Re: [Elecraft] Elecraft CW Net Announcement

[Fred Jensen]

On 8/25/2012 8:04 PM, kevinr wrote:
> Good Evening,
>
> Please join us tomorrow afternoon and evening.
>
> 1) Hail signs  (first letter or two of the suffix of your call)
> 2) NCS help  (as well as QSP/QNP  help)
>
> Sunday 2200z (Sunday 3 PM PDT) 14050 kHz
> Monday 0200z (Sunday 7 PM PDT)  7045 kHz

OK, I guess I either didn't get the memo or didn't read it, this is why 
I haven't found you on 40m recently. I'll check into NCN on 80 at 1900 
PDT and then zip up to 40 and see if I can get in with the E-crowd. 
I'll be gone at 1500 for the 20, probably couldn't hear you anyway.

73,

Fred K6DGW
- Northern California Contest Club
- CU in the 2012 Cal QSO Party 6-7 Oct 2012
- www.cqp.org


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] Elecraft SSB net announcement

[Phillip Shepard]

The weekly Elecraft SSB net will meet tomorrow (8/26/12) at 1800Z on 14.3035
MHz +/- QRM. I will be the net control from western Oregon.  See you there.

73,

Phil, NS7P

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3FF Budd Dipole

[Fred Jensen]

On 8/25/2012 6:50 PM, Jeff Herr wrote:
> I attended a very informative presentation today by Budd Drummond, the
> budd-dipole inventor.
>
> I thought it was buddy-pole, I was wrong.

No you weren't, I just sold my Deluxe Buddipole.  The name was 
embroidered on the canvas bag it fit into, and all the documentation 
said "Buddipole."  It's a great field antenna.  I sold mine after 
several years of good use because of weight ... I've gotten attracted to 
Summits on the Air [SOTA], I'm a little mobility challenged from 
injuries in my 20's [The "Bulletproof and Immortal Period" in my life], 
and I really needed to reduce the weight of my pack.

It's a great antenna, lots of possible configurations, really fun to 
experiment with.  I was sad as I shipped it off to Jon.

If you have one, go register at the Yahoo Buddipole Group.  You will 
enjoy the antenna[s], there's way more than one antenna with a buddipole.

73,

Fred K6DGW
- Northern California Contest Club
- CU in the 2012 Cal QSO Party 6-7 Oct 2012
- www.cqp.org


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] Elecraft CW Net Announcement

[kevinr]

Good Evening,

Please join us tomorrow afternoon and evening.

1) Hail signs  (first letter or two of the suffix of your call)
2) NCS help  (as well as QSP/QNP  help)

Sunday 2200z (Sunday 3 PM PDT) 14050 kHz
Monday 0200z (Sunday 7 PM PDT)  7045 kHz

Stay well,
   Kevin.  KD5ONS
-
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] Pigtail has sold

[wb5xx]

Thanks for all the interest it has been sold.

73'
George wb5xx
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] K3FF Budd Dipole

[Jeff Herr]

I attended a very informative presentation today by Budd Drummond, the
budd-dipole inventor.

I thought it was buddy-pole, I was wrong.

 

Anyway it was good.  Glad I ordered the product to go with the kx3.

 

 

 

Jeff Herr

4636 Kelton Way

Sacramento,CA 95838

916.925.6089

her...@comcast.net

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] FS: Elecraft K3 Deluxe Weighted Tuning Knob Combo with Ball Bearing Finger Dimple

[David and Dianne on Comcast]

Hi Everyone,

Offering for sale a like new  Elecraft K3 Deluxe 
Weighted Tuning Knob Combo with Ball Bearing 
Finger Dimple as seen at the 73 CNC website: 
http://www.73cnc.com/Elecraft_K3_Deluxe_Main_and_VFO_B_Knob_Combo_p/k3deluxecombo.htm
 


This set is in like new condition and without flaw 
or mar.  I purchased it in late May.

New, this set new sells for $170. The 73cnc web 
site has been showing this as out of stock since 
the beginning of the summer.

I will sell the set for $140 shipped in the USA.

It is a beautiful addition to the K3 and a joy to 
use in tuning. It's a chance to get yours without 
waiting for the restocking later by 73cnc.

