Re: [Elecraft] [KX3] connection KX3-KXPA100-KAT500
Whenever you want to use the KPA500, make sure you set the KX3 menu item PA Mode to OFF. You can assign this menu item to one of the PF function keys for convenience. 73, Matt VK2RQ On 29 Jul 2014, at 1:15 pm, Scott via Elecraft wrote: > Hi all, > I have a KX3 with ATU and a KXPA100 with ATU (an overkill, I know, but I > didn't buy them together and they are for operating separately in the field). > I would like hook both the KXPA100 and my K3 to the KAT500 in the shack > through a coaxial switch, but I can't get the new KXPA100 to play well with > the KAT500. The amp keeps changing from bypass to auto and sometimes the atu > in the KX3 also kicks out of bypass. The rig and amp/atu work fine connected > directly to the antenna. > > I am still learning with the new amp, but if anyone has suggestions they are > welcome. > > 73, Scott. XE1/AA0AA, AA0AA > > Sent from Scott's iPad > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to matt.vk...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] [KX3] connection KX3-KXPA100-KAT500
Hi all, I have a KX3 with ATU and a KXPA100 with ATU (an overkill, I know, but I didn't buy them together and they are for operating separately in the field). I would like hook both the KXPA100 and my K3 to the KAT500 in the shack through a coaxial switch, but I can't get the new KXPA100 to play well with the KAT500. The amp keeps changing from bypass to auto and sometimes the atu in the KX3 also kicks out of bypass. The rig and amp/atu work fine connected directly to the antenna. I am still learning with the new amp, but if anyone has suggestions they are welcome. 73, Scott. XE1/AA0AA, AA0AA Sent from Scott's iPad __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Notch causes distortion on SSB RX
what you hear is a fast time constant on the auto notch. The faster time constant makes the notch respond faster but it also allows it to attack "purer" tones in the audio. The effect is more noticeable on strong signals with flat AGC curves where all frequencies in the audio passband are of similar levels. The effect is a result of the design decisions made by the DSP programmer - a tradeoff between notch effectiveness and fidelity. 73, ... Joe, W4TV On 2014-07-28 9:11 PM, Sam Morgan wrote: hard to describe, it's like the audio is getting chopped up, not sure this would explain it, but it's kind of like the sound of someone gargling being overlayed over the signal audio. A combination of that and the sound of NR @ 5-1. if the band is very quiet and the signals strong it's very pronounced, if the band is noisy it's not as pronounced On 7/28/2014 7:52 PM, Dick Dickinson wrote: What type of distortion are you hearing? Dick - KA5KKT == I am noticing a bit of distortion on SSB signals when I enable the AUTO Notch. Is there some setting I can change to eliminate the distorted sound I am hearing now? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Notch causes distortion on SSB RX
At time like this I appreciate having "non-critical" hearing capability (deaf in one ear, ringing in both). My K3 sounds great under all conditions -- and no fan I have makes any noise :-) Phil W7OX On 7/28/14, 6:05 PM, Bill W2BLC wrote: Hello Sam in Ole Angelo, The distortion you are noticing is very real and has bothered me to no end. It is discussed on a couple of websites, that I am sure the "experts" will jump in and tell you all about. I did some research on the subject and a lot of experimentation. I eventually found the distortion can be reduced (or enhanced if you like being annoyed) by changing the menu values of AGC SLP. I have mine set at 6 and it makes the warble of the ANF (Automatic Notch Filter) - far less than the 12 default setting. Some of my other menu settings (for the arm chair copy user) can be found at: http://www.w2blc.net/K3.htm I am sure others can expound upon the whys and wherefores of the software anomaly that causes this annoyance. Suffice to say, invoking the ANF on my other rigs does not cause distortion on received signals. As always, your mileage may vary. Bill W2BLC K-Line __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Notch causes distortion on SSB RX
I suspect, as Bill has suggested, it is AGC related. Dick - KA5KKT _ hard to describe, it's like the audio is getting chopped up, not sure this would explain it, but it's kind of like the sound of someone gargling being overlayed over the signal audio. A combination of that and the sound of NR @ 5-1. if the band is very quiet and the signals strong it's very pronounced, if the band is noisy it's not as pronounced __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Notch causes distortion on SSB RX
