Re: [Elecraft] K3 competition from Icom?
If your PC has a open PCI slot there are high speed serial cards still available. Think I paid $26 for the last one I purchased. 73 Matt W5LL On Mon, 2008-08-25 at 07:24 -0500, R. Kevin Stover wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > > > DOUGLAS ZWIEBEL wrote: > > http://www.ab4oj.com/icom/ic7600/main.html > > > > not in my opinion! > > > > de Doug KR2Q > - -- > Me neither but they did do something Elecraft had the chance to do and > didn't. USB ports for rig control. I've always considered a Serial to > USB adapter as a " box of chocolates", you never know what you're going > to get. Whether it works or not depends entirely on the chip set used > and the quality of the driver. > > Elecraft should have used USB ports. You can't buy a desktop motherboard > by any respected manufacturer that includes a serial port. The LGA 775 > board I'm looking at for an upgrade has zero serial ports but 8 on the > mobo backplane and you can add four more to the front or back of the > case with cables and unused motherboard USB headers. > > It might be a trivial redesign of the KIO3 but I'm sure it's down the > list if at all. > > R. Kevin Stover, ACØH > -BEGIN PGP SIGNATURE- > Version: GnuPG v1.4.7 (MingW32) > Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org > > iD8DBQFIsqSO11jxjloa2wsRAhlYAKCJuH3yC61SWoDVuOa7CN5UW/t9mgCePddV > mj7zMmXYzAXQJxI0YUNlDhM= > =FR1Z > -END PGP SIGNATURE- > > No virus found in this outgoing message. > Checked by AVG - http://www.avg.com > Version: 8.0.138 / Virus Database: 270.6.7/1631 - Release Date: 8/24/2008 > 12:15 PM > > ___ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] "build" is not a noun
Okay, time to throw up the BS flag. What does this have anything to do with Elecraft? 73 Matt W5LL On Mon, 2008-08-11 at 04:58 -0700, Darwin, Keith wrote: > I too am concerned about the erosion of English, but "build" as a noun > does not bother me (or Webster for that matter). > > "Got" really bothers me. The worst is "American's Got Talent". Sheesh, > gimme a break. It should be "America has talent". America may have > talent, but with a title like that, it makes sound like idiots ... I > think the show actually is a take-off of a show if the same "got" name > from the UK?? > > Wy OT. Don't get me started complaining about the US media's > coverage of the Olympics LOL! > > - Keith N1AS - > - K3 711 - > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Charles Harpole > Sent: Monday, August 11, 2008 3:19 AM > To: [EMAIL PROTECTED]; [EMAIL PROTECTED] > Cc: elecraft@mailman.qth.net > Subject: [Elecraft] "build" is not a noun > > > Please help the English language maintain some > > little bit of coherence and do not use "build" as > > a noun, as in "Did we do a build today?" > > Better and already established as English, > > and not techno-speak, is "Did you build it today?" > > Is Eubonics next? > > Thanks so much, 73 > > > Charles Harpole > > [EMAIL PROTECTED] > > > > > > ___ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > ___ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 delivery require signature?
You're right.. It doesn't have anything to do with the operation of a K3 but it does have everything to do with receiving your K3 from Elecraft and if you will be required to be there to accept delivery of the package. Some of us still work and don't have the luxury of being retired and home all day waiting for UPS to show up. I see people posting stuff to this forum all the time that doesn't have anything to do with the operation of a K3 and nothing every gets said about that stuff. W5LL Stan King wrote: What does any of this thread have to do with the operation of a K3 -- Let's put this one to bed people. If you have a gripe or policy question about Elecraft shipping take it where it belongs - the telephone number is 831-662-8345. W4KR - Original Message ----- From: "Matt Patterson" <[EMAIL PROTECTED]> To: Sent: Monday, July 14, 2008 10:28 AM Subject: Re: [Elecraft] K3 delivery require signature? I learned my lesson with this. I sold a TS-2000 and had it shipped and insured via UPS. UPS delivers it and the guy isn't there so they leave it on the front porch. His house just so happens to be adjacent to a city bus stop! He gets home to find that the package is no longer on his front porch like the tracking information online says. UPS calls the driver and they confirm it was left on the porch. I refund the money that I was paid for the stolen radio and 4 months later I finally get UPS to cut a check for the insurance. All of this could have been prevented by requiring a signature which I will do from now on. On high priced items it makes sense for the shipper to require a signature. 73 Matt W5LL Don Wilhelm wrote: Bill, Only if you ask that it be required. With the good tracking tools available with UPS, I really don't understand why anyone would want to require a signature on delivery - especially for delivery to a residence since there is always a chance that no one would be home when the UPS man arrives. Take my situation as an example - the UPS man usually arrives around 12:30. If the XYL and I have chosen to go out for lunch that day, I would miss the delivery and it would be delayed until the next day. Yes, we receive frequent UPS shipments, maybe an average of 3 per week. 73, Don W3FPR KB1PXD wrote: Can anyone tell me if the K3 shipment via UPS requires signature? - Bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 delivery require signature?
