The radio was sitting by 50 amp astron power supply which was on.
Moved radio up to bedroom this morning w/ dummy load, powered by an optima
blue top deep cycle battery. Same results. Could tune in to CW signal using
yaesu radio in basement.
Ordered the optional VCOSHLDKT today anyway since the K2 will end up down by
the power supply.
On Oct 22, 2012, at 7:23 AM, Don Wilhelm wrote:
> Calvin,
>
> Do you have anything with a transformer within 2 feet of the K2? If so,
> isolate the K2 by moving it away from everything and see if the ripple goes
> away.
>
> If the problem disappears with the isolation, you can install the optional
> VCOSHLDKT which shields the VFO inductor.
>
> 73,
> Don W3FPR
>
> On 10/21/2012 11:04 PM, Calvin Jones wrote:
>> Hello, First time posting to the list.
>>
>> Completed K2 #7239 today. Made a contact with a station on cw, 10 watts,
>> 7.1065 mhz. He reported back that my CW signal had a very heavy ripple on
>> the signal.
>>
>> I connected the output to a Oscilloscope and was able to see a ripple on the
>> waveform when keying a solid carrier at a few watts. Also listened to my
>> signal on another receiver and could hear a very bad modulated CW tone.
>>
>> This is a barebones K2 with no options installed at this point. Every
>> measurement in the testing was all within specs and the alignment of the
>> radio had no problems. Power output on all bands was OK.
>>
>> Thanks for any help in correcting this problem.
>> __
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft@mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html