Re: [Dx4win] QSO Window Callsign
Go to sub menu under DX Spots( right click) and click on the opttion. de Vic N5YY On 12/8/2019 6:54 AM, Mike Parnin via DX4WIN wrote: Any Comments ? TNX Mike N4EPD On Friday, December 6, 2019, 1:14:03 PM EST, Mike Parnin via DX4WIN wrote: Is it possible that when the current spot occurs in the DX Spot window that the Callsign as well as that current callsign's information, that does occur, be filled in automatically in the QSO window without clicking on that current spot in the DX Spot window ? TNX Mike N4EPD __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] FTDX101D
FT991A works fine I hear.?? Available at AD1C website On 8/25/2019 5:16 AM, rgarre...@comcast.net wrote: Greetings, Anyone using this new radio with DX4Win? If so, what radio selection are you using to make it work? 73, Bob K3UL __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] minor update suggestion
GM I currently use the "DX Spots (sorted by time) window" showing the cokors set for the WAZ award. This works fine, except whenever the program restarts, the colors revert back to the DXCC setting, rather than the WAZ setting. Could this be "fixed" so that the change would not revert back, but would remain at a setting until changed. Thanks, de Vic, N5YY __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Dx4win] user manual
In case you have not noticed! The printable "HELP" file in the DX4WIN 9.01 "DOCS" folder is the help file, with page numbers, a table of contents, numbered headings, and an index, and is titled : "DX4WIN USER MANUAL". Pretty nice manual Paul! (not to be confused with version 7 manual in same folder) de N5YY __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] I quit
With all the talk of a new version, here is my two cents worth.! I have been a DX4WIn user since version 1.07. Met Paul at Dayton when he was working with Steve. (Already was a user at that point). I was always one of the first to buy every major update, and recommended the program to many, many other hams over the years who also became loyal users. I am tired of promises with no specifics. I am finally looking for another program to switch to! Statements that a new update is coming, and is now in Beta testing etc. is just more vapor-ware as far as I am concerned. This testing could take weeks (already has) or years ( probably will if perfection is wanted)), At this point I am considering all of the major log programs. I would like to be able to enjoy using the program while I am still on the green side of the grass. de Vic, N5YY __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] ICOM IC-7200
Hi Paul I downloaded the manual for reference purposes, and it states the CIV address is 76h, and is changeable. reference is pages 81 and 82 of the 7200 manual. Baud speed is auto. de Vic, N5YY PS I do not have the radio On 1/15/2012 1:22 PM, Paul van der Eijk wrote: Hi, Is anyone using the ICOM IC-7200 with DX4WIN? A user is wondering what the settings should be. The hex radio address would help already. --Paul, KK4HD __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Ver 8.05 and Green Heron rotor controller
The menu you keep referring to is not part of the automatic control. Before you get to that menu, from the QSO window, put the mouse cursor over rotor and click. This brings up the rotor sub menu. Now CLICK ON SHORT PATH and the rotor rotates to the station in the call sign window via short path. The menu you refer to does not get populated from the qso data. It is for manual control. de Vic, N5YY Maybe I can explain this a bit clearer. When I click on a spot in the Packet field of DX4Win Ver 8.05 it populates the logging field with CALL, MODE, BAND and also the Beam Heading of the station automatically. HOWEVER, nothing happens at all in the DX4Win ROTOR TAB section where the Band Info and Beam Headings stay at the defaults of 160 meters DISABLED and 0 degrees. I have enabled the Bands of 40-6 meters to be rotor controlled (set to NORMAL in the Window) in the ROTOR Tab section of DX4Win. I have set the port to the directly connected port of Com2 and I set the port speed to 4800 8-N-1 per suggestion from Green Heron. I can manually plug in beam heading info or change the Band to an enabled rotor band in the ROTOR Tab section and manually cause the rotor to turn ok but shouldnt DX4Win populate the fields from the spot I clicked on? Maybe thats a bit better explanation. Thanks for any help... maybe someone can at least verify that the ROTOR Tab does get populated from the spot window when clicking on a specific station. __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Dx4win] Rig file for the Yaesu FT 950