Bill I have found if i am trying to remove Cw i can use manual notch set to the signal and it seems the distortion fades away. I gave up using both auto-notch and NR on the k3 Gary Vk1ZZ K3, KX3, KPA500-FT, KAT500-FT,P3. On 29/07/2014 11:06 AM, "Bill W2BLC" wrote: > Hello Sam in Ole Angelo, > > The distortion you are noticing is very real and has bothered me to no > end. It is discussed on a couple of websites, that I am sure the "experts" > will jump in and tell you all about. > > I did some research on the subject and a lot of experimentation. I > eventually found the distortion can be reduced (or enhanced if you like > being annoyed) by changing the menu values of AGC SLP. I have mine set at 6 > and it makes the warble of the ANF (Automatic Notch Filter) - far less than > the 12 default setting. Some of my other menu settings (for the arm chair > copy user) can be found at: http://www.w2blc.net/K3.htm > > I am sure others can expound upon the whys and wherefores of the software > anomaly that causes this annoyance. Suffice to say, invoking the ANF on my > other rigs does not cause distortion on received signals. > > As always, your mileage may vary. > > Bill W2BLC K-Line > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to vk1zzg...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Notch causes distortion on SSB RX
hard to describe, it's like the audio is getting chopped up, not sure this would explain it, but it's kind of like the sound of someone gargling being overlayed over the signal audio. A combination of that and the sound of NR @ 5-1. if the band is very quiet and the signals strong it's very pronounced, if the band is noisy it's not as pronounced On 7/28/2014 7:52 PM, Dick Dickinson wrote: What type of distortion are you hearing? Dick - KA5KKT == I am noticing a bit of distortion on SSB signals when I enable the AUTO Notch. Is there some setting I can change to eliminate the distorted sound I am hearing now? -- GB & 73 K5OAI Sam Morgan __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Notch causes distortion on SSB RX
Hello Sam in Ole Angelo, The distortion you are noticing is very real and has bothered me to no end. It is discussed on a couple of websites, that I am sure the "experts" will jump in and tell you all about. I did some research on the subject and a lot of experimentation. I eventually found the distortion can be reduced (or enhanced if you like being annoyed) by changing the menu values of AGC SLP. I have mine set at 6 and it makes the warble of the ANF (Automatic Notch Filter) - far less than the 12 default setting. Some of my other menu settings (for the arm chair copy user) can be found at: http://www.w2blc.net/K3.htm I am sure others can expound upon the whys and wherefores of the software anomaly that causes this annoyance. Suffice to say, invoking the ANF on my other rigs does not cause distortion on received signals. As always, your mileage may vary. Bill W2BLC K-Line __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Notch causes distortion on SSB RX
What type of distortion are you hearing? Dick - KA5KKT _ I am noticing a bit of distortion on SSB signals when I enable the AUTO Notch. Is there some setting I can change to eliminate the distorted sound I am hearing now? -- GB & 73 K5OAI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] TX Noise Data
On 7/28/2014 5:45 AM, N4OI - Ken wrote: Perhaps this is discussed somewhere in the thread, but I am surprised by the lack of Flex SDRs in the mix. I would have thought at least a few would be there for PR, if no other reason. PR? What's that? The K3 and KX3 are both SDRs with knobs. I'm guessing that you mean SDRs without knobs. My interest is primarily contesting, the subject was radios for contesting, and rigs like the Flex products have made little headway in the contesting community. I know of only two guys contesting with Flex radios . One is K6TU, and the other is K6XN, who bought K6TU's older SDR that is new model replaced. No, I don't remember which models were involved. However, several guys asked, so I've added all three SDRs that ARRL has tested to the plots. I've also corrected a labeling error on one of the plots, added a plot of phase noise for a 500 Hz bandwidth, and added some text. It's all still at k9yc.com/TXNoise.pdf I suspect that these plots will make it clear why contesters aren't thrilled with these radios. By all means, before you consider one of the Flex radios, be sure to study this work by Leif Asbrink, SM5BSZ. http://sm5bsz.com/dynrange/dubus313.pdf 73, Jim K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 Notch causes distortion on SSB RX
