Re: [Elecraft] KP3A circuit ?
Andy, yes indeed I had a closer look and it seems that the left pin on P68A is by factory. I compared pictures of the pa board at google and there it is the same depend on board revision. 73's Erwin/DK5EW Member of the Team of MMMonVHF your premium VHF.DX resource in the internet can be found at: http://www.MMMonVHF.de Personal Homepage: http://www.dk5ew.com <http://www.dk5ew.com> 70MHz.de - die deutsche 4m Seite: http://www.70mhz.de Andy Durbin schrieb am 13.04.2020 14:21 (GMT +02:00): > "Found out also that there is a brocken pin at the PA board at jumper at > P68A > male connector. This brocken pin still remains in the according female > connector. > So lots of problems." > > I don't know this module but Elecraft "keys" some connectors by removing a > male > pin and plugging the corresponding female pin. Are you sure what you are > seeing > is not intended keying? > > 73, > Andy, k3wyc > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: > http://www.qsl.net/donate.html > Message delivered to dk...@darc.de > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] KP3A circuit ?
I have found now the circuit at the elecraft ftp server. Found out also that there is a brocken pin at the PA board at jumper at P68A male connector. This brocken pin still remains in the according female connector. So lots of problems. 73's Erwin/DK5EW Erwin Witt - DK5EW schrieb am 13.04.2020 10:41 (GMT +02:00): > Does anybody has the circuit diagram of the KP3A module ? I have board > revision > C. > > Thank you ! > > 73's Erwin/DK5EW > > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: > http://www.qsl.net/donate.html > Message delivered to dk...@darc.de > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KP3A circuit ?
Does anybody has the circuit diagram of the KP3A module ? I have board revision C. Thank you ! 73's Erwin/DK5EW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] chk braker ?
OK it was the backside fuse I pulled it in now. When turning now the power knob K3 is switching off, voltage on ps is going down and K3 PA unit is getting quick vry hot. Next is I disable pa unit. 73's Erwin/DK5EW Member of the Team of MMMonVHF your premium VHF.DX resource in the internet can be found at: http://www.MMMonVHF.de Personal Homepage: http://www.dk5ew.com <http://www.dk5ew.com> 70MHz.de - die deutsche 4m Seite: http://www.70mhz.de Erwin Witt - DK5EW schrieb am 13.04.2020 08:53 (GMT +02:00): > Hi all, > > one more question pse: > > > I have seen in the display once a message when turning power knob named > "chk > breaker" > Not sure if message name is correct it comes only ones and seldom. > > Any idea on that ? > > 73's Erwin/DK5EW > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: > http://www.qsl.net/donate.html > Message delivered to dk...@darc.de > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] chk braker ?
Hi all, one more question pse: I have seen in the display once a message when turning power knob named "chk breaker" Not sure if message name is correct it comes only ones and seldom. Any idea on that ? 73's Erwin/DK5EW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Power can be set only to 12W on 100W version-AK5X response
Thanks guys, I will check that all again and contact elecraft as well. happy eastern to you all and take care. 73s Erwin/DK5EW William Hammond schrieb am 12.04.2020 20:15 (GMT +02:00): > Hi Erwin, > Some plenary troubleshooting might include making sure your power cables > and > connections are secure. The K3 is very sensitive to low (voltage) power. > Change > the metering to see voltage. Observe it on RX and TX. Also observe the > current. > Writing to Elecraft tech support is always a good option. No one has the > troubleshooting experience on the K3 like that that crew. I suspect they > have > defined troubleshooting steps for this problem. > > I would be suspicious of the power. > > 73, Bill-AK5X > > > On Apr 12, 2020, at 11:53 AM, Erwin Witt - DK5EW wrote: > > > > > > Hi all, > > > > suddenly I can set the power of my K3/100W version with the power knob > on > > shortwave only to max 12W and on 6m only to 8W. > > > > That all happened when I was operating on shortwave the K3 got's > suddenly > > very hot. Hope that the finals did not shot. > > I checked the KPA3 setting it is on "nor". > > > > Any help on that ? > > > > 73's Erwin/DK5EW > > > > PS: now Text email not html hope it arrives > > > > > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: > > http://www.qsl.net/donate.html > > Message delivered to a...@mac.com > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Power can be set only to 12W on 100W version
