Re: [Dx4win] Dx4Win spot window

2020-11-27 Thread N4QS, Dave Perry 
Ed,

Just go to Preferences, File, Packet1 tab and on the lower left is a box
that reads: Spots to Ignore.  "None" should be displayed in the box below.
Click in the box displaying None and an arrow will appear.  Click on the
arrow and three selections will appear:  Ignore, Gray spots or Gray and
Black.  Click on Gray and Black, then go up and click on File and then Save
Changes and Exit.  This will eliminate all spots that you have previously
worked and confirmed.

73,

Dave, N4QS

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of Ed Hughes
Sent: Friday, November 27, 2020 8:48 AM
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] Dx4Win spot window

How to populate the spot window with only countries that have not been
previously worked on the band/mode being spotted. Presently, I want & get
both NEW & NOT CONFIRMED spots FB, but my friend wants only NEW spots and I
cannot make that happen. No matter what I try, he still gets spots in the
spot window for countries he has worked before. BTW, I have the box
unchecked that says "alert worked before countries".

For example, 7Q7RU is spotted on 10 20 & 160 FT8 and my friend has worked
Malawi B4 on both 10 & 20 FT8, but not 160, so he would want to see the 160
spot in the spot window, but not the 10 & 20 ones.

Ed
KG4W

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] LoTW

2020-04-26 Thread N4QS, Dave Perry 
Sorry, I meant "How are you uploading to LoTW?

Dave

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of N4QS, Dave Perry
Sent: Sunday, April 26, 2020 9:12 AM
To: f6...@hotmail.com; 'DX4WIN Refelector' 
Subject: Re: [Dx4win] LoTW

Paul,

I have not had any problems uploading to LOTW and I typically upload two or
three times per week.  Works great.  How are you uploading to TQSL?

Dave, N4QS  

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of Paul F6EXV
Sent: Sunday, April 26, 2020 9:04 AM
To: DX4WIN Refelector 
Subject: [Dx4win] LoTW

Hi all
Anybody knows what the problem is with LoTW ?
It gets stuck very often, and no log at all is uploaded for hours. This has
been going on for weeks, if not months.
Are they planning to solve the problem ?

73
Paul F6EXV
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] LoTW

2020-04-26 Thread N4QS, Dave Perry 
Paul,

I have not had any problems uploading to LOTW and I typically upload two or
three times per week.  Works great.  How are you uploading to TQSL?

Dave, N4QS  

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of Paul F6EXV
Sent: Sunday, April 26, 2020 9:04 AM
To: DX4WIN Refelector 
Subject: [Dx4win] LoTW

Hi all
Anybody knows what the problem is with LoTW ?
It gets stuck very often, and no log at all is uploaded for hours. This has
been going on for weeks, if not months.
Are they planning to solve the problem ?

73
Paul F6EXV
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Fwd: WSJT to DX4WIN

2019-10-15 Thread N4QS, Dave Perry 
Hi Ray,

 

Glad to hear that the first import worked for you.  In the future when you add 
more QSOs in WSJT-X, you just import the entire logfile the same way into 
DX4WIN.  As mentioned below, the default selection when handling dupes is that 
any duplicated QSOs from prior imports will be ignored.  So you can keep 
importing the entire log file, and DX4WIN will ignore the prior QSOs and only 
add the new QSOs.  You do not have to apply a date filter.  Keep importing the 
entire logfile from WSJT-X.  Just make sure when you get to the window that 
asks how to handle dupes, you just accept the default which is “the prior 
duplicate QSO will be ignored.”  This is a very slick feature.

 

But we still need the UDP broadcast support so that each new QSO is 
automatically imported into DX4WIN.  Then we will not have to repeat this 
manual import process over and over….

 

73,

 

Dave, N4QS

 

From: Raymundo Rodriguez  
Sent: Tuesday, October 15, 2019 7:10 PM
To: n...@vci.net
Cc: dx4win list 
Subject: Re: [Dx4win] Fwd: WSJT to DX4WIN

 


Hello dave, just to tell you that I thank you very much for your advice on 
WSJTX and tell you that I already managed to do it, although there were only 
225 QSOs, now I need to know how you separate in the WSJTX log what you already 
passed to DX4WIN with the new thing you have to update.  Is the .ADI FILE 
deleted from the WSJTX?  Or is there a better way to do it. 

 

 Regards 

 

Ray / YS1RR

 

Raymundo Rodríguez - YS1RR 

Ingeniero Industrial, mba

 

Enviado desde mi iPad Air 2





El oct. 15, 2019, a la(s) 1:34 p. m., n...@vci.net   
escribió:

Hello Raymundo,

Unfortunately, there is not an easy way to import your logged QSOs from WSJT-X 
into DX4WIN.  We have asked Paul to consider adding UDP broadcast support to 
DX4WIN, so that once a QSO is logged within WSJT-X it would also automatically 
be logged in DX4WIN.  But Paul has not responded to this request -- even though 
most other logging programs already support UDP.

So now all you can do is manually import the logfile from WSJT-X into DX4WIN.  
This is not as easy as it sounds because the WSJT-X logfile is hidden in an 
obscure folder within Windows.  I have shortened the search process by mapping 
a drive in Windows to the folder within WSJT-X so that I can find the file 
faster.  But it is still not ideal.  We need UDP support.

To manually import the log file from WSJT-X, go to File in DX4WIN, then 
Import/Export, make sure ADIF is the file type selected, in the smaller window 
select File again, Import and then go find the logfile for WSJT-X.  Select the 
logfile and either double click or click on Open.  You will see a new window 
for "Options for duplicate QSOs", and make sure "that Imported QSO is ignored" 
is the one appearing in the drop down menu.  You want DX4WIN to ignore all 
duplicates as it imports the log from WSJT-X.  Click OK and you are done.

I have over 6,500 FT8 QSOs and 1,300 FT4 QSOs in my log and they all have been 
imported that way.  The manual import of the logfile is very time consuming and 
laborious, and can be a real problem when you are in the middle of a big 
opening on 6 meters into EU.  DX4WIN is an excellent logging problem except for 
this one glaring weakness.

Now all you can do is manually import the WSJT-X logfile over and over and 
over...

I hope this helps.