Guy, This change made no difference. Jim, Again, for everybodys' information, I am using FT-9000 V31. Under preferences, baud rate is 4800, poll rate 5000, DTR and CTS both checked. The FT-950 is working except for the panorama function. Spots go to the radio properly when the spot is clicked on in the spot window (including split freq spots), and the progran reads the freq properly from the radio and puts it into the logbook. Sending spots also seems OK. The problem with the panorama function is the S meter is pegged at max as the freq is scanned. When a signal is received. the display s meter reading dipsaccording to the strength of the signal. de Vic, N5YY ex AE5DX - Original Message - From: ON4AOI [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: dx4win@mailman.qth.net Sent: Saturday, May 24, 2008 4:07 AM Subject: RE: [Dx4win] Rig file for the Yaesu FT 950 Correct Jim, For those that wanna try Edit the following in FT9000v3i file To use with FT-950 (with Textpad or similar editor) ORIGINAL PART === [RC-Read S meter] CSTR=SM0; CDELAY=260 LEN=7 LOC=Other MODIFIED PART === [RC-Read S meter] CSTR=RM1; CDELAY=260 LEN=7 LOC=Other Guy ON4AOI -Oorspronkelijk bericht- Van: Jim Reisert AD1C [mailto:[EMAIL PROTECTED] Verzonden: zaterdag 24 mei 2008 0:12 Aan: Steve Schneider CC: [EMAIL PROTECTED] Onderwerp: Re: [Dx4win] Rig file for the Yaesu FT 950 I think Guy ON4AOI has been doing some work on the Yaesu radio files. He might be able to give you a better answer. 73 - Jim AD1C --- Steve Schneider [EMAIL PROTECTED] wrote: Jim, I tried the FT2000 rig control and that worked somewhat. I downloaded the HRD rig control program and haven't tried it yet. 4800 baud rate is on the program and the rig so that should be ok. I'll check the RTS and DTS boxes and see what happens. Thanks! 73 de Steve, K3IZ - Original Message From: Jim Reisert AD1C [EMAIL PROTECTED] To: Steve Schneider [EMAIL PROTECTED] Sent: Friday, May 23, 2008 2:26:43 AM Subject: Re: [Dx4win] Rig file for the Yaesu FT 950 You sure the baud rate is correct? I think think default for Yaesu is 4800 baud, if DX4WIN doesn't match, you'll have to uncheck the default box and put in 4800. Also play around with the RTS and DTR check boxes. Someone on the reflector says 950 mostly works, you can check the archives. Does the radio work with any other program? - Jim On 5/22/2008 11:45 AM, Steve Schneider wrote: Jim, I tried Version 7.04 and the FT9000-v31 file. It did not communicate. No spots or anything. I also tried the FT 2000 and also nothing. I did try the Yaesu FT 2000 rig control software and that works somewhat but after about 10 minutes it looses commication between the radio and computer. Oh well I'll keep trying and see what happens. Thanks for yur help on this. 73 de Steve, K3IZ - Original Message From: Jim Reisert AD1C [EMAIL PROTECTED] To: Steve Schneider [EMAIL PROTECTED] Sent: Monday, May 19, 2008 4:10:46 PM Subject: Re: [Dx4win] Rig file for the Yaesu FT 950 Try 7.04 and the FT9000-v3i file. Let me know it works for you. 73 - Jim AD1C --- Steve Schneider [EMAIL PROTECTED] wrote: DX4Winners, Will there be an upgrade for a rig file for the Yaesu FT 950? I have tried to use the setting for the FT 2000 but it it didn't work. Any help is greatly appreciated. Thanks de Steve, K3IZ -- Jim Reisert AD1C/Ø, [EMAIL PROTECTED], http://www.ad1c.us No virus found in this incoming message. Checked by AVG. Version: 7.5.524 / Virus Database: 269.24.0/1461 - Release Date: 22/05/2008 16:44 No virus found in this outgoing message. Checked by AVG. Version: 7.5.524 / Virus Database: 269.24.1/1463 - Release Date: 23/05/2008 15:36 ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] BUG IN 4.04?
Is it me or is it a bug? I have VE and K placed in the spotters box in packet 1 under preferences. This is supposed to limit packet spots to those originated in VE and K land. I am however, getting spots from all countries. I do not have Paul's e-mail address so could somebody relay this (if necessary). de Vic, N5YY ex AE5DX ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
Re: [Dx4win] BUG IN 4.04? NOT!