__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Power can be set only to 12W on 100W version
Hi Dick, yes it is as I wrote: the setting in PA below line KPA3 is on "nor" 3's Erwin/DK5EW RIchard Williams schrieb am 12.04.2020 18:57 (GMT +02:00): > > > Erwin, > > > In Config hold MENU in for about three seconds. Then use the B VFO knob > and go to PA, and make sure it says PA nor. If not turn the A VFO until it > does say "nor". > > > Dick, K8ZTT > > > Flying is the second greatest thrill known to man. > > > What is first, you ask? Landing, of course. > > > On Sunday, April 12, 2020, 10:53:44 AM MDT, Erwin Witt - DK5EW > wrote: > > > __ > > > Elecraft mailing list > > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > > Help: http://mailman.qth.net/mmfaq.htm > > > Post: mailto:Elecraft@mailman.qth.net > <mailto:Elecraft@mailman.qth.net> > > > This list hosted by: http://www.qsl.net > > > Please help support this email list: > http://www.qsl.net/donate.html > > > Message delivered to richarddw1...@yahoo.com > <mailto:richarddw1...@yahoo.com> > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Power can be set only to 12W on 100W version
Hi all, suddenly I can set the power of my K3/100W version with the power knob on shortwave only to max 12W and on 6m only to 8W. That all happened when I was operating on shortwave the K3 got's suddenly very hot. Hope that the finals did not shot. I checked the KPA3 setting it is on "nor". Any help on that ? 73's Erwin/DK5EW PS: now Text email not html hope it arrives __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Power can be set only to 12W on 100W version
__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K4 Question
SRI I always send as html will give blank email. Will rock more than a few worlds ? OK I hope it will have 4m as well . Erwin/DK5EW 73's Erwin/DK5EW Member of the Team of MMMonVHF your premium VHF.DX resource in the internet can be found at: http://www.MMMonVHF.de Personal Homepage: http://www.dk5ew.com <http://www.dk5ew.com> 70MHz.de - die deutsche 4m Seite: http://www.70mhz.de Paul Van Dyke schrieb am 19.09.2019 20:56 (GMT +02:00): > No you have not, there are many things that they are playing their cards > real close and we do not know about. > I am sure the K4 will rock more than a few worlds > > Paul KB9AVO > > > > On Thu, Sep 19, 2019 at 2:11 PM Joel Hallas > wrote: > > > I have been very impressed with the architecture and features of the K4, > as > > announced. I was able to hear Eric describe the ideas behind it at the > > Boxboro ARRL convention a few weeks back, and think it will be a fine > > addition to the line. > > > > The one feature I didn't hear about, and didn't think to ask at the > time, > > was what the plans are for coverage of our two new LF and MF bands. The > K4 > > brochure indicates both that "Frequency Range: 100 kHz - 54 MHz..." > likely > > referring to the receive range, and that "Basic K4 XCVR provides 160-6 m > > all > > mode coverage." > > > > I wonder if the basic K4 will transceive at all on the new bands. > Perhaps I > > missed that discussion? > > > > Regards, Joel Hallas, W1ZR > > Westport, CT > > > > > > > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: > > http://www.qsl.net/donate.html > > Message delivered to pvandyke1...@gmail.com > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: > http://www.qsl.net/donate.html > Message delivered to dk...@darc.de > > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K4 Question
__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] HI SIG
Hi all, last evening I switched on my K3 and got direct "HI SIG" in the display. I dsconnected all cables but still the same. K3 is not RXing anything anymore. Strange thing is that the morning I was operating my K3 (serial # 5776) as normal and switched off after. 4 days before I updated firmware to latest one but had no problem last days when operating. Any help on that ? 73's Erwin/DK5EW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] HI SIG in display