Please  contact me with you questions or interest 
off this list at n...@arrl.net

Thanks and 73 de N1LQ-Dave




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K1 building problem - VFO not working

[Stan AE7UT]

Got the right transistor put it and all is working well.

Thanks for all the help!
You guys are great.

73
Stan AE7UT



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K1-building-problem-VFO-not-working-tp7561287p7561642.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] simple(st) panadapter for K3?

[Matt Maguire]

Well, it depends what you mean by the terms "simple" and "cheap".

You need to be able to get IF out -- I think you need a KXV3A modules for that. 
Then you need an I/Q mixer to provide baseband I/Q signals for sampling by your 
PC soundcard, the cheapest option probably being a softrock:
http://fivedash.com

A crystal-locked one is fine if you have a crystal close to the K3's IF, or 
else a Si570 frequency-agile one is more expense but more flexible. You will 
get some LO leakage out the antenna connection of the softrock, so you probably 
want to build a buffer amplifier to provide some isolation. Of course, there is 
more sophisticated high quality SDR hardware available in the marketplace, but 
of course you pay more. You choose your compromises :-) 

73, Matt VK2ACL.

On 26/08/2012, at 6:37 AM, "Franki ON5ZO"  wrote:

> Howdy folks
> 
> Can someone please tell me if there is a simple way, and if so: how, to make 
> the PC (soundcard + screen + some software) function as a panadapter for the 
> K3?
> Without buying a P3 or LP-Pan hardware that is. I'm looking for a simple and 
> more important cheap solution.
> 
> TNX / 73 de Franki ON5ZO 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] K3 and Alpha 87A SWR

[Gary K9GS]

Whoops...make Pentode=Tetrode


On 8/22/2012 8:26 PM, Gary K9GS wrote:
> I've been following this thread with interest.
>
> I have a K3 and an Alpha 8100.  The 8100 uses a pair of Pentodes fed
> through a swamped grid.  I believe the Alpha 99 does as well.  I think
> this is why Merv and I have never seen issues involving the coax length.
>
> For the record, the Alpha manual for the 8100 does state to NOT use a
> tuner in the exciter.
>
>
> On 8/22/2012 7:10 PM, Merv Schweigert wrote:
>> I use a 99 with the K3 and any length coax works just fine,  it there is
>> SWR on the
>> line there is a problem someplace,   have never had to cut a coax to any
>> particular
>> length.
>> If theres SWR its either a ground differential problem between the amp
>> and radio chassis or the
>> tuned input is not correct,  or the amps input resistor has been cooked.
>> Merv K9FD/KH6
>>> On Aug 22, 2012, at 1:01 PM, Jim Brown  wrote:
>>>
>>>  
 You
 might try engaging the auto tuner in the K3 if you have one.

>>> Be aware that both the Alpha 87A and 99 manuals tell you "NEVER use an 
>>> automatic antenna tuner into or through the [87A or 99].  This will cause 
>>> damage to the Input Wattmeter&  Input Relay."
>>>
>>> It's largely because of this prohibition that I don't even have a KAT3 in 
>>> my K3.
>>>
>>> Bud, W2RU
>>> __
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft@mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> .
>>>
>>>  
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>

-- 


73,

Gary K9GS

Greater Milwaukee DX Association: http://www.gmdxa.org
Society of Midwest Contesters: http://www.w9smc.com
CW Ops #1032   http://www.cwops.org



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] simple(st) panadapter for K3?

[Franki ON5ZO]

Howdy folks

Can someone please tell me if there is a simple way, and if so: how, to make 
the PC (soundcard + screen + some software) function as a panadapter for the 
K3?
Without buying a P3 or LP-Pan hardware that is. I'm looking for a simple and 
more important cheap solution.

TNX / 73 de Franki ON5ZO 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] [K3] Memory Editor error

[Fred Jensen]

I see this same error message, never more than once, and all the 
memories end up correct.

73,

Fred K6DGW
- Northern California Contest Club
- CU in the 2012 Cal QSO Party 6-7 Oct 2012
- www.cqp.org

On 8/25/2012 6:29 AM, Dick Dievendorff wrote:
> There are up to ten retries after this message. If all ten retries fail
> (each would issue this message), then a further "NoResponseException" is
> generated.
> It appears that the first retry succeeded in your case.


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] FS: K3/100 with options (and a K2, too)

[Andrew Moore]

Thanks Adrian, I didn't realize the filenames were case sensitive.

