[Elecraft] FS KPA500

[Steve Lawrence via Elecraft]

The KAT500 has been sold.

The KPA500 is still available.

https://www.eham.net/classifieds/detail/566451 


73 - Steve WB6RSE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] FS: K3/P3 Second round

[Mike Murray]

RemoteRigs and K3/0 mini are sold.  Check out the following and make me an
offer:

*Original*
$2,149.95  K3/100-F1 K3 100W Xcvr. (Factory assembled) Serial #3746
 329.95  KAT3-F   1 K3 ATU
 109.95  KXV3A1 K3 RX Ant, IF Out & Xvrtr Int
 649.95  KRX3  1 K3 2nd RX
 125.95 KFL3A-400   1 K3 400 Hz, 8 pole filter  (Main RX)
 259.90 KFL3A-2.8K  2 K3 2.8 kHz, 8 pole filter (Main/Sub RX)
749.95  P3-F K3 Panadapter (Factory assembled)
   * 129.95*  "Y-Box" by N6TV  15 pin parallel DE15 splitter and
breakout box
$4,505.55

Complete price for all of the above is $2,4000.00 and I'll deliver within
150 miles of Crossville, TN.  I can also ship, postage and insurance extra.
w0ag at arrl.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KIO3B usb com port not communicating

[Jack Brindle via Elecraft]

Do you have BOTH plugs connected to the P3? You need to use the cable that has 
not one, but two DE-9 connectors - this allows the data to flow from the USB 
interface through the P3 and then back to the K3S. Without it, I would expect 
exactly the behavior you describe. In fact, I experienced exactly the behavior, 
which is why I know.

Be sure to use the double DE9 cable, not the one with just a single DE9. 

73!
Jack, W6FB

> On Jul 19, 2019, at 11:32 AM, Rajiv Dewan  wrote:
> 
> Hello all, especially Don,
> 
> The last tip helped make progress.  I unplugged the P3 connected via the RJ45 
> jack and suddenly my USB/CAT came back to life.
> 
>  And, this disruption is repeatable.  Plug the P3 back and again it stops 
> working.  Unplug, works again.
> 
>  Now, I will look to see what is up with the P3.  I checked the firmware on 
> the P3.  It is running the latest.
> 
>  Raj
> 
> --
> Raj Dewan, N2RD
> rdew...@rochester.rr.com
> 
> -- Original Message --
> From: "Don Wilhelm" 
> To: "Rajiv Dewan" 
> Sent: 7/19/2019 1:32:38 PM
> Subject: Re: [Elecraft] KIO3B usb com port not communicating
> 
>> Raj,
>> 
>> Email supp...@elecraft.com
>> 
>> 73,
>> Don W3FPR
>> 
>> On 7/18/2019 10:03 AM, Rajiv Dewan wrote:
>>> Hello,
>>> 
>>>   I have KIO3B (USB interface) in my K3.  It was working well. Single USB 
>>> for audio, and CAT.
>>> 
>>> Suddenly, now the CAT part is not working.  Here are some aspects:
>>> * RS232 in K3/Config shows USB
>>> * Serial port 1 shows up in device manager on the windows computer when the 
>>> USB is plugged in.  The sound codecs are working.
>>> * Nothing communicates with the K3 CAT any more (K3 utility, and logging 
>>> programs do not see the K3 on the com1.)
>>> * I tried it on a new laptop with a fresh USB cable.  Exactly the same 
>>> issue.
>>> 
>>> Any help appreciated.
>>> 
>>> Raj, N2RD
>>> K3 sn 170
>>> 
>>> -- Raj Dewan, N2RD
>>> rdew...@rochester.rr.com
>>> __
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft@mailman.qth.net
>>> 
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>> Message delivered to donw...@embarqmail.com
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jackbrin...@me.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KIO3B usb com port not communicating

[RALPH TURK]

Raj
Check the RJ45 jack very carefully.  One of the wires might have bent slightly
and shorts out the adjacent wire.  I have found that a few times when repairing
computer problems for friend & family
Ralph, W7HSG/AFA9RT 