__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] HI SIG in display
__ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 deaf on 6m comparing to a FCDP+ ?
Hi dear Rudi, yes so far I learned that a preamp is needed for serious 6m operation with the K3. TNX for your info as well. * As you write you use also the FCDP+. How do you use it together with the K3 ? Is there any circuit out there ? Or better is there any hint to connect it to the K3? * Would be nice to have such a solution. * 73's Erwin/DK5EW Am 31.07.2013 20:54, schrieb hb9...@bluewin.ch: Hi Erwin, I own an "old" K3 (#1212) and a FCDP+ too. Without a PR-6 (or an other low noise preamp) i admit that the FCDP+ is better on 6m, speaking of sensitivity only. I bought the PR-6 after the K3, when i was a little bit disappointed with the K3 6m sensitivity. My best 73, Rudi, HB9ARI Message d'origine De: dk...@mmmonvhf.de Date: 31.07.2013 06:59 À: "Elecraft Reflector" Objet: [Elecraft] K3 deaf on 6m comparing to a FCDP+ ? Hi everybody, since I own a FunVubeDonglePro+ I think my K3 is a bit deaf comparing those 2 rigs on same antenna. Even with switched on preamp on the K3 it's sensitivity is worse to the FCDP+ I only heard about that the K3 is deaf on 6m but never had a comparison. Is there a fix to make the K3 hearing better on 6m ? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 deaf on 6m comparing to a FCDP+ ?
Hi Olli, right I will do so ! 73's Erwin/DK5EW Am 31.07.2013 18:56, schrieb Oliver Dröse: Hi Erwin, second that. I use the Extra-6 by HA8ET for the K3 and you already have an Extra-2 so you know their quality. ;-) Besides this it is way cheaper than the PR6 by Elecraft. ;-) 73, Olli - DH8BQA - Original Message - From: "Johnny Siu" To: ; "Elecraft Reflector" Sent: Wednesday, July 31, 2013 3:52 PM Subject: [Elecraft] K3 deaf on 6m comparing to a FCDP+ ? Hello Erwin, No doubt K3 is deaf in 6m. This is the reason why there is PR-6 or PR6-10 pre-amp offered by Elecraft. Upon the installation of those pre-amp, K3 is in par with other radios in 6m under the same class. Apart from the choices from Elecraft, you may consider http://www.ha8et.hu/ extra-6 which is contest grade pre-amplifier. To be fair to K3, if local RF noise is high in your area, pre-amp will not help you anyway. TNX & 73, Johnny VR2XMC ____ 寄件人︰ DK5EW 收件人︰ Elecraft Reflector 傳送日期︰ 2013年07月31日 (週三) 12:59 PM 主題︰ [Elecraft] K3 deaf on 6m comparing to a FCDP+ ? Hi everybody, since I own a FunVubeDonglePro+ I think my K3 is a bit deaf comparing those 2 rigs on same antenna. Even with switched on preamp on the K3 it's sensitivity is worse to the FCDP+ I only heard about that the K3 is deaf on 6m but never had a comparison. Is there a fix to make the K3 hearing better on 6m ? -- best regards Erwin/DK5EW http://www.mmmonvhf.de/- The leading VHF - DX Portal News - Reviews - QSL Informations - Database - Propagation We do spread weekly VHF-DX-Newsletter www.mmmonvhf.de/nletter/newsletter.php __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net/ Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html - E-Mail ist virenfrei. Von AVG überprüft - www.avg.de Version: 2013.0.3392 / Virendatenbank: 3209/6536 - Ausgabedatum: 30.07.2013 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 deaf on 6m comparing to a FCDP+ ?
Hi everybody, since I own a FunVubeDonglePro+ I think my K3 is a bit deaf comparing those 2 rigs on same antenna. Even with switched on preamp on the K3 it's sensitivity is worse to the FCDP+ I only heard about that the K3 is deaf on 6m but never had a comparison. Is there a fix to make the K3 hearing better on 6m ? -- best regards Erwin/DK5EW http://www.MMMonVHF.de - The leading VHF - DX Portal News - Reviews - QSL Informations - Database - Propagation We do spread weekly VHF-DX-Newsletter www.mmmonvhf.de/nletter/newsletter.php __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] High SWR
TNX all for private messages. I got the hint to bypass the tuner. Then the real SWR is shown . 73's Erwin/DK5EW http://www.dk5ew.de Am 22.04.2012 15:35, schrieb DK5EW: > Hi all, > I used my K3 only with transverter on 2m. Now the 6m season is starting > and I connected it to my 6m beam. > On 50 MHz as I pushed TX I got "high SWR" message. K3 SWR meter showing > 3:1 bad SWR. > I measured with my mini vna analyser the antenna and it is perfect. SWR > real is 1:1 > So it must be a failure in the K3 ? > Yes I have a tuner build in BUT thought SWR must be perfect without tuning ? > Or is it necessary to use tuner if build in ? When I tune SWR is 1:1.1 > Please further info if possible. > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] High SWR
Hi all, I used my K3 only with transverter on 2m. Now the 6m season is starting and I connected it to my 6m beam. On 50 MHz as I pushed TX I got "high SWR" message. K3 SWR meter showing 3:1 bad SWR. I measured with my mini vna analyser the antenna and it is perfect. SWR real is 1:1 So it must be a failure in the K3 ? Yes I have a tuner build in BUT thought SWR must be perfect without tuning ? Or is it necessary to use tuner if build in ? When I tune SWR is 1:1.1 Please further info if possible. -- best regards Erwin/DK5EW __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Does this headset look familiar ?