73,

Dave, N4QS



-Original Message-
From: dx4win-boun...@mailman.qth.net   
mailto:dx4win-boun...@mailman.qth.net> > On 
Behalf Of Raymundo Rodriguez
Sent: Tuesday, October 15, 2019 2:08 PM
To: dx4win list mailto:dx4win@mailman.qth.net> >
Subject: [Dx4win] Fwd: WSJT to DX4WIN

Dear friends, I have my DX4WIN updated and I am starting to operate FT8 with 
Joe Taylor's WSJT software but I need to incorporate my WSJT log contacts to my 
permanent DX4WIN Log so I would appreciate if possible provide me with the 
instructions I must follow to achieve  Incorporate them, I will be highly 
grateful for your support in completing this task.  Sincerely Ray / YS1RR

Raymundo Rodríguez - YS1RR 
Ingeniero Industrial, mba

Enviado desde mi iPad Air 2

Inicio del mensaje reenviado:




De: Raymundo Rodriguez mailto:rrd1...@gmail.com> >

Fecha: 15 de octubre de 2019, 1:05:32 p. m. CST

Para: dx4win list mailto:dx4win@mailman.qth.net> >

Asunto: WSJT to DX4WIN

 



 Dear friends, I have my DX4WIN updated and I am starting to operate FT8 with 
Joe Taylor's WSJT software but I need to incorporate my WSJT log contacts to my 
permanent DX4WIN Log so I would appreciate if possible provide me with the 
instructions I must follow to achieve  Incorporate them, I will be highly 
grateful for your support in completing this task.  

 

Sincerely 

 

Ray / YS1RR

 

Raymundo Rodríguez - YS1RR 

Ingeniero Industrial, mba

 

Enviado desde mi iPad Air 2

__
DX4WIN mailing list
Home: http://mailman.qth.n

Re: [Dx4win] New computer, having issues

2019-04-10 Thread N4QS, Dave Perry 
Mark,

A couple of things to check:

1.  In DX4WIN, preferences, packet2, make sure you have typed localhost:7300
and checked the enable button.
2.   In VE7CC, Configuration, Ports/Logging Programs, in the middle section,
make sure that you have checked the enable button for local host and that
you have selected Use Port 7300.

You might have to restart both programs.

73,

Dave, N4QS


-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of Mark Lunday
Sent: Wednesday, April 10, 2019 2:58 PM
To: DX4WIN Reflector 
Subject: [Dx4win] New computer, having issues

I purchased a new PC last evening.

Everything appears to be working properly on the new PC, but I can't get the
DX4WIN to talk to the VE7CC cluster software.

I copied the config files over to the new PC, I installed VE7CC software.

In the packet window of DX4WIN, I select LOCAL HOST 7300 for connection, but
nothing happens.  No errors, nada.

When I click on SH/DX in the packet window, it says "no connection active"

I can connect to other named packet sources in DX4WIN on the new computer,
just not LOCALHOST/7300.

Am I missing a setting in DX4WIN or VE7CC?


Mark Lunday, WD4ELG
Greensboro, NC  FM06be
wd4...@arrl.net
http://wd4elg.blogspot.com
SKCC #16439  FISTS #17972  QRP ARCI #16497



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Prosistel

2019-01-28 Thread N4QS, Dave Perry 
Hi Paul,

Go to File, Parameters, Control tab.  Click on the right side of the Type
box to open list of rotators.  Two versions of Prosistel should be listed.

73,

Dave, N4QS

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of Paul GRANGER
Sent: Monday, January 28, 2019 1:30 AM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Prosistel

Hi all
I had to completely reinstall DX4Win, and can no longer find where and how
to configure DX4win so it communicates with my rotator, a Pro-sis-tel
PST71D.
I am using DX4Win version 9.0.3.
Anyone can help please ?

Thanks + 73
Paul F6EXV
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Need help with rotor control

2019-01-05 Thread N4QS, Dave Perry 
Use the short cut keys.  When you have a call in the callsign box in the QSO
window, you can just press F11 and DX4WIN will turn your rotator to the
correct heading.  For long path, just press Control F11.

Dave, N4QS

-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of w3ab
Sent: Saturday, January 05, 2019 4:58 PM
To: Tim moore 
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] Need help with rotor control

Tim,

I've now got it "working". Is the rotator supposed to follow the spot when I
double click it like the radio does? If I drop down the rotator menu and
click on short, or long, path it rotates.

---
73 de W3AB/GEO

On 2019-01-05 17:37, Tim moore wrote:
> What are your settings?
> 
> Tim Moore/K4TK
> 
> On Sat, Jan 5, 2019, 2:17 PM w3ab  
>> I finally got around to installing a MDS RC-1Y. I am unable to get 
>> DX4WIN or any other program to talk to it. Tried USB, which I 
>> dislike, and a USB-serial dongle which I dislike almost as much. No 
>> joy.
>> 
>> I've set up the preferences but the rotor drop-down is greyed out.
>> 
>> I really like RS-232 since it is easy to troubleshoot.
>> 
>> Any ideas?
>> 
>> ---
>> 73 de W3AB/GEO
>> __
>> DX4WIN mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:DX4WIN@mailman.qth.net
>> Message delivered to k...@arrl.net
>> 
>> This list hosted by: http://www.qsl.net Please help support this 
>> email list: http://www.qsl.net/donate.html
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to n...@vci.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Expert mode and DX Doubler

2018-12-17 Thread N4QS, Dave Perry 
Alan, I did have to install the lptdriver as you suggested, but I also had
to reset the LPT port address in N1MM+ to match the address for the new PCIe
card.   The DXD works fine now in N1MM, but I can't see a way to change the
address in DX4WIN.  I have emailed Paul.  Thanks for the assist.  73, Dave -
N4QS


-Original Message-
From: Alan Walters  
Sent: Sunday, December 16, 2018 3:18 PM
To: n...@vci.net; dx4win@mailman.qth.net
Subject: RE: [Dx4win] Expert mode and DX Doubler

Dave, I too am using my DX Doubler with 9.0.4 with Win7.  I wonder if you
have installed the lptdriver?  Assuming you installed DX4W directly in C:
drive, you will find this at C:/dx4w/drivers/lptdriver.

Al, K5NOF

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of n...@vci.net
Sent: Sunday, December 16, 2018 12:51 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Expert mode and DX Doubler

I am trying to reinstall my legacy DX Doubler SO2R box with DX4WIN ver
9.0.4.  It used to work great under version 8.5.  When I go to Preferences,
Control tab, I cannot change the Type or LPT1 port under Band Decoder.  With
version 9.04, the type is grayed out as None under Band decoder.  As I
recall, you used to have to go into the Personal tab to turn on expert mode
to change this, but that is no longer available.  Is Top Ten Devices using a
LPT port still supported in Version 9?  And can anyone tell me what happened
to Expert Mode?  Thanks,  Dave, N4QS

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to abwl...@aol.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Import of ADIF "Comment" field - answered

2018-07-02 Thread N4QS, Dave Perry 
Paul,
This used to bother me.  I solved the problem by unchecking the "db reports
to comments" box under the Reporting tab in Settings within WSJT-X.  By
doing that, nothing is saved to the comments field in the ADIF file and thus
nothing gets imported into the Call Sign Notes field in DX4WIN.

