're reading this in the preview pane, you'll need to open the message to see the icon.) If the Retrieve From Server icon is not showing, then this message is no longer on the server. -- Submissions:[EMAIL PROTECTED] Unsubscribe:[EMAIL PROTECTED] - unsubscribe drakelist in body Hopelessly Lost:[EMAIL PROTECTED] - help in body of message Zerobeat Web Page: www.zerobeat.net - sponsored by www.tlchost.net --
Re: [drakelist] Re-attaching Drake MS-4 Logo to Speaker Grill
[EMAIL PROTECTED] writes: Appreciate any recommendations. thanks Wade I'd use contact adhesive. Hair dryer would get it back off in the future if I had to. **It's Tax Time! Get tips, forms and advice on AOL Money Finance. (http://money.aol.com/tax?NCID=aolcmp0030002850)