That looks nice and costs only 50 Euro. Technical data's are ok. Seems to be worth for a test. The next higher version is also nice: http://www.monacor.de/produkte/buehnen-und-dj-equipment/produktauflistung/produktdetailseite/?artikelid=133 73's Erwin/DK5EW Am 18.02.2012 14:00, schrieb Win Kriegl DK9IP/KH7CD: > http://www.monacor.de/en/product-detail-page/?artikelid=2961 > > > 73 Win DK9IP > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > > - eMail ist virenfrei. Von AVG überprüft - www.avg.de Version: 10.0.1424 / Virendatenbank: 2112/4816 - Ausgabedatum: 17.02.2012 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Filter installing question
TNX all for answering ! So I understand I have to use 2.7KHz for TX and all others for RX only. Switching RX filters on XFIL between 2.1 and 2.7 KHz best regards Erwin/DK5EW http://www.dk5ew.de - eMail ist virenfrei. Von AVG überprüft - www.avg.de Version: 10.0.1424 / Virendatenbank: 2112/4811 - Ausgabedatum: 15.02.2012 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Filter installing question
Hi all, I have a small understanding problem in using filters. I installed a additional SSB filter 2.1KHz/8pol on row 3. (1. is FM and 2. is 2.7KHz). I configured new 2.1KHz filter FL3_BW and set it with number 3 to 2.10, FL3_Freq to 0.00, FL3_GN to 0db, FL3_ON to YES _What I do not understand:_ On menu FL_TX_SB is now FL2 so I TX now with FL2(2.7KHz) ? Do I have to switch there on FL3 to transmit with FL3 (2.1KHz) ? Can I switch between filters in operating ? Is it then only in RX between 2.1KHz and 2.7KHz filter ? And TX filter is always that one I configured in FLTX_SB menu ? Thanks for reading ! -- best regards Erwin/DK5EW - eMail ist virenfrei. Von AVG überprüft - www.avg.de Version: 10.0.1424 / Virendatenbank: 2112/4810 - Ausgabedatum: 14.02.2012 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 transport box ?
Hi all, I guess many of you use the K3 as well portable. As I have only a /p QTH where I use my K3 I'm looking for a nice transport box or suitcase with K3 fitted foam or foamed material. I'm interested what kind of transport box you use ? best regards Erwin/DK5EW - eMail ist virenfrei. Von AVG überprüft - www.avg.de Version: 10.0.1411 / Virendatenbank: 1522/3964 - Ausgabedatum: 20.10.2011 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] noise on SSB modulation
Hi all, I did manage it now by reducing mic and comp so its fine now. All settings was to much with 25 - now it is 10/15 with the HEIL. Thanks for fast answer - a good reflector ! I like it !;-) 73's Erwin/DK5EW Am 23.09.2011 12:39, schrieb DK5EW: > Hi all, > I use at my K3 a HEIL PRO SET ELITE "IC", I had this as I use it at my > old ICOM IC-275H as well. > Now I recognised that I have a small noise on modulation like a fan that > gives me some power output when I just push PTT. > OK I have in my shack 2 additional fans for cooling the PA so I switched > them of. The noise is lower but still there. > and there are no other noise sources. So my setting for the HEIL headset > are: > - MIC: 25 > - CMR: 25 > - MIC SEL: RP + HIGH BIAS > - MIC+LIN: OFF > Do you have any idea if I can change setting to cancel that noise ? > I can not believe that the microphone is that sensitive to pick up all > little noises around. > best regards Erwin/DK5EW > > > > - > eMail ist virenfrei. > Von AVG überprüft - www.avg.de > Version: 10.0.1410 / Virendatenbank: 1520/3913 - Ausgabedatum: 22.09.2011 > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > > - eMail ist virenfrei. Von AVG überprüft - www.avg.de Version: 10.0.1410 / Virendatenbank: 1520/3913 - Ausgabedatum: 22.09.2011 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] noise on SSB modulation