73,
Dave, N4QS



-Original Message-
From: dx4win-boun...@mailman.qth.net  On
Behalf Of Paul Ferguson
Sent: Monday, July 02, 2018 8:56 PM
To: Dx4win 
Subject: Re: [Dx4win] Import of ADIF "Comment" field - answered

Len (K1NU) noted that when a WSJT log is imported into DX4WIN, DX4WIN puts
the contents of the  field of the WSJT log into the DX4WIN
"Callsign Notes" field. 

What is in the WSJT  field is usually the mode and signal reports
such as "FT8  Sent: +01  Rcvd: +00". This is clearly QSO-related and not
Callsign-related information.  

When I look at an ADIF specification, it says the  field is a
Comment field for the QSO (not for the Callsign).

I do not know why WSJT decided to put the mode and signal reports in the
 field because other fields already contain the mode and signal
reports. DX4win imports these mode and signal report fields into the proper
parts of the DX4WIN log.

The problem with importing the  field into the DX4WIN Callsign
Notes is when you work a station multiple times. With each repeat QSO,
QSO-related info is appended to what is already in Callsign Notes. With many
QSOs, Callsign Notes gets pretty mucked-up with info that does not belong
there.

I would like to see DX4WIN make a change so that WSJT  field is
put into DX4WIN Callsign Notes. 

73,
Paul
K5ESW


> Never mind... I found my own answer.  I grabbed the ADIF spec and 
> started playing.
> 
> Turns out the  field will go to QSO Notes.
> 
> 73 Len
> 
> On 2018-06-23 07:45, Leonard Kay wrote:
> > When you import an ADIF file (e.g., from WSJT) into D4W, whatever
> is
> > in the "" field gets imported into the D4W "Callsign 
> > notes" field.  This seems wrong to me; in the WSJT example, this
> field
> > contains the signal reports.  A better match seems like "QSO
> Notes".
> > 
> > So, is there an ADIF field that D4W will match to "QSO Notes" on 
> > import? If so, I could do a text replace before I import the ADIF
> file
> > to D4W.
> > 
> > Len K1NU
> > __
> > DX4WIN mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/dx4win
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:DX4WIN@mailman.qth.net
> > Message delivered to k...@k1nu.com
> > 
> > This list hosted by: http://www.qsl.net Please help support this 
> > email list:
> http://www.qsl.net/donate.html
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
> Message delivered to p...@paulferguson.us
> 
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to n...@vci.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Lost the spot window

2018-06-12 Thread N4QS, Dave Perry 
Fixed!  It took a complete reinstall of 9.03 and then an update to 9.04.  I 
then loaded the config file from the previous install and when the windows 
loaded -- there was the DX Spot window!

That only took about five hours to figure out!  Despite battery backup, a long 
power failure yesterday seemed to mess up the computer.  DX4 was not running, 
but when I tried to start it last night everything blew up.

Seems to be all okay now.  Back to working DX.

73,

Dave, N4QS



-Original Message-
From: dx4win-boun...@mailman.qth.net  On Behalf 
Of N4QS, Dave Perry
Sent: Tuesday, June 12, 2018 3:27 PM
To: 'Paul van der Eijk' 
Cc: 'DX4WIN Reflector' 
Subject: Re: [Dx4win] Lost the spot window

Hi Paul,

 

I just tried closing the log.  Only the radio frequency control window is left 
open – and the top banner.  And the packet window is minimized.

 

Nothing else is visible.  I am using version 9.0.4.1176 and dual monitors.  
When the log is open all other windows are displayed in the correct positions 
across both monitors.

 

Dave

 

From: Paul van der Eijk 
Sent: Tuesday, June 12, 2018 3:17 PM
To: N4QS, Dave Perry 
Cc: DX4WIN Reflector 
Subject: Re: [Dx4win] Lost the spot window

 

Dave,

 

When you close your log there will be fewer windows open; it may have been 
covered by another window?

 

--Paul

 

On Tue, Jun 12, 2018 at 3:54 PM, N4QS, Dave Perry mailto:n...@vci.net> > wrote:

I had a major corruption on my main pc.  Have restored config settings but 
cannot get the Spot window to display.  I tried resetting W-SPOT in the config 
file to top=0 and left=0, but still cannot see/find spot window.



Packet window at start up works fine and it logs into localhost:7300 and 
displays first 25 spots.  But no Spot window.  And no bandmap.  I need to see 
the spot window to bring up bandmap.



Can anyone point me in the right direction?



Thank you.



Dave, N4QS







__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net <mailto:DX4WIN@mailman.qth.net> Message 
delivered to pvandere...@gmail.com <mailto:pvandere...@gmail.com> 

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html





 

-- 

~
DX4WIN logging software
Paul van der Eijk, KK4HD
BrookHill Data Systems LLC
http://www.dx4win.com

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to n...@vci.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Lost the spot window

2018-06-12 Thread N4QS, Dave Perry 
Hi Paul,

 

I just tried closing the log.  Only the radio frequency control window is left 
open – and the top banner.  And the packet window is minimized.

 

Nothing else is visible.  I am using version 9.0.4.1176 and dual monitors.  
When the log is open all other windows are displayed in the correct positions 
across both monitors.

 

Dave

 

From: Paul van der Eijk  
Sent: Tuesday, June 12, 2018 3:17 PM
To: N4QS, Dave Perry 
Cc: DX4WIN Reflector 
Subject: Re: [Dx4win] Lost the spot window

 

Dave,

 

When you close your log there will be fewer windows open; it may have been 
covered by another window?

 

--Paul

 

On Tue, Jun 12, 2018 at 3:54 PM, N4QS, Dave Perry mailto:n...@vci.net> > wrote:

I had a major corruption on my main pc.  Have restored config settings but
cannot get the Spot window to display.  I tried resetting W-SPOT in the
config file to top=0 and left=0, but still cannot see/find spot window.



Packet window at start up works fine and it logs into localhost:7300 and
displays first 25 spots.  But no Spot window.  And no bandmap.  I need to
see the spot window to bring up bandmap.



Can anyone point me in the right direction?



Thank you.