> On July 19, 2019 at 12:32 PM Rajiv Dewan  wrote:
> 
> 
> Hello all, especially Don,
> 
>   The last tip helped make progress.  I unplugged the P3 connected via 
> the RJ45 jack and suddenly my USB/CAT came back to life.
> 
>And, this disruption is repeatable.  Plug the P3 back and again it 
> stops working.  Unplug, works again.
> 
>Now, I will look to see what is up with the P3.  I checked the 
> firmware on the P3.  It is running the latest.
> 
>Raj
> 
> --
> Raj Dewan, N2RD
> rdew...@rochester.rr.com
> 
> -- Original Message --
> From: "Don Wilhelm" 
> To: "Rajiv Dewan" 
> Sent: 7/19/2019 1:32:38 PM
> Subject: Re: [Elecraft] KIO3B usb com port not communicating
> 
> >Raj,
> >
> >Email supp...@elecraft.com
> >
> >73,
> >Don W3FPR
> >
> >On 7/18/2019 10:03 AM, Rajiv Dewan wrote:
> >>Hello,
> >>
> >>I have KIO3B (USB interface) in my K3.  It was working well. Single USB 
> >> for audio, and CAT.
> >>
> >>Suddenly, now the CAT part is not working.  Here are some aspects:
> >>* RS232 in K3/Config shows USB
> >>* Serial port 1 shows up in device manager on the windows computer when the 
> >>USB is plugged in.  The sound codecs are working.
> >>* Nothing communicates with the K3 CAT any more (K3 utility, and logging 
> >>programs do not see the K3 on the com1.)
> >>* I tried it on a new laptop with a fresh USB cable.  Exactly the same 
> >>issue.
> >>
> >>Any help appreciated.
> >>
> >>Raj, N2RD
> >>K3 sn 170
> >>
> >>-- Raj Dewan, N2RD
> >>rdew...@rochester.rr.com
> >>__
> >>Elecraft mailing list
> >>Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >>Help: http://mailman.qth.net/mmfaq.htm
> >>Post: mailto:Elecraft@mailman.qth.net
> >>
> >>This list hosted by: http://www.qsl.net
> >>Please help support this email list: http://www.qsl.net/donate.html
> >>Message delivered to donw...@embarqmail.com
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w7...@comcast.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] KX2/AX1 WSPR vs FT8

[MaverickNH]

I'm running my KX2 on 5W with a AX1 vertical loaded whip on 20m with two
counterpoise cut for 1/4 wave. I'm able to RX/TX WSPR with my spots heard in
minus single digits - some positive single digits. I'm also able to RX FT8
but unable to QSO - nobody apparently hears me on HamSpots.

It seems I have my answer but was hoping that if I could get my signal
spotted on WSPR I should get *some* spots on FT8. Perhaps FT8 has gone well
out of low power and I'm in the weeds. That and I'm using vertical
polarization with most horizontal. I'll add I'm operating inside hotel rooms
while traveling but I figured walls stop WSPR and FT8 equivalently, but the
2min vs 15sec cycle times come into play as well.

Bret/N4SRN



--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KIO3B usb com port not communicating

[Don Wilhelm]

Raj,

Don't overlook the possibility that the RJ-45 jack could be damaged.
If you have ever accidently plugged the USB cable into that jack - it 
almost fits, but will damage the RJ-45 jack.


73,
Don W3FPR

On 7/19/2019 2:32 PM, Rajiv Dewan wrote:

Hello all, especially Don,

 The last tip helped make progress.  I unplugged the P3 connected via 
the RJ45 jack and suddenly my USB/CAT came back to life.


  And, this disruption is repeatable.  Plug the P3 back and again it 
stops working.  Unplug, works again.


  Now, I will look to see what is up with the P3.  I checked the 
firmware on the P3.  It is running the latest.




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] KIO3B usb com port not communicating

[Rajiv Dewan]

Hello all, especially Don,

 The last tip helped make progress.  I unplugged the P3 connected via 
the RJ45 jack and suddenly my USB/CAT came back to life.


  And, this disruption is repeatable.  Plug the P3 back and again it 
stops working.  Unplug, works again.


  Now, I will look to see what is up with the P3.  I checked the 
firmware on the P3.  It is running the latest.


  Raj

--
Raj Dewan, N2RD
rdew...@rochester.rr.com

-- Original Message --
From: "Don Wilhelm" 
To: "Rajiv Dewan" 
Sent: 7/19/2019 1:32:38 PM
Subject: Re: [Elecraft] KIO3B usb com port not communicating


Raj,

Email supp...@elecraft.com

73,
Don W3FPR

On 7/18/2019 10:03 AM, Rajiv Dewan wrote:

Hello,

   I have KIO3B (USB interface) in my K3.  It was working well. Single USB for 
audio, and CAT.