Dear Buck, thanks for your tips but I'm not sure if I have to do any mor because my K3 is brand new ! It came 05.September 2011 and has serial 5776. 73's Erwin/DK5EW Am 23.09.2011 13:24, schrieb Buck k4ia: > It is not a fan, it is RF or other noise getting back into the mic > circuit. I had the same problem. Check the two mods on the Elecraft K3 > Enhancements and Application Notes page. Look for Older K3 Mods> > "Front Panel Microphone" and "Improving the Immunity of the real panel > RS232 and audio connectors" to see if they apply to your rig's serial > number. Do both to solve your problem. > > > Buck > k4ia > K3 # 101 > > On 9/23/2011 6:39 AM, DK5EW wrote: >> Hi all, >> I use at my K3 a HEIL PRO SET ELITE "IC", I had this as I use it at my >> old ICOM IC-275H as well. >> Now I recognised that I have a small noise on modulation like a fan that >> gives me some power output when I just push PTT. >> OK I have in my shack 2 additional fans for cooling the PA so I switched >> them of. The noise is lower but still there. >> and there are no other noise sources. So my setting for the HEIL headset >> are: >> - MIC: 25 >> - CMR: 25 >> - MIC SEL: RP + HIGH BIAS >> - MIC+LIN: OFF >> Do you have any idea if I can change setting to cancel that noise ? >> I can not believe that the microphone is that sensitive to pick up all >> little noises around. >> best regards Erwin/DK5EW >> >> >> >> - >> eMail ist virenfrei. >> Von AVG überprüft - www.avg.de >> Version: 10.0.1410 / Virendatenbank: 1520/3913 - Ausgabedatum: 22.09.2011 >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > > - eMail ist virenfrei. Von AVG überprüft - www.avg.de Version: 10.0.1410 / Virendatenbank: 1520/3913 - Ausgabedatum: 22.09.2011 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] noise on SSB modulation
Hi all, I use at my K3 a HEIL PRO SET ELITE "IC", I had this as I use it at my old ICOM IC-275H as well. Now I recognised that I have a small noise on modulation like a fan that gives me some power output when I just push PTT. OK I have in my shack 2 additional fans for cooling the PA so I switched them of. The noise is lower but still there. and there are no other noise sources. So my setting for the HEIL headset are: - MIC: 25 - CMR: 25 - MIC SEL: RP + HIGH BIAS - MIC+LIN: OFF Do you have any idea if I can change setting to cancel that noise ? I can not believe that the microphone is that sensitive to pick up all little noises around. best regards Erwin/DK5EW - eMail ist virenfrei. Von AVG überprüft - www.avg.de Version: 10.0.1410 / Virendatenbank: 1520/3913 - Ausgabedatum: 22.09.2011 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Transverter + K3 power problem
Hi all, I discover a problem using a external transverter with the K3 - this machine is going to cost me nerves ! I use a external transverter for 144 MHz using XVTR out/in break out BNC. When I'm in ssb mode and push xmit "without connected any microphone" my transverter shows power up to his max. of 60w. When I switch K3 monitor on -> level 50 there is a noise like a motor from a driving car. So there must be Pout from K3. Also I can't regulate the power on the K3 for driving the transverter. Same is in DATA-A mode. In FM mode this effect is not there. I checked all I could in the config menu but did not any fault setting. Any help on this strange problem ? best regards Erwin/DK5EW - eMail ist virenfrei. Von AVG überprüft - www.avg.de Version: 10.0.1410 / Virendatenbank: 1520/3912 - Ausgabedatum: 22.09.2011 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] K3 read out for a macro
Hi all, is the a possibility to read out the K3 settings and save it as a macro ? best regards Erwin/DK5EW -- best regards Erwin/DK5EW - eMail ist virenfrei. Von AVG überprüft - www.avg.de Version: 10.0.1410 / Virendatenbank: 1520/3910 - Ausgabedatum: 21.09.2011 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] com port PTT question
