Re: [Elecraft] KAT 500 and the Yaesu FTDX10

2022-05-05 Thread David Gilbert 


Your indignation is completely misplaced.  Read the thread title. He's 
trying to interface to a KAT500, and last I checked Elecraft makes those.


Dave   AB7E




On 5/5/2022 2:16 PM, Ray wrote:

Did Elecraft  make a FTdx Series of Radio Equipment ???
I Must have missed it.  Did I sign in to the Wrong thread………..

Ray WA6VAB  Elecraft K3


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] [KAT500] Mac KAT500 Utility Software Issue

2022-05-05 Thread Scott Ririe via Elecraft 
I’m a relatively new owner of a new KAT500 and KPA500 Power Combo. I’m also an 
Apple Mac user. When changing bands, the amp has been faulting. I then re-tune, 
put amp back in ‘Oper’ mode and I’m good until I change bands again. I reached 
out to support and they had me check the ‘Amp Key Interrupt Pwr’ setting on the 
tuner via the KAT500 Utility Software. It appears to have been set to ‘1’ 
instead of ‘Optimize the KPA500’ @ 1500 watts. The interesting thing is that 
every time I click ‘Optimize the KPA500’ button, do an ‘apply’ and then ‘ok’, 
and when I come back into that menu it was always reset to back to ‘1’. Very 
odd!

I decided to install the Windows version of the KAT500 Utility Software on 
another computer. When using the windows version, the ‘Optimize the KPA500’ 
setting sticks and no more faults on the amp when I change bands. It looks like 
there may be a defect in the Mac version of the KAT500 utility.

Any of you Mac users with a KAT500/KPA500 had this problem when using the Mac 
version of the KAT500 utility?

Thanks,

Scott
WA7L

——— 
Scott Ririe
sri...@yahoo.com
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] K3S Antenna Selection

2022-05-05 Thread David Olean 
A few years ago, someone had supplied PC boards  to the Elecraft 
reflector, that would replace the KANT3 and provide for two antennas. I 
got one and it works great.


I wish I had more of them!  As far as I know they are no longer 
available. It was a one time thing.


Dave K1WHS

On 5/4/2022 11:10 PM, Keith Onishi wrote:

Hello John,

Tha is not possible. ANT2 connecter and antenna switching function are provided 
with KAT3 ATU.

I have 3 antenna feed lines. To switch the antennas according to K3 band 
selection, I use KAT500 ATU which has 3 SO-239m connecters. Of course my K3 
does not have KAT3 option.

73 de JH3SIF, Keith



2022/05/05 9:33、John Stengrevics のメール:

I have a K3S without antenna tuner.  Is there any way to enable ANT2  to use a 
different antenna than ANT1?  For example, I have a 6 meter antenna connected 
to ANT1 and would like to use ANT2 for a 10 meter antenna.  From what I am 
reading in the manual and Cady’s book, this doesn’t seem possible.

Thanks.

John
WA1EAZ


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to jh3...@sumaq.jp

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k1...@metrocast.net

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KAT 500 and the Yaesu FTDX10

2022-05-05 Thread Wes 
Come on Ray.  This is an Elecraft forum.  The man has Elecraft equipment.  
What's the beef?


Wes  N7WS

On 5/5/2022 2:16 PM, Ray wrote:

Did Elecraft  make a FTdx Series of Radio Equipment ???
I Must have missed it.  Did I sign in to the Wrong thread………..

Ray WA6VAB  Elecraft K3


From: Joe Subich, W4TV
Sent: Thursday, May 5, 2022 12:39 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KAT 500 and the Yaesu FTDX10


To which connector did your KAT500/FTdx1200 tuner cable attach?

The Tuner jacks are the same on both FTdx1200 and FTdx10 as are
the "Linear" jacks.


73,

 ... Joe, W4TV


On 2022-05-05 3:17 PM, Greg Chartrand via Elecraft wrote:

I just purchased a ftdx10 and wondered if the band data cable is the same as 
the one I had with my old ftdx1200.
Thanks,W7MY-Greg ChartrandRichland, WA.


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to wa6...@gmail.com

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to wes_n...@triconet.org


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] I need some guidance - KAT500

2022-05-05 Thread Andy Durbin 
One thing that you may not understand is that MAN with BYP active is the same 
electrically as BYP mode).

I use all 3 ANT ports of my KAT500 and never used any KAT mode except MAN. Some 
of my antennas work fine in MAN/Byp and others require some help with L and/or 
C.  All antenna switching is automatic with a seamless re-configuration as 
required for any band swap.

