Re: [Elecraft] 432 transverter?
Will, Several of the critical components of the XV432 are no longer available through reliable sources forcing it to be discontinued. I doubt that you will see a re-design in the near future. 73, Don W3FPR On 7/31/2018 9:08 AM, WILLIE BABER wrote: I guess Elecraft suspended the production of its 432 transverter kt...I went looking to possible purchase one, and it is not listed. Any information as to whether it will be produced again? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
[Elecraft] 432 transverter?
I guess Elecraft suspended the production of its 432 transverter kt...I went looking to possible purchase one, and it is not listed. Any information as to whether it will be produced again? 73, Will, wj9b CWops #1085 CWA Advisor levels II and III http://cwops.org/ __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html Message delivered to arch...@mail-archive.com
Re: [Elecraft] 432 transverter with 2m transverter and satellites
VR2BrettGraham wrote: whether you can change the frequency using the FA; and FB; commands while transmitting - this is essential. The K2 cannot do this. More than that - you can't QSY whilst transmitting. Pretty sure that most of the digital control side of the K2 goes into sleep mode whilst transmitting, to make sure you don't transmit any digital noise. -- Nosey Nick Waterman, Senior Sysadmin. #include stddisclaimer[EMAIL PROTECTED] Joining nudist colony! Must sell washer dryer $300. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] 432 transverter with 2m transverter and satellites
I guess this question is too early but will there be any type of software or hardware interface to put between two K2's or between a 432 and 2m transverter with ONE K2 so that you maybe able to perform inverting and non inverting on the satellites to allow proper tracking of two frequencies? Also will there be software to allow Nova to interface to allow tracking for Doppler. Can this be done with one or two K2's? I guess a little early but something to thing about. I've always dreamed of the possibility of this possibility! 73, Rick N4WYK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] 432 transverter with 2m transverter and satellites
There are quite a few considerations when working with satellites, here's my opinion which is a bit terse as my back hurts and I want to get on with some new code. Ideally you will have two K2's or a K2 and a good second receiver. Myself I have the IC-7800 and IC-703 and will never own the K2 as I have too many toys as it is (I will buy the KX1 as soon as I get home on Friday). I have been waiting for transverters from Elecraft as I want Elecraft's design quailty - the best thought-out hardware there is. The downside to having one K2 is that you can't accurately align your transmit signal to be on the same frequency as the receive, hence the need for second receiver (or transceiver). You may be perfect but the satellite may not :-) Regarding software: solutions exist, the big thing to check with the K2 is whether you can change the frequency using the FA; and FB; commands while transmitting - this is essential. Not all radios allow changing frequency via computer control while you are transmitting. If you can change transmit frequency while transmitting then you are in business with the provisos above. For the future I am waiting for P3E (a high earth orbit satellite) to be launched in spring of 2006, then I will sort out a 23cms and 13cms solution, at the moment I have ideas for this (sadly not Elecraft-based). Then there's the 47 GHz solution to be sorted out (and financed). What I have to do is sort out how I will do the transverter switching betweem IC-7800/IC-703 and the two transverters with cables and things and stuff but to be honest this really just requires a free evening with a few beers. Simon Brown, HB9DRV --- www.hb9drv.ch, www.laax.ch - Original Message - From: Rick Tilton [EMAIL PROTECTED] I guess this question is too early but will there be any type of software or hardware interface to put between two K2's or between a 432 and 2m transverter with ONE K2 so that you maybe able to perform inverting and non inverting on the satellites to allow proper tracking of two frequencies? Also will there be software to allow Nova to interface to allow tracking for Doppler. Can this be done with one or two K2's? I guess a little early but something to thing about. I've always dreamed of the possibility of this possibility! ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] 432 transverter with 2m transverter and satellites
On Tue, 2005-10-18 at 13:45 +0100, Simon Brown wrote: Regarding software: solutions exist, the big thing to check with the K2 is whether you can change the frequency using the FA; and FB; commands while transmitting - this is essential. The K2 cannot do this. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] 432 transverter with 2m transverter and satellites
Then for satellites you are sadly stuffed. But I guess this is a firmware issue which could be 'resolved'. I understand why this may be so, anyway I suggest you band on the door of Eric ever so politely :-) Simon Brown, HB9DRV --- www.hb9drv.ch, www.laax.ch - Original Message - From: Brian Mury [EMAIL PROTECTED] On Tue, 2005-10-18 at 13:45 +0100, Simon Brown wrote: Regarding software: solutions exist, the big thing to check with the K2 is whether you can change the frequency using the FA; and FB; commands while transmitting - this is essential. The K2 cannot do this. ___ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] 432 Transverter availablity?
yep there is one under development but I am not sure when it was due, last call I had with the developer was in the summer and he was a long way off there was also work on a 4m version too (mod of 6m) rgds Simon DL4PLM/GM4PLM From: Doug Shields [EMAIL PROTECTED] Reply-To: Doug Shields [EMAIL PROTECTED] To: Elecraft@mailman.qth.net Subject: [Elecraft] 432 Transverter availablity? Date: Wed, 12 Jan 2005 17:44:28 -0500 Hello all, My curiousity has gotten the better of me and I have to ask. Is there any word on when a 432 MHz transverter will be available? I believe that I heard somewhere that they were working on it. Any ideas? Doug W4DAS ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] 432 Transverter availablity?
Hello all, My curiousity has gotten the better of me and I have to ask. Is there any word on when a 432 MHz transverter will be available? I believe that I heard somewhere that they were working on it. Any ideas? Doug W4DAS ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com