Re: [Elecraft] [K3] Software suggestion: a more prominent TEST indicator
Morse code legends for button pushes would probably be very useful to those who have vision problems (I don't). But ergonomics counts for an awful lot, too. Especially during long sessions at the rig. Being able to access functions without consciously searching for the buttons and then having to shift focus to the display to see what state those buttons are in... this admittedly tiny effort does add up over time. So, I'd place audible/Morse feedback somehat above coolness factor, if not exactly top priority. Also, compared to the K2, the K3 buttons don't have the same satisfactory tactile snap. Even a simple short tone upon button push would add a lot to the operating experience I believe. I'm looking forward to this feature but no, it isn't a top priority. 73, Drew AF2Z On Tue, 01 Jul 2008 20:55:05 -0700, Brett (KC7OTG) wrote: Morse code legends are cool. I always kinda dug that the kenwood would beep the first char of the mode that you just set things to. Now that I'm starting to learn code a little better I start to like them more and more. I'd put them at VERY low priority but do have to admit they're more of a coolness factor than much of anything else. Some of the warnings could benefit from audible nuggets. Such as the High RFI, High SWR, High Current, Batt Low. You know the ones that are warning you to stop your foolishness before you break things. ~Brett (KC7OTG) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] [K3] Software suggestion: a more prominent TEST indicator
HAHA... At FD one of the operators said... Man I really love the way the receiver sounds but NOBODY will come back to me. On his next transmission I noticed that there was no RF showing up on the bar graph. Then I noticed the flashing TX... I mentioned to him that he was in test mode. Poof one button press and miraculously he was getting call backs! :) On Mon, 2008-06-30 at 22:43 -0700, Carl Clawson wrote: It's just too easy to miss the little blinking TX annunciator if you've left your K3 in test mode. How about once in a while doing something more dramatic like scrolling TX TEST across the VFO A display, or flashing the display, or making the SWR and power meter displays flicker in some obnoxious way, or ... The challenge is to think of something that doesn't impair any useful aspect of test mode. 73 thanks for listening, Carl WS7L ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] [K3] Software suggestion: a more prominent TEST indicator
Brett Howard wrote: On Mon, 2008-06-30 at 22:43 -0700, Carl Clawson wrote: It's just too easy to miss the little blinking TX annunciator if you've left your K3 in test mode. How about once in a while doing something more dramatic like scrolling TX TEST across the VFO A display, or flashing the display, or making the SWR and power meter displays flicker in some obnoxious way, or ... The challenge is to think of something that doesn't impair any useful aspect of test mode. HAHA... At FD one of the operators said... Man I really love the way the receiver sounds but NOBODY will come back to me. On his next transmission I noticed that there was no RF showing up on the bar graph. Then I noticed the flashing TX... I mentioned to him that he was in test mode. That's very easily done, especially by a new operator who isn't familiar with the K3's tap/hold functions. One possibility would be to flash the delta-F LED continuously, in sync with the annunciator (as that LED's normal warning function is not needed while in test mode). -- 73 from Ian GM3SEK http://www.ifwtech.co.uk/g3sek ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] [K3] Software suggestion: a more prominent TEST indicator
I'm actually a little more worried the TEST mode will be off when it actually isn't. I like to bang out a few practice lines of code every now and then just to keep the fist limbered up. It is kind of embarrassing to open up on the air with a few stanzas from Kubla Khan or something, thinking the transmitter is disabled... Rather than a bigger visual indication for TEST, I would rather have an audible warning. Say, a distinctive chirp every 5 seconds or so. Perhaps other functions could also benefit from audible annunciatiors/warning chirps. These would be user selectable, of course. Aren't there plans to do this? I thought I read somewhere that audio chirps and Morse Code legends would be addded for various button pushes/functions? 73, Drew AF2Z On Mon, 30 Jun 2008 22:43:51 -0700, Carl WS7L wrote: It's just too easy to miss the little blinking TX annunciator if you've left your K3 in test mode. How about once in a while doing something more dramatic like scrolling TX TEST across the VFO A display, or flashing the display, or making the SWR and power meter displays flicker in some obnoxious way, or ... The challenge is to think of something that doesn't impair any useful aspect of test mode. 73 thanks for listening, Carl WS7L ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] [K3] Software suggestion: a more prominent TEST indicator
The flashing of the RF power meter on the LCD display is a very solid clue to me that the rig is making RF! Ron AC7AC -Original Message- It's just too easy to miss the little blinking TX annunciator if you've left your K3 in test mode. How about once in a while doing something more dramatic like scrolling TX TEST across the VFO A display, or flashing the display, or making the SWR and power meter displays flicker in some obnoxious way, or ... The challenge is to think of something that doesn't impair any useful aspect of test mode. 73 thanks for listening, Carl WS7L ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] [K3] Software suggestion: a more prominent TEST indicator
Morse code legends are cool. I always kinda dug that the kenwood would beep the first char of the mode that you just set things to. Now that I'm starting to learn code a little better I start to like them more and more. I'd put them at VERY low priority but do have to admit they're more of a coolness factor than much of anything else. Some of the warnings could benefit from audible nuggets. Such as the High RFI, High SWR, High Current, Batt Low. You know the ones that are warning you to stop your foolishness before you break things. ~Brett (KC7OTG) On Tue, 2008-07-01 at 07:35 -0400, [EMAIL PROTECTED] wrote: I'm actually a little more worried the TEST mode will be off when it actually isn't. I like to bang out a few practice lines of code every now and then just to keep the fist limbered up. It is kind of embarrassing to open up on the air with a few stanzas from Kubla Khan or something, thinking the transmitter is disabled... Rather than a bigger visual indication for TEST, I would rather have an audible warning. Say, a distinctive chirp every 5 seconds or so. Perhaps other functions could also benefit from audible annunciatiors/warning chirps. These would be user selectable, of course. Aren't there plans to do this? I thought I read somewhere that audio chirps and Morse Code legends would be addded for various button pushes/functions? 73, Drew AF2Z ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] [K3] Software suggestion: a more prominent TEST indicator
It's just too easy to miss the little blinking TX annunciator if you've left your K3 in test mode. How about once in a while doing something more dramatic like scrolling TX TEST across the VFO A display, or flashing the display, or making the SWR and power meter displays flicker in some obnoxious way, or ... The challenge is to think of something that doesn't impair any useful aspect of test mode. 73 thanks for listening, Carl WS7L ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com