Dave, N4QS







__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net <mailto:DX4WIN@mailman.qth.net> 
Message delivered to pvandere...@gmail.com <mailto:pvandere...@gmail.com> 

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html





 

-- 

~
DX4WIN logging software
Paul van der Eijk, KK4HD
BrookHill Data Systems LLC
http://www.dx4win.com

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Lost the spot window

2018-06-12 Thread N4QS, Dave Perry 
I had a major corruption on my main pc.  Have restored config settings but
cannot get the Spot window to display.  I tried resetting W-SPOT in the
config file to top=0 and left=0, but still cannot see/find spot window.

 

Packet window at start up works fine and it logs into localhost:7300 and
displays first 25 spots.  But no Spot window.  And no bandmap.  I need to
see the spot window to bring up bandmap.

 

Can anyone point me in the right direction?

 

Thank you.

 

Dave, N4QS

 

 

 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Printing Labels in Sequence?

2018-03-03 Thread N4QS, Dave Perry 
Eric,

Click F8, type in station call sign, hit enter
All QSOs with that station will be displayed in logbook window
Click QSLs tab, Set QSL Label flag, follow prompts
Click Print QSL labels under same QSLs tab
Select the custom label that you would like to use
Uncheck most Print options (Group Names, Method Labels, etc.)  I only use
Print Via Manager
Click on Edit and review format
Multiple QSOs should be showing in the preview
You can uncheck Commercial to free up more space for QSOs
Go back to main Print QSL labels pop up window
Click on Print, follow prompts
Labels should print

I can normally get up to 4 QSOs to print on one label.

Hope this helps.

Trying to work 3D2ER on 160M while I type this!

73,

Dave





-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Eric Rosenberg
Sent: Saturday, March 03, 2018 12:53 AM
To: DX4Win Reflector 
Subject: [Dx4win] Printing Labels in Sequence?

I can't get this to work.

I have multiple QSOs with a single station, and would like to print labels,
each with multiple QSOs in chronological order.

How do I do that?

73,
Eric W3DQ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to n...@vci.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4Win - Elecraft K3 - Remote Rig

2018-02-20 Thread N4QS, Dave Perry 
John,

In my case, I am using RemoteRig boxes at both the remote and control sites.  I 
have a Static IP at the remote site and I forward two or three ports that the 
two boxes use to communicate.  I am not sure if I prioritized the port 
connections in the routers at each end.  Will have to check.  No, I do not have 
Wifi cameras and other equipment actively engaged at either end.  No Wifi 
mouses/keyboard.  (I use Bluetooth.)  Not sure what you mean by backhaul 
distance.  The remote site is about 10 miles from my home (control site).  
Latency is normally not an issue.  I regularly operate major contests with full 
control of the remote K3 and all accessories.  Audio streaming is normally 
excellent.

Dave, N4QS

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On 
Behalf Of John pritt
Sent: Tuesday, February 20, 2018 7:39 AM
To: Kostas SV1DPI 
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] DX4Win - Elecraft K3 - Remote Rig

Interesting problem.  Are either of you using a Static or Dynamic IP?  Also, 
have you prioritized this port connection in your router?  Is there other 
router activity going on in your home like WiFi cameras, IP phones and WiFi 
mouse/keyboard and such?  What is the back haul distance between remote and ham 
equipment 

John Pritt



> On Feb 20, 2018, at 00:35, Kostas SV1DPI  wrote:
> 
> I use a Kenwood 480 with remoterig and happens to me also. I believe the 
> problem is that when dx4win looses cat control, deactivate the cat control 
> (com port). Cat control via internet looses some packets from time to time. 
> Dx4win thinks that lost the cm port and deactivate it.
> 
> I use the same setup with writelog also. When writelog looses the cat control 
> the freq freezes, writelog continues to work and after some seconds finds 
> again the radio.
> 
> Some others users complain about the same: Dx4win pop up a message every time 
> it looses the CAT control - com port. Writelog behaviour would be much better 
> to have.
> 
> ...73 de Kostas SV1DPI
>  (One of SZ1A-EP6T)
> 
> Στις 18/2/2018 3:10 πμ, ο John, K9EL έγραψε:
>> I am using a K3/0 remote over the Internet to a K3.DX4Win keeps losing
>> the connection to the K3/0 on my laptop.  Sometimes it stays connected for
>> 20 minutes, sometimes an hour.  I cannot figure out what is going on.   The
>> laptop is connected to the Remote Rig box via USB.
>> 
>>  
>> Just wondering if anyone ever had an issue with staying connected to 
>> Remote Rig boxes.
>> 
>>  
>> 73, John K9EL
>> 
>>  
>> __
>> DX4WIN mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/dx4win
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:DX4WIN@mailman.qth.net
>> Message delivered to sv1...@otenet.gr
>> 
>> This list hosted by: http://www.qsl.net Please help support this 
>> email list: http://www.qsl.net/donate.html
> 
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
> Message delivered to radiot...@nycap.rr.com
> 
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to n...@vci.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4Win - Elecraft K3 - Remote Rig

2018-02-20 Thread N4QS, Dave Perry 
John and Kostas,

I also have a K3/0 mini and I am glad to hear this problem happens to other 
users.  (No, not really!)  My case is a little different.  I never have a 
problem with DX4WIN at the control site losing connection to the K3 at the 
remote site.  Stays connected -- rock solid for hours on end.  I think I set 
the poll rate at only 2000 ms and set max tries to 3.

My problem is with N1MM+.  It loses connection quite frequently -- about once 
or twice an hour on a good day.  That will typically throw me out of run mode 
and I must right click on the band map to Reset Radios.  I figured that N1MM+ 
is somehow polling the radio differently than DX4WIN.  There is a setting to 
slow the polling 50% and 100% versus normal, but the same thing happens on all 
three settings.  N1MM+ does not have a way to increase Max Tries -- so that may 
be the problem.  I have recently sent my issue to the N1MM+ reflector with no 
response.

Another ham in our local contest club mentioned that he once had the same issue 
and his problem ended up being RF getting into the computer cables.  He cured 
it by adding toroid filters to the cables.  Since DX4WIN works fine, I am not 
sure that is the answer to my problem.  But it could be yours -- think about if 
there is any chance RF is getting into the pc.

Let me know what you find out.

73,

Dave, N4QS



-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On 
Behalf Of Kostas SV1DPI
Sent: Monday, February 19, 2018 11:35 PM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] DX4Win - Elecraft K3 - Remote Rig

I use a Kenwood 480 with remoterig and happens to me also. I believe the 
problem is that when dx4win looses cat control, deactivate the cat control (com 
port). Cat control via internet looses some packets from time to time. Dx4win 
thinks that lost the cm port and deactivate it.

