Re: [Elecraft] [KX3] Kits & ESD protection
Alan makes some good points. There is nothing wrong with that. They are not wrong but I offer another viewpoint. I think Elecraft is always going to error on the side of safety and assume the builder is going to do the wrong thing, therefore safety to the max. Nevertheless there are good habits that should be learned and they will protect you when you forget to wear the wrist strap. As a consultant I have done ESD audits of factories. If they know the audit is coming all the wrist straps are in place. Surprise audits are another thing. I find the straps and footwear to be rarely used. How can they get away with that? The answer is they have good work habits that avoid ESD problems rather than bleeding off static build up. Here are a few everyday hints the pros use. 1. Wear cotton! Avoid wearing wool, silk, or synthetics when dealing with electronics. 2. Upon entering your work area touch some heavy metal to bleed off any body charge. Always touch the chassis before touching PCBs within the chassis. 3. Always handle a PCB by the edges and never by the circuit or connector. 4. Keep the humidity above 30%. If necessary use a plant mister to spray your work area. 5. Plastic is OK for hardware storage but use metal, such as muffin tins, for electronic parts. If you must use those polystyrene parts bin for semiconductors, line the bins with aluminum foil. 6. Keep the parts in their original shipping containers until you are ready to install them. Think pink! Pink bags are one type antistatic material. The silvery looking bags are another. Both work great. 7. Do not pre-stage your parts by placing them in foam plastic of some kind. 8. Avoid polystyrene foam like the plague. Even a polystyrene cup with coffee in it can hold a 5000 volt charge on the outside. Picking that cup up can transfer that charge to your body without feeling a thing. 73 Fred, AE6QL -Original Message- >From: Alan Bloom >> I usually work on a very good antistatic which is silicone rubber as >> well so hot solder won't affect it, but I do not wear a strap. I just >> put my hands, the boards, etc. on the mat when I work. > >It is possible to be static-safe without a mat or strap, but you have to >be VERY careful about touching things in the right order. One mistake >is all it takes. > >So I recommend that everyone use an anti-static mat and wrist strap when >working on electronic circuitry. However, it has to be a good-quality >mat. Some inexpensive so-called "anti-static" mats in fact do not work >correctly. I posted about this several years ago. See: > __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [KX3] Kits & ESD protection
Earlier today, Slava Baytalskiy (W2RMS) posted ... These are the ESD-related items that I used few weeks ago while building my new K3 ... Seems to have worked since I'm using the K3 and all the tests went fine ... -- Hi Slava, Those products "look" like the real deal. However, only one of the four symptoms of ESD damage is catastrophic failure. The other three being: 1) Shorten product life. 2) Degraded performance. 3) Occasional glitchy / unexplained behavior. My point being that just because your K3 works today, isn't necessarily sufficient evidence that all is well. However, in your case I do believe that all is indeed well. (I've listed these other ESD symptoms for the guys who post on the Reflector about how they never take any ESD precautions, and never have any problems.) 73, Gary Kilo India Four Golf Golf X-ray __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [KX3] Kits & ESD protection
These are the ESD-related items that i used few weeks ago while building my new K3: http://www.amazon.com/gp/product/B004N96WQ0/ref=oh_details_o04_s00_i00?ie=UTF8&psc=1 http://www.amazon.com/gp/product/B009ENYYGU/ref=oh_details_o04_s01_i00?ie=UTF8&psc=1 http://www.amazon.com/gp/product/B00AMCG21C/ref=oh_details_o04_s01_i02?ie=UTF8&psc=1 Seems to have worked since i'm using the K3 and all the tests went fine... Hope this helps. Slava, W2RMS On Apr 6, 2014, at 9:55 AM, Gary W. Hvizdak wrote: > On Sat Apr 5 21:54:01 EDT 2014 Alan Bloom (N1AL) wrote: > > ... it has to be a good-quality mat. Some inexpensive so-called > "anti-static" mats in fact do not work correctly. I posted about this > several years ago. See: > > http://www.mail-archive.com/elecraft%40mailman.qth.net/msg94407.html > > -- > > In addition to being a good quality mat, it also needs to be kept clean, > which mainly means being free of the naturally occurring oils in your skin. > In a pinch this can be done with mild soap and water, but ideally one should > use a solution that's specifically formulated to both clean the mat and > restore its surface conductivity. > > I recommend Techspray Zero Charge Mat & Table Top Cleaner be used at least > every three weeks, more frequently if the mat's surface reflectivity seems > uneven, which is a sure sign of contamination. FYI, the reason for using > this product at least every three weeks is that the surface naturally tends > to dry out over time. > > 73, > Gary Kilo India Four Golf Golf X-ray > > > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to sla...@nullserv.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [KX3] Kits & ESD protection
On Sat Apr 5 21:54:01 EDT 2014 Alan Bloom (N1AL) wrote: ... it has to be a good-quality mat. Some inexpensive so-called "anti-static" mats in fact do not work correctly. I posted about this several years ago. See: http://www.mail-archive.com/elecraft%40mailman.qth.net/msg94407.html -- In addition to being a good quality mat, it also needs to be kept clean, which mainly means being free of the naturally occurring oils in your skin. In a pinch this can be done with mild soap and water, but ideally one should use a solution that's specifically formulated to both clean the mat and restore its surface conductivity. I recommend Techspray Zero Charge Mat & Table Top Cleaner be used at least every three weeks, more frequently if the mat's surface reflectivity seems uneven, which is a sure sign of contamination. FYI, the reason for using this product at least every three weeks is that the surface naturally tends to dry out over time. 73, Gary Kilo India Four Golf Golf X-ray __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [KX3] Kits & ESD protection
On 04/05/2014 05:22 PM, cjac...@gmail.com wrote: I usually work on a very good antistatic which is silicone rubber as well so hot solder won't affect it, but I do not wear a strap. I just put my hands, the boards, etc. on the mat when I work. It is possible to be static-safe without a mat or strap, but you have to be VERY careful about touching things in the right order. One mistake is all it takes. So I recommend that everyone use an anti-static mat and wrist strap when working on electronic circuitry. However, it has to be a good-quality mat. Some inexpensive so-called "anti-static" mats in fact do not work correctly. I posted about this several years ago. See: http://www.mail-archive.com/elecraft%40mailman.qth.net/msg94407.html In that posting I give details of some testing I did and recommendations for how to choose a suitable mat. Alan N1AL __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com