At least one panel hooked up to the bridge (AUO B116XAK01) only
supports 1 lane of DP.  Let's read this information and stop
hardcoding 4 DP lanes.

Signed-off-by: Douglas Anderson <diand...@chromium.org>
---

 drivers/gpu/drm/bridge/ti-sn65dsi86.c | 32 +++++++++++++++++++++++++--
 1 file changed, 30 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/bridge/ti-sn65dsi86.c 
b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
index d55d19759796..0fc9e97b2d98 100644
--- a/drivers/gpu/drm/bridge/ti-sn65dsi86.c
+++ b/drivers/gpu/drm/bridge/ti-sn65dsi86.c
@@ -313,8 +313,7 @@ static int ti_sn_bridge_attach(struct drm_bridge *bridge)
                goto err_dsi_host;
        }
 
-       /* TODO: setting to 4 lanes always for now */
-       pdata->dp_lanes = 4;
+       /* TODO: setting to 4 MIPI lanes always for now */
        dsi->lanes = 4;
        dsi->format = MIPI_DSI_FMT_RGB888;
        dsi->mode_flags = MIPI_DSI_MODE_VIDEO;
@@ -511,12 +510,41 @@ static void ti_sn_bridge_set_video_timings(struct 
ti_sn_bridge *pdata)
        usleep_range(10000, 10500); /* 10ms delay recommended by spec */
 }
 
+static unsigned int ti_sn_get_max_lanes(struct ti_sn_bridge *pdata)
+{
+       u8 data;
+       int ret;
+
+       ret = drm_dp_dpcd_readb(&pdata->aux, DP_MAX_LANE_COUNT, &data);
+       if (ret != 1) {
+               DRM_DEV_ERROR(pdata->dev,
+                             "Can't read lane count (%d); assuming 4\n", ret);
+               return 4;
+       }
+
+       return data & DP_LANE_COUNT_MASK;
+}
+
 static void ti_sn_bridge_enable(struct drm_bridge *bridge)
 {
        struct ti_sn_bridge *pdata = bridge_to_ti_sn_bridge(bridge);
        unsigned int val;
        int ret;
 
+       /*
+        * Run with the maximum number of lanes that the DP sink supports.
+        *
+        * Depending use cases, we might want to revisit this later because:
+        * - It's plausible that someone may have run fewer lines to the
+        *   sink than the sink actually supports, assuming that the lines
+        *   will just be driven at a higher rate.
+        * - The DP spec seems to indicate that it's more important to minimize
+        *   the number of lanes than the link rate.
+        *
+        * If we do revisit, it would be important to measure the power impact.
+        */
+       pdata->dp_lanes = ti_sn_get_max_lanes(pdata);
+
        /* DSI_A lane config */
        val = CHA_DSI_LANES(4 - pdata->dsi->lanes);
        regmap_update_bits(pdata->regmap, SN_DSI_LANES_REG,
-- 
2.24.1.735.g03f4e72817-goog

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

Reply via email to