Each memorized tuning solution (6 possible per frequency bin) includes the 
Bypass relay configuration (BYPB or BYPN).

e.g.:

dm;
DM BN06;BIN 54;FR 18080-18099;ADDR 42040;
AN1;BYPB;VSWRB 1.00;
AN1;BYPN;SIDEA;C03;L04;VSWRB 1.23;
AN1;BYPN;SIDEA;C04;L04;VSWRB 1.29;
AN1;BYPN;SIDEA;C10;L08;VSWRB 5.15;
AN3;BYPB;VSWRB 1.00;
AN3;BYPN;SIDET;C00;L21;VSWRB 1.00;

Andy, k3wyc


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KAT 500 and the Yaesu FTDX10

2022-05-05 Thread Julia Tuttle 
No, but Elecraft makes the KAT500, and Greg is using a KAT500 with their
FT-DX10.

On Thu, May 5, 2022, 17:16 Ray  wrote:

> Did Elecraft  make a FTdx Series of Radio Equipment ???
> I Must have missed it.  Did I sign in to the Wrong thread………..
>
> Ray WA6VAB  Elecraft K3
>
>
> From: Joe Subich, W4TV
> Sent: Thursday, May 5, 2022 12:39 PM
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] KAT 500 and the Yaesu FTDX10
>
>
> To which connector did your KAT500/FTdx1200 tuner cable attach?
>
> The Tuner jacks are the same on both FTdx1200 and FTdx10 as are
> the "Linear" jacks.
>
>
> 73,
>
> ... Joe, W4TV
>
>
> On 2022-05-05 3:17 PM, Greg Chartrand via Elecraft wrote:
> > I just purchased a ftdx10 and wondered if the band data cable is the
> same as the one I had with my old ftdx1200.
> > Thanks,W7MY-Greg ChartrandRichland, WA.
>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wa6...@gmail.com
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to ju...@juliatuttle.net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KAT 500 and the Yaesu FTDX10

2022-05-05 Thread Ray 
Did Elecraft  make a FTdx Series of Radio Equipment ???
I Must have missed it.  Did I sign in to the Wrong thread……….. 

Ray WA6VAB  Elecraft K3  


From: Joe Subich, W4TV
Sent: Thursday, May 5, 2022 12:39 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KAT 500 and the Yaesu FTDX10


To which connector did your KAT500/FTdx1200 tuner cable attach?

The Tuner jacks are the same on both FTdx1200 and FTdx10 as are
the "Linear" jacks.


73,

... Joe, W4TV


On 2022-05-05 3:17 PM, Greg Chartrand via Elecraft wrote:
> I just purchased a ftdx10 and wondered if the band data cable is the same as 
> the one I had with my old ftdx1200.
> Thanks,W7MY-Greg ChartrandRichland, WA.


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to wa6...@gmail.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KX3 Option Advice Wanted

2022-05-05 Thread Keith Onishi 
When I got my KX3, I positioned it as outdoor use. The options I got at the 
moment were KXFL3, KXAT3, KXBC3 and MH3.
When I got K3 as my main TRX, I repositioned the KX3 as both a back up TRX to  
K3 inside shack and the outdoor use. So, I got KXPA100.
Later, I added KXPD3 for easy CW operation on outdoor use.

If you plan to operate KX3 outdoor with random wire antenna, I would suggest to 
get an adaptor BNC plug to double bind post.

73 de JH3SIF, Keith

> 2022/05/03 1:28、Glen Reid のメール:
> 
> I am contemplating the purchase of a KX3.  Looking for input from users on
> which options I should consider.
> Thanks es 73
> gr
> K5FX
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jh3...@sumaq.jp 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] I need some guidance - KAT500

2022-05-05 Thread Bob McGraw 
Your request can be attained by use of the KAT500 Utility to configure 
each antenna or antenna port per band as needed.


I use Ant 1 and Ant 2 for my wire antennas, 160M - 10M and Ant 3 for my 
6M yagi in bypass mode.  After setting up the KAT500 via the Utility, 
and training the KAT500 for the antennas and frequencies, then when I go 
to 6M the KAT500 goes automatically to BYPASS mode.    The other bands 
are selected for "last used" by the Utility.