I am noticing a bit of distortion on SSB signals when I enable the AUTO Notch. Is there some setting I can change to eliminate the distorted sound I am hearing now? -- GB & 73 K5OAI Sam Morgan __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Commands
Hi there is none. You can adjust it up and down but there is no direct command to read it. 73s Tom Original message From: Fred Jensen Date: 28/07/2014 17:06 (GMT-05:00) To: Elecraft Reflector Subject: [Elecraft] K3 Commands I notice in the K3 Programmers manual that there is a TE command to GET/SET the Tx Eq, but I can't find an equivalent RE command [or whatever] for the Rx Eq. Am I missing something? 73, Fred K6DGW - Northern California Contest Club - CU in the 2014 Cal QSO Party 4-5 Oct 2014 - www.cqp.org __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to tom...@videotron.ca __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 birdies and ther LED brightness command
Chris, My guess is that you are hearing a low level digital noise (rather than birdies) coming from the MCU as it illuminates the LEDs. The fact that they disappear when you turn the LED brightness down leads me to that conclusion. 73, Don W3FPR On 7/28/2014 2:13 PM, Christian Gondard wrote: hello With the antenna disconnected, I have noticed some very weak "birdies" on most of the bands, with a 15 khz separation; most of them are below the noise band level with a connected antenna; I made the test in a remote place in the deep vcountryside in souith west of france, with a KX3 poxered by battery ; natural or artificial noise level is very low. but these birdies disapear completely when the LED BRIGHTNESS COMMAND is set to 1, and reapear when the command is set higher than 1. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 Commands
I notice in the K3 Programmers manual that there is a TE command to GET/SET the Tx Eq, but I can't find an equivalent RE command [or whatever] for the Rx Eq. Am I missing something? 73, Fred K6DGW - Northern California Contest Club - CU in the 2014 Cal QSO Party 4-5 Oct 2014 - www.cqp.org __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] WRTC 2014 - Congratulations, Elecraft!...(and firmware update)
On 7/28/2014 8:45 AM, N4OI - Ken wrote: Perhaps this is discussed somewhere in the thread, but I am surprised by the lack of Flex SDRs in the mix. I would have thought at least a few would be there for PR, if no other reason. __ There is an article that addresses the earlier Flex products, which shows the Flex 1500 and Flex 3000 to be... well... kinda punk in the noise department. http://sm5bsz.com/dynrange/dubus313.pdf No doubt it would be swell if all radios could be included, but I believe this is a HUGE time consuming job mining data by sifting through all those old reviews and selecting the correct data, and then even more time to plot them in a consistent manner. I am not sure there is data on all rigs of interest, and the newest Flex radios revealed at Dayton have yet to be reviewed, heck it takes 8 to 9 months for a new rig to get reviewed in QST magazine. It takes time to test, and issue content is lined up months in advance. I had a piece published in the Nov 2013 QST magazine, but it has been submitted 11 months earlier. K8JHR -- __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX3 birdies and ther LED brightness command
hello With the antenna disconnected, I have noticed some very weak "birdies" on most of the bands, with a 15 khz separation; most of them are below the noise band level with a connected antenna; I made the test in a remote place in the deep vcountryside in souith west of france, with a KX3 poxered by battery ; natural or artificial noise level is very low. but these birdies disapear completely when the LED BRIGHTNESS COMMAND is set to 1, and reapear when the command is set higher than 1. Has somebody else noticed the same bahaviour ? best regards es 73 chris / F6FTB --- Ce courrier électronique ne contient aucun virus ou logiciel malveillant parce que la protection avast! Antivirus est active. http://www.avast.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KX3 with CW skimmer - ghost image problem
Run this procedure: http://www.elecraft.com/manual/RX%20sideband%20null%20A8.pdf 73, Matt VK2RQ > On 27 Jul 2014, at 12:28 am, John Watkins wrote: > > All, > > Noticed this when using skimmer and reporting spots to the RBN. When I have > a strong station reported I will also spot a copy of that station weaker and > some 16 to 18 khz higher on the band. > > Is there a solution to eliminate the false weaker image? > > Thanks, John N0EVH > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to matt.vk...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] FS: K3/!00 with options
