Re: [Elecraft] [P3] Another symmetry question
This "feature" has been commented on in the past. It appears the P3 automatically recomputes the display limits in Fixed Tune mode if the K3 frequency is changed via the RS232 port (i.e., the P3 gets the frequency change command). When I use the Band buttons on the KPA500 to change bands the P3 display limits don't change -- probably because the frequency change is commanded by way of the serial bus between the transceiver and the amp. I also find this quite annoying and would like the P3 to respect my manual settings when a QSY is commanded. 73... Randy, W8FN On 1/8/2018 6:06 PM, Bill Frantz wrote: I think the following issue may be part of the same problem. For the WARC bands, I like to have the P3 set up to show the whole band. When I use wsjt-x to switch to 17M, the P3 changes from showing 100KHz between 18.068 and 18.168 to showing 100KHz from 18.100 to 18.200. Annoying. 73 Bill AE6JV On 1/8/18 at 3:34 PM, k6...@foothill.net (Fred Jensen) wrote: When I change bands using BAND UP/DN, the P3 seems to preserve this configuration from band to band. The same seems to hold when I use direct frequency entry. However, when running N1MM+, typing a frequency into the call sign window will go to that frequency on the radio but will put the span edges at odd 20 KHz boundaries [3510-3530, 3530-3550] and sometimes at 3515-3535. -- Bill Frantz | There are now so many exceptions to the 408-356-8506 | Fourth Amendment that it operates only by www.pwpconsult.com | accident. - William Hugh Murray __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] [P3] Another symmetry question
I think the following issue may be part of the same problem. For the WARC bands, I like to have the P3 set up to show the whole band. When I use wsjt-x to switch to 17M, the P3 changes from showing 100KHz between 18.068 and 18.168 to showing 100KHz from 18.100 to 18.200. Annoying. 73 Bill AE6JV On 1/8/18 at 3:34 PM, k6...@foothill.net (Fred Jensen) wrote: When I change bands using BAND UP/DN, the P3 seems to preserve this configuration from band to band. The same seems to hold when I use direct frequency entry. However, when running N1MM+, typing a frequency into the call sign window will go to that frequency on the radio but will put the span edges at odd 20 KHz boundaries [3510-3530, 3530-3550] and sometimes at 3515-3535. -- Bill Frantz| There are now so many exceptions to the 408-356-8506 | Fourth Amendment that it operates only by www.pwpconsult.com | accident. - William Hugh Murray __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] [P3] Another symmetry question
I have a K3/100. For CW and RTTY below 10 m, I normally run a 20 KHz span with the ends of the span on even 20 KHz boundaries [3500-3520, 3520-3540, etc]. I'm in Fixed Tune mode where the span edges remain fixed and the VFO cursors move as I tune. Tuning off the edge results in a full 20 KHz shift [IAW, a new 20 KHz span]. When I change bands using BAND UP/DN, the P3 seems to preserve this configuration from band to band. The same seems to hold when I use direct frequency entry. However, when running N1MM+, typing a frequency into the call sign window will go to that frequency on the radio but will put the span edges at odd 20 KHz boundaries [3510-3530, 3530-3550] and sometimes at 3515-3535. Does anyone know how the P3 recalculates the span edges on band changes from an external control program? If I knew, I might be able to compensate. 73, Fred ["Skip"] K6DGW Sparks NV DM09dn Washoe County __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com