[Elecraft] Thanks for all the feedback regarding Winlink & K3.
Folks, I appreciate all the feedback that I have received. I am now able to link up to Winlink stations reliably with my K3 and my SCS DR-7400. 73, Tony L. (KJ5XF) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Winlink & K3 settings
Folks, I recently set up an SCS DR-7400 with my K3 on Winlink. I must have some settings that are slightly off, since my link up capabilities (HF) are not as reliable as I expected. So, I would appreciate feedback from Winlink users who are actively using their K3. Here is what I am interested in: TNC setup values in Winlink (RMS Express) K3 settings used. 73, Tony Lyon (KJ5XF) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] HRD/DM-780, Elecraft K3 and soundcard
Folks, I want to thank _/*ALL*/_ of you who sent feedback!!! I narrowed the issue I was having with the RX down to the the following: a) The SQUELCH default (25%) was simply too high. I lowered it to 4% b) For some interesting reason, I had to drop the audio input down to about 15%. This level is WA lower than what I need on either MixW or MultiPsk. With the 2 tweaks mentioned above, now copy is where it should. That's what I really enjoy about this Elecraft email list. Lots of good feedback... 73, Tony Lyon (KJ5XF) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] HRD/DM-780, Elecraft K3 and soundcard
Hi Sal, Yes, I went through the Signalink audio level config again and no change. The Signalink pots are also set just like yours. 73, Tony L. (KJ5XF) Hi Tony! Have you gone through the Signalink audio levels config procedure? Is it possible that its just Windows audio levels that are low? All my Signalink pots (except Delay) are usually at 12 o'clock. __ Slava (Sal) B, W2RMS w2...@arrl.net On Jun 24, 2014, at 9:47 PM, Tony Lyon wrote: Folks, I decided to try HRD/DM780 for first time after using another HF digital software program for probably 10 years. I am using an Elecraft K3 and a SignaLink USB interface and both MixW and MultiPSK fine with ZERO problems on either RX or TX. With HRD/DM780 (version 6.2) the K3 will TX fine (great signal reports), but on RX (with the Audio input set between 50-60%), I only get about 90% copy even with a solid OLIVIA signal in the waterfall. I have tried all kinds of SYNC/TUNE Margins (while using OLIVIA) to no avail. I have also tried all different levels of audio RX input to no avail. If someone could share their SignaLink and any K3 LINE-IN/LINE-OUT config values to get DM780 to work I would appreciate it. I have been at this for a week (part time) and still can't get DM780 to work correctly with my K3. There is clearly a parameter I am missing, but the documentation for setting up the soundcard for version is 6.2 is a tad vague. 73, Tony L. (KJ5XF) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to sla...@nullserv.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] HRD/DM-780, Elecraft K3 and soundcard
Hi Steve, I had the slider at about 25% and I moved it all the way to the left. Still no change. 73, Tony L. (KJ5XF) Tony… There is a SQUELCH slider near the top above the receive window (grayish horizontal bar moving). My slider was in the middle and when I moved the slider to the left all the way, I had solid copy. Where is yours set at? 73, Steve K6SAB On Jun 24, 2014, at 6:47 PM, Tony Lyon wrote: Folks, I decided to try HRD/DM780 for first time after using another HF digital software program for probably 10 years. I am using an Elecraft K3 and a SignaLink USB interface and both MixW and MultiPSK fine with ZERO problems on either RX or TX. With HRD/DM780 (version 6.2) the K3 will TX fine (great signal reports), but on RX (with the Audio input set between 50-60%), I only get about 90% copy even with a solid OLIVIA signal in the waterfall. I have tried all kinds of SYNC/TUNE Margins (while using OLIVIA) to no avail. I have also tried all different levels of audio RX input to no avail. If someone could share their SignaLink and any K3 LINE-IN/LINE-OUT config values to get DM780 to work I would appreciate it. I have been at this for a week (part time) and still can't get DM780 to work correctly with my K3. There is clearly a parameter I am missing, but the documentation for setting up the soundcard for version is 6.2 is a tad vague. 73, Tony L. (KJ5XF) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to sabert...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] HRD/DM-780, Elecraft K3 and soundcard
Hi Gerald, My K3 is indeed set to Data Mode. The bandwidth is set correctly and I also have the default settings. I also have re-installed HRD/DM780 I also re-checked the Signalink soundcard settings and they are OK. Still no go... TX is fine, RX drops characters. 73, Tony L. (KJ5XF) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] HRD/DM-780, Elecraft K3 and soundcard
