Re: [Ekiga-list] Newbie ekiga Linux problems
Le lundi 02 juin 2008 à 09:04 -0400, Mark T.B. Carroll a écrit : > Damien Sandras <[EMAIL PROTECTED]> writes: > > > Can you provide a -d 4 output ? > > I shall arrange one. > > > Or perhaps you are running the gtkonly version ? Some distributions are > > shipping a gtkonly version full of bugs, I would recommend against using > > it. > > Oh, really? Gosh! I am indeed running a gtkonly one to avoid having to > be assimilated by the gnomular stuff. I should try with a different > version then. Thanks for the clue. (-: (I'm using Debian. I assume this > is another of the not-actually-very-maintained packages. ): ) Indeed... It is one of the problems with that package ;-) -- _ Damien Sandras (o- //\Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:[EMAIL PROTECTED] ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie ekiga Linux problems
Damien Sandras <[EMAIL PROTECTED]> writes: > Can you provide a -d 4 output ? I shall arrange one. > Or perhaps you are running the gtkonly version ? Some distributions are > shipping a gtkonly version full of bugs, I would recommend against using > it. Oh, really? Gosh! I am indeed running a gtkonly one to avoid having to be assimilated by the gnomular stuff. I should try with a different version then. Thanks for the clue. (-: (I'm using Debian. I assume this is another of the not-actually-very-maintained packages. ): ) Mark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie ekiga Linux problems
Le lundi 02 juin 2008 à 08:11 -0400, Mark T.B. Carroll a écrit : > Damien Sandras <[EMAIL PROTECTED]> writes: > > > The error message means that another application is already using the > > port Ekiga is trying to open (probably UDP 5060 for SIP or TCP 1720 for > > H.323 or both). > > Unfortunately from my original message you can see that this is not so. > > > Another possibility would be that you have no network interface ready > > when Ekiga starts. > > This is also not so - I was online just fine and its config had the > correct interface selected. Can you provide a -d 4 output ? Or perhaps you are running the gtkonly version ? Some distributions are shipping a gtkonly version full of bugs, I would recommend against using it. -- _ Damien Sandras (o- //\Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:[EMAIL PROTECTED] ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie ekiga Linux problems
Damien Sandras <[EMAIL PROTECTED]> writes: > The error message means that another application is already using the > port Ekiga is trying to open (probably UDP 5060 for SIP or TCP 1720 for > H.323 or both). Unfortunately from my original message you can see that this is not so. > Another possibility would be that you have no network interface ready > when Ekiga starts. This is also not so - I was online just fine and its config had the correct interface selected. Mark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie ekiga Linux problems
Le dimanche 01 juin 2008 à 14:01 -0400, Mark T.B. Carroll a écrit : [...] > Mind you, I'm about to change ISP, and I could compile SIP and H.323 > support into my NAT box - might that fix the error I saw? I'm just kind > of surprised from the error message that ekiga gave that it didn't seem > to be able to distinguish between errors caused by ports already being > taken on my local machine so that it couldn't bind to them, and errors > caused by needing to forward ports on a separate router! The error message means that another application is already using the port Ekiga is trying to open (probably UDP 5060 for SIP or TCP 1720 for H.323 or both). Another possibility would be that you have no network interface ready when Ekiga starts. -- _ Damien Sandras (o- //\Ekiga Softphone : http://www.ekiga.org/ v_/_ NOVACOM : http://www.novacom.be/ FOSDEM : http://www.fosdem.org/ SIP Phone : sip:[EMAIL PROTECTED] ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie ekiga Linux problems
On 6/1/08, Mark T.B. Carroll <[EMAIL PROTECTED]> wrote: > "Oisin Feeley" <[EMAIL PROTECTED]> writes: > >> On Sat, May 31, 2008 at 11:15 AM, Mark T.B. Carroll <[EMAIL PROTECTED]> >> wrote: [snip] >> 2. That your firewall is set up correctly. The wiki >> http://wiki.ekiga.org/index.php/Ekiga_behind_a_NAT_router has a wealth of >> information on the topic (although the first-time setup GUI should have >> given you information about it you can run it again by >> Edit -> Configuration Druid > > I have it set to use STUN with stun.ekiga.net - might that not suffice? > The NAT test thing said "Port Restricted NAT". That should be fine. The other possible culprit then is that you have a previous instance of ekiga running which hasn't been killed properly. Looking at your original email again I see that I missed this line: "When I quit ekiga, the window closes but it just hangs and doesn't terminate." So, it's quite possible that you have a previous instance of ekiga hanging around. You can check for sure with "netstat -p -l | grep ekiga" and follow it up with a "killall ekiga" or just kill the PID mentioned in the /ekiga column output from the above. Hope that helps, I'm out of easy ideas after that. Best wishes, Oisin Feeley ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie ekiga Linux problems