Suddenly, now the CAT part is not working.  Here are some aspects:
* RS232 in K3/Config shows USB
* Serial port 1 shows up in device manager on the windows computer when the USB 
is plugged in.  The sound codecs are working.
* Nothing communicates with the K3 CAT any more (K3 utility, and logging 
programs do not see the K3 on the com1.)
* I tried it on a new laptop with a fresh USB cable.  Exactly the same issue.

Any help appreciated.

Raj, N2RD
K3 sn 170

-- Raj Dewan, N2RD
rdew...@rochester.rr.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to donw...@embarqmail.com


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K3S AGC action in CW

[Roger]

Alright I understand. J

 

By browsing the firmware archive I found a pretty old firmware version 
announcing an the implementation of an independent AGC system whenever “CW 
Decode“ is enabled. I enabled this function a while ago to see how good it is 
compared to human ears and brain and being lazy I let it enabled. So if you 
enable CW Decode the AGC will be locked to what is “slow” (with the default 
values). Disabling CW Decode the radio returns to the regular AGC system and 
works as in all other modes.

 

Hope this helps someone else now or in the future……..

 

73, Roger, DL5RBW

 

From: Dave Sublette [mailto:k4to.d...@gmail.com] 
Sent: Friday, July 19, 2019 6:52 PM
To: Roger
Subject: Re: [Elecraft] K3S AGC action in CW

 

No,no. You can't get off that easy. You must tell why the problem occurred and 
how it was solved.  😀

 

Dave K4TO 

 

On Fri, Jul 19, 2019, 12:47 PM Roger  wrote:

Please ignore - problem solved!

73/Roger - DL5RBW




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k...@arrl.net 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] Question on value of K3/100, P3, KRX3, KSYN3A and other items possibly for sale

[Scott Manthe]

Due to lack of use and some unexpected expenses this summer, I'm 
considering selling my K3 (SN3019), an unbuilt P3 kit, KRX3 and a set of 
KSYN3As and a PR6-10 preamp. I'm having some trouble setting a value on 
these items. If anyone ca offer some guidance, I'd really appreciate it!


The K3/100, SN3019, is unmodded and includes the following, in excellent 
condition:


     KAT3
     KBPF3
     KXV3
     KIO3
     KNB3
     MH2
     KFL3A-6K
     KFL3A-2.7K
     KFL3A-500
     KFL3A-200

The K3 also has an extra set of stainless screws.

Unbuilt P3 kit, new in the box. Completely stock, as new, just opened 
the box to take a look at the kit.


KRX3 sub-receiver. Bought this used to install in the K3, but never got 
around to ding it. Comes with the 8-pole, 2.8 Khz filter.


Set of 2 KSYN3A synthesizers. Again, bought these to install in the K3 
and KRX3, but never got around to doing it.


PR6-10 preamp. Used for a couple of months. Works great.

KFL3B-FM FM filter

KFL3A-2.7 standard 5 pole filter

Thanks and 73,

Scott N9AA


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K3S AGC action in CW

[Frank Krozel]

How was it resolved?
Frank

> On Jul 19, 2019, at 11:46 AM, Roger  wrote:
> 
> Please ignore - problem solved!
> 
> 73/Roger - DL5RBW
> 
> 
> 
> 
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to kg9hfr...@gmail.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K3S AGC action in CW

[Roger]

Please ignore - problem solved!

73/Roger - DL5RBW




__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K3S AGC action in CW

[Roger]

That was the first thing I did (including reading and rereading the manual) 
however changing the settings didn´t affect the AGC action in CW. The AGC 
settings are identical in all modes (default) therefore I would expect 
identical behavior in all modes. And in fact it does EXCEPT for CW. No matter 
whether AGC is set to fast or slow in CW it stays slow. 

73/Roger - DL5RBW

-Original Message-
From: Ken K3IU [mailto:kenk...@cox.net] 
Sent: Friday, July 19, 2019 12:34 PM
To: Roger; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3S AGC action in CW

There are numerous AGC adjustments available in the CONFIG menu. You can 
probably find something to suit you there.
73, Ken K3IU


On 7/19/2019 4:14 AM, Roger wrote:
> Hi,
>
> when operating the K3S in CW mode I found there is no difference in 
> switching between AGC-F(ast) and AGC-S(slow). It seems the "default" 
> setting is on slow and does not go to fast (compared to the decay 
> characteristic in SSB).
> The manual explains that the AGC Fast/Slow response should also be 
> effective in CW.
>
> Can anyone confirm this behavior (or not)?
>
> Firmware version is 5.66 (actually supposed to be 5.67 with the 
> "label" of the previous version).
>
> 73/Roger - DL5RBW
>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to 
> kenk...@cox.net
>