Fixed now - either /k3 or /K3 should work (same for K2)

Last time! :)


On Sat, Aug 25, 2012 at 3:20 PM, Adrian  wrote:

> Its lower case;
>
> http://www.maineware.net/k3/
>
> http://www.maineware.net/k2/
>
>
> -Original Message-
> From: elecraft-boun...@mailman.qth.net
> [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ian Kahn
> Sent: Sunday, 26 August 2012 5:05 AM
> To: Andrew Moore
> Cc: Elecraft
> Subject: Re: [Elecraft] FS: K3/100 with options (and a K2, too)
>
> Getting file not found errors on the URLs.
>
> Ian, KM4IK
> On Aug 25, 2012 2:24 PM, "Andrew Moore"  wrote:
>
> > I've had a couple people ask for details/pricing, so I'm sorry if my
> > message wasn't clear.
> >
> > All the details (accessories, high res photos) can be found at the
> > links in the original message.
> >
> > Use the following links:
> >
> > For the K2:
> > http://www.maineware.net/K2
> >
> > For the K3:
> > http://www.maineware.net/K3
> >
> > --
> >
> > Thanks,
> > --Andrew, NV1B
> > Maineware, LLC
> >
> >
> > On Sat, Aug 25, 2012 at 10:37 AM, Andrew Moore  > >wrote:
> >
> > > I told myself if the KX3 impressed me enough after I had a chance to
> > > evaluate it, I'd make it my only rig. While it's not a substitute
> > > for a
> > K2
> > > or K3, it's the best blend of portability, performance, power
> > consumption,
> > > etc. for my needs.
> > >
> > > So...
> > >
> > > K2/10 with accessories $795
> > > maineware.net/k2
> > >
> > > K3/100 with accessories $1900
> > > maineware.net/k3
> > >
> > > --Andrew, NV1B
> > > ..
> > >
> > >
> > __
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net Please help support this email
> > list: http://www.qsl.net/donate.html
> >
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] FS: K3/100 with options (and a K2, too)

[Adrian]

Its lower case;

http://www.maineware.net/k3/

http://www.maineware.net/k2/


-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ian Kahn
Sent: Sunday, 26 August 2012 5:05 AM
To: Andrew Moore
Cc: Elecraft
Subject: Re: [Elecraft] FS: K3/100 with options (and a K2, too)

Getting file not found errors on the URLs.

Ian, KM4IK
On Aug 25, 2012 2:24 PM, "Andrew Moore"  wrote:

> I've had a couple people ask for details/pricing, so I'm sorry if my 
> message wasn't clear.
>
> All the details (accessories, high res photos) can be found at the 
> links in the original message.
>
> Use the following links:
>
> For the K2:
> http://www.maineware.net/K2
>
> For the K3:
> http://www.maineware.net/K3
>
> --
>
> Thanks,
> --Andrew, NV1B
> Maineware, LLC
>
>
> On Sat, Aug 25, 2012 at 10:37 AM, Andrew Moore  >wrote:
>
> > I told myself if the KX3 impressed me enough after I had a chance to 
> > evaluate it, I'd make it my only rig. While it's not a substitute 
> > for a
> K2
> > or K3, it's the best blend of portability, performance, power
> consumption,
> > etc. for my needs.
> >
> > So...
> >
> > K2/10 with accessories $795
> > maineware.net/k2
> >
> > K3/100 with accessories $1900
> > maineware.net/k3
> >
> > --Andrew, NV1B
> > ..
> >
> >
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] FS: K3/100 with options (and a K2, too)

[Ian Kahn]

Getting file not found errors on the URLs.

Ian, KM4IK
On Aug 25, 2012 2:24 PM, "Andrew Moore"  wrote:

> I've had a couple people ask for details/pricing, so I'm sorry if my
> message wasn't clear.
>
> All the details (accessories, high res photos) can be found at the links in
> the original message.
>
> Use the following links:
>
> For the K2:
> http://www.maineware.net/K2
>
> For the K3:
> http://www.maineware.net/K3
>
> --
>
> Thanks,
> --Andrew, NV1B
> Maineware, LLC
>
>
> On Sat, Aug 25, 2012 at 10:37 AM, Andrew Moore  >wrote:
>
> > I told myself if the KX3 impressed me enough after I had a chance to
> > evaluate it, I'd make it my only rig. While it's not a substitute for a
> K2
> > or K3, it's the best blend of portability, performance, power
> consumption,
> > etc. for my needs.
> >
> > So...
> >
> > K2/10 with accessories $795
> > maineware.net/k2
> >
> > K3/100 with accessories $1900
> > maineware.net/k3
> >
> > --Andrew, NV1B
> > ..
> >
> >
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] [K2] Setting the AGC Threshold Section of Build

