[Dx4win] LoTw- DXCC submission
Hello I have uploaded my log to LoTw without any problem using DX4WIN. I have also downloaded the LoTw QSL file and updated the ConfirmUpload field ok. So far so good. Please let me know what happens after a DXCC submission using LoTw. Is there a file to download and a method to set the CHECKED flag for each QSOs that has been checked ? Thanks Fred PY2XB
[Dx4win] LoTw- DXCC submission
--- [EMAIL PROTECTED] wrote: Please let me know what happens after a DXCC submission using LoTw. Is there a file to download and a method to set the CHECKED flag for each QSOs that has been checked ? No. -- Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.us From [EMAIL PROTECTED] Thu Aug 24 14:43:56 2006 From: [EMAIL PROTECTED] (ON4AOI) Date: Thu Aug 24 14:58:02 2006 Subject: [Dx4win] LoTw- DXCC submission In-Reply-To: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] Hi Fred, There is no file to download after the submission But via a work around it should be possible reach What you need. I never did it but have to do in the near future. This is how I would do it. FIRST MAKE A BACKUP . With F8 search for qso's where Upl Cnf = Y Go to reports | DXCC | SUBMISSION Now you will get a list from those qso's that will Be marked SUBM under DXCC mixed,band or mode You can compare these with the list on LOTW and make changes if Needed After your submission via LOTW is OK You make the same selection again with F8 for qso's where Upl Cnf = Y Then go to REPORTS | CHANGE AWARD FLAGS | AWARD (select dxcc band) ACTION | submitted checked Click on CHANGE REPORTS | CHANGE AWARD FLAGS | AWARD (select dxcc mode) ACTION | submitted checked Click on CHANGE REPORTS | CHANGE AWARD FLAGS | AWARD (select dxcc mixed) ACTION | submitted checked Click on CHANGE This should work normally. 73 Guy ON4AOI BAND DECODER and related stuff at http://www.on4aoi.be/banddecoder.htm DX4WIN soft and related stuff at http://www.on4aoi.be/dx4win.htm DX4WIN, WRITELOG, WF1B RITTY CW RTTY interfaces at http://www.on4aoi.be/keyer.htm ARSWIN link and related stuff at http://www.on4aoi.be/web7.htm DXTELNET soft and related stuff at http://www.on4aoi.be/dxt.htm -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Thursday, August 24, 2006 6:28 PM To: Dx4win@mailman.qth.net Subject: [Dx4win] LoTw- DXCC submission Hello I have uploaded my log to LoTw without any problem using DX4WIN. I have also downloaded the LoTw QSL file and updated the ConfirmUpload field ok. So far so good. Please let me know what happens after a DXCC submission using LoTw. Is there a file to download and a method to set the CHECKED flag for each QSOs that has been checked ? Thanks Fred PY2XB ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] USB Radio control?
Good Evening, I was looking at USB to TTL communications cable. I know they also have USB to Serial devices. Has any one tried to setup the radio for USB? Can it be setup for USB? I know there are no choices or USB in the preferences. TNX Will NA2NA telnet://na2na.net From [EMAIL PROTECTED] Thu Aug 24 21:07:59 2006 From: [EMAIL PROTECTED] (George) Date: Thu Aug 24 21:22:04 2006 Subject: [Dx4win] DX4WIN_Rotor-EZ Message-ID: [EMAIL PROTECTED] Anyone know what I should put in the hand shake box under the control of the preferences in DX4WIN??? So far I can't make DX4WIN turn my rotor. Thanks. George From [EMAIL PROTECTED] Thu Aug 24 21:08:04 2006 From: [EMAIL PROTECTED] (Robert Naumann) Date: Thu Aug 24 21:22:07 2006 Subject: [Dx4win] USB Radio control? In-Reply-To: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] Bill, Typically, when you use a USB to serial interface, the software sets up a virtual com port. You then set your software to use that virtual port - not USB. 73, Bob W5OV -Original Message- From: William Liporace - NA2NA [mailto:[EMAIL PROTECTED] Sent: Thursday, August 24, 2006 7:52 PM To: DX4WIN POSTINGS Subject: [Dx4win] USB Radio control? Good Evening, I was looking at USB to TTL communications cable. I know they also have USB to Serial devices. Has any one tried to setup the radio for USB? Can it be setup for USB? I know there are no choices or USB in the preferences. TNX Will NA2NA telnet://na2na.net ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] DX4WIN_Rotor-EZ
Hi George, Using DX4WIN with the Rotor-EZ card in my Yaesu G-1000SDX, the Message handshake is: ThunderForm|ARSWIN Hope that helps! 73, Joe WD?M At 07:07 PM 8/24/2006, George wrote: Anyone know what I should put in the hand shake box under the control of the preferences in DX4WIN??? So far I can't make DX4WIN turn my rotor. Thanks. George From [EMAIL PROTECTED] Fri Aug 25 09:01:00 2006 From: [EMAIL PROTECTED] ([EMAIL PROTECTED]) Date: Fri Aug 25 09:15:29 2006 Subject: [Dx4win] dxcc submission Message-ID: [EMAIL PROTECTED] Guy, thanks for the info Fred