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] MFJ 1234

[A Kiddoo]

John-

Been there done that with RigPi. This thing is a “glitter turd”. RigPi gives 
you variable remote control of VFO. Period. All other radio control is via 
on/off buttons. Want to change your bandpass, IF shift, RF gain, etc? Nope. 
Only on/off buttons that you have to program via hamlib commands. Then there is 
the all the issues setting up Mumble for audio transport. I had two beta 
testers contact me privately admitting that RigPi was released too soon. MFJ 
claims “Easy as 1-2-3.” -  1. Turn on 2. Config 3. Goto 1.
I sold mine for a $75 loss and told the buyer what to expect. His problem now. 
If you could get Mumble or a similar program to work for audio transport, you 
would be $300 ahead to setup Rpi with VNC and install Flrig (which has variable 
controls) and any other software you want to use. RigPi tells you to use VNC 
for digital modes anyway - so why buy it?
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K1 Filter Board

[Andrew Herbaugh]

I am in search of a 2 band or 4 band filter board for a K1.  Any help would be 
appreciated, you may contact me by e-mail at aaherb...@hotmail.com.

Andy
NR8N
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K3S AGC action in CW

[Ken K3IU]

There are numerous AGC adjustments available in the CONFIG 
menu. You can probably find something to suit you there.

73, Ken K3IU


On 7/19/2019 4:14 AM, Roger wrote:

Hi,

when operating the K3S in CW mode I found there is no difference in
switching between AGC-F(ast) and AGC-S(slow). It seems the "default" setting
is on slow and does not go to fast (compared to the decay characteristic in
SSB).
The manual explains that the AGC Fast/Slow response should also be effective
in CW.

Can anyone confirm this behavior (or not)?

Firmware version is 5.66 (actually supposed to be 5.67 with the "label" of
the previous version).

73/Roger - DL5RBW


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to kenk...@cox.net



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K3s configuration question

[Nr4c]

As to using KPA500 at 100 Watts, this is now legal. Up to a few years ago, 
rules said you could “not use an amp capable of more than 100Watts”. This 
actually disallowed several radios capable of 110W or 200 W. 

Sent from my iPhone
...nr4c. bill


> On Jul 18, 2019, at 10:51 PM, Mike Dodd  wrote:
> 
> When operating RTTY contests like NAQP, I like to run my KPA500 at 100W, vs. 
> running the K3s at full power. Reason: both the K3 and the KPA run their 
> final amps cooler.
> 
> Usually I have my K3s configured for 100W when the KPA500 is off on on 
> Standby, and configured to drive the KPA at 500W when it's operating.
> 
> But If I turn on the KPA and want to run it at 100W, I have to lower the K3's 
> drive power, then increase it after the contest.
> 
> QUESTION: Does the configuration saved by the K3 utility include per-band 
> power settings for the K3 only AND the K3 plus the KPA?
> 
> If so, can I then save a "normal" configuration, then lower the K3 drive and 
> save a "100W KPA output" configuration? If I later restored one of these 
> configurations, would the K3s return to those per-band power settings?
> 
> Thanks for any information on this.
> 
> -- 
> 73, Mike N4CF
> Louisa County, VA USA
> Elecraft K-Line: K3s / P3 / KPA500 / KAT500
> Carolina Windom up 45'
> http://n4cf.mdodd.com
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n...@widomaker.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

Re: [Elecraft] K3S AGC action in CW

[Roy]

Roger,


My K3s AGC works as expected -- goodluck.

73,   Roy   K6XK




Hi,

when operating the K3S in CW mode I found there is no difference in
switching between AGC-F(ast) and AGC-S(slow). It seems the "default" setting
is on slow and does not go to fast (compared to the decay characteristic in
SSB).
The manual explains that the AGC Fast/Slow response should also be effective
in CW.

Can anyone confirm this behavior (or not)?

Firmware version is 5.66 (actually supposed to be 5.67 with the "label" of
the previous version).

73/Roger - DL5RBW


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k...@ncn.net


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com 

[Elecraft] K3S AGC action in CW

[Roger]

Hi,

when operating the K3S in CW mode I found there is no difference in
switching between AGC-F(ast) and AGC-S(slow). It seems the "default" setting
is on slow and does not go to fast (compared to the decay characteristic in
SSB). 
The manual explains that the AGC Fast/Slow response should also be effective
in CW.

Can anyone confirm this behavior (or not)?

Firmware version is 5.66 (actually supposed to be 5.67 with the "label" of
the previous version).

73/Roger - DL5RBW


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com