[Don Singer]

Thanks Don. CB checked out at 7.85v and removed resistor. Current drain test 
was good at .14a

Best Don KF7DS

Don Wilhelm  wrote:

>Don. measure the voltage at the output side of Control Board 4.  It 
>should be in the vicinity  of 8 volts.
>
>I would suggest removing the 15k resistor and checking the voltage at CB 
>U2 pin 5.  If that voltage is 3.7 volts or more, that will work out just 
>fine.  If lower than 3.7 volts, add back the resistor and set he AGC 
>Threshold voltage for somewhere between 3.75 amd 3.8 volts as measured 
>at Control Board U2 pin 5.
>
>73,
>Don W3FPR
>
>On 8/24/2012 8:39 PM, Don Singer wrote:
>> I am finishing the first phase of my K2 build, and everything has gone
>> well up to this point. All resistance and voltage tests are fine.
>>
>> When I went to set the AGC Threshold as per page 47 of the K2 Manual, I
>> got 5.0 volts as the lowest setting I could achieve when adjusting R1 on
>> the Control Board , so I followed the instructions at the top of page 48
>> and followed the AGC Level Application Note and installed the 15K
>> resistor between pins 3 and 4 of RP6 on the Control Board.
>>
>> The resistance across the 15k resistor, once installed on the Control
>> Board on pins 3 and 4, was 3K. I reflowed the solder to see if I could
>> get the 3.5k ohms specified on the worksheet, but still got 3K and
>> thought that is good enough.
>>
>> I reassembled the K2 and ran the AGC Threshold section again - but,
>> instead of being closer to 3.8 volts, I am now at 6.2 volts as the
>> lowest reading I could get. The lowest voltage went up and not down? Why
>> is that?
>>
>> I am not sure if this is meaningful or not so I am holding from moving
>> forward until I know if this is an issue, or just move on, or remove the
>> 15k resistor across pins 3 and 4 of RP6?
>>
>> Thanks,
>> Don KF7DS
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] FS: K3/100 with options (and a K2, too)

[Andrew Moore]

I've had a couple people ask for details/pricing, so I'm sorry if my
message wasn't clear.

All the details (accessories, high res photos) can be found at the links in
the original message.

Use the following links:

For the K2:
http://www.maineware.net/K2

For the K3:
http://www.maineware.net/K3

--

Thanks,
--Andrew, NV1B
Maineware, LLC


On Sat, Aug 25, 2012 at 10:37 AM, Andrew Moore wrote:

> I told myself if the KX3 impressed me enough after I had a chance to
> evaluate it, I'd make it my only rig. While it's not a substitute for a K2
> or K3, it's the best blend of portability, performance, power consumption,
> etc. for my needs.
>
> So...
>
> K2/10 with accessories $795
> maineware.net/k2
>
> K3/100 with accessories $1900
> maineware.net/k3
>
> --Andrew, NV1B
> ..
>
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] notification received

[Randy Hall]

Hi

Received notification yesterday for shipping within the next week. Ordered
June 2 at the SEA PAC hamfest.

2231-0951-0180

Randy
K7AGE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] FS: K3/100 with options (and a K2, too)

[Andrew Moore]

I told myself if the KX3 impressed me enough after I had a chance to
evaluate it, I'd make it my only rig. While it's not a substitute for a K2
or K3, it's the best blend of portability, performance, power consumption,
etc. for my needs.

So...

K2/10 with accessories $795
maineware.net/k2

K3/100 with accessories $1900
maineware.net/k3

--Andrew, NV1B
..
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] FS:Pignology/Pigtail

[wb5xx]

Selling the Pigtail as I don't need anymore.Works great with KX3,K3,K2 and 
other radios.See the below site for more info.Price shipped USPS is $100.00 and 
I will pay Paypal charge.Contact direct if interested.