I use the same setup with writelog also. When writelog looses the cat control 
the freq freezes, writelog continues to work and after some seconds finds again 
the radio.

Some others users complain about the same: Dx4win pop up a message every time 
it looses the CAT control - com port. Writelog behaviour would be much better 
to have.

...73 de Kostas SV1DPI
   (One of SZ1A-EP6T)

Στις 18/2/2018 3:10 πμ, ο John, K9EL έγραψε:
> I am using a K3/0 remote over the Internet to a K3.DX4Win keeps losing
> the connection to the K3/0 on my laptop.  Sometimes it stays connected for
> 20 minutes, sometimes an hour.  I cannot figure out what is going on.   The
> laptop is connected to the Remote Rig box via USB.
>
>   
>
> Just wondering if anyone ever had an issue with staying connected to 
> Remote Rig boxes.
>
>   
>
> 73, John K9EL
>
>   
>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
> Message delivered to sv1...@otenet.gr
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to n...@vci.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] (no subject)

2017-11-17 Thread N4QS, Dave Perry 
Hi Mike,

Right click anywhere in the Logbook window.  Click Report Editor. 
Highlight submode within Report Fields list on right and click on the <
button.  Then Save.

73,

Dave, N4QS



> Is there a way to remove the "SubMode" column from the Logbook window?
>
> Thanks
>
> Mike
> K7PI
>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
> Message delivered to n...@vci.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Maintenance release DX4WIN 902

2017-11-01 Thread N4QS, Dave Perry 
How can you tell if you installed the new program update correctly?  I thought 
I downloaded and installed all files using Check for Updates, but it is still 
showing 9.01 in the upper left corner.  Shouldn't it read 9.02?

Dave, N4QS

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On 
Behalf Of Paul van der Eijk
Sent: Wednesday, November 01, 2017 3:21 PM
To: DX4WIN Reflector 
Subject: [Dx4win] Maintenance release DX4WIN 902

Available for download as a fresh install or update using the "Check for 
update" menu option.

These are the changes:

·Removed modes from the ICOM-7300 rig file that are not native to the radio

·Problem with opening RTTY Window

·Check for a valid US state when updating from callbook

·Other windows did not update when modifying callsign

·Conversion of submission flags for older logs (versions 7 and earlier)

·Awards that have a picture mask defined (like 1010) did not display data field

·A double-click in a county report did not display correct QSO

·A few cosmetic changes

--
~
DX4WIN logging software
Paul van der Eijk, KK4HD
BrookHill Data Systems LLC
http://www.dx4win.com
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to n...@vci.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] The effect of the logbook set-up when updating the program.

2017-10-21 Thread N4QS, Dave Perry 
Ernie,

When you go to the update area to do an update, be sure to uncheck Layouts
for Logbook Window.  Downloading this will overwrite what you have set up.

Dave, N4QS

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Ernie Walls
Sent: Saturday, October 21, 2017 11:37 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] The effect of the logbook set-up when updating the
program.

I set-up my logbook just as I wanted it, and as it was in v8.05.

Then, I went to the update area and updated a couple of files (as the
program suggested), and when I returned to the program I immediately noticed
that my logbook set-up had returned to the default setting!

I set-up the logbook again, updated again, and the same thing happened! Yes,
saved everything each time.

I must be doing something wrong - surely?

Can anyone advise.

Ernie Walls VK3FM
vk...@wallsy.com.au
Mobile 0418 301 483

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to n...@vci.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] JT ALERTER

2017-08-14 Thread N4QS, Dave Perry 
Hi Mike,

Yes, that would be a nice enhancement!  Same goes for Fldigi for the other
digital modes.

73,

Dave, N4QS

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Mike
Sent: Monday, August 14, 2017 6:08 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] JT ALERTER

I have not seen anyone mention it but hopefully any upgraded DX4 will work
with JT Alerter.  Most all of the logging programs will work with JT Alerter
except for DX4win.  73 Mike K4PI
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] JT65 in report

2017-08-11 Thread N4QS, Dave Perry 
Yes, JT65 does get imported into the mode field.  I was thinking about JT9
and FT8.  Hopefully those new modes are coming with the new version.  And
Mike is right--F8 will not work, but creating a group should do it.

73,
Dave, N4QS

-Original Message-
From: Mike Cizek W0VTT [mailto:mgci...@gmail.com] 
Sent: Friday, August 11, 2017 4:35 PM
To: 'Robert Garceau' ; 'N4QS, Dave Perry' ;
dx4win@mailman.qth.net
Subject: RE: [Dx4win] JT65 in report

Hello Bob,

The program only does phone, cw, and digital because that is what the League
counts for DXCC; they don't care which digital mode you use for your digital
DXCC.  The reports generator looks at the entire log, or a selection, but
will not recognize the F8 filter.

There are two ways to get the report info you want.  One (I think the
easiest) is to use the method I described in my last email.  The other would
be to assign all of your JT65 QSOs to a group, make a selection (different
than a filter) of that group number, and do your report on the selection.

73,
Mike W0VTT

-Original Message-
From: Robert Garceau [mailto:rgarc...@snet.net]
Sent: Friday, 11 August, 2017 16:25
To: 'Mike Cizek W0VTT'; 'N4QS, Dave Perry'; dx4win@mailman.qth.net
Subject: RE: [Dx4win] JT65 in report

I have version 8.02 and it does accept JT65 in the mode column of all the
q's that import from WSJT-X. And uploading to LOTW is not a problem. What I
tried to do was go to reports>report generator and do a search by mode. JT65
doesn't show, only PHONE, CW and DIG. 

Bob, W1EQ

-Original Message-
From: Mike Cizek W0VTT [mailto:mgci...@gmail.com]
Sent: Friday, August 11, 2017 5:16 PM
To: 'N4QS, Dave Perry'; 'Robert Garceau'; dx4win@mailman.qth.net
Subject: RE: [Dx4win] JT65 in report

The F8 filter will not work this way; the report will still look at all of
the QSOs in your log.  There are a couple of ways to do it, but I think the
easiest would be to filter for JT65, export the filtered QSOs to another log
file, and do your report(s) from that file.  None of the ARRL awards care
about signal reports, so you don't need them for a submission.

Paul has announced that he is working on a new version and it is in beta
test.  I'm sure he is reading the reflector and will have this import thing
corrected in the new version.

FWIW, I find it easier to log the QSOs directly in DX4WIN, rather than
importing my WSJT-X log.

