[Elecraft] K3 and Signallink next the Microham
Thanks for the comments. The Microham is the Keyer II. I have connected the line in,line out and the usb cable to the pc, are there any other connections I need to make?? Yes the multicore cable from the k3 is the one for the k3 it is marked k3. Thanks Ross -Original Message- From: Joe Subich, W4TV Sent: Monday, May 30, 2016 2:21 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] K3 and Signallink next the Microham Next to try and set up the microham for digital work. Which microHAM Interface? In general, set the K3/K3S to DATA mode and select MENU:MIC SEL = LINE IN, set Mic Gain (LINE) to about 15 and configure the microHAM interface audio levels as documented in the "Setting Audio Levels" section of the microHAM Users Manual. As a final "touch up" adjust the K3 "Mic Gain" for four bars of ALC (the fifth bar can flicker). 73, ... Joe, W4TV On 5/29/2016 6:54 PM, Ross wrote: Thanks for all the comments about the signal link. I found the problem when checking Airlink express, I had the volume and tx levels set to almost zero, in Airlink express so whenI reset them to max, everything popped into life and all my other digital programs then worked perfectly. Next to try and set up the microham for digital work. All advice very gratefully accepted. Thanks Ross ZL1WN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to li...@subich.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to rbig...@ihug.co.nz __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 and Signallink next the Microham
> Next to try and set up the microham for digital work. Which microHAM Interface? In general, set the K3/K3S to DATA mode and select MENU:MIC SEL = LINE IN, set Mic Gain (LINE) to about 15 and configure the microHAM interface audio levels as documented in the "Setting Audio Levels" section of the microHAM Users Manual. As a final "touch up" adjust the K3 "Mic Gain" for four bars of ALC (the fifth bar can flicker). 73, ... Joe, W4TV On 5/29/2016 6:54 PM, Ross wrote: Thanks for all the comments about the signal link. I found the problem when checking Airlink express, I had the volume and tx levels set to almost zero, in Airlink express so whenI reset them to max, everything popped into life and all my other digital programs then worked perfectly. Next to try and set up the microham for digital work. All advice very gratefully accepted. Thanks Ross ZL1WN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to li...@subich.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] K3 and Signallink next the Microham
Why would you use two interfaces for digital? 73, Mike NF4L > On May 29, 2016, at 6:54 PM, Ross wrote: > > Thanks for all the comments about the signal link. > I found the problem when checking Airlink express, I had the volume and tx > levels set to almost zero, in Airlink express so whenI reset them to max, > everything popped into life and all my other digital programs then worked > perfectly. > > Next to try and set up the microham for digital work. > All advice very gratefully accepted. > Thanks > Ross > ZL1WN > __ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Elecraft@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to n...@comcast.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] K3 and Signallink next the Microham
Thanks for all the comments about the signal link. I found the problem when checking Airlink express, I had the volume and tx levels set to almost zero, in Airlink express so whenI reset them to max, everything popped into life and all my other digital programs then worked perfectly. Next to try and set up the microham for digital work. All advice very gratefully accepted. Thanks Ross ZL1WN __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com