Thanks
George wb5xx 

pignology.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] Winner Announcement for TDiH Mountaintop Musical Chairs QRP Contest on Monte Sano

[CRAIG W BEHRENS]

Saturday, 8/18/12, eight intrepid QRPers competed in the Mountaintop Musical 
Chairs QRP Contest on Monte Sano.
They competed in the Monte Sano State Park Campgrounds despite being tired from 
a long day of Huntsville Hamfest activities and being stuffed full of Southern 
BBQ and Gibson's fresh-baked pies.
The 40M/20M band conditions were less than sterling, to say the least. The 
KX3's fed makeshift antennas and straight keys were used.
The total operating period for each team was a meager 30 minutes, or so.
And . . . Just about the time each team started to make contacts -- We made 
them run 500' to the otter station for the last half of their allotted time.
Despite these handicaps, all four teams of two operators did a respectable job. 
The contest results is as follows:
1st with 600 Points: TEAM 4A/B: Bob Kimbrell--W0AO/Lee Heirs--AA4GA
2nd with 520 Points: TEAM 1A/B: Greg Lane--N4KGL/Bob Leasko--WB8PAF
3rd with 320 Points: TEAM 3A/B: Tom Hardison--K4ZGB/Joe Gerry--W3GW

4th with 240 Points: TEAM 2A/B:Larry Morphew--NS4Q/Bobby Drummond--AK4JA

Larry Anderson--K5LDA/4 won as the outside competitor by contacting five of our 
eight operators.

All prizes have been awarded for our contest and the seven QRP Forums conducted 
as part of the Two Days in Huntsville QRP events.

Thanks again to all of our participants and to all who made this third TDiH a 
great success!

72/73 & DX,
Craig W. Behrens -- NM4T
  
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] KX3 DVR

[Keith Heimbold]

That is exciting for sure. I already love the noise blanker. Works amazingly 
well for only one setting. I must have gotten lucky!

Keith
AG6AZ

Sent from my iPhone please excuse typos

On Aug 25, 2012, at 6:35 AM, "Bill Conkling"  wrote:

> Did you read the ERRATA SHEET that came with your radio?  It says, "
>Manual
>
>Pg. 51: Some specifications are still shown as TBD (to be determined). 
> These will be updated when final
>measurements have been completed.
>Firmware (MCU rev. 1.02, DSP rev. 0.89)
>The features listed below are described in the manual but not 
> implemented:
> * Noise Reduction (NR)
> * Multiple noise-blanker settings (NB); at present the blanker can only 
> be turned on or off
> * Auto-notch (workaround: manual notch)
> * Extended single-sideband transmit (MENU:TX ESSB)
> * Absolute S-meter mode (MENU:SMTR MD)
> * CW transmit in SSB mode (automatic offset during keying)
> * DVR message record/play
> 
> Have patience...
> 
> ...bill nr4c
> -Original Message-
> From: Dom M1KTA [mailto:dombai...@yahoo.com] 
> Sent: Saturday, August 25, 2012 5:53 AM
> To: elecraft@mailman.qth.net
> Subject: [Elecraft] KX3 DVR
> 
> How do you get DVR on lsb/usb to work with KX3?
> 
> I press MSG/REC and it says N/A
> 
> 72
> 
> Dom
> C5/M1KTA
> 
> 
> 
> --
> View this message in context: 
> http://elecraft.365791.n2.nabble.com/KX3-DVR-tp7561618.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] KX3 DVR

[Bill Conkling]

Did you read the ERRATA SHEET that came with your radio?  It says, "
Manual

Pg. 51: Some specifications are still shown as TBD (to be 
determined). These will be updated when final
measurements have been completed.
Firmware (MCU rev. 1.02, DSP rev. 0.89)
The features listed below are described in the manual but not 
implemented:
*    Noise Reduction (NR)
*    Multiple noise-blanker settings (NB); at present the blanker can only 
be turned on or off
*    Auto-notch (workaround: manual notch)
*    Extended single-sideband transmit (MENU:TX ESSB)
*    Absolute S-meter mode (MENU:SMTR MD)
*    CW transmit in SSB mode (automatic offset during keying)
*    DVR message record/play

Have patience...

...bill nr4c
-Original Message-
From: Dom M1KTA [mailto:dombai...@yahoo.com] 
Sent: Saturday, August 25, 2012 5:53 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] KX3 DVR

How do you get DVR on lsb/usb to work with KX3?

