[Elecraft] K3 Help Macro Mic Input

[i5nph]

I am using firmware 05.57 and I am tryng to use the command MP to write macro
to switch Microphone from LINEIN and FPH.

But I get response MP?

This macro I know was working before.it is very important because I work
JT65 and I would like to switch the way of the audio input (LINEIN and FPH)
without be forced to go to Menu.

Hope in some help

Thanks in advance

73




--
View this message in context: 
http://elecraft.365791.n2.nabble.com/K3-Help-Macro-Mic-Input-tp7632057.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Need of an external sound card with the KX2

[MaverickNH]

I've seem some information about use of an "Easy Digi" device
http://www.ebay.com/itm/EASY-DIGI-UV-5R-INTERFACE-for-IPhone-IPad-IPod-Touch-/321221531105
and plan to give it a try. There are a few YouTube videos. It's on order.

Bret/N4SRN



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/Need-of-an-external-sound-card-with-the-KX2-tp7622936p7632058.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Macro to switch Microphone input

[i5nph]

I am using firmware 05.57 and I am tryng to use the command MP to write macro
to switch Microphone from LINEIN and FPH. 

But I get response MP? 

This macro I know was working before.it is very important because I work
JT65 and I would like to switch the way of the audio input (LINEIN and FPH)
without be forced to go to Menu. 

Hope in some help 

Thanks in advance 

73 



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/Macro-to-switch-Microphone-input-tp7632059.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Macro to switch Microphone input

[G4GNX]

AFAIK you can't use MP for the RP, FP controls.

You would need to select the MIC menu using MN053 then a series of DN and UP 
commands to move through the menu parameters.


MN053;DN;DN;MN255; will set Front Panel

MN053;DN;DN;UP;MN255; will set Rear Panel

MN053;DN;DN;UP;UP;MN255; will set Line In

73,

Alan. G4GNX

-Original Message- 
From: i5nph

Sent: Sunday, June 25, 2017 11:37 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Macro to switch Microphone input

I am using firmware 05.57 and I am tryng to use the command MP to write 
macro

to switch Microphone from LINEIN and FPH.

But I get response MP?

This macro I know was working before.it is very important because I work
JT65 and I would like to switch the way of the audio input (LINEIN and FPH)
without be forced to go to Menu.

Hope in some help

Thanks in advance

73

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Macro to switch Microphone input

[Richard Ferch]

Why not use DATA A mode for JT65? You can set the input for DATA A to LIN
IN while leaving the input for voice modes on FP.H. You can switch between
voice modes and JT65 just using the MODE button, with no need for macros or
menus.

73,
Rich VE3KI

I5NPH wrote:

...it is very important because I work JT65 and I would like to switch the
way of the audio input (LINEIN and FPH) without be forced to go to Menu.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] Macro to switch Microphone input

[i5nph]

Thanks VERY MUCH

73 and DX

Natale
i5nph



--
View this message in context: 
http://elecraft.365791.n2.nabble.com/Macro-to-switch-Microphone-input-tp7632059p7632062.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] missing power

[kotte]

Hi

I have a problem whit my K2

Normal power 0n 80 meter

5 watt on 40

0.2 watt on 30

2 watt on 20

7 watt on 17m

8 wat on 15 and 12 meter

9 watt on 10 meter

I rebuilt the bandpass filter and i am sure there are the right components
(band pass 30 and 20 meter)

I checked the low pass filter and that looks also alright 

Any body a suggestion?

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] K2 SN 2615, KSB2 Rev D. manual

[Vron Jones via Elecraft]

Hi!My K2 has no output on SSB. Works fine on CW.I need a PDF of the KSB2 Rev. 
D. manual.The current manual is Rev. G and assumes U3 is an SSB2166 that is 
surface mount with 14 pins.My U3 is an SSM2165, non-surface mount with 8 pins.
Where can I find a PDF of the older manual?Thanks.
Vron
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] XG50 temp comp for KX3

[Thorpe, Jeffrey]

One other question: at the very end of the extended procedure, it says (in 
bold) to kake sure I do the refcal procedure at room temperature as it says in 
the manual.
Am I supposed to do the refcal again? - after the extended procedure? Or is 
this just a note/reminder regarding the reference calibration that I do before 
the extended procedure?