I learned my lesson with this. I sold a TS-2000 and had it shipped and insured via UPS. UPS delivers it and the guy isn't there so they leave it on the front porch. His house just so happens to be adjacent to a city bus stop! He gets home to find that the package is no longer on his front porch like the tracking information online says. UPS calls the driver and they confirm it was left on the porch. I refund the money that I was paid for the stolen radio and 4 months later I finally get UPS to cut a check for the insurance. All of this could have been prevented by requiring a signature which I will do from now on. On high priced items it makes sense for the shipper to require a signature. 73 Matt W5LL Don Wilhelm wrote: Bill, Only if you ask that it be required. With the good tracking tools available with UPS, I really don't understand why anyone would want to require a signature on delivery - especially for delivery to a residence since there is always a chance that no one would be home when the UPS man arrives. Take my situation as an example - the UPS man usually arrives around 12:30. If the XYL and I have chosen to go out for lunch that day, I would miss the delivery and it would be delayed until the next day. Yes, we receive frequent UPS shipments, maybe an average of 3 per week. 73, Don W3FPR KB1PXD wrote: Can anyone tell me if the K3 shipment via UPS requires signature? - Bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Pelican Case for K2
Jim, Thanks for the info! That case sounds exactly like what I'm looking for. I'm looking for something that will allow me to take my K2 along on trips and things like that. 73 Matt W5LL Jim Wiley wrote: Matt - Consider also the Samsonite L25 soft-side case. This is a small version of a laptop case, and it fits the K2 perfectly. There is room for the K2, a Kenwood MC-43 microphone, a Palm-Paddle, a small laptop 12V power supply to use as a battery charger, the K2 instruction booklet, power cables, a folding headset, some basic antenna materials, and a few other bits. It has lots of zipper pouches to accommodate loose stuff. It also has a pair of Velcro straps inside the main case that fit snugly over the main K2 to keep it in place. Not bad for about $36 on Amazon.com. I have used one of these cases for some time now. No damage to the K2 or any of it's accessories, ever. Another advantage - it is about the size of a woman's purse (and it has a carry strap), and so far I have successfully convinced airline types that it should fit under the same rules that allow women to carry a handbag and not have it charged against my baggage or carry-on allowance. This is one time where "non-discrimination" rules work in my favor! - Jim, KL7CC Matt Patterson wrote: I'm curious for those of you who use a Pelican case to carry around your K2 what model you're using. There are several to choose from and was curious if there's an accepted model that fits the K2 the best. I'm looking at the 1450. 73 Matt W5LL ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Pelican Case for K2
I'm curious for those of you who use a Pelican case to carry around your K2 what model you're using. There are several to choose from and was curious if there's an accepted model that fits the K2 the best. I'm looking at the 1450. 73 Matt W5LL ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] good mic for K2
I'm looking for ideas on a good handheld mic for the K2. My K2 is wired up for the Kenwood 8 pin standard. 73 Matt W5LL ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3: used listing (10 watt)
Most likely to make a nice profit as they are very much in demand right now. It's actually pretty brilliant, wait until after Dayton after thousands of hams have seen the product and dream about owning one, then list it on QTH.com and let the offers roll in. Either that, or he needs gas money. :-) 73 Matt W5LL On Tue, 2008-05-20 at 05:22 -0700, Steve Jackson wrote: > Another K3 on the used market ... > > http://swap.qth.com/search-results.php?keywords=666439&fieldtosearch=ListingNo > > It strikes me as odd to see such listings, personally. > This is a superlative radio, and one that's backordered for months. > Indeed, I am awaiting my own Katiegram in another 4 or 5 weeks. > > Why would someone *sell* one, and in this instance, for the second time? > Oh, well, it's a great opportunity for somebody. > > Steve KZ1X/4 > owner of the World's Most Experienced Elecraft > (and, celebrating my ninth straight year on this reflector) > > > > ___ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Buddipole vs. tuner and wire