I press MSG/REC and it says N/A

72

Dom
C5/M1KTA



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/KX3-DVR-tp7561618.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] OT: Mac Vs Windows

[Chris Hembree]

I would just like to add one thing. I switched over to a Mac book pro intel 
duel core, 5 years ago. I just installed Mountain Lion about 2 weeks ago. ( 
only because I wanted  to.)
I always skip a year on upgrades. So I went from Snow to Mountain Lion. 
Mountain Lion works great on my computer. I always do a new install by 
formatting  the hard drive. 
clean every thing out. This is a pain in the butt if you forget to save 
anything. The install is much cleaner and works much better this way.

73's Chris W7CTH
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] [K3] Memory Editor error

[Dick Dievendorff]

There are up to ten retries after this message. If all ten retries fail
(each would issue this message), then a further "NoResponseException" is
generated.
It appears that the first retry succeeded in your case.

Dick, K6KR


-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Al Lorona
Sent: Friday, August 24, 2012 11:15 PM
To: Elecraft Reflector
Subject: [Elecraft] [K3] Memory Editor error



Occasionally when writing memories to the K3 with the Frequency Memory
Editor I see the following error in the write status window:

WriteMemory2State.OnTimerExpiry

yet the memories always seem to be written correctly. 

Should I be concerned with this error?

Al  W6LX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] KX3/K3 Operating Tip: Working a pileup using dual watch instead of SPLIT

[Dom M1KTA]

Wayne,

It works the other way too (as in the reverse) when you are the DX station
:-) Listening to the all important TX freq is easy, especially when you hear
the policemen get involved.

You turn (ear drums allowing for loud stations) the filters wide
irrespective of mode (unless you have to alter) and turn the AGC off or set
the threshold high, turn RX eq off (set to max accross the board).

72

Dom
6W/M1KTA (15-22 Aug 2012)
C5/M1KTA (22-29 Aug 2012)
M1KTA (Home call)



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/KX3-K3-Operating-Tip-Working-a-pileup-using-dual-watch-instead-of-SPLIT-tp7557196p7561624.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] MacLoggerDX vs RUMlog

[Mike]

RUMLog also uses SQLite db, and has a built-in custom query screen where 
you can enter SQL.

73, Mike NF4L

On 8/24/12 7:51 PM, Phil Hystad wrote:
> My opinion.
>
> I use MacLoggerDX mainly because all I need is a good database and with UI 
> entry, edit, and display screens.  I like the fact that the log is stored in 
> SQLite databases so I can easily access directly with my own programs for 
> doing various things -- like computing the total distance of all my 
> accumulated QSOs by summing over all the distance measures between my QTH and 
> the other end where it is available.  If not available I just guess.
>
> PEH
>
>
> On Aug 24, 2012, at 2:33 PM, Matt Maguire  wrote:
>
>> What are the reasons you prefer MacLoggerDX over RumLog? Is it purely 
>> because of the iPad companion application, or are there other reasons as 
>> well to choose MacLoggerDX over RUMLog? How is the integration with the 
>> Elecraft KX3?
>>
>> 73, Matt VK2ACL
>>
>> On 25/08/2012, at 12:41 AM, "David Ferrington, M0XDF" 
>>  wrote:
>>
>>> Quite a lot of software is available for OSX (iMac OS) now and I think 
>>> MacLoggerDx is one of the best (although not free) and has a companion 
>>> version for iPad. It does a lot, including rig control. See 
>>> http://www.dogparksoftware.com/MacLoggerDX.html
>>> There is a forum too http://two.pairlist.net/mailman/listinfo/dogparklist 
>>> and http://groups.yahoo.com/group/macloggerdx/
>>>
>>> For digital modes, there is cocoamodem, very good and has an interface to 
>>> MacLoggerDX (via OSX scripting language - AppleScript).
>>> See http://www.w7ay.net/site/Applications/cocoaModem/index.html (Chen is an 
>>> ex Apple engineer and all his software is good).
>>>
>>> There are plenty of other logging programs, including 
>>> http://www.k1gq.com/SkookumLogger/, http://www.aetherlog.com, 
>>> http://www.dl2rum.de/rumsoft/RUMLog.html (free) and many more.
>>>
>>> A good place to look is http://machamradio.com which is "Devoted entirely 
>>> to amateur radio operators using macintosh"
>>>
>>> 73 de David, M0XDF (K3 #174, P3 #108)
>>>
>>> Some tortures are physical / And some are mental, / But the one that is 
>>> both / Is dental. -Ogden Nash, poet (1902-1971)
>>>
>>> On 24 Aug 2012, at 14:44, Paul and Sue Huff wrote:
>>>
 Please forgive me for a slightly off-topic post but I know that the 
 collective
 wisdom of the people on this list can give me a lot of good advice.

