[Dx4win] Macro for Logged Callsign
Is there any macro for logged callsign so that I can print SWL card reply with the written text such as IN QSO with [logged callsign], pse? TNX es HNY 2012. 73 de Jo, YC0LOW __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Data updates coming tonight
Many TNX, Jim. Appreciate your hard works for us, the DX4WIN users. 73 de Jo, YC0LOW On Tue, Dec 6, 2011 at 12:14 AM, Jim Reisert AD1C jjreis...@alum.mit.eduwrote: It's been a crazy last couple of weeks, but I hope to release data updates tonight (after 04z 6 Dec.): - country file (includes QSL managers and manager addresses) - award database - membership list (eQSL and LoTW users) - master callsigns (from contest Super Check Partial) The list of DX cluster nodes is updated constantly. Several nodes have dropped off recently, most notably K1EA after over twenty years of service. The DX4WIN Calendar is updated weekly, I assume they are still coming out. This will probably be the last update for 2011, though I may push out an updated membership list early the week of December 18th. 73 - Jim AD1C -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] 7Z1 (Saudi Arabia) doesn't show in New CTY file
Jim, et.al Tnx for emails Just checked my Preferences. Worked Cutoff and Mailed Cutoff were already set to 0, User Level is set to Expert My 160m CW QSO with 7Z1SJ was in 15th January 2011. If I go to Reports|Report Generator|DXCC Listing, I only found 7X Algeria and 8P Barbados in the Prefix column. Nothing on 7Z between those two prefixes. But, in Summary, I found the call as Worked. I am I doing wrong in putting the new CTY files? Tnx es 73 de Jo, YC0LOW On Tue, Feb 8, 2011 at 6:18 AM, Jim Reisert AD1C jjreis...@alum.mit.eduwrote: On Fri, Feb 4, 2011 at 2:20 AM, Jo, YC0LOW yc0...@gmail.com wrote: Just upgraded my CTY files with the latest Feruary 2011 version. But I still didn't have the contact status with 7Z1SJ call as Worked (in Summary Report) nor in DXCC Listing. the L (=Labelled) mark appears in HZ listing. Using v 8.04. Hi Jo, I just got back from holiday. When did you make the QSO with 7Z1SJ? Please check your preferences, Worked Cutoff and Mailed Cutoff. Make sure both are set to 0. This sets the number of days that something will be considered as worked. If older than that, it is as if you never made the QSO at all. Some people like their DXCC needed list to always be considered NEEDED (never worked) if a QSL has not been received in a very long time. 73 - Jim AD1C -- Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] 7Z1 (Saudi Arabia) doesn't show in New CTY file
Just upgraded my CTY files with the latest Feruary 2011 version. But I still didn't have the contact status with 7Z1SJ call as Worked (in Summary Report) nor in DXCC Listing. the L (=Labelled) mark appears in HZ listing. Using v 8.04. Please help. Tnx es 73 de Jo, YC0LOW __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] Error messages
When keying CW, I sometimes had consecutive two error mesages as follows: a. Could not open COM8 for keying:ie_Open - device already open. and then: b. Radio time out. Radio interface has been disabled To restore it, I must re-open the software in my notebook. I am using ver 8.04 with Windows 7 as the OS. I used a homemade interface made of two pcs of transistors 2N and two resistors 1.2k to my Icom 746Pro with cable USB 2.0 to serial that has FTDI chipset. Could someone help me to explain what would be the cause, please? Tnx es 73 de Jo, YC0LOW __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Error messages
