Re: [Elecraft] dead K2
On 6/21/2024 11:24 AM, Oscar Castillo wrote: hello everyone, , the coaxial that carries the RF from the board to the tunner was loose (the ground part of the coax was broken), in the physical inspection everything looks fine, no "pop" was heard, There was no smoke anywhere or a burning smell, so I have no idea where to start, any advice would be greatly appreciated. It's been a long time since I sold my K2s, but I have more recent experience with K3s, and I had a problem with one of those mini-coax jumpers. Elecraft can send some to you. And if it's a female connector that solders to a board, they can send you that. 73, Jim K9YC __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] dead K2
Oscar, First remove the KAT2 from the K2 entirely, including the cable to the control board. Then connect a dummy load to the BNC on the lower rear panel. Try transmitting (do a TUNE) and see if there is any RF. If there is, you are fortunate, fix the coax ground to the KAT2 and put it back together. If not, you have some troubleshooting to do. Get an RF Probe (or an oscilloscope) and follow the procedure for troubleshooting that is printed near the back of the K2 manual (download if you do not have a printed copy). Until you find the failure point, that is all I can tell you. A serial number will be helpful. You might also contact Elecraft support, and Dave W8FGU can likely help as well - he is the official contact for support on the legacy gear (K1, K2, KX1). 73, Don W3FPR On 6/21/2024 2:24 PM, Oscar Castillo wrote: hello everyone, Several years ago I bought my K2 and I have been very happy since then, but a month ago tragedy struck my life. I noticed that the radio was "deaf", so I did a tuning cycle and my radio turned off completely, I checked everything on the outside and it looked good, I checked the power and it was fine (13.2 v), the antenna was fine, so I removed the top cover and that was where I saw the "big problem", the coaxial that carries the RF from the board to the tunner was loose (the ground part of the coax was broken), in the physical inspection everything looks fine, no "pop" was heard, There was no smoke anywhere or a burning smell, so I have no idea where to start, any advice would be greatly appreciated. I bought the radio assembled and it has the following modules KAF2 KSB2 KNB2 K160M KIO2 KAT2 I really hope that you guys cand help me, it´s hard to find a place to fix it here in Mexico, and the shipping cost to send it to the US are really high. best regards to all of you Oscar XE2IF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] dead K2
hello everyone, Several years ago I bought my K2 and I have been very happy since then, but a month ago tragedy struck my life. I noticed that the radio was "deaf", so I did a tuning cycle and my radio turned off completely, I checked everything on the outside and it looked good, I checked the power and it was fine (13.2 v), the antenna was fine, so I removed the top cover and that was where I saw the "big problem", the coaxial that carries the RF from the board to the tunner was loose (the ground part of the coax was broken), in the physical inspection everything looks fine, no "pop" was heard, There was no smoke anywhere or a burning smell, so I have no idea where to start, any advice would be greatly appreciated. I bought the radio assembled and it has the following modules KAF2 KSB2 KNB2 K160M KIO2 KAT2 I really hope that you guys cand help me, it´s hard to find a place to fix it here in Mexico, and the shipping cost to send it to the US are really high. best regards to all of you Oscar XE2IF __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Elecraft K2
N5GT [n5gt@gmail.com], elecraft@mailman.qth.net subject For Sale K2100 with KAT100-1 contact me at gmail.com On Thu, Jun 20, 2024 at 8:42 PM W3FPR wrote: > The K2 is not discontinued and will not be in the near future, but the > KPA100 and the KAT100 have been discontinued. > The KAT2 is still available if you want to operate at 10 to 15 watts > output. > If you want 100 watts and the KAT100 tuner, you will have to ask if > anyone has one or the other for sale. > > An alternative is the KX3 with the KAT3 tuner, but if you need 100 > watts, you can easily add the KXPA100 and the KXAT3 tuner. That will > work seamlessly with the KX3 at 0 to 100 watts. > > The K2 is for those who want to "solder their own" The KX3 (or the KX2 > offer a non-build it yourself solution - although there is no soldering > for either one. > > At 12 to 15 watts, the K2 plus the KAT2 does a great job - as does the > KX3 (or KX2 with the low power tuner. > > As I said, if you need 100 watts, go for the KXPA100 with the KXPA100 ATU. > > 73, > Don W3FPR > > On 6/20/2024 6:43 PM, Larry Boekeloo wrote: > > HI group > > > > I've been thinking about purchasing a nice used K2 but I've noticed > > Elecraft doesn't have the KAT100 tuner anymore. Has there been any talk > to > > discontinuing the K2? > > > > Thoughts? > > > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n5gt@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX2 mobile operation in Iceland
Thanks to those who called - the radio performed well, allowing me to work 3 continents from various parks in Iceland. The portability-to-features ratio of the KX2 can't be beat. Here is a video of it in action from the cramped quarters of a tiny rental car with a roof-mounted vertical. All activity was on 15, 17 and 20 meter CW. Some drone video precedes the radio portion: https://www.youtube.com/watch?v=mXBhKqoQLeA 73, John AE5X https://ae5x.blogspot.com/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K2 receive problem
I would suspect a bad relay associated the 40m lowpass filter -- or a bad solder connection to one of those relays. 73, Victor, 4X6GP Rehovot, Israel Formerly K2VCO CWops no. 5 http://www.qsl.net/k2vco On 21/06/2024 3:55 pm, Jos Weitenberg wrote: I have the following problem with my K2, when I switch on the K2, sometimes the 40m band is deaf. If I then switch to 30m and back to 40m, the reception is good again. Or if I switch on the transmitter in the 40m and go back to reception, the reception is normal again. Does anyone have any idea where I should look for this? 73’s Jos pa3hgx Verstuurd vanaf mijn iPhone __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to k2vco@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K2 receive problem
I have the following problem with my K2, when I switch on the K2, sometimes the 40m band is deaf. If I then switch to 30m and back to 40m, the reception is good again. Or if I switch on the transmitter in the 40m and go back to reception, the reception is normal again. Does anyone have any idea where I should look for this? 73’s Jos pa3hgx Verstuurd vanaf mijn iPhone __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com