Looking at your 4 ads, you do not list any serial numbers; inquiring minds would like to know. 73 de Jim - KE8G Sent from my iPad > On Jul 28, 2014, at 10:36 AM, Doug Person via Elecraft > wrote: > > Selling my Elecraft K3/100. Excellent condition. Includes KXV3A, KAT3, > KFL3-A500, KFL3- A21K 2.1 filters. Also includes heavy-weight main tuning > knob and deluxe metal knobs on volume and RF gain. All firmware up to date. > Works perfectly. --- $2,500.00 --- Payment via PayPal - no fee. Shipped UPS > or USPS. Provide address for shipping costs. > > Thanks & 73, Doug -- K0DXV > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to k...@cox.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] WTB:KTS1 tilt stand for K1
Have one you don't use? Please reply off-list with condx and price, shipped to 03773. Thanks, Bruce/N1RX "mycall" aht arrl doht net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FS: KAT500
Selling my KAT500. Excellent condition. Includes cables & manual. $525 + shipping. Provide address for shipping costs. PayPal only - no fee. Thanks & 73, Doug -- K0DXV __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FS: P3
Selling my P3. Includes all cables + manual. Excellent condition. $600 + shipping. PayPal only. Provide your address for shipping costs. Thanks & 73, Doug -- K0DXV __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FS: KPA500
Selling my KPA500 amplifier. Works perfectly. Wired for 240v but easily changed. Minor scuff marks on top. $1900 + Shipping (provide address for shipping costs). Payment via PayPal only - no fee. Thanks & 73, Doug -- K0DXV __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FS: K3/!00 with options
Selling my Elecraft K3/100. Excellent condition. Includes KXV3A, KAT3, KFL3-A500, KFL3- A21K 2.1 filters. Also includes heavy-weight main tuning knob and deluxe metal knobs on volume and RF gain. All firmware up to date. Works perfectly. --- $2,500.00 --- Payment via PayPal - no fee. Shipped UPS or USPS. Provide address for shipping costs. Thanks & 73, Doug -- K0DXV __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] WRTC 2014 - Congratulations, Elecraft!...(and firmware update)
The West Valley Amateur Radio Association operating as K6EI and W6ZZZ (GotA) had a similar experience. We operated 6AB-QRP with CW, SSB and digital HF stations. We used K3s and KX3s exclusively. Our antennas were arranged in a line to minimize interference. We would often have CW, digital, and SSB on the same band. In operating the digital station, I never noticed the CW people. The only way I noticed the SSB people was by overhearing their sound waves from the tent next door. :-) 73 Bill AE6JV On 7/27/14 at 7:40 PM, k2av@gmail.com (Guy Olinger K2AV) wrote: This is something the North Carolina PVRC group that did field day together north of Raleigh already knew about K3's vs. the world from a pile of experiences. We had five or six K3's available to us, and we went purely with the K3's on HF in the 3A class. We had a little horizontal physical spread to help out, but we often had both CW and SSB on the same band at the same time due to the conditions, and one could not hear the co-band K3. - Bill Frantz| When it comes to the world | Periwinkle (408)356-8506 | around us, is there any choice | 16345 Englewood Ave www.pwpconsult.com | but to explore? - Lisa Randall | Los Gatos, CA 95032 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX3 with CW skimmer - ghost image problem
All, Noticed this when using skimmer and reporting spots to the RBN. When I have a strong station reported I will also spot a copy of that station weaker and some 16 to 18 khz higher on the band. Is there a solution to eliminate the false weaker image? Thanks, John N0EVH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] FS: K2/100
Forgot to include price for K2/100: asking $1050.00 shipped and insured. Thanks, Mike __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] WRTC 2014 - Congratulations, Elecraft!...(and firmware update)
Perhaps this is discussed somewhere in the thread, but I am surprised by the lack of Flex SDRs in the mix. I would have thought at least a few would be there for PR, if no other reason. 73 -- View this message in context: http://elecraft.365791.n2.nabble.com/WRTC-2014-Congratulations-Elecraft-tp7591534p7591693.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] CW using P3, help
Thank you. It was the VOX setting. 73 AC2EV - Don __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