73,
Mike W0VTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of N4QS, Dave Perry
Sent: Friday, 11 August, 2017 15:28
To: 'Robert Garceau'; dx4win@mailman.qth.net
Subject: Re: [Dx4win] JT65 in report

Robert,

If you import the QSOs from WSJT-X into DX4WIN, JT65 and the received and
sent signal reports should show up in the Notes for this Call box--which is
an incorrect mapping.  You then must manually cut and paste to move the JT65
comments from the Notes for this Call box into the Notes for this QSO box.
If you are entering the QSOs manually, you can enter JT65 directly into the
Notes for the QSO box.  Once you have JT65 entered into the Notes for this
QSO box for all of your Jt65 QSOs, you can do a search by pressing F8 and
then entering JT65 in the Notes box -- when you hit enter all of your JT65
Qs should be displayed.  With this filter displayed, you should be able to
then run reports as you want.

Rumor has it that Paul may be working on a new version that will fix this
problem.  Can any beta testers speak to this?

73,

Dave, N4QS

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Robert Garceau
Sent: Friday, August 11, 2017 3:14 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] JT65 in report

How do I get the JT65 mode into the reports?

I have logged over 100 Q's and the they do show up at JT65 in the mode
column of the logbook.

 

I'm trying to determine which DX countries I have worked..

 

Bob, W1EQ

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] JT65 in report

2017-08-11 Thread N4QS, Dave Perry 
Robert,

If you import the QSOs from WSJT-X into DX4WIN, JT65 and the received and
sent signal reports should show up in the Notes for this Call box--which is
an incorrect mapping.  You then must manually cut and paste to move the JT65
comments from the Notes for this Call box into the Notes for this QSO box.
If you are entering the QSOs manually, you can enter JT65 directly into the
Notes for the QSO box.  Once you have JT65 entered into the Notes for this
QSO box for all of your Jt65 QSOs, you can do a search by pressing F8 and
then entering JT65 in the Notes box -- when you hit enter all of your JT65
Qs should be displayed.  With this filter displayed, you should be able to
then run reports as you want.

Rumor has it that Paul may be working on a new version that will fix this
problem.  Can any beta testers speak to this?

73,

Dave, N4QS

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Robert Garceau
Sent: Friday, August 11, 2017 3:14 PM
To: dx4win@mailman.qth.net
Subject: [Dx4win] JT65 in report

How do I get the JT65 mode into the reports?

I have logged over 100 Q's and the they do show up at JT65 in the mode
column of the logbook.

 

I'm trying to determine which DX countries I have worked..

 

Bob, W1EQ

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Lost Settings

2016-12-10 Thread N4QS, Dave Perry 
Ron,

Tough luck -- it's happened to me before.  If you have previously saved the
.ini file you can reload it via the merge ini function.

Go here for more info:
http://www.dx4win.com/HelpVer804/index.html?mwfpwriteini.htm

73,

Dave, N4QS

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of WB3AAL
Sent: Saturday, December 10, 2016 7:08 AM
To: dx4win@mailman.qth.net
Subject: [Dx4win] Lost Settings

Hello,

 I have been using this program for a very long time and this is a first for
myself.

I am using Version 8.05 on a Windows XP Pro machine that is not on-line for
the Internet.

 Today I fired up the machine and an error code came up when I started
DX4WIN program. I think it was a cfg file. Not 100% sure due to it came up
and went away quick. My saved log did not open. I shut down the program and
rebooted my computer. 

 When I started up the DX4WIN program I had to open my saved file. Good news
was I saw the last QSO I made yesterday. Bad news is I had to go into the
Preferences to reset all my settings.

 Any idea what happened?

 I do have the entire program saved on a flash stick. Is there a way I can
get my old settings back from the saved program?

73
Ron Polityka
WB3AAL


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Importing JT65

2016-08-23 Thread N4QS, Dave Perry 
John,

Your suggestion solved the problem.  I downloaded and ran ADIF Master.
Opened wsjtx_log.adi and left clicked on the header "Comment".  That brought
up a pull down list of header names.  I selected Notes and the header was
changed to Notes.  I saved the file and then imported it into DX4WIN.  The
comment information now went into the Notes for this QSO field instead of
the Notes for this Call field.  This is better than having to change 195
QSOs by hand.

Now if we could just solve the JT9 issue.  Hi, hi

Thanks to Jim, Lee and John for the assistance.

73,

Dave, N4QS  


-Original Message-
From: John [mailto:gi...@xtra.co.nz] 
Sent: Tuesday, August 23, 2016 8:50 PM
To: 'N4QS, Dave Perry'
Subject: RE: [Dx4win] Importing JT65

Hi Dave, try using ADIF Master as your editor.

Cheers
John ZL1ALZ

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of N4QS, Dave
Perry
Sent: Wednesday, 24 August 2016 1:36 p.m.
To: 'Ernie Walls' 
Cc: DX4WIN Reflector 
Subject: Re: [Dx4win] Importing JT65

Ernie, Jim and Lee,

All three of you suggested that I open the wsjtx.adi file with a text editor
and then do a find/replace to change the comments tag to notes.  That works
fine.  But the modified file gets saved as a text file and not an adi file.
How do I save the modified file with an adi extention?

Thanks.

73,

Dave, N4QS

-Original Message-
From: Ernie Walls [mailto:vk...@wallsy.com.au]
Sent: Tuesday, August 23, 2016 8:00 PM
To: 'N4QS, Dave Perry'
Subject: RE: [Dx4win] Importing JT65

Dave, I have been seeking a resolution to this for five years, and no one
can help. So if you do come across a fix, be sure to post it for me.

It is just another of my great disappointments with DX4Win as a modern
logger. It was great in 2005, but is far behind now-and the author very
obviously has jumped ship.

What I do, in a long winded away of 'fixing' this issue, is to do a
'Edit/Replace/(Find what) Comment/ (Replace with) Notes/Replace All' on
every ADI file I have to import into DX4Win and that does the trick. But it
is NOT state of the art.

Good DXing - stay safe and healthy.

73.

Ernie Walls VK3FM
vk...@wallsy.com.au
Mobile 0418 301 483

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of N4QS, Dave
Perry
Sent: Wednesday, 24 August 2016 7:18 AM
To: DX4WIN Reflector 
Subject: [Dx4win] Importing JT65

I am trying to import the wsjtx.adi file into DX4WIN.  However, the comments
field from WSJT-X (which contains the signal reports in db format) is being
put into the Notes for the Call field in DX4WIN instead of the Notes for the
QSO field.  I have even tried using Jim's ADIF to DX4WIN utility, but the
comments always go into the Notes for the Call field.

 

Does anyone know how I can change the mapping for the import so that the
Comments from the ADIF file go into the Notes for this QSO field?

