Tony,
DX4WIN always opens on whatever band and mode my K3 is set on when the
software loads. Actually it opens to the last contact and then I just hit
F9 to clear and the software then reads the radio and lists the correct band
and mode. I am using the Elecraft K3 X4 radio file. That one works better
than the Elecraft K3 radio file.
Dave, N4QS
- Original Message -
From: Tony McClenny n...@n3me.net
To: Dx4win@mailman.qth.net
Sent: Saturday, October 31, 2009 6:13 AM
Subject: [Dx4win] 30 Meter (USB) Error
My Elecraft K3 radio always opens in USB mode and I have tried the
following
to correct this:
1. File | Databases | Radio
2. Select Elecraft K3
3. Select Values tab
4. In mode values, select CW
5. You will see the values 3 and 7
6. Select the check box next to the word Prefer in the second row
7. File save changes and exit
When I do the above with the radio on or off, the software loses contact
with the radio and if I open File | Preferences | Radio - the radio states
None.
I have tried both the Elecraft K3 and Elecraft K3 X4
I am operating radio interface at 38400, Address 00
Any other ideas?
- Tony, N3ME -
118 Ashwood Street
Bethany Beach, DE 19930-9699
Grid: FM28lm
http://www.n3me.net
Elecraft K3 # 2462
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html