Re: [Elecraft] K3/100 Value (for insurance)
Replacement would be a K4 right? So I would say a K4 with sub rcvr and Kat if the K3 has them. Mike Kk9v On Sat, Jul 30, 2022, 10:45 AM Paul GACEK via Elecraft < elecraft@mailman.qth.net> wrote: > $2k? > > ……and while not your question, parted out you could get a lot more. > > Paul > W6PNG/M0SNA > www.nomadic.blog > > > On Jul 30, 2022, at 2:38 PM, n...@earthlink.net wrote: > > > > I have a K3/100 S/N 2324 fully loaded (2nd receiver, 8-pole filters, all > > upgrades except USB) that needs to be shipped to Elecraft for repair. > What > > is a suggested value of this for insurance? > > > > 73, > > > > Allen R. Brier N5XZ > > 1515 Windloch Lane > > Richmond, TX 77406 > > 713-705-4801 > > > > > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to paul.ga...@me.com > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to mik...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] Elecraft repair
How do I find out where I am in the RSA list ? On Fri, Jul 15, 2022, 12:15 PM wrote: > This is not a slam against Elecraft repair but I have a need to have my K3+ > problem checked and repaired in short order. I know that Elecraft is backed > up and will not get to my RSA as I am 104 on the list. I need the radio > operational in the next few weeks before my extended journey offshore. > > > > What I am asking the group for is a recommendation of someone very familiar > with K3's they have had work done by or have heard about beyond Elecraft's > service. > > > > Thanks for any help, I really like my radio and other Elecraft gear but > have > a short time frame and need some guidance. > > > > Ciao and 73 > > Hank / KR7X > > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to mik...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Wanted: Elecraft KIO3 & KIO3B
Hi Had a lightning hit a week or so ago. Took out the USB on my K#s and the RS-232 on my K3 along with lots of other items. Anybody have a KIO3 or a KIO3B spare to their needs. Please advise Mike KK9V __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 control software?
Win4k3suite Mike Kk9v On Fri, Aug 13, 2021, 7:12 PM David Bunte wrote: > Bruce - > > I have been using the DXLab suite of modules for logging and rig control. I > think I have been using it for close to ten years and have never wished for > anything else. > > Dave - K9FN > > On Fri, Aug 13, 2021 at 6:35 PM Bruce Wade wrote: > > > What are people using to control the K3? > > Bruce Wade > > __ > > Elecraft mailing list > > Home: http://mailman.qth.net/mailman/listinfo/elecraft > > Help: http://mailman.qth.net/mmfaq.htm > > Post: mailto:Elecraft@mailman.qth.net > > > > This list hosted by: http://www.qsl.net > > Please help support this email list: http://www.qsl.net/donate.html > > Message delivered to dpbu...@gmail.com > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to mik...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 Issue
I had the same issue and it was a bad connection on the TMP cables. I just reseated all of them and all has been OK for me. I hope I didn't just jinx it. Mike KK9V On Sun, Jul 19, 2020 at 12:54 PM wrote: > ok I'm going to be answering several of your suggestions at once here. > > First, when I powered off last night, I used the power button on the K3 > itself, I did not kill the power supply first > > The sub RX has been turned off and the RX Ant is NOT selected. Ant 1 is > selected and the Antenna IS plugged into the port > > The is NO noise shown on the S meter and I have a pretty constant S3 to > S5 > noise here at my qth. > > Regardless of mode selected there is no power output, the display says 0 > > When I activate the tuner, regardless of band, it shows no SWR, says 5 > watts > out, but there is NO POWER OUT of it. It always acts like it is matching, > or > sounds like it is. > > Ronnie > > -Original Message- > From: Bill Frantz > Sent: Sunday, July 19, 2020 11:40 AM > To: w5...@comcast.net > Cc: Ian Kahn ; Elecraft Reflector > Subject: Re: [Elecraft] K3 Issue > > The K3 can get antennas in a bewildering collection of ways. If > the RX antenna switch is on -- and this was my way of getting on > reception -- it might be your problem. The K3 can also send > received signals out on one of the BNC connectors and expect to > get them back on another. > > I recommend a careful reading of the manual, perhaps in PDF form > with a search for "antenna". The manual is downloadable from the > Elecraft web site. > > 73 Bill AE6JV > > On 7/19/20 at 12:10 PM, w5...@comcast.net wrote: > > >yes sir.. using antenna port 1 and have it selected. HOWEVER.. I did > move > >the antenna to port 2 and selected that port to no improvement. Same issue > > --- > Bill Frantz| Privacy is dead, get over | Periwinkle > (408)348-7900 | it. | 150 Rivermead > Rd #235 > www.pwpconsult.com |- Scott McNealy (1999) | Peterborough, > NH 03458 > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to mik...@gmail.com > -- Mike Stokes KK9V __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] Elecraft W2 problem
Hi I have an Elecraft W2 and a HF 2kW coupler which I have a couple of issues with and appreciate any thoughts. #1 - When pressing the Range button the range cycles from 20 W to Auto. When on Auto it defaults to 20 W until transmitting. When in the 20W range (or Auto) all of the SWR leds and the first power led light up. #2 - When cycling through the ranges it skips the 2 W range. I reversed the cable and reloaded the firmware with no issues, Here is a link to a viedo showing what i am talking about. https://1drv.ms/v/s!AtLmO2vBrPixk394MqxJ7BkwiV0w?e=2acerw I appreciate any thoughts. -- Mike Stokes KK9V __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] I note that the mechanical strengthener for the K3 synthesizers is no longer available
I am in the same situation and could use 2 as well. Mike KK9V On Wed, Oct 30, 2019, 3:44 PM andy.nehan--- via Elecraft < elecraft@mailman.qth.net> wrote: > > I recently purchased an older K3 as my rig to take to our clubhouse. So > it does not need to have all the bells and whistles. However, I note > that Electraft no longer sells the mechanical strengtheners for the > original synthesizers (and I have a sub receiver so I have two > synthesizers). > > So does anyone have the old synthesizers complete with strengtheners > that are surplus to requirements that I could purchase?? > > Andy > > G4HUE > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to mik...@gmail.com > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 Gold Pins
I am looking at picking up another K3. Does anyone know what SN# Elecraft started using the gold plated pins ? The owner has no idea. Thanks in advance. -- Mike Stokes KK9V __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] KXV3 question
I bought a used K3 and found that the lower right screw that holds the KXV3t against the rear chassis had fallen out during shipping. I took it apart and found the lock washer and nut. Figure 10 in the manual shows that there should be a spacer attached to the KXV3. The space is there on the top left mounting hole, but not the lower right one. There is no evidence that it was ever one soldered to it. My concerns are 1) Is the space still somewhere in side the radio causing very bad things when I power it up. 2) Without this spacer the KXV3 starts to flex if tightened to much an the KXV3 may short against .the rear plate. If not tightened enough it will vibrate loose again. Can anyone confirm that this spacer should have been on both mounting wholes ? Here is a link to pics of each mounting hole. https://1drv.ms/u/s!ANLmO2vBrPixiTQ 73 Mike Stokes KK9V __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com