It has been this way in DX4WIN for some time. There are many cases
where you need to enter a 3-digit RST for SSB contacts, i.e.:
Aurora: 57A
73 - Jim AD1C
On 10/17/2009 7:41 AM, LY2CX wrote:
Lost a good feature in the v 8.02.
In the old version V1.2, when use Real-time ( F9) or Off-time entry and
SSB mode - rstS and rstR fields set to
two digit (59)
After entry in the field rstS two digits (e.g. 59) the cursor jumps
to the next field rstR - this was in the old 1.2 version.
In the new one (8.02) when use Real-time ( F9) or Off-time entry and SSB
mode
rstS and rstR set also to two digit, BUT,
after enter to the field rstS two digits (e.g. 59) the cursor
stays here and I need to use TAB key to get in the next field as well
as to get out of the rstR.
And this is needed to repeat with every logged QSO. It slows down
logging.
This Tab key is not needed when CW, but when SSB.
Is this the way for ever, or some settings can help to solve this ?
Regards,
Vigis, LY2CX
--
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