73

Bob, K4TAX

On 5/5/2022 1:49 PM, elecraft-requ...@mailman.qth.net wrote:

Message: 21
Date: Thu, 5 May 2022 07:45:40 -0700
From: "Mike Flowers"
To:,
Subject: [Elecraft] I need some guidance - KAT500
Message-ID:<004301d8608e$cafe8510$60fb8f30$@gmail.com>
Content-Type: text/plain;   charset="us-ascii"

Hello Elecrafters,

  


I am running a K3-based K-Line: K3-P3-KAT500-KPS500.

  


Currently, I have two antennas connected to my KAT500: ANT 1 is my SteppIR
40/30 3L, and ANT 3 is my 160M/80M dipole.

  


When I have my K3 select 40M/20M/17M/15M/12M/10M/6M, my KAT500 is in BYP
mode and ANT 1 as expected.

  


On 30M, my SteppIR requires some matching and I have trained the KAT500 to
match the SteppIR on 30M.  This works fine if I remember to switch the
KAT500 to MAN before transmitting on 30M.

  


On 160M and 80M, the KAT500 selects the ANT 3 correctly, but stays in BYP
mode and I must switch the KAT500 to MAN to use the KAT500 matching
parameters.

  


I've been operating this way for 10 years and I'm quite use to these
methods.

  


However, it has occurred to me that there may be a way of configuring the
KAT500 so that:

  


*   When I have the K3 select 30M, the KAT500 selects MAN mode ANT 1,
and then if 40M/20M/17M/15M/12M/10M/6M is selected, the KAT500 would return
to BYP mode on ANT1.

  


*   When I have the K3 select 160m or 80M, the KAT500 would select MAN
mode ANT 3, and then if 40M/20M/17M/15M/12M/10M/6M is selected, the KAT500
would return to BYP mode ANT1.

  


It appears to me that once my KAT500 is in BYP mode, it remains in BYP mode
for whichever band/ANT is selected until changed by the MODE button, and
once in MAN mode, it remains in that mode until manually changed.

  


I've worked with the KAT500 Utility to try to achieve this more automatic
switching of antennas and KAT500 modes by band but have not yet succeeded.
I've read through the manual, but I cannot find what I need to accomplish
this.

  


Your guidance would be most appreciated.  Thanks!

  


- 73 and good DX de Mike,  K6MKF, NCDXC
   Vice-President 2021-2022 - In pursuit of
DXCELLENCE!

  

  




--
IF ONE EXPECTS COMPUTERS AND TECHNOLOGY TO SOLVE THEIR PROBLEMS,
ONE DOESN'T UNDERSTAND COMPUTERS AND TECHNOLOGY
AND ONE DOESN'T UNDERSTAND THEIR PROBLEMS."


__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KAT 500 and the Yaesu FTDX10

2022-05-05 Thread Joe Subich, W4TV 



To which connector did your KAT500/FTdx1200 tuner cable attach?

The Tuner jacks are the same on both FTdx1200 and FTdx10 as are
the "Linear" jacks.


73,

   ... Joe, W4TV


On 2022-05-05 3:17 PM, Greg Chartrand via Elecraft wrote:

I just purchased a ftdx10 and wondered if the band data cable is the same as 
the one I had with my old ftdx1200.
Thanks,W7MY-Greg ChartrandRichland, WA.



__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] KX3 Option Advice Wanted

2022-05-05 Thread Ed Cole 

I ordered the "kit" version when the first one's were offered (sn 475).

I got everything except paddle (not a CW operator) or the battery 
charger (use either external battery or use it mobile/in shack).


I did get the 2m module as 144 is IF of my mw transverters (1w drive 
level) where SSB is prime mode. Microwave* shots are typically from 
shore line or hill (mountain) top in semi-portable operation.


I use it with the KXPA-100 for mobile, where I have 25w 2m booster to 
drive 150w amp.  80w on HF/6m is fine for mobile.


I got options with thoughts of resale value (later on).

73, Ed - KL7UW
*3400MHz & 10GHz
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] KAT 500 and the Yaesu FTDX10

2022-05-05 Thread Greg Chartrand via Elecraft 
I just purchased a ftdx10 and wondered if the band data cable is the same as 
the one I had with my old ftdx1200.
Thanks,W7MY-Greg ChartrandRichland, WA. 
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Re: [Elecraft] I need some guidance - KAT500

2022-05-05 Thread Lyn Norstad 
Mike -

I leave my KAT500 set in Manual mode at all times.  On bands where the SWR
on my EDZ is acceptable (based on the SWR Threshold I have set for Bypass)
it switches to Bypass automatically.  It will switch back, if needed, when I
change bands.