Jeff - KG7HDZ

> On Jun 24, 2017, at 6:14 PM, Thorpe, Jeffrey  wrote:
> 
> Thanks Walter - Pretty much what I was thinking, but thought I would ask. 
> That only costs a couple electrons and a minute.
> 
> Jeff - KG7HDZ
> 
> On Jun 24, 2017, at 6:06 PM, Walter Underwood 
> mailto:wun...@wunderwood.org>> wrote:
> 
> Should not be a problem. Good ol’ RG-58 has 0.083 dB loss in three feet of 
> cable at 50 MHz. That is about 2% of the signal. Another 2% won’t matter.
> 
> wunder
> K6WRU
> Walter Underwood
> CM87wj
> http://observer.wunderwood.org/ (my blog)
> 
> On Jun 24, 2017, at 5:47 PM, Thorpe, Jeffrey 
> mailto:jtho...@liberty.edu>> wrote:
> 
> I am going to be doing the temperature compensation procedure for my KX3. The 
> sheet for the XG50 says I can use a 3' 50-ohm cable. This probably seems like 
> a silly question, but is it a big deal if I use a 6' cable? Is the signal so 
> weak I have to worry about that extra (???) loss?
> 
> J
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wun...@wunderwood.org
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jtho...@liberty.edu
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3 memory editor

[G4GNX]

The issue I was having with the Elecraft Frequency Memory Editor has now been 
resolved, thanks to a suggestion by Dick, K6KR.

Dick suggested using the Trace option to see if I could capture where the stall 
was taking place. When I went to turn the Trace option on, I realised that it 
was already on, so decided to firstly test the Editor with Trace turned off. 
Bingo! All works as expected with no stalling.

Having only just used the Editor for the first time, I did not realise that the 
Trace window is does not show in normal operation. The Editor still stalls with 
Trace on, but this may be normal. I’m not aware whether Trace is on by default 
when the program is installed, probably not, but it got turned on somehow!

I hope my experience will provide a fix for others who have experienced a 
similar ‘issue’.

Once again, this proves that the choice of Elecraft is the best there can be. 
Where else do you get a direct reply from the author of the software within 
hours?

Thanks Dick for taking time out of your busy schedule. I know you didn’t 
actually have to fix anything, but if you’d not made the suggestion about using 
Trace, it may have taken me many hours to find the problem.

73,

Alan. G4GNX
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] missing power

[Don Wilhelm]

I can offer no real suggestion with that sketchy data - other than ti 
say "it is not working right:>).


To obtain more information about where it is failing, I suggest you turn 
the manual to Appendix E and do the Transmit Signal Tracing steps 
indicated there.  You will need an RF Probe or a 'scope with the 10X 
probe.  The expected values listed are for an RF probe.  If you are 
using a 'scope, multiply those values by 3 to obtain the approximate 
peak to peak RF voltage indicated on a 'scope.


What you are looking for is the first stage where the RF voltage is 
substantially less than the expected values.  That is the output of the 
stage that is giving trouble.


Since you have the lowest output on 30 meters, I suggest you use that 
band instead of 40 meters.


Be certain to connect a dummy load on the K2.  Do not use an antenna.

73,
Don W3FPR

On 6/25/2017 12:01 PM, kotte wrote:

Hi

I have a problem whit my K2

Normal power 0n 80 meter

5 watt on 40

0.2 watt on 30

2 watt on 20

7 watt on 17m

8 wat on 15 and 12 meter

9 watt on 10 meter

I rebuilt the bandpass filter and i am sure there are the right components
(band pass 30 and 20 meter)

I checked the low pass filter and that looks also alright

Any body a suggestion?

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to donw...@embarqmail.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K2 SN 2615, KSB2 Rev D. manual

[Don Wilhelm]

Vron,

I will send you a copy off-list.

73,
Don W3FPR

On 6/25/2017 1:44 PM, Vron Jones via Elecraft wrote:

Hi!My K2 has no output on SSB. Works fine on CW.I need a PDF of the KSB2 Rev. 
D. manual.The current manual is Rev. G and assumes U3 is an SSB2166 that is 
surface mount with 14 pins.My U3 is an SSM2165, non-surface mount with 8 pins.
Where can I find a PDF of the older manual?Thanks.