 

Any help would be appreciated.

 

Thank you.

 

Dave, N4QS

 

 

 

BTW, I sure wish DX4WIN supported JT9 as a mode.  That is another whole can
of worms to try to work around.  It would also be nice if DX4WIN interfaced
with JTAlert so that QSOs made in WSJT-X were automatically entered into
DX4WIN.  Activity for weak signal modes is booming these days.

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Importing JT65

2016-08-23 Thread N4QS, Dave Perry 
Ernie, Jim and Lee,

All three of you suggested that I open the wsjtx.adi file with a text editor
and then do a find/replace to change the comments tag to notes.  That works
fine.  But the modified file gets saved as a text file and not an adi file.
How do I save the modified file with an adi extention?

Thanks.

73,

Dave, N4QS

-Original Message-
From: Ernie Walls [mailto:vk...@wallsy.com.au] 
Sent: Tuesday, August 23, 2016 8:00 PM
To: 'N4QS, Dave Perry'
Subject: RE: [Dx4win] Importing JT65

Dave, I have been seeking a resolution to this for five years, and no one
can help. So if you do come across a fix, be sure to post it for me.

It is just another of my great disappointments with DX4Win as a modern
logger. It was great in 2005, but is far behind now-and the author very
obviously has jumped ship.

What I do, in a long winded away of 'fixing' this issue, is to do a
'Edit/Replace/(Find what) Comment/ (Replace with) Notes/Replace All' on
every ADI file I have to import into DX4Win and that does the trick. But it
is NOT state of the art.

Good DXing - stay safe and healthy.

73.

Ernie Walls VK3FM
vk...@wallsy.com.au
Mobile 0418 301 483

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of N4QS, Dave
Perry
Sent: Wednesday, 24 August 2016 7:18 AM
To: DX4WIN Reflector 
Subject: [Dx4win] Importing JT65

I am trying to import the wsjtx.adi file into DX4WIN.  However, the comments
field from WSJT-X (which contains the signal reports in db format) is being
put into the Notes for the Call field in DX4WIN instead of the Notes for the
QSO field.  I have even tried using Jim's ADIF to DX4WIN utility, but the
comments always go into the Notes for the Call field.

 

Does anyone know how I can change the mapping for the import so that the
Comments from the ADIF file go into the Notes for this QSO field?

 

Any help would be appreciated.

 

Thank you.

 

Dave, N4QS

 

 

 

BTW, I sure wish DX4WIN supported JT9 as a mode.  That is another whole can
of worms to try to work around.  It would also be nice if DX4WIN interfaced
with JTAlert so that QSOs made in WSJT-X were automatically entered into
DX4WIN.  Activity for weak signal modes is booming these days.

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Importing JT65

2016-08-23 Thread N4QS, Dave Perry 
I am trying to import the wsjtx.adi file into DX4WIN.  However, the comments
field from WSJT-X (which contains the signal reports in db format) is being
put into the Notes for the Call field in DX4WIN instead of the Notes for the
QSO field.  I have even tried using Jim's ADIF to DX4WIN utility, but the
comments always go into the Notes for the Call field.

 

Does anyone know how I can change the mapping for the import so that the
Comments from the ADIF file go into the Notes for this QSO field?

 

Any help would be appreciated.

 

Thank you.

 

Dave, N4QS

 

 

 

BTW, I sure wish DX4WIN supported JT9 as a mode.  That is another whole can
of worms to try to work around.  It would also be nice if DX4WIN interfaced
with JTAlert so that QSOs made in WSJT-X were automatically entered into
DX4WIN.  Activity for weak signal modes is booming these days.

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] JT65A

2016-08-10 Thread N4QS, Dave Perry 
Cort,

I use WSJT-X for JT65.  It is also available as a free download.  I setup
both WSJT-X and DX4WIN to run off of the same com port.  But I do not run
them at the same time.  When I want to work JT65, I click on Radio in DX4WIN
and click on Stop Radio, but I keep DX4WIN open.  This disconnects DX4WIN
from the radio and opens up the com port.

I then open WSJT-X and it automatically connects to the radio.  When I am
finished making a JT65 contact, the QSO is saved to the wsjt.log file.  I
then import the log file into DX4WIN.  Just go to File, Import/Export, make
sure ADIF is selected at the top, click on Import, go find the WSJT file in
your directory, double click on it, then when the window for Options for
Duplicates pops up, select Ignore Duplicate QSO.  This will ensure that you
only import any new JT65 QSOs into your DX4WIN log.

Since the signal reports from WSJT-X incorrectly go into the Notes for this
Call field, I then cut and paste to move the signal report information from
that field to the Notes for this QSO field.

When I am done working JT65, I close WSJT-X -- which frees up the com port.
I then click on Radio in DX4WIN and Start Radio to connect the radio back to
DX4WIN.  Again, not elegant but effective.  BTW, it is fun to work weak
signal JT65 on 6m as well as the other HF bands.  So you should give it a
try.

It would be great if Paul would someday start enhancing DX4WIN again.  I am
sure many of us would like to see an automatic interface between WSJT-X and
DX4WIN like there is for MMTTY.  We also need DX4WIN to support JT9 as a
mode.  I might also add that an automatic interface for Fldigi would be
great for the many other digital modes currently available.  But Paul has
been strangely inactive and incommunicado for five or six years now.

For the time being, this is a workaround that is cumbersome but pretty
foolproof.  Good luck.

73,

Dave, N4QS


-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Courtney
Judd
Sent: Wednesday, August 10, 2016 3:14 PM
To: ACG
Cc: SECC; Dx4win@mailman.qth.net
Subject: [Dx4win] JT65A

well, I have been noticing that a lot of good dx is being spotted on
jt65 up around 50276 or so. Don't know anything about this but thought maybe
it might be something worth while to look into. So, I down loaded WSJT and
have it installed but looks to be very confusing to be sure. So any help on
getting me started would be appreciated. I also down loaded the instructions
and I can tell this is going to take some time and effort to get it all
playing correctly. I use DX4WIN for my general logging so maybe I would have
to have both programs open at the same time? Thanks, Cort K4WI
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Help with missing logbook window

2016-07-17 Thread N4QS, Dave Perry 
Have you tried going to the Window tab and clicking on the Logbook?

Dave, N4QS



-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Eric
Rosenberg
Sent: Sunday, July 17, 2016 9:54 PM
To: DX4Win Reflector
Subject: [Dx4win] Help with missing logbook window

I brought up DX4Win this evening having not used it in a while. 
Everything came up except the log window.