Not a bug. Operator error. I was looking at wrong window. de Vic, N5YY - Original Message - From: Victor West [EMAIL PROTECTED] To: Dx4win@mailman.qth.net Sent: Tuesday, May 20, 2008 12:50 PM Subject: [Dx4win] BUG IN 4.04? Is it me or is it a bug? I have VE and K placed in the spotters box in packet 1 under preferences. This is supposed to limit packet spots to those originated in VE and K land. I am however, getting spots from all countries. I do not have Paul's e-mail address so could somebody relay this (if necessary). de Vic, N5YY ex AE5DX ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] FT-950 and DX4WIN 7.04
The new FT-2000 radio file does not appear to work with the FT-950 (split freq issues cause timeout and lockout), however the FT 9000 V 31 file seems to work on everything except the panorama scanner. This function begins displaying S9+ and dips when a signal is present (opposite of what it should do). Otherwise, the split frequency now seems to work OK with incoming spots, and setting the qsx frequency when sending a spot to the network. Does anybody else get the same results? de Vic, N5YY ex AE5DX ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
Re: [Dx4win] Rig file for the Yaesu FT 950
I am another person patiently awaiting a FT-950 file. de Vic, N5YY ex AE5DX - Original Message - From: Jim Reisert AD1C [EMAIL PROTECTED] To: Steve Schneider [EMAIL PROTECTED] Cc: Dx4win@mailman.qth.net Sent: Tuesday, May 13, 2008 1:08 PM Subject: Re: [Dx4win] Rig file for the Yaesu FT 950 --- Steve Schneider [EMAIL PROTECTED] wrote: Will there be an upgrade for a rig file for the Yaesu FT 950? I have tried to use the setting for the FT 2000 but it it didn't work. Any help is greatly appreciated. That's a good question, Steve. I know Paul has been diligently working on FT-2000 and FT-9000 support. I don't know how this translates to FT-950 support. - Jim -- Jim Reisert AD1C/Ø, [EMAIL PROTECTED], http://www.ad1c.us ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
Re: [Dx4win] Rig file for the Yaesu FT 950
For general info, the FT9000 v3.1 file seems to work best with the FT-950. Split freq does not always seem to work correctly, panaramic display does not work, and the radio timeout will lock up the computer if the radio is turned off while connected to DX4WIN. But it does work, even if not correctly. de Vic, N5YY ex AE5DX - Original Message - From: Victor West [EMAIL PROTECTED] To: [EMAIL PROTECTED]; Steve Schneider [EMAIL PROTECTED] Cc: Dx4win@mailman.qth.net Sent: Tuesday, May 13, 2008 7:15 PM Subject: Re: [Dx4win] Rig file for the Yaesu FT 950 I am another person patiently awaiting a FT-950 file. de Vic, N5YY ex AE5DX - Original Message - From: Jim Reisert AD1C [EMAIL PROTECTED] To: Steve Schneider [EMAIL PROTECTED] Cc: Dx4win@mailman.qth.net Sent: Tuesday, May 13, 2008 1:08 PM Subject: Re: [Dx4win] Rig file for the Yaesu FT 950 --- Steve Schneider [EMAIL PROTECTED] wrote: Will there be an upgrade for a rig file for the Yaesu FT 950? I have tried to use the setting for the FT 2000 but it it didn't work. Any help is greatly appreciated. That's a good question, Steve. I know Paul has been diligently working on FT-2000 and FT-9000 support. I don't know how this translates to FT-950 support. - Jim -- Jim Reisert AD1C/Ø, [EMAIL PROTECTED], http://www.ad1c.us ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Yaesu FT-450
If you have DX4WIN fully functioning with the Yaesu FT-450, please send me your setup. I have tried the two FT-9000 drivers, and they do not work with split frequencies. They set VFO A but do not set VFO B. Similar problem with the FT-2000 driver used with the FT-450. De Vic, N5YY - Original Message - From: Stan Whicker [EMAIL PROTECTED] To: Dx4win@mailman.qth.net Sent: Saturday, October 27, 2007 9:58 AM Subject: [Dx4win] Yaesu FT-450 Try the driver for FT-9000. I have it working on My Setup. Stan ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Yaesu FT-450
Any word on when a good radio driver for the Yaesu FT-450 will be available for DX4WIN? I am using the FT-2000 driver but it does not function completely. de Vic, N5YY From [EMAIL PROTECTED] Sat Oct 27 10:58:36 2007 From: [EMAIL PROTECTED] (Stan Whicker) Date: Sat Oct 27 11:59:13 2007 Subject: [Dx4win] Yaesu FT-450 Message-ID: [EMAIL PROTECTED] Try the driver for FT-9000. I have it working on My Setup. Stan
[Dx4win] Help: Yaesu FT-897 CAT control not communicating with DX4Win