TNX all for advice. ! I tried via RS232/USB FTDI but that caused problems with WSJT. As I want to use also CAT I decided to go via 15pol ACC and PC's com 1. Now I made that simple npn transistor solution and that works fine now. 73's Erwin/DK5EW http://www.dk5ew.de Am 20.09.2011 19:13, schrieb Cady, Fred: > You can connect your PC's com port to the K3's com port and use either RTS or > DTR to key the radio. Have a look at the PTT-KEY configuration menu item in > your owner's manual. Section 3.3.2 in "The Elecraft K3: Design, > Configuration, and Operation" describes how to do this in greater detail. An > excerpt is: > > "There are at least four ways to key your K3 with a computer. The first is to > use the RTS or DTR signals in the RS232 serial port connector. Your computer > program must be able to send CW (and operate the push-to-talk, if needed) by > activating the RTS and DTR lines. The K3 converts the RS232 signal levels > (see Appendix B) to the required computer logic levels. The CONFIG:PTT-KEY > menu allows you to choose which of the two RS232 signals is used for PTT and > which is used for Keying. Table 3 12 shows the CONFIG:PTT-KEY menu to set up > for computer keying and PTT. When using this method, make sure CONFIG:PTT-KEY > and the computer program keying and PTT choices are the same." > > > > Fred Cady > fcady at ke7x dot com > "The Elecraft K3: Design, Configuration, and Operation" > www.ke7x.com > > >> -Original Message- >> From: elecraft-boun...@mailman.qth.net [mailto:elecraft- >> boun...@mailman.qth.net] On Behalf Of iain macdonnell - N6ML >> Sent: Tuesday, September 20, 2011 9:58 AM >> To: dk...@mmmonvhf.de >> Cc: Elecraft@mailman.qth.net >> Subject: Re: [Elecraft] com port PTT question >> >> Hi Erwin, >> >> You can't connect the COM port directly to the ACC port - you need a >> transistor in the middle to convert the high/low voltages to a "pull >> to ground". Interfaces like the ones described at: >> >> http://www.dxlabsuite.com/dxlabwiki/FSKConnection >> >> would work. >> >> 73, >> >> ~iain / N6ML >> >> >> >> On Tue, Sep 20, 2011 at 3:42 PM, DK5EW wrote: >>> Hello all, >>> I have a small problem with PTT via com port and ACC plug. >>> I made a 2 pin cable 9pol from PC to ACC 15pol to K3. >>> I soldered pin 4 for PTT and pin 5 for ground. >>> I tested it for correct wire and short - all O.K. >>> Now as soon I connect the TRX-ACC and the com port (serial 9 pin) to >> my >>> PC the K3 goes on TX. >>> Any solution out there ? >>> >>> -- >>> best regards >>> Erwin/DK5EW >>> >>> >>> >>> >>> - >>> eMail ist virenfrei. >>> Von AVG überprüft - www.avg.de >>> Version: 10.0.1410 / Virendatenbank: 1520/3907 - Ausgabedatum: >> 19.09.2011 >>> __ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Elecraft@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html > - eMail ist virenfrei. Von AVG überprüft - www.avg.de Version: 10.0.1410 / Virendatenbank: 1520/3908 - Ausgabedatum: 20.09.2011 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] com port PTT question
Hello all, I have a small problem with PTT via com port and ACC plug. I made a 2 pin cable 9pol from PC to ACC 15pol to K3. I soldered pin 4 for PTT and pin 5 for ground. I tested it for correct wire and short - all O.K. Now as soon I connect the TRX-ACC and the com port (serial 9 pin) to my PC the K3 goes on TX. Any solution out there ? -- best regards Erwin/DK5EW - eMail ist virenfrei. Von AVG überprüft - www.avg.de Version: 10.0.1410 / Virendatenbank: 1520/3907 - Ausgabedatum: 19.09.2011 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] FTDI driver and virtual com port
Hi all, does anybody use the virtual com port driver by FTDI ? I found this on the FTDI homepage: http://www.ftdichip.com/Drivers/VCP.htm How do I have to use it ? I need to set up different com ports for running wsjt software for PPT port and cat for logging ec.. 73's Erwin/DK5EW - eMail ist virenfrei. Von AVG überprüft - www.avg.de Version: 10.0.1410 / Virendatenbank: 1520/3900 - Ausgabedatum: 16.09.2011 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] TX inhibit question
