Re: [Elecraft] [K3] KUSB+Logger32
Initially Logger32 was was locking all the time when I used KUSB. Downloads from the chip manufacturer did not help. Then some 2 months ago Elecraft posted a new driver, I downloaded it, and everything was fine ever since. This is under Vista. Mike Harris-9 wrote: G'day, Tried using my KUSB today. Loaded latest driver and all communicates well between K3 Utility and K3. I modified the power on banner OK. Changed the com port in Logger32 to the same and after the first read of frequency Logger32 freezes and needs the three finger salute. CPU seems to be running at 100% K3+RS232+Logger32 can be running OK. Change over to KUSB, change the com port in Logger32 and it freezes. KUSB plugged into any USB port on the PC not via a hub. Changed the port speed for both K3 and KUSB from 38400 to 9600 no change. Anyone else seen this? Regards, Mike VP8NO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- View this message in context: http://n2.nabble.com/KUSB%2BLogger32-tp2966594p2968631.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] KUSB+Logger32
Initially Logger32 was was locking all the time when I used KUSB. Downloads from the chip manufacturer did not help. Then some 2 months ago Elecraft posted a new driver, I downloaded it, and everything was fine ever since. This is under Vista. Mike Harris-9 wrote: G'day, Tried using my KUSB today. Loaded latest driver and all communicates well between K3 Utility and K3. I modified the power on banner OK. Changed the com port in Logger32 to the same and after the first read of frequency Logger32 freezes and needs the three finger salute. CPU seems to be running at 100% K3+RS232+Logger32 can be running OK. Change over to KUSB, change the com port in Logger32 and it freezes. KUSB plugged into any USB port on the PC not via a hub. Changed the port speed for both K3 and KUSB from 38400 to 9600 no change. Anyone else seen this? Regards, Mike VP8NO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- View this message in context: http://n2.nabble.com/KUSB%2BLogger32-tp2966594p2968625.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] KUSB+Logger32
Initially Logger32 was was locking all the time when I used KUSB. Downloads from the chip manufacturer did not help. Then some 2 months ago Elecraft posted a new driver, I downloaded it, and everything was fine ever since. This is under Vista. Mike Harris-9 wrote: G'day, Tried using my KUSB today. Loaded latest driver and all communicates well between K3 Utility and K3. I modified the power on banner OK. Changed the com port in Logger32 to the same and after the first read of frequency Logger32 freezes and needs the three finger salute. CPU seems to be running at 100% K3+RS232+Logger32 can be running OK. Change over to KUSB, change the com port in Logger32 and it freezes. KUSB plugged into any USB port on the PC not via a hub. Changed the port speed for both K3 and KUSB from 38400 to 9600 no change. Anyone else seen this? Regards, Mike VP8NO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- View this message in context: http://n2.nabble.com/KUSB%2BLogger32-tp2966594p2968632.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] KUSB+Logger32
Initially Logger32 was was locking all the time when I used KUSB. Downloads from the chip manufacturer did not help. Then some 2 months ago Elecraft posted a new driver, I downloaded it, and everything is fine ever since. This is under Vista. Mike Harris-9 wrote: G'day, Tried using my KUSB today. Loaded latest driver and all communicates well between K3 Utility and K3. I modified the power on banner OK. Changed the com port in Logger32 to the same and after the first read of frequency Logger32 freezes and needs the three finger salute. CPU seems to be running at 100% K3+RS232+Logger32 can be running OK. Change over to KUSB, change the com port in Logger32 and it freezes. KUSB plugged into any USB port on the PC not via a hub. Changed the port speed for both K3 and KUSB from 38400 to 9600 no change. Anyone else seen this? Regards, Mike VP8NO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- View this message in context: http://n2.nabble.com/KUSB%2BLogger32-tp2966594p2968624.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] KUSB+Logger32