I too am waiting for a driver for the FT-897. de Vic, AE5DX - Original Message - From: Erik Mellgren [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Thursday, February 27, 2003 4:25 PM Subject: [Dx4win] Help: Yaesu FT-897 CAT control not communicating with DX4Win DX4WIN has no radio setting for my Yaesu FT-897 rig. How do I get it to work? Other programs like FTBase, TRX-Manager and YP-log (FT-817 setup) is working 100 percent OK with my FT-897 rig. Erik/SM0JCA --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html --- ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Help: Yaesu FT-897 CAT control not communicating with DX4Win
Tnx Steve Just tried it and it appears to work fine. Reads band and mode OK from the radio and setting the frequency appears to work. Clicking on a spot appears to work OK. I copied the FT847 in the radio database, then changed the baud rate and renamed it to FT897. de Vic, AE5DX - Original Message - From: Steve Bookout [EMAIL PROTECTED] To: Victor West [EMAIL PROTECTED]; Erik Mellgren [EMAIL PROTECTED]; dx4win@mailman.qth.net Sent: Friday, February 28, 2003 6:24 PM Subject: Re: [Dx4win] Help: Yaesu FT-897 CAT control not communicating with DX4Win Hello all, I was chatting the other day with VE7QC and he was wondering the same thing. Both of us knowing that many of the rig drivers are the same, he checked a few out (Yeasu ones) and found that the driver for the FT-847 works when set to 4800 baud rate. 73 de Steve, NR4M At 11:02 AM 2/28/2003 -0600, Victor West wrote: I too am waiting for a driver for the FT-897. de Vic, AE5DX - Original Message - From: Erik Mellgren [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Thursday, February 27, 2003 4:25 PM Subject: [Dx4win] Help: Yaesu FT-897 CAT control not communicating with DX4Win DX4WIN has no radio setting for my Yaesu FT-897 rig. How do I get it to work? Other programs like FTBase, TRX-Manager and YP-log (FT-817 setup) is working 100 percent OK with my FT-897 rig. Erik/SM0JCA --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html --- ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win - -Steve Bookout, NR4M (ex NJ4F) Rapidan Data Systems 'DX4WIN...The way logging programs should be!' Free demo at http://www.dx4win.com ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Help: Yaesu FT-897 CAT control not communicating with DX4Win
To add a bit more, I noticed that DX4WIN reads SSB when the FT897 is set to the digital modes. Just passing this on for info. No problem for me. de Vic, AE5DX - Original Message - From: Victor West [EMAIL PROTECTED] To: Erik Mellgren [EMAIL PROTECTED]; dx4win@mailman.qth.net; Steve Bookout [EMAIL PROTECTED] Sent: Friday, February 28, 2003 7:09 PM Subject: Re: [Dx4win] Help: Yaesu FT-897 CAT control not communicating with DX4Win Tnx Steve Just tried it and it appears to work fine. Reads band and mode OK from the radio and setting the frequency appears to work. Clicking on a spot appears to work OK. I copied the FT847 in the radio database, then changed the baud rate and renamed it to FT897. de Vic, AE5DX - Original Message - From: Steve Bookout [EMAIL PROTECTED] To: Victor West [EMAIL PROTECTED]; Erik Mellgren [EMAIL PROTECTED]; dx4win@mailman.qth.net Sent: Friday, February 28, 2003 6:24 PM Subject: Re: [Dx4win] Help: Yaesu FT-897 CAT control not communicating with DX4Win Hello all, I was chatting the other day with VE7QC and he was wondering the same thing. Both of us knowing that many of the rig drivers are the same, he checked a few out (Yeasu ones) and found that the driver for the FT-847 works when set to 4800 baud rate. 73 de Steve, NR4M At 11:02 AM 2/28/2003 -0600, Victor West wrote: I too am waiting for a driver for the FT-897. de Vic, AE5DX - Original Message - From: Erik Mellgren [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Thursday, February 27, 2003 4:25 PM Subject: [Dx4win] Help: Yaesu FT-897 CAT control not communicating with DX4Win DX4WIN has no radio setting for my Yaesu FT-897 rig. How do I get it to work? Other programs like FTBase, TRX-Manager and YP-log (FT-817 setup) is working 100 percent OK with my FT-897 rig. Erik/SM0JCA --- StripMime Report -- processed MIME parts --- multipart/alternative text/plain (text body -- kept) text/html The reason this message is shown is because the post was in HTML or had an attachment. Attachments are not allowed. To learn how to post in Plain-Text go to: http://www.expita.com/nomime.html --- ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win - -Steve Bookout, NR4M (ex NJ4F) Rapidan Data Systems 'DX4WIN...The way logging programs should be!' Free demo at http://www.dx4win.com ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] DX Spotting Window