TNX for the max. 5V information. I can manage that. best regards Erwin/DK5EW MMMonVHF - Beacon manager Meteorscatter contest manager http://www.MMMonVHF.de - The leading VHF - DX Portal News - Reviews - QSL Informations - Database - Propagation We do spread weekly VHF-DX-Newsletter www.mmmonvhf.de/nletter/newsletter.php Am 09.09.2011 20:46, schrieb Joe Subich, W4TV: >> Pin 7 is connected to the front panel microcontroller with a series >> 220 ohm resistor. The microcontroller on the front panel is a 5 >> volt part so I wouldn't apply any voltages greater than 5 volts (or >> the maximum logic high voltage.) > The alternative would be to install a 4.7K - 10K resistor between the > external 13.8V inhibit source and the K3 inhibit output (as N0SS did > in the Quadra/K3 cable). The resistor would limit the current into > the microcontroller to a safe level in all cases. Another option is > to install a 5.1V zener diode across the inhibit input (or output of > the sequencer with the appropriate current limiting resistor) to keep > the voltage on the K3 "inhibit input" from exceeding 5V. > > 73, > > ... Joe, W4TV > > > On 9/9/2011 10:48 AM, Cady, Fred wrote: >> Hello Erwin, >> Pin 7 is connected to the front panel microcontroller with a series 220 ohm >> resistor. The microcontroller on the front panel is a 5 volt part so I >> wouldn't apply any voltages greater than 5 volts (or the maximum logic high >> voltage.) >> >> 73, >> Fred >> KE7X >> >> Fred Cady >> fcady at ieee dot org >> "The Elecraft K3: Design, Configuration and Operation" >> www.ke7x.com >> >> (Lulu has 20% discount for the K3 book until midnight 9/9 - SEPTEMBER305 - >> and 15% through 9/30 - AWESOME305. See www.ke7x.com.) >> >> >>> -Original Message- >>> From: elecraft-boun...@mailman.qth.net [mailto:elecraft- >>> boun...@mailman.qth.net] On Behalf Of DK5EW >>> Sent: Friday, September 09, 2011 8:22 AM >>> To: Elecraft@mailman.qth.net >>> Subject: [Elecraft] TX inhibit question >>> >>> Hi all, >>> since 05.September I'm proud owner of a K3 # 5776. >>> Now I work trough the manual from side 1 to end to understand function. >>> >>> As I use a sequencer to protect my LNA's I will use also the RX inhibit >>> function. >>> The sequencer will provides 13VDC in RX mode to the ACC connector at >>> pin 7. >>> I understand I have to set CONFIG: TX INH to high. But can I use 13VDC >>> to that pin 7 or better >>> what's the maximum voltage can be there at pin 7? >>> >>> -- >>> best regards >>> Erwin/DK5EW >>> >>> >>> >>> >>> >>> - >>> eMail ist virenfrei. >>> Von AVG überprüft - www.avg.de >>> Version: 10.0.1392 / Virendatenbank: 1520/3885 - Ausgabedatum: >>> 08.09.2011 >>> __ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:Elecraft@mailman.qth.net >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >> __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > > - eMail ist virenfrei. Von AVG überprüft - www.avg.de Version: 10.0.1392 / Virendatenbank: 1520/3886 - Ausgabedatum: 09.09.2011 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] TX inhibit question
Hi all, since 05.September I'm proud owner of a K3 # 5776. Now I work trough the manual from side 1 to end to understand function. As I use a sequencer to protect my LNA's I will use also the RX inhibit function. The sequencer will provides 13VDC in RX mode to the ACC connector at pin 7. I understand I have to set CONFIG: TX INH to high. But can I use 13VDC to that pin 7 or better what's the maximum voltage can be there at pin 7? -- best regards Erwin/DK5EW - eMail ist virenfrei. Von AVG überprüft - www.avg.de Version: 10.0.1392 / Virendatenbank: 1520/3885 - Ausgabedatum: 08.09.2011 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] want to buy a K3 - what options do I need ?