I went the QSO box, clicked on Window and then Logbook, and nothing
happened.

All the logs are in the right directory and can be loaded. None of them
allow me to view the log.

What happened? What did I do wrong?

Any help is appreciated.

73,
Eric W3DQ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Windows not opening in DX4WIN

2016-07-12 Thread N4QS, Dave Perry 
Found the answer to my own question.  I just had to go into the Awards
database and reset all awards to default.

Dave, N4QS


-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of N4QS, Dave
Perry
Sent: Tuesday, July 12, 2016 5:58 PM
To: DX4WIN Reflector
Subject: [Dx4win] Windows not opening in DX4WIN

I just noticed that I can no longer generate the windows for State, Grid,
IOTA, Zone, etc.  When I try to open one of them, I get the following error
message:

 

"An exception occurred!

Fixed column count must be less than column count"

 

My country window is still open and working fine, but I am afraid to close
it.  I always keep it open to track band slots.  But I only open the other
windows when I need them.  I must have corrupted a file of some kind.

 

Any help would be appreciated.  Thank you.

 

73,

 

Dave, N4QS

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Windows not opening in DX4WIN

2016-07-12 Thread N4QS, Dave Perry 
I just noticed that I can no longer generate the windows for State, Grid,
IOTA, Zone, etc.  When I try to open one of them, I get the following error
message:

 

"An exception occurred!

Fixed column count must be less than column count"

 

My country window is still open and working fine, but I am afraid to close
it.  I always keep it open to track band slots.  But I only open the other
windows when I need them.  I must have corrupted a file of some kind.

 

Any help would be appreciated.  Thank you.

 

73,

 

Dave, N4QS

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] another question

2016-07-03 Thread N4QS, Dave Perry 
Courtney,

I think that happened to me last year as well.  If memory serves me right, I
think all you do is go to Preferences, Screen and uncheck the Leave All
Windows in Original Position.  Then close and restart the program.  The
windows should move back into the center of the screens.  You can reposition
them the way that you want them and the go back and recheck the Leave All
Windows in Original Position box before you close the program.

73,

Dave, N4QS



-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Courtney
Judd
Sent: Sunday, July 03, 2016 2:26 PM
To: Dx4win@mailman.qth.net
Subject: [Dx4win] another question

Well, another problem! I spent all day yesterday switching over to WIN10
from WIN7... finally got everything working again... sort of When i open
DX4WIN now some of the windows are missing. can't find CW keyboard,zone,
sunrise/sunset and a couple of others from the drop down menu. They are not
behind any of the other windows open I have moved everything around to
check. So they must be off screen somehow. Question is how to get them
back There is plenty of room for these across two monitors but just
can't find them! Thanks for any tips! 73's Cort K4WI
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4WIN and SteppIR?

2016-05-21 Thread N4QS, Dave Perry 
Dennis,

I think I also had to wire a special serial cable to make it all work
properly.  It seemed like the wiring diagram was provided in the help
section of DX4WIN.

Dave, N4QS


-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of N4QS, Dave
Perry
Sent: Saturday, May 21, 2016 11:17 AM
To: 'Dan Violette'; 'RadioDen45'; 'Alan Zack'; 'Paul van der Eijk'
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] DX4WIN and SteppIR?

Dennis,

I used to have a Steppir and it worked very well with DX4WIN.  You have to
go into the Control tab of preferences in DX4WIN and enable the Steppir
functions.  Then you have to go into the menu system of the SDA100 and setup
the controller so that it will track the radio.  It has been a while, but I
think you had to select Kenwood as the radio type.  Once you have the
controller setup correctly, then you have to enable Auto Track on the front
panel of the controller.  It should then retune as the radio changes
frequency every 25 khz.

73,

Dave, N4QS



-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Dan
Violette
Sent: Saturday, May 21, 2016 11:06 AM
To: 'RadioDen45'; 'Alan Zack'; 'Paul van der Eijk'
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] DX4WIN and SteppIR?

I have DX4WIN at home and SteppIR at work club so could not answer direct
with that combo.  As long as DX4WN is following your radio OK then you "Y"
the SDA-100 from the same serial line and it listens in and sets itself too.
See:  http://www.steppir.com/wp-content/uploads/2011/10/Y-Cable.pdf
Dan KI6X

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of RadioDen45
Sent: Saturday, May 21, 2016 6:43 AM
To: Alan Zack ; 'Paul van der Eijk' 
Cc: dx4win@mailman.qth.net
Subject: [Dx4win] DX4WIN and SteppIR?

Hello all you out there in radio land,

I'm trying to setup V8.05 of DX4WIN to control my 3ele Steppir beam, I have
followed the HELP files but NO JOY.  Is any one out there controlling their
SteppIR with DX4WIN?  I'm using the SDA-100 controller...

Thanks in advance for any help.

Dennis, k0eoo 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4WIN and SteppIR?

2016-05-21 Thread N4QS, Dave Perry 
Dennis,

I used to have a Steppir and it worked very well with DX4WIN.  You have to
go into the Control tab of preferences in DX4WIN and enable the Steppir
functions.  Then you have to go into the menu system of the SDA100 and setup
the controller so that it will track the radio.  It has been a while, but I
think you had to select Kenwood as the radio type.  Once you have the
controller setup correctly, then you have to enable Auto Track on the front
panel of the controller.  It should then retune as the radio changes
frequency every 25 khz.

73,

Dave, N4QS



-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Dan
Violette
Sent: Saturday, May 21, 2016 11:06 AM
To: 'RadioDen45'; 'Alan Zack'; 'Paul van der Eijk'
Cc: dx4win@mailman.qth.net
Subject: Re: [Dx4win] DX4WIN and SteppIR?

I have DX4WIN at home and SteppIR at work club so could not answer direct
with that combo.  As long as DX4WN is following your radio OK then you "Y"
the SDA-100 from the same serial line and it listens in and sets itself too.
See:  http://www.steppir.com/wp-content/uploads/2011/10/Y-Cable.pdf
Dan KI6X

-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of RadioDen45
Sent: Saturday, May 21, 2016 6:43 AM
To: Alan Zack ; 'Paul van der Eijk' 
Cc: dx4win@mailman.qth.net
Subject: [Dx4win] DX4WIN and SteppIR?

Hello all you out there in radio land,

I'm trying to setup V8.05 of DX4WIN to control my 3ele Steppir beam, I have
followed the HELP files but NO JOY.  Is any one out there controlling their
SteppIR with DX4WIN?  I'm using the SDA-100 controller...

Thanks in advance for any help.

Dennis, k0eoo 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html