Folks, I decided to try HRD/DM780 for first time after using another HF digital software program for probably 10 years. I am using an Elecraft K3 and a SignaLink USB interface and both MixW and MultiPSK fine with ZERO problems on either RX or TX. With HRD/DM780 (version 6.2) the K3 will TX fine (great signal reports), but on RX (with the Audio input set between 50-60%), I only get about 90% copy even with a solid OLIVIA signal in the waterfall. I have tried all kinds of SYNC/TUNE Margins (while using OLIVIA) to no avail. I have also tried all different levels of audio RX input to no avail. If someone could share their SignaLink and any K3 LINE-IN/LINE-OUT config values to get DM780 to work I would appreciate it. I have been at this for a week (part time) and still can't get DM780 to work correctly with my K3. There is clearly a parameter I am missing, but the documentation for setting up the soundcard for version is 6.2 is a tad vague. 73, Tony L. (KJ5XF) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Found a K3 user in Central TX
Greetings, Thanks to all who responded.. I found a ham here in Austin that will be giving me a demo of his K3 tomorrow afternoon. 73, Tony L. (KJ5XF) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Central Texas K3 Owners
Folks, I submitted a post earlier and it did not show up on the Elecraft email list, so here it goes again I would appreciate it if any K3 owners that reside in Central TX (i.e. Austin, Round-Rock or Georgetown) would be willing to demo of their K3 on the air. I am a CW op and not interested in the SSB characteristics of the K3. CW. I am in the pre-purchase phase and would like to get an idea of how the K3 is like. If someone could help out, I would appreciate it if you could contact me off the list. 73, Tony Lyon (KJ5XF) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] FS: Elecraft K2/100
For sale: Elecraft K2/100 (Serial #: 1933) with SSB and Noise Blanker Modules. Aligned by Alan Wilcox (W3DVX). Will also include the unassembled KAT-100, assembled QRP tuner (KAT-2) and the MH2 hand microphone. I have the manuals and receipts and I'm the original builder. The reason I am selling it is to fund the purchase of a K3/100. If you're interested, send an email to *tonykj5xf at gmail dot com * and I can send detailed pictures of it. $1100 + shipping (CONUSA only) 73, Tony Lyon (KJ5XF) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] FS: K2/100
_*For sale: *_ Elecraft K2/100 (Serial NR: 1933) with the KSB2, KNB2 modules. Recently re-aligned/tuned up by W3DVX (Alan Wilcox). I am the original owner and have all of the associated manuals. It has been in a smoke free environment since it's been built. It also has never been mobile. Pictures available upon request. $1000 + (shipping and insurance costs) Please contact me directly off list... 73, Tony Lyon (KJ5XF) Reason for sale: Selling one of my K2/100's to get funds for my upcoming K3/100... :-) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] FS: K2/100
Selling a K2 (Serial #4295) with the following modules: - 100 watt amp (KPA100) - KAF2 - SSB2 - KNB2 - MH2 Hand Microphone - Blue Denim Cover purchased from Stan LaPointe (K7NUU) I am asking $1100 (+ shipping costs) for it. Will only ship to a U.S. address. If you are interested, let me know and I can also also send some pictures. 73, Tony Lyon (KJ5XF) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] HF Digital interface for the K2...
Don, Thanks for the info. Well, I would like to get 2 of your boards from you... So, what's the cost and where do I mail the check to? 73, Tony L. P.S. Thanks a lot for all of the great hints regarding the AF direct output. I REALLY hope that Elecraft considers adding an HF digital port for the K2 in the futire some time... Hint-Hint... :-) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] HF Digital interface for the K2...
Jamie, Thanks Being able to connect to the J5 connector looks like it will do the trick. I looked in the K2 manual and I noticed that the J5 AF output is derived directly from pins 4 and 5 of the NE602 product detector. So, my next question is:. Does the NE602 have enough output drive to drive the AF input of a RigEXpert? 73, Tony Lyon (KJ5XF) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] HF Digital interface for the K2...
Folks, After wearing out the front panel headphone connector (twice in 2 yearsdue to connecting/disconnecting soundcard cable for HF digital modes) it has become quite obvious that I need a dedicated HF digital interface port for my K2/100. I looked through the LA3ZA K2 mod information and saw that Pauli (EA3BLQ.SK) had a board that would solve the issue that I have. So, here come the questions for my fellow Elecraft K2/100 owners 1) Has anyone on the Elecraft list added a dedicated HF digital port to their K2? 2) Did they use Pauli's board? If not, does anyone have a similar alternative? 73, Tony L. (KJ5XF) P.S. I wonder if Elecraft is thinking about selling an HF digital interface option for their kits... I know I sure would buy one ;-) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com