Hello dear Gene and Hello all, yes you are right I will post here what I will order finally that maybe others with similar interests can see. I will mainly use that K3 on 144MHz with a transverter in EME and meteorscatter as well on 2m contest. Further more I will use it very seldom on short wave/6m and I'm not a CW operator. So the list maybe different to others with other interests. _My personal final configuration is:_ K3/100-F KA3T-F KBPF3 KDVR3 KFL3A-2.8-2.7sw KFL3B-FM KTCXO3-1 KXV3A K3STFNR For transverter my choice is the HA1YA ME2HT-PRO Link: http://ha1ya.config.hu/htmkepek/me2t_protransverterspec.htm Later I plan to add the subrx unit and the DSP Panadapter best regards Erwin/DK5EW http://www.dk5ew.de Am 29.08.2011 19:01, schrieb Eugene Balinski: > Please do list your final configuration so others may > learn. > > 73 and thanks, > > Gene K1NR > > > On Mon, 29 Aug 2011 18:53:06 +0200 > DK5EW wrote: >> Hello all, >> I received mni emails what best is to buy for my case. >> Now I have the >> overview. >> THANK YOU ALL VERY MUCH ! THIS IS A VERY NICE AND ACTIVE >> REFLECTOR ! >> I plan to order 30.09.2011 >> I really look forward being a proud owner of a K3. >> >> -- >> best regards >> Erwin/DK5EW >> >> MMMonVHF - Beacon manager >> Meteorscatter contest manager >> >> http://www.MMMonVHF.de - The leading VHF - DX Portal >> News - Reviews - QSL Informations - Database - >> Propagation >> >> We do spread weekly VHF-DX-Newsletter >> www.mmmonvhf.de/nletter/newsletter.php >> >> >> >> >> - >> eMail ist virenfrei. >> Von AVG überprüft - www.avg.de >> Version: 10.0.1392 / Virendatenbank: 1520/3865 - >> Ausgabedatum: 29.08.2011 >> > __ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: >> http://www.qsl.net/donate.html > - > Web mail provided by NuNet, Inc. The Premier National provider. > http://www.nni.com/ > > > - eMail ist virenfrei. Von AVG überprüft - www.avg.de Version: 10.0.1392 / Virendatenbank: 1520/3865 - Ausgabedatum: 29.08.2011 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] want to buy a K3 - what options do I need ?
Hello all, I received mni emails what best is to buy for my case. Now I have the overview. THANK YOU ALL VERY MUCH ! THIS IS A VERY NICE AND ACTIVE REFLECTOR ! I plan to order 30.09.2011 I really look forward being a proud owner of a K3. -- best regards Erwin/DK5EW MMMonVHF - Beacon manager Meteorscatter contest manager http://www.MMMonVHF.de - The leading VHF - DX Portal News - Reviews - QSL Informations - Database - Propagation We do spread weekly VHF-DX-Newsletter www.mmmonvhf.de/nletter/newsletter.php - eMail ist virenfrei. Von AVG überprüft - www.avg.de Version: 10.0.1392 / Virendatenbank: 1520/3865 - Ausgabedatum: 29.08.2011 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] want to buy a K3 - what options do I need ?
Hello all, sri to ask you here but I'm brand new to the K3. I want to buy a K3 and don't know really what I all need. Main is a K3/10-F - that is clear. I want to use it with a external transverter for 144MHz like a Kuhne/DEMI/HA1YA I do not see clear what else I need for it. Mainly I wish to operate in 2m digital modes EME/MS and using it for contest on2m. So any help is welcome. -- best regards Erwin/DK5EW MMMonVHF - Beacon manager Meteorscatter contest manager http://www.MMMonVHF.de - The leading VHF - DX Portal News - Reviews - QSL Informations - Database - Propagation We do spread weekly VHF-DX-Newsletter www.mmmonvhf.de/nletter/newsletter.php - eMail ist virenfrei. Von AVG überprüft - www.avg.de Version: 10.0.1392 / Virendatenbank: 1520/3863 - Ausgabedatum: 28.08.2011 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html