 My shack computer is getting a little "long in the tooth" and I am 
 starting to
 research a replacement machine.  My current ham usage for the computer 
 consists
 of logging and some digital work, but future rig control could be 
 something that
 I would be interested in doing.  Recent experience with a new iPad has 
 created a
 very positive impression for me regarding Apple products but I know that 
 "in the
 old days" most ham radio software was designed for Windows only.

 So my question is this - Are there now good choices available for ham radio
 software (logging, digital, rig control) that will run on OSx computers?

 BTW, I know that Linux is a popular operating system for ham radio these 
 days
 but I don't really know anything about it.  I can certainly try to learn,
 however the computer has other uses in the family and so I would need to 
 be able
 to easily switch it back into it's "standard" manufacturers configuration 
 for my
 wife who is even less techie than I am.

 Any and all opinions would be appreciated.

 73,
 Paul - N8XMS

 __
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
>>> __
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft@mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this emai

Re: [Elecraft] MacLoggerDX vs RUMlog

[David Ferrington, M0XDF]

I've been using MLDX for a long time, before RumLog was available and never 
really looked at RumLog, so no reasons really and can't say if one is better 
than the other. MLDX/K3/KX3 integration is good. I understand RumLog has some 
specific functions for K3, so I will give it a try someday.
73 de David, M0XDF (K3 #174, P3 #108)
Success is the ability to go from failure to failure without losing your 
enthusiasm. - Winston Churchill (1874 - 1965).

On 24 Aug 2012, at 22:33, Matt Maguire wrote:

> What are the reasons you prefer MacLoggerDX over RumLog? Is it purely because 
> of the iPad companion application, or are there other reasons as well to 
> choose MacLoggerDX over RUMLog? How is the integration with the Elecraft KX3?
> 
> 73, Matt VK2ACL
> 
> On 25/08/2012, at 12:41 AM, "David Ferrington, M0XDF"  
> wrote:
> 
>> Quite a lot of software is available for OSX (iMac OS) now and I think 
>> MacLoggerDx is one of the best (although not free) and has a companion 
>> version for iPad. It does a lot, including rig control. See 
>> http://www.dogparksoftware.com/MacLoggerDX.html
>> There is a forum too http://two.pairlist.net/mailman/listinfo/dogparklist 
>> and http://groups.yahoo.com/group/macloggerdx/
>> 
>> For digital modes, there is cocoamodem, very good and has an interface to 
>> MacLoggerDX (via OSX scripting language - AppleScript).
>> See http://www.w7ay.net/site/Applications/cocoaModem/index.html (Chen is an 
>> ex Apple engineer and all his software is good).
>> 
>> There are plenty of other logging programs, including 
>> http://www.k1gq.com/SkookumLogger/, http://www.aetherlog.com, 
>> http://www.dl2rum.de/rumsoft/RUMLog.html (free) and many more.
>> 
>> A good place to look is http://machamradio.com which is "Devoted entirely to 
>> amateur radio operators using macintosh"
>> 
>> 73 de David, M0XDF (K3 #174, P3 #108)
>> 
>> Some tortures are physical / And some are mental, / But the one that is both 
>> / Is dental. -Ogden Nash, poet (1902-1971)
>> 
>> On 24 Aug 2012, at 14:44, Paul and Sue Huff wrote:
>> 
>>> Please forgive me for a slightly off-topic post but I know that the 
>>> collective 
>>> wisdom of the people on this list can give me a lot of good advice.
>>> 
>>> My shack computer is getting a little "long in the tooth" and I am starting 
>>> to 
>>> research a replacement machine.  My current ham usage for the computer 
>>> consists 
>>> of logging and some digital work, but future rig control could be something 
>>> that 
>>> I would be interested in doing.  Recent experience with a new iPad has 
>>> created a 
>>> very positive impression for me regarding Apple products but I know that 
>>> "in the 
>>> old days" most ham radio software was designed for Windows only.
>>> 
>>> So my question is this - Are there now good choices available for ham radio 
>>> software (logging, digital, rig control) that will run on OSx computers?
>>> 
>>> BTW, I know that Linux is a popular operating system for ham radio these 
>>> days 
>>> but I don't really know anything about it.  I can certainly try to learn, 
>>> however the computer has other uses in the family and so I would need to be 
>>> able 
>>> to easily switch it back into it's "standard" manufacturers configuration 
>>> for my 
>>> wife who is even less techie than I am.
>>> 
>>> Any and all opinions would be appreciated.
>>> 
>>> 73,
>>> Paul - N8XMS
>>> 
>>> __
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft@mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>> 
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] KX3 DVR