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] XG50 temp comp for KX3

[Don Wilhelm]

Jeff,

Yes, do it both at the beginning and end.  At the end, make certain your 
KX3 has fully acclimated to room temperature - I suggest at least an hour.


73,
Don W3FPR

On 6/25/2017 2:03 PM, Thorpe, Jeffrey wrote:

One other question: at the very end of the extended procedure, it says (in 
bold) to kake sure I do the refcal procedure at room temperature as it says in 
the manual.
Am I supposed to do the refcal again? - after the extended procedure? Or is 
this just a note/reminder regarding the reference calibration that I do before 
the extended procedure?


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] Items for sale from SK op

[David Christ]

This appeared on the Eastern Iowa DX Association reflector.  Some of the items 
may be of interest to people on this list.  this is only a partial list of 
items.

David K0LUM


A longtime Honorary Life member of EIDXA, Lew Gordon K4VX  of Hannibal, MO 
became a silent key in February, 2017.   Below is a list of some of his items 
and equipment which are for sale.  Anyone interested should contact Danny 
Pease, NG9R -- n...@ng9r.com   217-430-2046.  Thanks.
 
Cliff KØCA 
 
= = = = = = = = = = = = = = = = = = = = = = = = = = = = =
 
K4VX (SK) Items For Sale
 
Due to the circumstances, all items listed are being sold as is. Many items are 
known to have been used recently, other items were known to have been working 
when last used but may have sat unused for a few years. Some items nothing is 
known at all. Some very limited testing may be done on a case by case basis. 
Send all inquiries to Danny Pease, n...@ng9r.com  
217-430-2046
 
Elecraft K3S w/2.8 and 400 Hz filters, less than 2 years old, recently used   
$2500
OM Power 2000+  160 – 6 meter amplifier, less than 3 years old, recently used   
 $2500
Elecraft K2, currently configured as a 10 watt unit with optional battery pack, 
KAT2 internal tuner, K160RX 160 meter option, KNB2 noise blanker, K2SB SSB 
option, 60 meter and transverter interface, KIO2 serial port. Included will be 
the KPA-100 100 watt PA assembly. Everything worked when last used. This radio 
was built and tested by Tom Hammonds, NØSS (SK).   $800
Elecraft XV-50 six meter transverter, worked when last used   $200

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KX2 and Omnirig ...

[Bob Wilson, N6TV]

According to the Elecraft Programmer's Reference
,
"The KX3 and KX2 accept all K3
commands, though some have no functional effect on the KX3/KX2 (*)".

So, in OmniRig, select radio type Elecraft K3, and everything supported by
OmniRig should work fine on the KX3.

Try the free OmniRig client 
to test all the supported functions. See also the OmniRig Tester's Guide
.

73,
Bob, N6TV

On Fri, Jun 23, 2017 at 9:11 AM, john mcleod  wrote:

> Has anybody had any experience with coming up with an omnirig ini file for
> the KX2 ? Failing that, any pointers to how to come up with a new file ?
> I've read the Afreet readme files, but am still no wiser as to how to go
> about this.
>
> Thanks !!
>
> John  N6RCD
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@arrl.net
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KX2 and Omnirig ...

[john mcleod]

Hey, great, thanks for the tip Bob. The K3 setting works perfectly well for
my needs. Thanks again !!!

John  N6RCD


On Sun, Jun 25, 2017 at 5:07 PM, Bob Wilson, N6TV  wrote:

> According to the Elecraft Programmer's Reference
> ,
> "The KX3 and KX2 accept all K3
> commands, though some have no functional effect on the KX3/KX2 (*)".
>
> So, in OmniRig, select radio type Elecraft K3, and everything supported by
> OmniRig should work fine on the KX3.
>
> Try the free OmniRig client 
> to test all the supported functions. See also the OmniRig Tester's Guide
> .
>
> 73,
> Bob, N6TV
>
> On Fri, Jun 23, 2017 at 9:11 AM, john mcleod  wrote:
>
>> Has anybody had any experience with coming up with an omnirig ini file for
>> the KX2 ? Failing that, any pointers to how to come up with a new file ?
>> I've read the Afreet readme files, but am still no wiser as to how to go
>> about this.
>>
>> Thanks !!
>>
>> John  N6RCD
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to n...@arrl.net
>>
>
>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com