Hi Kostas and Dave, Many thanks for your responses. Dave, it happened only in the middle of the usage i.e: when the programme is running. Booting up process is always going fine. I never had problems whatsoever when using the software in my older laptop which its OS was Windows XP. Tnx es 73 de Jo, YC0LOW On Wed, Sep 15, 2010 at 9:50 PM, Dave Sharred g3...@yahoo.co.uk wrote: To be clear in Jo's initial email; are you talking about start up of DX4Win or when the program is running? If you are talking at start up; I have seen the same sort of behaviour on 2 PC's (Win XP and WIN7). IN the past (XP, older PC, earlier DX4Win) I also concluded that the driver was not installed correctly on a newly booted PC. I still see this sometimes on my new WIN 7 laptop. I will install the driver at start up, which I think will provide the answer; later today. (BTW - I am using MicroHam USBII as my rig interface) 73 Dave G3NKC --- On Wed, 15/9/10, Kostas Stamatis sv1...@otenet.gr wrote: From: Kostas Stamatis sv1...@otenet.gr Subject: Re: [Dx4win] Error messages To: REFLECTOR dx4win dx4win@mailman.qth.net Date: Wednesday, 15 September, 2010, 15:40 I also have noticed this but occasionally. I believe that usb to serial driver is not loaded so quickly because our computer are not so fast. If you wait for a while or open another program first, there will not be a problem. 73 Kostas sv1dpi - Original Message - From: Jo, YC0LOW yc0...@gmail.com To: Dx4win@mailman.qth.net Sent: Wednesday, September 15, 2010 2:19 PM Subject: [Dx4win] Error messages When keying CW, I sometimes had consecutive two error mesages as follows: a. Could not open COM8 for keying:ie_Open - device already open. and then: b. Radio time out. Radio interface has been disabled To restore it, I must re-open the software in my notebook. I am using ver 8.04 with Windows 7 as the OS. I used a homemade interface made of two pcs of transistors 2N and two resistors 1.2k to my Icom 746Pro with cable USB 2.0 to serial that has FTDI chipset. Could someone help me to explain what would be the cause, please? Tnx es 73 de Jo, YC0LOW __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] DX4WIN with IC746Pro
Hi all, For CW use, I'd like to connect, via an interface, my DX4WIN ver 702.15 in Toshiba notebook to straight CW key jack in the rear of Icom IC-746 Pro. With simple interface circuit as written in its Help file, my DX4WIN worked okay in these years with my vintage FT1000MP for CW. But, with the Icom, it only produces 'dah'. My notebook is running XP and has only one parallel/LPT port to use. Please help. TIA es 73 de Jo, YC0LOW From [EMAIL PROTECTED] Wed Feb 21 15:08:46 2007 From: [EMAIL PROTECTED] (Ken Kopp) Date: Sat Feb 24 04:52:20 2007 Subject: [Dx4win] DXCC / LoTW credits References: [EMAIL PROTECTED] Message-ID: [EMAIL PROTECTED] FWIW ... I'm a long-time friend of N7NG, the now-departed (:-(( Oracle of the LoTW program. He tells me that the operation is headed by Dave Patton, and customer service is being handled by Kathy Anderson ... 860-594-0206. Now, to pop the lid off the proverbial can of worms Has anyone managed to disguise/legitimatize e.QSL's and use them for credit via LoTW by importing them into their logging program and then into a LoTW submission? I --DO NOT-- approve of this or would never consider doing so, but others may view it differently. I know the League has gone to considerable length to avoid accepting e.QSL's, but ... sadly... I don't see any way of preventing it from happening, once the QSO/QSO's are imported into your log, regardless of which program you're using. 73! Ken Kopp - K0PP [EMAIL PROTECTED] or [EMAIL PROTECTED]
[Dx4win] Cable interface
I also need the answer. Could someone be kind enough to translate this into English, please? Tnx es 73 de Jo, YC0LOW - Original Message - From: Isidro Acosta Hern?ndez [EMAIL PROTECTED] To: [EMAIL PROTECTED]; dx4win@mailman.qth.net Sent: Tuesday, December 26, 2006 5:27 PM Subject: Re: [Dx4win] Cable interface Hola Josep. Felices fiestas... Depende de lo que quieras hacer. Para controlar el radio desde el DX4Win necesitas un cable CAT adecuado para el radio. Para operar en modos digitales necesitas un cable apantallado entre la salida LINE OUT del ordenador y la entrada de audio de TX del radio (preferiblemente no la entrada de micr?fono, sino alguna para mayor nivel de se?al), y otro cable similar entre la salida de audio de RX del radio y la entrada de audio del ordenador (LINE IN). Posiblemente necesites alg?n circuito de adaptaci?n entre ambos equipos, aunque yo uso los cables sin m?s y funcionan bien. Saludos 73 de Isidro, EA8NQ E-mail: [EMAIL PROTECTED]
[Dx4win] Printing Operator's Name