[Dom M1KTA]

Gr. I like the radio but had to wait for ages and seems some things like
this missing. 

ho hum.

72
C5/M1KTA



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/KX3-DVR-tp7561618p7561621.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] KX3 DVR

[Dom M1KTA]

How long? It is in the manual and been in all the blurb and on the web site for 
ages.

OK hope the voice lasts another 3 days as on dxpedition ;-)

72

Dom



>
> From: Oliver Dröse [via Elecraft] 
>To: Dom M1KTA  
>Sent: Saturday, 25 August 2012, 11:21
>Subject: Re: KX3 DVR
> 
>
>Dom, 
>
>it's not available yet, thus the N/A. Still on the DSP firmware list of 
>Lyle. Last word was "might still take a few month's time" ... 
>
>73, Olli - DH8BQA 
>
>
>
>- Original Message - 
>From: "Dom M1KTA" <[hidden email]> 
>To: <[hidden email]> 
>Sent: Saturday, August 25, 2012 11:52 AM 
>Subject: [Elecraft] KX3 DVR 
>
>
>
>> How do you get DVR on lsb/usb to work with KX3? 
>> 
>> I press MSG/REC and it says N/A 
>> 
>> 72 
>> 
>> Dom 
>> C5/M1KTA 
>> 
>> 
>> 
>> -- 
>> View this message in context: 
>> http://elecraft.365791.n2.nabble.com/KX3-DVR-tp7561618.html
>> Sent from the Elecraft mailing list archive at Nabble.com. 
>> __ 
>> Elecraft mailing list 
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email] 
>> 
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> 
>> 
>> - 
>> E-Mail ist virenfrei. 
>> Von AVG uberpruft - www.avg.de 
>> Version: 2012.0.2197 / Virendatenbank: 2437/5222 - Ausgabedatum: 
>> 24.08.2012 
>> 
>__ 
>Elecraft mailing list 
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:[hidden email] 
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>
>
>>
> 
>If you reply to this email, your message will be added to the discussion 
>below:http://elecraft.365791.n2.nabble.com/KX3-DVR-tp7561618p7561619.html 
>To unsubscribe from KX3 DVR, click here.
>NAML 
>
>



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/KX3-DVR-tp7561618p7561620.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Elecraft] KX3 DVR

[Oliver Dröse]

Dom,

it's not available yet, thus the N/A. Still on the DSP firmware list of 
Lyle. Last word was "might still take a few month's time" ...

73, Olli - DH8BQA



- Original Message - 
From: "Dom M1KTA" 
To: 
Sent: Saturday, August 25, 2012 11:52 AM
Subject: [Elecraft] KX3 DVR


> How do you get DVR on lsb/usb to work with KX3?
>
> I press MSG/REC and it says N/A
>
> 72
>
> Dom
> C5/M1KTA
>
>
>
> --
> View this message in context: 
> http://elecraft.365791.n2.nabble.com/KX3-DVR-tp7561618.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> -
> E-Mail ist virenfrei.
> Von AVG uberpruft - www.avg.de
> Version: 2012.0.2197 / Virendatenbank: 2437/5222 - Ausgabedatum: 
> 24.08.2012
> 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Elecraft] KX3 DVR

[Dom M1KTA]

How do you get DVR on lsb/usb to work with KX3?

I press MSG/REC and it says N/A

72

Dom
C5/M1KTA



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/KX3-DVR-tp7561618.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html