Mark T.B. Carroll wrote: >> 2. That your firewall is set up correctly. The wiki >> http://wiki.ekiga.org/index.php/Ekiga_behind_a_NAT_router has a wealth of >> information on the topic (although the first-time setup GUI should have >> given you information about it you can run it again by >> Edit -> Configuration Druid > > I have it set to use STUN with stun.ekiga.net - might that not suffice? No. Read the wiki. > The NAT test thing said "Port Restricted NAT". Possibly the problem... > Mind you, I'm about to change ISP, and I could compile SIP and H.323 > support into my NAT box If you are implementing your own NAT then it should be easy to fix. ael ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie ekiga Linux problems
"Oisin Feeley" <[EMAIL PROTECTED]> writes: > On Sat, May 31, 2008 at 11:15 AM, Mark T.B. Carroll <[EMAIL PROTECTED]> > wrote: (snip) >> When I start ekiga, it tells me I won't be able to receive incoming >> calls. However, it just says 'Error while starting the listener ...' and >> 'check no other program is running on the port used ...' without saying >> anything about what the error was or what port it's talking about! Not >> that I'm aware of any reason why anything else would be listening on >> such ports: > > Have you tried: > 1. Making sure that Ekiga is trying to use the correct network interface: > Edit -> Preferences -> Protocols -> Network Settings -> Network Interface: > ListenOn Good idea. It is using the correct interface. > 2. That your firewall is set up correctly. The wiki > http://wiki.ekiga.org/index.php/Ekiga_behind_a_NAT_router has a wealth of > information on the topic (although the first-time setup GUI should have > given you information about it you can run it again by > Edit -> Configuration Druid I have it set to use STUN with stun.ekiga.net - might that not suffice? The NAT test thing said "Port Restricted NAT". Mind you, I'm about to change ISP, and I could compile SIP and H.323 support into my NAT box - might that fix the error I saw? I'm just kind of surprised from the error message that ekiga gave that it didn't seem to be able to distinguish between errors caused by ports already being taken on my local machine so that it couldn't bind to them, and errors caused by needing to forward ports on a separate router! (And, of course, it still doesn't see my camera, although previous versions of things did, and mplayer still does. ): ) > 3. You can get more information by running ekiga from the command line with > the highest debugging level "ekiga -d 4" Aha, that might tell me what I've been complaining about missing, thanks. (-: Mark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
Re: [Ekiga-list] Newbie ekiga Linux problems
On Sat, May 31, 2008 at 11:15 AM, Mark T.B. Carroll <[EMAIL PROTECTED]> wrote: > Perhaps I'm missing some documentation - if so, just point me toward > what I'm meant to be looking at that answers these. > > I'm using Ekiga 2.0.11 under 64-bit Linux 2.6.24. > > When I start ekiga, it tells me I won't be able to receive incoming > calls. However, it just says 'Error while starting the listener ...' and > 'check no other program is running on the port used ...' without saying > anything about what the error was or what port it's talking about! Not > that I'm aware of any reason why anything else would be listening on > such ports: Have you tried: 1. Making sure that Ekiga is trying to use the correct network interface: Edit -> Preferences -> Protocols -> Network Settings -> Network Interface: ListenOn 2. That your firewall is set up correctly. The wiki http://wiki.ekiga.org/index.php/Ekiga_behind_a_NAT_router has a wealth of information on the topic (although the first-time setup GUI should have given you information about it you can run it again by Edit -> Configuration Druid 3. You can get more information by running ekiga from the command line with the highest debugging level "ekiga -d 4" Hope some of that helps. The wiki and the archives of this mailing list are probably the most helpful thing though. Best wishes, Oisin ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list
[Ekiga-list] Newbie ekiga Linux problems
Perhaps I'm missing some documentation - if so, just point me toward what I'm meant to be looking at that answers these. I'm using Ekiga 2.0.11 under 64-bit Linux 2.6.24. When I start ekiga, it tells me I won't be able to receive incoming calls. However, it just says 'Error while starting the listener ...' and 'check no other program is running on the port used ...' without saying anything about what the error was or what port it's talking about! Not that I'm aware of any reason why anything else would be listening on such ports: $ netstat -l -A inet Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State tcp0 0 *:auth *:* LISTEN tcp0 0 localhost:smtp *:* LISTEN udp0 0 *:bootpc*:* udp0 0 evangeline.aetion.i:ntp *:* udp0 0 localhost:ntp *:* udp0 0 *:ntp *:* $ When I quit ekiga, the window closes but it just hangs and doesn't terminate. Most annoying, though, is that it won't detect my camera. (USB Logitech QuickCam Pro.) The same camera used to work with an older ekiga at one time on my previous computer. I'm currently using the uvcvideo module v0.1.0 and I do have v4l2_pwplugin.so (from libpt-1.10.10). mplayer sees my camera just fine with device=/dev/video0:driver=v4l2 and uvcvideo says, uvcvideo: Found UVC 1.00 device (046d:08cb) Yet, ekiga doesn't seem to detect it at all. What it's doing when I press the 'Detect' button I have no idea. Where should I start with all this? I'm also curious about how Ekiga gets on with videotelephony to Mac users. I had a bit of a look at XMeeting but the project looks rather dead of late and my impression is that iChat expects XMPP. Mark ___ ekiga-list mailing list ekiga-list@gnome.org http://mail.gnome.org/mailman/listinfo/ekiga-list