Brian, Have you considered something like the YO-YO tenna? www.hamradiofun.com/yoyodeluxe.html They are very nice and compact dipole antenna and can be made to resonant length by only spooling out the correct amount of wire that you need for the particular band you want to work. Hoist it up in a coconut tree as high as you can get it and I think you'd be better off then with the buddipole at ground level. 73 Matt w5LL On Tue, 2008-05-13 at 07:53 -0700, Robert Tellefsen wrote: > Hi Brian > It really depends on what you can find for > antenna supports. A wire dipole cut to frequency > and up in the air higher than you are likely to > raise a Buddipole will do more for you. The > Buddipole makes a nice fallback antenna, but > I'd try for an elevated wire antenna where possible. > 73, Bob N6WG > > - Original Message - > From: "Brian Lloyd" <[EMAIL PROTECTED]> > To: "elecraft Reflector" > Sent: Monday, May 12, 2008 9:57 PM > Subject: [Elecraft] Buddipole vs. tuner and wire > > > > I am heading out on a bit of a DXpedition in a month and will be > > dragging the K2 along with me. I will be in St. Kitts (V4) and > > Dominica (J7). > > > > Thinking about antennas, I was planning to take my SGC-231 tuner and > > some wire but am also looking at the Buddipole (which Elecraft sells > > so that makes it on-topic here :-) as an alternative. > > > > Would anyone care to comment on wire/tuner vs. Buddipole? > > > > -- > > > > 73 de Brian, WB6RQN > > Brian Lloyd - brian HYPHEN wb6rqn AT lloyd DOT com > > > > > > > > ___ > > Elecraft mailing list > > Post to: Elecraft@mailman.qth.net > > You must be a subscriber to post to the list. > > Subscriber Info (Addr. Change, sub, unsub etc.): > > http://mailman.qth.net/mailman/listinfo/elecraft > > > > Help: http://mailman.qth.net/subscribers.htm > > Elecraft web page: http://www.elecraft.com > > ___ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] RE: 6 Meter Antennas - OT
All my loop antennas are KU4ABs. I've never had a bit of problem out of and of them and they are the cheaper choice out of the three. I'd also like to know why you found the PAR to be superior to the others. 73 Matt W5LL Bill W5WVO wrote: Dave, Why? I'm very interested in what about the PAR you thought was clearly superior to the others, especially the M2. Bill W5WVO Dave Agsten wrote: I'd look a PAR Electronics OA-50s for a horizontally polarized omni-directional antenna before the M2s or KU4ABs. I've tried all three and the OA-50 is the only one I still have. 73, Dave N8AG You rock. That's why Blockbuster's offering you one month of Blockbuster Total Access, No Cost. http://tc.deals.yahoo.com/tc/blockbuster/text5.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] OT: Use USPS if you don't care about losing it
> and then the added agony of trying to get any follow up action. With > the other guys (UPS, DHL, FedEx), if you insure it and it is lost, you > get your money prontoand so far, for me, with no questions asked. > > de Doug KR2Q Fact is we've all had our issues with one shipper or another. Mine is with UPS. I'm going to two months now after filing a claim with UPS on a package they left at the front door of the guys house which was then stolen. The guys house is next to a transit bus stop! UPS just left it anyway without getting a signature. So if you ever ship UPS be sure and tell them that you want the signature to be required for delivery. 73 Matt W5LL ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K2: HI CUR warning
Hi, I worked a little bit of the SSB contest this weekend. I noticed last night I received the HI CUR warning a couple of times. The antenna is a 40m delta loop. I have checked the SWR and it never gets above 2:1 on the entire band. I also use the internal ATU to get it down to 1:1 when I'm transmitting. I am using a heil goldline with a HC5 cartridge for the mic and the mic gain was set to 3. I have never had the HI CUR warning occur while operating CW only in SSB. I looked up HI CUR in the manual and it says that it's usually to do with the radio trying to drive the finals at a higher output than what they are rated. I can connect a dummy load and set the radio to 10 watts then hold down the TUNE + DISPLAY buttons to put the radio in tune mode bypassing the ATU and the radio is putting out the correct amount of power which leads me to believe that the issue has something to do with the mic. Do you think I have the mic gain set too high? I have since backed it down to 1 and it hasn't done it since but it wasn't doing it everytime when it was set to 3 so I really don't know if that fixed it or not. Is there anyone else who uses a Heil Goldline with their K2? Am I even going down the right path troubleshooting wise? Or should I be looking at something else? 73 Matt W5LL ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Katiegram - Stay or go, yes or no