Initially Logger32 was was locking all the time when I used KUSB. Downloads from the chip manufacturer did not help. Then some 2 months ago Elecraft posted a new driver, I downloaded it, and everything was fine ever since. This is under Vista. Mike Harris-9 wrote: G'day, Tried using my KUSB today. Loaded latest driver and all communicates well between K3 Utility and K3. I modified the power on banner OK. Changed the com port in Logger32 to the same and after the first read of frequency Logger32 freezes and needs the three finger salute. CPU seems to be running at 100% K3+RS232+Logger32 can be running OK. Change over to KUSB, change the com port in Logger32 and it freezes. KUSB plugged into any USB port on the PC not via a hub. Changed the port speed for both K3 and KUSB from 38400 to 9600 no change. Anyone else seen this? Regards, Mike VP8NO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- View this message in context: http://n2.nabble.com/KUSB%2BLogger32-tp2966594p2968629.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] KUSB+Logger32
Mike, I have been using Logger32 for about 10 years and have had virtually no issues. I currently have 3 USB to serial adapters running on my PC, one for the Yaesu and two connected to the K-3, one for reading the data from the radio into Logger32, the other for the Logger32 CW keyer. At this moment CPU usage is running 2-7% with both Logger32 running and LP-Bridge running. PC is running XP and is a dual core Intel machine. Hope this helps. Mike -N5WNG Mike Harris-9 wrote: G'day, Tried using my KUSB today. Loaded latest driver and all communicates well between K3 Utility and K3. I modified the power on banner OK. Changed the com port in Logger32 to the same and after the first read of frequency Logger32 freezes and needs the three finger salute. CPU seems to be running at 100% K3+RS232+Logger32 can be running OK. Change over to KUSB, change the com port in Logger32 and it freezes. KUSB plugged into any USB port on the PC not via a hub. Changed the port speed for both K3 and KUSB from 38400 to 9600 no change. Anyone else seen this? Regards, Mike VP8NO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html -- View this message in context: http://n2.nabble.com/KUSB%2BLogger32-tp2966594p2969289.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] KUSB+Logger32
http://n2.nabble.com/KUSB-and-Logger32-td1660775.html#a1660775 -- View this message in context: http://n2.nabble.com/KUSB%2BLogger32-tp2966594p2971091.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] KUSB+Logger32
G'day, Sorted, many thanks. Regards, Mike VP8NO - Original Message - From: GM0ELP douglas.maxw...@virgin.net To: elecraft@mailman.qth.net Sent: Monday, May 25, 2009 2:46 PM Subject: Re: [Elecraft] [K3] KUSB+Logger32 | | | http://n2.nabble.com/KUSB-and-Logger32-td1660775.html#a1660775 | -- | View this message in context: http://n2.nabble.com/KUSB%2BLogger32-tp2966594p2971091.html | Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] [K3] KUSB+Logger32
G'day, Tried using my KUSB today. Loaded latest driver and all communicates well between K3 Utility and K3. I modified the power on banner OK. Changed the com port in Logger32 to the same and after the first read of frequency Logger32 freezes and needs the three finger salute. CPU seems to be running at 100% K3+RS232+Logger32 can be running OK. Change over to KUSB, change the com port in Logger32 and it freezes. KUSB plugged into any USB port on the PC not via a hub. Changed the port speed for both K3 and KUSB from 38400 to 9600 no change. Anyone else seen this? Regards, Mike VP8NO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [K3] KUSB+Logger32
Mike Harris-9 wrote: G'day, Tried using my KUSB today. Loaded latest driver and all communicates well between K3 Utility and K3. I modified the power on banner OK. Changed the com port in Logger32 to the same and after the first read of frequency Logger32 freezes and needs the three finger salute. CPU seems to be running at 100% K3+RS232+Logger32 can be running OK. Change over to KUSB, change the com port in Logger32 and it freezes. KUSB plugged into any USB port on the PC not via a hub. Changed the port speed for both K3 and KUSB from 38400 to 9600 no change. Anyone else seen this? Not specifically. However, I believe the KUSB uses the Prolific PL2303 chipset, and I have had problems with other adapters using this chipset which were not experienced when using a real serial port. I obtained a USB adapter using an FTDI chipset which a retailer claimed was more reliable than the Prolific chipset and have not so far experienced any problems with it. - Julian, G4ILO. K2 #392 K3 #222. http://www.g4ilo.com/ G4ILO's Shackhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3 http://www.wota.org.uk/ Wainwrights On The Air -- View this message in context: http://n2.nabble.com/KUSB%2BLogger32-tp2966594p2966753.html Sent from the [K3] mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html