Firmware ver. 02.05 (but I think it has always worked that way).

73
Lyn, WØLEN



-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Mike Flowers
Sent: Thursday, May 05, 2022 9:46 AM
To: elecraft@mailman.qth.net; elecraft...@yahoogroups.com
Subject: [Elecraft] I need some guidance - KAT500

Hello Elecrafters,

 

I am running a K3-based K-Line: K3-P3-KAT500-KPS500.

 

Currently, I have two antennas connected to my KAT500: ANT 1 is my SteppIR
40/30 3L, and ANT 3 is my 160M/80M dipole.

 

When I have my K3 select 40M/20M/17M/15M/12M/10M/6M, my KAT500 is in BYP
mode and ANT 1 as expected.

 

On 30M, my SteppIR requires some matching and I have trained the KAT500 to
match the SteppIR on 30M.  This works fine if I remember to switch the
KAT500 to MAN before transmitting on 30M.

 

On 160M and 80M, the KAT500 selects the ANT 3 correctly, but stays in BYP
mode and I must switch the KAT500 to MAN to use the KAT500 matching
parameters.

 

I've been operating this way for 10 years and I'm quite use to these
methods.

 

However, it has occurred to me that there may be a way of configuring the
KAT500 so that:

 

*   When I have the K3 select 30M, the KAT500 selects MAN mode ANT 1,
and then if 40M/20M/17M/15M/12M/10M/6M is selected, the KAT500 would return
to BYP mode on ANT1.

 

*   When I have the K3 select 160m or 80M, the KAT500 would select MAN
mode ANT 3, and then if 40M/20M/17M/15M/12M/10M/6M is selected, the KAT500
would return to BYP mode ANT1.

 

It appears to me that once my KAT500 is in BYP mode, it remains in BYP mode
for whichever band/ANT is selected until changed by the MODE button, and
once in MAN mode, it remains in that mode until manually changed.

 

I've worked with the KAT500 Utility to try to achieve this more automatic
switching of antennas and KAT500 modes by band but have not yet succeeded.
I've read through the manual, but I cannot find what I need to accomplish
this.

 

Your guidance would be most appreciated.  Thanks!

 

- 73 and good DX de Mike,   K6MKF, NCDXC
  Vice-President 2021-2022 - In pursuit of
DXCELLENCE!

 

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to l...@lnainc.com 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

[Elecraft] I need some guidance - KAT500

2022-05-05 Thread Mike Flowers 
Hello Elecrafters,

 

I am running a K3-based K-Line: K3-P3-KAT500-KPS500.

 

Currently, I have two antennas connected to my KAT500: ANT 1 is my SteppIR
40/30 3L, and ANT 3 is my 160M/80M dipole.

 

When I have my K3 select 40M/20M/17M/15M/12M/10M/6M, my KAT500 is in BYP
mode and ANT 1 as expected.

 

On 30M, my SteppIR requires some matching and I have trained the KAT500 to
match the SteppIR on 30M.  This works fine if I remember to switch the
KAT500 to MAN before transmitting on 30M.

 

On 160M and 80M, the KAT500 selects the ANT 3 correctly, but stays in BYP
mode and I must switch the KAT500 to MAN to use the KAT500 matching
parameters.

 

I've been operating this way for 10 years and I'm quite use to these
methods.

 

However, it has occurred to me that there may be a way of configuring the
KAT500 so that:

 

*   When I have the K3 select 30M, the KAT500 selects MAN mode ANT 1,
and then if 40M/20M/17M/15M/12M/10M/6M is selected, the KAT500 would return
to BYP mode on ANT1.

 

*   When I have the K3 select 160m or 80M, the KAT500 would select MAN
mode ANT 3, and then if 40M/20M/17M/15M/12M/10M/6M is selected, the KAT500
would return to BYP mode ANT1.

 

It appears to me that once my KAT500 is in BYP mode, it remains in BYP mode
for whichever band/ANT is selected until changed by the MODE button, and
once in MAN mode, it remains in that mode until manually changed.

 

I've worked with the KAT500 Utility to try to achieve this more automatic
switching of antennas and KAT500 modes by band but have not yet succeeded.
I've read through the manual, but I cannot find what I need to accomplish
this.

 

Your guidance would be most appreciated.  Thanks!

 

- 73 and good DX de Mike,   K6MKF, NCDXC
  Vice-President 2021-2022 - In pursuit of
DXCELLENCE!

 

 

__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com