Just put it on QTH.com... On Thu, 2008-03-27 at 11:52 -0400, Bob wrote: > Why even go to E-bay? > > I'll bet there are those on the list who pay a premium and take > indirect delivery > for a new unit and skip the waiting in line. > > 73, > Bob > K2TK > > Joseph M. Durnal wrote: > > >How much do you think it would go for on eBay? > > > >On Thu, Mar 27, 2008 at 11:22 AM, Darwin, Keith > ><[EMAIL PROTECTED]> wrote: > > > > > >>Just call me Mr. Waffle. > >> > >> > > > ___ > Elecraft mailing list > Post to: Elecraft@mailman.qth.net > You must be a subscriber to post to the list. > Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/subscribers.htm > Elecraft web page: http://www.elecraft.com > ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K2 and digital modes
Wondering if others are using their K2 on PSK31 and RTTY? I made my first PSK31 contact on the K2 last night and the guy said I had a nice clean signal but I'm curious what settings on the K2 everyone else uses when running these modes. I'm afraid I may have my RF gain set to high on the rig or my audio out set to high on the PC. On my TS-2000 you would increase the volume until the ALC meter just barely started registering then you knew you were good to go. Is there something similar I can do on the K2? 73 Matt W5LL ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] SignaLink USB and K2
Hi, I have a Signalink USB and would like to use it with my K2 which has a 8pin mic connector and is wired up for a Kenwood mic. My question is, do I just use the kenwood pinout for the SLUSB? Is anyone else using a SLUSB with their K2? If so, how do you have your it jumpered? Thanks, Matt W5LL ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Excellent External Speaker for K2
I just use a good ol' set of amplified PC speakers. Works great for me... Or maybe I don't realize what I'm missing since it's the only thing I've ever used?!?!?!!? 73 Matt W5LL K2# 4778 DW Holtman wrote: Hello, On Ebay, the Kenwood SP-230 speaker runs from $85.00 to $202.00, looking at completed auctions. Best, DW Holtman WB7SSN - Original Message - From: "Gary Krause" <[EMAIL PROTECTED]> To: Sent: Monday, March 17, 2008 8:27 PM Subject: Re: [Elecraft] Excellent External Speaker for K2 Hi Jim, I'm using a Kenwood SP-230 speaker with my K2. It also has the audio filters and does a great job with the K2. Gary, N7HTS Jim K4ZMV wrote: After replacing the phone jack on my K2, I have been searching for a really good external speaker. One that allows me to use my headphones and mute the speaker when doing so. Well, I had an old Kenwood SP-180 speaker that I had replaced a bad speaker in with a 4 ohm speaker designed for Collins. This particular equipment has audio filters and accepts a 1/4 inch stereo headphone jack. I cleaned it up and it has been in line now for over an hour. The audio filters really help with CW in QRN and smooth out really strong signals that otherwise had a harsh note as they were tuned across. P49V is on 40 meters and is about 40 over S9 and is smooth as silk. The 1/4 inch headphone jack will help, too, as that is what is on the K3 I have ordered (due in early July). I just wanted to pass this along as one can find the old Kenwood speakers for nearly nothing online or at hamfests and they will help K2 audio. 73, Jim, K4ZMV ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Delivery notice
WOW! They are really starting to make headway on the backlog! 73 Matt W5LL K2# 4778 George Cortez Jr wrote: Delivery notice today for K3/100 ordered on 9-9-2007 shipped 2 day ups so its almost build time! George NE2I ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] FS: K2 Top Cover w/ speaker
I have for sale a K2 top cover with speaker. In excellent condition. $25 shipped. 73 Matt W5LL ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K2# 4778
Recently added the internal ATU, RS232 and battery kits to my K2. Installed them today and she's back up and running just fine! I know you're probably thinking, why post this and waste bandwidth. Well, I have no one else to tell and I'm excited that all the additions worked the first time around! 73 Matt W5LL ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K2: K1EL K40 Keyboard Keyer
Hi, I'm was wondering if there was anyone on this reflector who uses the K1EL K40 with their K2? I am having some difficulty getting mine to key the K2 and was looking for some guidance. I know the K40 works as it works fine with my other rigs but they all work with a mono cable and I notice the K2 manual says a stereo cable is required for external keyers. 73 Matt W5LL ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com