Re: [Dx4win] DX4WIN Version 7.06 and the FT2000 and FT9000
I believe Paul swapped the commands to send freq and mode from 7.05 to 7.06: "The radio driver now writes the frequency first followed by the mode; this change was needed for K3 radios" This could be the cause of the difference you noticed. - Jim On Mon, Dec 8, 2008 at 2:01 PM, Louis Dietrich <[EMAIL PROTECTED]> wrote: > DX4Winers, > and Paul > > I am experiencing some problems with the latest version... > > Using identical rig files, as we used in 7.05.03 , here's what is happening > in 7.06.02. > > 1. If the rig is on SSB and I click on a CW spot, say 7044, the rig goes > to 7044.7. If I click on the same spot again, the rig shows 7044... > 2. If I then click on another CW spot, the rig goes to the correct > frequency. > 3. If I then click on a SSB spot 14185 (Rig still on CW), the rig goes > to 14184.3. If I click on the same spot, the frequency read 14185... > > Something has changed in the latest version of DX4WIN > > I have switched back and forth between the versions...and have the same rig > files in both > > Can anyone else verify the above? > > 73 > > Lou N2TU -- Jim Reisert AD1C/Ø, <[EMAIL PROTECTED]>, http://www.ad1c.us ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
RE: [Dx4win] DX4WIN Version 7.06 and the FT2000 and FT9000
All, Thanks to John, W9RPM!...He told me to change the CW Freq Display Menu 055 on the FT9000 and menu 061 on the FT2000D to "direct"... This seems to clear up my problem...but it is only in Version 7.06 where I've experienced this... So maybe the above will help some of the 2000/9000 users... Again, Thanks John! 73 Lou N2TU -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Louis Dietrich Sent: Monday, December 08, 2008 5:02 PM To: dx4win@mailman.qth.net Subject: [Dx4win] DX4WIN Version 7.06 and the FT2000 and FT9000 DX4Winers, and Paul I am experiencing some problems with the latest version... Using identical rig files, as we used in 7.05.03 , here's what is happening in 7.06.02. 1. If the rig is on SSB and I click on a CW spot, say 7044, the rig goes to 7044.7. If I click on the same spot again, the rig shows 7044... 2. If I then click on another CW spot, the rig goes to the correct frequency. 3. If I then click on a SSB spot 14185 (Rig still on CW), the rig goes to 14184.3. If I click on the same spot, the frequency read 14185... Something has changed in the latest version of DX4WIN I have switched back and forth between the versions...and have the same rig files in both Can anyone else verify the above? 73 Lou N2TU ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win
[Dx4win] DX4WIN Version 7.06 and the FT2000 and FT9000
DX4Winers, and Paul I am experiencing some problems with the latest version... Using identical rig files, as we used in 7.05.03 , here's what is happening in 7.06.02. 1. If the rig is on SSB and I click on a CW spot, say 7044, the rig goes to 7044.7. If I click on the same spot again, the rig shows 7044... 2. If I then click on another CW spot, the rig goes to the correct frequency. 3. If I then click on a SSB spot 14185 (Rig still on CW), the rig goes to 14184.3. If I click on the same spot, the frequency read 14185... Something has changed in the latest version of DX4WIN I have switched back and forth between the versions...and have the same rig files in both Can anyone else verify the above? 73 Lou N2TU ___ Dx4win mailing list Dx4win@mailman.qth.net http://mailman.qth.net/mailman/listinfo/dx4win