Pse help. How do I automatically print operator's name --if any-- which I've written in Notes for this Call, onto the QSL label? Tnx es 73 de Jo, YC0LOW From [EMAIL PROTECTED] Sun Apr 16 01:01:43 2006 From: [EMAIL PROTECTED] (Scott Neader KA9FOX) Date: Sun Apr 16 01:02:57 2006 Subject: [Dx4win] Import Filter question Message-ID: [EMAIL PROTECTED] I want to tweak one of the provided Import Filters. Namely, I want to use the N6TR2 filter, which imports native TR-Log files without RST, but I want to include the State field. First, I can use the built-in N6TR2 import facility -- works great, it just doesn't import the State. If I go to File Import, choose N6TR2, use the copy feature, then try to use this copied filter without even changing anything... it errors out with Error executing N6TR2 To restate, if I take a working filter, and simply copy it, the copy can't import. What am I doing wrong? - Scott KA9FOX
[Dx4win] Printing Operator's Name
Many thanks, Hamad. That's what I want. 73 de Jo, YC0LOW - Original Message - From: 9K2HN [EMAIL PROTECTED] To: Jo,YC0LOW [EMAIL PROTECTED]; dx4win Reflector dx4win@mailman.qth.net Sent: Sunday, April 16, 2006 12:50 PM Subject: RE: [Dx4win] Printing Operator's Name Hi Jo, I found this in the help file of dx4win:- (two ampersands) will be replaced by the first word of the 'Notes for the callsign'. Using this macro, you can print the name of the operator in the greeting line. is this what you want? de 9k2hn hamad Original Message Subject: [Dx4win] Printing Operator's Name From: Jo, YC0LOW [EMAIL PROTECTED] Date: Sun, April 16, 2006 6:23 am To: Dx4win@mailman.qth.net Pse help. How do I automatically print operator's name --if any-- which I've written in Notes for this Call, onto the QSL label? Tnx es 73 de Jo, YC0LOW ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
Fw: [Dx4win] DX4WIN.CTY Release #28 Available
Jim, sorry, couldn't get there. Your given address linked me to the website of: NRMCA Legal Resource Center. Tnx es 73 de Jo, YC0LOW - Original Message - From: Jim Reisert AD1C [EMAIL PROTECTED] DX4WIN.CTY Release #28 is ready for download: http://dx4win.ad1c.us/#Country
[Dx4win] Computer connection to FT-1000MP
I apologise if this question already discussed here before. I just joined the maillist. I am running v6.03 and would like to do CW keying with it. All soldering for serial port (DB25) CW key interface have been done. But, there seemed no 'dah' exept 'dit' only. Please advise me what setting (in the PREFERENCE) should be done. Or, what MENU in the MP should be changed? Tnx es 73 de Jo, YC0LOW From [EMAIL PROTECTED] Tue Mar 21 18:32:37 2006 From: [EMAIL PROTECTED] (Scott and Lisa Augsburger) Date: Tue Mar 21 18:36:32 2006 Subject: Fw: [Dx4win] DX4WIN 7 and M2 RC2800PX Message-ID: [EMAIL PROTECTED] Hey Marty, I have this combo and it works great. I am very very happy with this feature. Except when having a off-set for another antenna and that's a whole new story. A) Make sure you are on EXPERT user level in the main Preferences setup Parameters screen. My comm port speed is set to 9600, 8,None,1 Xon / Xoff. My computer is set to comm port 3 on a old Gateway 2000 Win 95 486-DX 66 mhz machine. I am running 2 comm ports from the computer and a serial card with 2 comports on it. 4 total comm ports with DB-9 Radio Shack serial cables. Comm port check: 1) open control panel 2) double click system 3) system properties click the device tab 4) drop down the comm port string 5) double click the comport you want it to run on 6) click on the port setting tab check to make sure it is running at the above settings 7) click the resources tab 8) check out the i/o range 03E8 - 03EF, IRQ 09 I have my automatic settings checked. 9) Re-boot the computer DX4Win set up: 1) Open preferences 2) go to the Control tab 3) Rotor Control drop the box down and select Orion M2 4) Comm Port drop the box down and select the comm port you want it to run on. (com 3) 5) Message Handshake make sure it isThunderform. 6) File Write INI file 7) Save changes and exit. 8) A re-boot of the computer may help after doing this. I hope this helps you out Marty. This is what works for me. Let me know. I can help on the phone too if needed. Scott Augsburger WR0U