Set the TNC command Headerln to on de Vic, AE5DX - Original Message - From: John Kjos [EMAIL PROTECTED] To: DX4WIN dx4win@mailman.qth.net Sent: Sunday, December 29, 2002 7:42 PM Subject: [Dx4win] DX Spotting Window Hi, A friend of mine is just setting up his DX4WIN. He is seeing Dx spots in the packet window, but they dont show up in the DX Spot window. Forgive me, but I cant remember what to do. Thanks- John EMAIL: [EMAIL PROTECTED] MY WEBSITE: http://www.w9rpm.com BLUFF COUNTRY DX CLUB: http://www.qsl.net/w9idx/ LACROSSEHAMS: http://www.lacrossehams.org/ Free Ham Radio Classified Ads: http://swap.QTH.com INSTANT MESSENGER: W9RPM ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] Band/mode tracking
Been a while since I have used my 920, but..It could be that in the process of changing bands, you brought up a memory rather than VFO A or B. DX4WIN does not communicate with memories, but the memories do act like VFOs as far as the radio is concerned. de Vic - Original Message - From: Todd Strait [EMAIL PROTECTED] To: Mark Endorf [EMAIL PROTECTED]; dx4win@mailman.qth.net Sent: Monday, March 18, 2002 8:08 PM Subject: Re: [Dx4win] Band/mode tracking Hi Mark, I have had my FT920 since ver. 4.x and am currently on 5.3 and I can't remember seeing this phenomenon. I have had on occasion where the rig seemed to lock up and had to re-boot the computer and shut off the radio to get them conversing again although this has been very rare over the years. 73, Todd WM8C's Ham Links More http://wm8c.0catch.com http://www.angelfire.com/mi2/wm8c http://www.qsl.net/wm8c - Original Message - From: Mark Endorf [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Monday, March 18, 2002 8:07 PM Subject: [Dx4win] Band/mode tracking Just an observation that I thought I would share. I noticed sometime after trying to work the Ducie operation split on 15M, the frequency and mode in real time logging were not being displayed in DX4WIN correctly. Using an FT-920 with VFO A on the receive frequency, and VFO B on my transmit frequency, I would periodically change bands on the receive VFO to check on the other Ducie station. At the end of the evening DX4WIN only showed 15M SSB, no mater what band, mode, or VFO combination I tried. I had to correct several QSO's by memory, that all were logged as 15M-SSB. It got fixed by turning the rig and computer off, then back on again. Anyone else seen this? DX4WIN or FT-920 problem? Mark - WA0MHJ ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] No System Beep
Try turning on the Packet Cluster Beep command. Type Set/beep to turn it on, or Set/nobeep to turn it off. Additionally, the use bell command in DX4WIN packet 1 preferences must be checked. de Vic, AE5DX Logging and station control at AE5DX is accomplished using DX4WIN, version 5.03 - Original Message - From: KC4ALG J Sartain [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Tuesday, January 01, 2002 9:11 PM Subject: Re: [Dx4win] No System Beep I have checked my preferences settings, sent commands to the cluster I log onto, gotten advice over the reflector, and even burned ashes to read over tea leaves. Nothing I have tried in the last few weeks has restored the beep that used to come with each DX spot. All I can figure out is that maybe a cluster or windows update somewhere along the line has stopped it. J Sartain KC4ALG [EMAIL PROTECTED] - Original Message - From: Dave Perry [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Tuesday, January 01, 2002 9:00 PM Subject: Re: [Dx4win] No System Beep Same thing happened to me just a week or so ago. My system beep stopped working. Dave, N4QS [EMAIL PROTECTED] - Original Message - From: Larry Burke WI5A [EMAIL PROTECTED] To: dx4win@mailman.qth.net Sent: Monday, December 31, 2001 9:56 PM Subject: [Dx4win] No System Beep Posted this question a couple of weeks ago, but got no replies. Wonder if anyone can suggest what to look at to get my system beep back the one that notifies you that a new band/mode country has been spotted. It used to work, then just disappeared not sure what I might have done to make it stop working. I have system beep selected under Packet 1 in Preferences, but no joy. Things work just fine if I select CW announce, call (voice notification), etc. but not when system beep is selected. When it worked it used to produce a noise like ding.wav. Larry Wi5A ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
