Re: [Elecraft] K3 Tx audio coming through speaker
Hi, Many thanks to Don, Jim and others who took the time to answer my post, it was the MON setting that was causing the issue I must have inadvertently changed it as Don said below, now all working fine again. I’m glad it was only finger trouble. Once again many thanks for the help it was very much appreciated. 73 de Graham G7NEH On 30 Apr 2014, at 21:07, Don Wilhelm w3...@embarqmail.com wrote: Graham, Turn on TX TEST mode and see if that condition is still present. If it is, double check the MON setting to be certain you did not inadvertently change it while trying to adjust the power level or compression. If it is gone with TX TEST, next try it while transmitting into a dummy load. If it is still gone with the dummy load, I would suggest you look to see what has changed in your antenna system because at that point I would suspect some type of RF feedback. 73, Don W3FPR On 4/30/2014 3:51 PM, Graham Pemberton wrote: Hi, Yes, definitely coming from the K3 I have not got anything connected at all apart from the antenna. Graham __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 Tx audio coming through speaker
Hi all, After working perfectly for awhile my K3 has developed the following problem, when I key the mike and transmit in SSB mode the audo is coming through the speaker while i’m transmitting, I have not got monitor turned on and this happens wether using the internal speaker or headphones. I’m hoping this is just caused by me altering a parameter in the menu’s that I shouldn’t have done. Thank you in advance for your help Regards Graham G7NEH K3/100 #8095 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 and Kantronics TNC
Hi, Many thanks to all who replied to my post the other day, I now know how to cable the TNC to the K3 and will be making them up soon. Regards Graham G7NEH On 15 Apr 2014, at 16:51, Graham Pemberton G7NEH grahampemberton...@btinternet.com wrote: Hi all, Sorry if this is off topic, I have just put together my K3 s/n 08095 with the following options, KPA3, KAT3 and KXV3A I plan to add more options later when I’ve saved up some more cash. The K3 is working fine and is such a joy to use, one thing I am planning on doing is wiring up a Kantronics KAM XL tnc to the K3 to try some pactor, I’m a bit confused on this, do I have to go from the KAM XL to the RS232 port and the audio in/out connectors on the K3 or can I just use the RS232 port on the K3. any guidance on this would be gratefully received Regards Graham G7NEH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to grahampemberton...@btinternet.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 and Kantronics TNC
Hi all, Sorry if this is off topic, I have just put together my K3 s/n 08095 with the following options, KPA3, KAT3 and KXV3A I plan to add more options later when I’ve saved up some more cash. The K3 is working fine and is such a joy to use, one thing I am planning on doing is wiring up a Kantronics KAM XL tnc to the K3 to try some pactor, I’m a bit confused on this, do I have to go from the KAM XL to the RS232 port and the audio in/out connectors on the K3 or can I just use the RS232 port on the K3. any guidance on this would be gratefully received Regards Graham G7NEH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KX3 Not shutting down correctly
Hi all, I have KX3 s/n 5464 running firmware 1.79, I find that when I turn the radio off I see a row of * astrix’s (can’t spell) appear on the VFO B display area, reading the manual this would indicate that the KX3 has not shutdown correctly, I have tried a forced firmware load but when I get to step 4 in the manual and open the KX3 utility all I get is the KX3 is not responding and nothing else happens. I am running OSX 10.9.1 and the latest version of the KX3 utility Any advice welcome Regards Graham Pemberton G7NEH __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] KX3 and P3 question
Hi all, Just like to say a big thank you to all who replied to my question, it looks like the software option is the way to go for now I will look around for something that will run on my Mac, I think that I should be able to use DSPradio by DL2SDR and put the P3 on the wish list for now along with the K3. Regards Graham G7NEH On 27 Nov 2013, at 19:48, Barry LaZar k3...@comcast.net wrote: Graham, I don't know if the P3 can be interfaced easily with the KX3, but what I have been telling folk who want a good spectrum display for their KX3 is to use NaP3 and a good quality sound card. Elecraft was really smart by making the I Q data available directly on the side of the radio. What that means is that all you need to do is run these two channels into the input of your sound card and run the software. You will now have a fully integrated display with your KX3 at a very reasonable cost. One of the reasons I bought the KX3 was my inference that I could do this. and, I was correct. NaP3 is a subset of the Flexradio PowerSDR software and is quite good. This allows you to use either the radioss audio or sound card's audio using the capabilities of the software. Which is best? Both. There are some advantages to each and I love them equally. My new sound card was $150 from Sweatwater delivered. I have an EMU by Creative labs, but that is a little temperamental on my Win7 64 system, but it was only $100. You can make a P3 function with a KX3, I assume. But it is going to require some engineering and surgery. I think I would go with the simplest first as a trial. You might just want to stay with that configuration. Right now, there are at least 5 of us using the easy way and all seem happy. 73, Barry K3NDM On 11/27/2013 9:06 AM, Stephen Prior wrote: Graham, Elecraft did write, in an email a year or so back, that they might be producing an adaptor which would allow the KX3 to work with the P3. Whether it is still on the cards I don't know. 73 Stephen G4SJP On 27 November 2013 13:53, Graham Pemberton G7NEH grahampemberton...@btinternet.com wrote: Hi all, I am just waiting for my KX3 kit to be delivered and was looking at the P3 Panadapter for a future purchase, how well does the P3 integrate with the KX3 ? My apologies if this has been asked before. Regards Graham G7NEH Cheshire UK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] KX3 and P3 question
Hi all, I am just waiting for my KX3 kit to be delivered and was looking at the P3 Panadapter for a future purchase, how well does the P3 integrate with the KX3 ? My apologies if this has been asked before. Regards Graham G7NEH Cheshire UK __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html