Re: [Ekiga-list] I get "Could not register. Method not allowed" error. What does it mean?
On 18/07/12 19:56, L. Rahyen wrote: On Tuesday 17 July 2012 10:12:51 Eugen Dedu wrote: The only way to see where the problem is is to send us a -d 4 output I have attached the output to this message. I have deleted previous configuration, created SIP account from scratch and tried to call some local phone. Then pressed Chat->Quit. Ekiga exited with segmentation fault (it always exits with segmentation fault). Well, ekiga sends all messages to itself, hence the error. ekiga listens on port 5060, and asterisk seems to listen on the same port. Two programs cannot listen on the same port. Either use ekiga on a machine different than asterisk, or try asterisk to listen on another port (different than 5060) and modify ekiga and all phones to use the other port, or tell ekiga to listen on another port (gconf-editor, apps/ekiga/protocols/sip/listen_port, hope it works since it is not well tested). -- Eugen ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] I get "Could not register. Method not allowed" error. What does it mean?
On 13/07/12 10:33, L. Rahyen wrote: I'm trying to use Ekiga as SIP client on the same computer I have asterisk running. I do not have router or firewall in my local network. Ekiga does not work for me at all. I created SIP account in it, as my Name, User and Authentication User I have entered my SIP login, as password - my SIP password, as "Registrar" - IP address of my asterisk SIP server (192.168.1.2) - the same one I use in my hardware SIP phones. And I get "Could not register. Method not allowed" (visible in Edit->Accounts). On start up, after some time, I get message "Could not register sip:myname@192.168.1.2", and then "Ekiga did not manage to configure your network settings automatically. ... Please see [link] for instructions". But the link is about configuring routers which I do not have. I do not have firewall either. Just network switch and gateway, some other computers and hardware SIP phones in my local network. And this is probably irrelevant anyway, because Ekiga and Asterisk are on the same computer. I use default 5060 port in sip.conf. I have created separate account in sip.conf for software phone. If I try to use this new account in hardware SIP phone, it works. But Ekiga does not. If I ignore the errors and try to dial some phone number (local or global - does not matter), I get "Remote user is busy" immediately. If I try to enter in the Registrar field 192.168.1.2:5060, only error I get is "Ekiga did not manage to configure your network settings automatically ...", and no other errors. But the result is the same: I get "Remote user is busy" immediately when trying to dial a number. Asterisk log, even in the most verbose mode, does not show any attempt to register (or anything else) when I run Ekiga. Since it looks like there are plenty of people who use Ekiga as SIP client, I assume I'm doing something wrong. I cannot figure out what exactly by myself, so I will appreciate any help. The error "Ekiga did not manage..." is shown because your network is connected to Internet through a NAT which is not (well) supported by ekiga. However, you do not want to connect to Internet, so this message is irrelevant in your case. You can avoid it by manually checking Disable/Enable network detection in Preferences. Now, you say you have a registration error (the call error is normal, since you are not registered). The only way to see where the problem is is to send us a -d 4 output, see http://wiki.ekiga.org/index.php/Debugging_Ekiga#How_to_get_a_debug_output. "Method not allowed" simply means, as far as I know, that asterisk answers with an error which translated into English gives exactly that ("Method not allowed"). -- Eugen Dedu http://eugen.dedu.free.fr ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list
[Ekiga-list] I get "Could not register. Method not allowed" error. What does it mean?
I'm trying to use Ekiga as SIP client on the same computer I have asterisk running. I do not have router or firewall in my local network. Ekiga does not work for me at all. I created SIP account in it, as my Name, User and Authentication User I have entered my SIP login, as password - my SIP password, as "Registrar" - IP address of my asterisk SIP server (192.168.1.2) - the same one I use in my hardware SIP phones. And I get "Could not register. Method not allowed" (visible in Edit->Accounts). On start up, after some time, I get message "Could not register sip:myname@192.168.1.2", and then "Ekiga did not manage to configure your network settings automatically. ... Please see [link] for instructions". But the link is about configuring routers which I do not have. I do not have firewall either. Just network switch and gateway, some other computers and hardware SIP phones in my local network. And this is probably irrelevant anyway, because Ekiga and Asterisk are on the same computer. I use default 5060 port in sip.conf. I have created separate account in sip.conf for software phone. If I try to use this new account in hardware SIP phone, it works. But Ekiga does not. If I ignore the errors and try to dial some phone number (local or global - does not matter), I get "Remote user is busy" immediately. If I try to enter in the Registrar field 192.168.1.2:5060, only error I get is "Ekiga did not manage to configure your network settings automatically ...", and no other errors. But the result is the same: I get "Remote user is busy" immediately when trying to dial a number. Asterisk log, even in the most verbose mode, does not show any attempt to register (or anything else) when I run Ekiga. Since it looks like there are plenty of people who use Ekiga as SIP client, I assume I'm doing something wrong. I cannot figure out what exactly by myself, so I will appreciate any help. ___ ekiga-list mailing list ekiga-list@gnome.org https://mail.gnome.org/mailman/listinfo/ekiga-list